Nickel Fs350 nakup rabljenega (72)

Stanje: rabljeno, Leto izdelave: 2020, Offset tiskalnik s 5 barvami + flexo + rotacijsko izsekovanje Cgsdpfx Ahsx Rc Thoxst Letnik 2020 Stroj opremljen z vodilom traku in registrsko kamero BST

Stanje: rabljeno, Ta oglas se nanaša na vodno kopel Nickel Electro. Cgsdpfjxzh Hrex Ahxjt

Stanje: rabljeno, Ta ponudba se nanaša na termostatirano vodno kopel Nickel Electro Clifton brez mešanja. Naprava je popolnoma delujoča in pripravljena na takojšnjo uporabo. Nickel Electro Clifton vodna kopel je zelo zanesljiva digitalna vodna kopel brez mešanja, namenjena za natančno potapljanje bučk, steklenic in nosilcev v stabilno temperaturno okolje. Idealna je za laboratorije, ki potrebujejo stalno gretje za različne namene—kopel nudi izjemno temperaturno regulacijo in enostavno uporabo. Ključne lastnosti: Stabilno temperaturno okolje: Omogoča stabilno temperaturno območje od 5°C do 99°C, primerno za različne laboratorijske aplikacije. Digitalna kontrola temperature: Opremljena z digitalnim LED zaslonom za enostavno spremljanje in natančne nastavitve temperature preko tipk. Visoka natančnost: Dosega temperaturno natančnost ±0,2°C, kar zagotavlja zanesljive rezultate tudi pri občutljivih eksperimentih. Enakomerna porazdelitev temperature: Temperaturna enakomernost ±0,1°C za dosledno gretje po celotni komori. Vzdržljiva izdelava: Izdelana iz nerjavečega jekla za odpornost proti koroziji in dolgo življenjsko dobo tudi v zahtevnih pogojih. Antibakterijski premaz: Barvane površine so obdelane z antibakterijskim premazom za večjo varnost delovnega okolja. Uporabniku prijazni indikatorji: Osvetljeno stikalo za vklop/izklop in opozorilna lučka za grelnik jasno prikazujeta stanje delovanja. Raznolika dodatna oprema: Opcijski pokrov ali plast iz polipropilenskih krogel zmanjšuje izhlapevanje in tveganje kontaminacije med postopki. Tehnične specifikacije: Temperaturno območje: 5°C do 99°C Natančnost temperature: ±0,2°C Cjdpjxx Aa Ijfx Ahxegt Temperaturna ločljivost: 1°C Enakomernost temperature: ±0,1°C Material komore: nerjaveče jeklo Zaslon: digitalni LED Tip upravljanja: tipke Certifikati/skladnost: CE odobreno Dimenzije (D x Š x V): 332 x 361 x 290 mm (odvisno od modela) Teža: 7,6 kg (odvisno od modela) Moč: 1000 W (odvisno od modela) Frekvenca: 50/60 Hz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Line for the production of circular and square/rectangular tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Other diameter ranges can be achieved by manufacturing an appropriate set of forming rolls. The tube or closed profile is formed by rolling a steel strip of suitable width and thickness using a series of rollers, followed by TIG welding. During production, it undergoes multiple processing operations, including: a) weld (seam) grinding b) calibration c) straightening Csdpfx Ahjxmiirsxogt d) cutting The finished product—"raw tube"—is subject to further processing to obtain the required surface finish. There are two methods for surface treatment: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube mill is equipped with automated TIG welding from SAF: a) 2 pcs Tricathode NERTAMATIC 300 TR TIG inverters b) 1 pc Tricathode NETRINOX TH 500 TIG inverter c) Welding of products with wall thickness 0.5 - 1.5 mm – torch E16 d) Welding of products with wall thickness 1.5 - 3.5 mm – torch E25 e) RETRISAF cooling system 1.1 Steel strip decoiler for supporting and unwinding coils 1.2 Forming stations: a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – three-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – for cutting the product to required lengths Additional line equipment: 1.8 Four-station tube grinder Bossi Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Two-station tube polisher Bossi Type: CP 400-2U

Stanje: dober (rabljeno), Steklena nit-nikel žica, kabelska žica -Tip: 1,5 mm² -Žila: 1 -Dolžina: 100 m Cgjdpfx Aheb A Svmjxst -Teža: 2 kg

Leto izdelave: 2021, stanje: rabljeno, We are selling our chemical nickel working tank. The tank is made of acid-resistant stainless steel and is electropolished on the inside. Equipped with a Sager and Mack pump and filter. Codpfx Aoqzgb Sshxogt Includes a Munk Protektostat, frequency converter for the pump, and a heater with control unit and timer. Heating time from 10–93°C is approx. 1 hour 30 minutes. Internal dimensions: L1200 x W600 x H950 mm. The fill height is 880 mm, corresponding to a volume of approx. 635 litres. Installation dimensions: L2100 x W900 mm. Total connected load: approx. 50A. Upon request, we can also offer a customised solution for you.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 400 kW (543,85 KM), Obrat za oplemenjevanje rudnin za nikelj, baker, cink, grafit, zlato, srebro, kromit, kremen/solno kislino V današnji konkurenčni rudarski in metalurški industriji je maksimiranje vrednosti rude ključnega pomena. Naš sodoben obrat za oplemenjevanje rudnin ponuja celovito rešitev, zasnovano za povečanje vsebnosti in kakovosti surove rude, ki jo pretvori v tržen izdelek, pripravljen za nadaljnjo predelavo ali neposredno prodajo. Zasnovan za širok spekter mineralov, vključno z nikljem, bakrom, cinkom, grafitom, zlatom, srebrom, kromom in kremenom/solno kislino, naš obrat zagotavlja vrhunsko zmogljivost, učinkovitost in zanesljivost. Csdpfxjq Nw Uqo Ahxegt Uvod Rudarska podjetja po vsem svetu se soočajo z izzivom predelave rud, ki imajo pogosto nizke vsebnosti kovin in zahtevajo obsežno oplemenitenje, da so ekonomsko upravičene. Oplemenjevanje – proces povečanja koncentracije uporabnih mineralov – ima ključno vlogo pri zniževanju obratovalnih stroškov, povečanju izplena in posledično zagotovilu dobičkonosnosti. Naš obrat za oplemenjevanje rudnin, poznan tudi kot obrat za predelavo rude ali obrat za pripravo rude, integrira napredno tehnologijo in robustno inženirstvo, ki zagotavljata učinkovite procese drobljenja, mletja, razvrščanja in ločevanja. Naš obrat je zasnovan za obdelavo različnih vrst rud in predstavlja idealno rešitev za rudarska podjetja, ki želijo optimizirati svoje procese pridobivanja in predelave. Ne glede na to, ali predelujete nikelj, baker, cink, grafit, zlato, srebro, krom ali kremen/solno kislino, naš sistem ponuja potrebno prilagodljivost in zmogljivost za doseganje najzahtevnejših industrijskih standardov. ## Kaj je obrat za oplemenjevanje rudnin? Obrat za oplemenjevanje rudnin je industrijski obrat, kjer se surova ruda predela z namenom izboljšanja kakovosti in povečanja koncentracije uporabnih mineralov. Proces običajno vključuje več tehnoloških faz: 1. Drobljenje: Surova ruda se zmanjša na manjše delce za učinkovitejšo nadaljnjo predelavo. 2. Mletje: Nadaljnje zmanjšanje velikosti delcev za sprostitev uporabnih mineralov iz jalovine. 3. Razvrščanje: Ločevanje rude v različne frakcije glede na velikost z uporabo sito ali hidrociklonov. 4. Ločevanje: Uporaba različnih fizikalnih procesov, kot so magnetna separacija, flotacija ali gravitacijsko ločevanje za koncentriranje uporabnih mineralov. 5. Odtavanje (dewatering): Odstranitev odvečne vode za pripravo koncentrata na nadaljnjo predelavo ali transport. Ta integriran proces poveča vsebnost kovin in hkrati zmanjšuje količino odpadkov, kar pomeni večjo stroškovno učinkovitost in okoljsko trajnost.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, Höfer veneer saw including jointing milling unit Cutting and milling length: 3550 mm Cedpfewq D Tpsx Ahxjgt Cutting height: 45 mm Saw motor power: 2.2 kW Milling motor power: 1.1 kW Extraction duct Workpiece clamping via handwheel Year of manufacture: 1978 Price: 2,800.-

Stanje: pripravljen za uporabo (rabljen), KUKA 1FK6081-6AF71-1ZZ9-Z S47 servomotor SN:YFS350297765001, strokovno popolnoma obnovljen in testiran s 12-mesečno garancijo, 100 % delujoč, dobava v skladu s fotografijami. Za ta artikel dogovorjeni prodajni popusti ne veljajo. Za ceno povprašajte posebej! Cgodpforbw Umox Ahxst

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 235 mm, izvrtina vretena: 52 mm, premer struženja: 400 mm, višina središča: 200 mm, stružna dolžina: 1.000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with infinitely variable speed control in the PREMIUM CU series offer a wide range of features and accessories for customers from various industries. The PREMIUM CU series allows precise adjustment of cutting speed to material and turning diameter – especially beneficial for non-ferrous metals, plastics, and to achieve perfect surfaces on precision components and fits. Of particular note are the right/left control units attached to the tool slide, allowing easy switching between clockwise and counterclockwise spindle rotation. These replace the conventional change gears typically found on universal lathes. Efficient handling is provided by electromechanical spindle brakes for ultra-fast spindle stops. The leadscrews are equipped with overload protection. Performance data and specifications: - Distance between centers: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Swing over carriage: 235 mm - Swing without gap bridge: 550 mm - Bed width: 320 mm - Cross slide travel: 235 mm - Top slide travel: 110 mm - Max. turning tool size: 25x25 mm - Chuck adaptation: DIN 55027 No. 6 - Spindle taper (main spindle): MK 6 mm - Spindle bore: 52 mm Speed ranges: 1st range, stepless: 18 – 98 rpm 2nd range, stepless: 48 – 265 rpm 3rd range, stepless: 3: 144 – 790 / 4: 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitches (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill travel: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Overall length: 2350 mm Overall height: 1330 mm Weight: 1590 kg Standard equipment: - RÖHM three-jaw chuck - 5-piece quick-change tool holder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Base frame / chip tray / splash wall - Tool kit / operating manual / CE PREMIUM CU Series standards: - Heavy-duty grey cast iron machine bed for excellent vibration damping - Removable gap bridge - Prism guides - Hardened and precision-ground spindle, high concentricity, adjustable precision bearings - Smooth-running spindle and feed gear with oil bath - Hardened and precision-ground gears made of chromium-nickel steel - Feed reverse mechanism - Covered trapezoidal-thread leadscrew, hardened and precision-ground - Tool slide with locknut - Precision-adjustable slideways - Robust tailstock with offset taper - Lathe accuracy according to DIN standards Including 3-axis digital position display Cgjdpoy Hlxfsfx Ahxst The machine is available immediately in our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, This is a 150 LITRE cooking kettle from the premium manufacturer MKN, model Optima 850. The unit is in good used condition, free from defects, following a comprehensive inspection. You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on electrical components, limited to the replacement of defective parts (excludes labor for installation/removal) • High-quality branded appliances at fair prices • Professional refurbishment/inspection & expert cleaning • Tested & fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • DGUV V3 electrical safety inspection Technical Data: Width x Depth x Height: approx. 1000 x 850 x 700 mm Internal kettle: diameter 665 mm, depth 500 mm Power supply: Voltage: 400V / Power: 26 kW Serial number: 15213196 Model: 2022805C Gross volume: 163 litres Usable volume: 150 litres Condition: Used, major inspection completed, fully functional Additional features: • Inner kettle made entirely of highly corrosion-resistant chrome-nickel steel (1.4404) • Double-jacket kettle with separate, integrated, and maintenance-free steam generator system VAPRO for rapid heat-up, low energy and water consumption, and high efficiency • Short boiling times via quick steam system VAPRO • Standard equipment with 3 cooking stages (gentle simmer, medium boil, vigorous boil) • Automatic operational water monitoring and refill, ensuring constant readiness • Equipped as standard with double-walled folding lid and mixing tap • Drainage via front-mounted safety drain valve Cgjdpfx Ahoycq D Roxot • Standard interface for connection to an energy optimization system as per DIN 18875 and volt-free contact Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Specifications subject to change and errors excepted. Do you have questions, need advice, or wish to view an item on site? You can reach us by phone during our business hours: Monday-Friday 09:00–13:00 and 14:00–17:00. Sales are conducted exclusively in accordance with our general terms and conditions (GTCs).

Leto izdelave: 2011, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, This is a 115-LITER electric bratt pan, MAGNUM 3/1 GN, from the premium manufacturer MKN, model Optima 850. The bratt pan is a multifunctional appliance designed for steaming, boiling, simmering, braising, and frying. It features a front-mounted safety drain valve for easy emptying. The unit has been inspected in our in-house workshop and is fully operational. The bratt pan has been fully refurbished and is in excellent condition. The price stated is net, plus 19% VAT. Our used equipment service for you: • 6-month warranty on all electrical components • High-quality branded equipment at fair prices • Professional refurbishment / inspection & thorough cleaning • Tested & fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after your purchase • Provision of operating manuals, wiring diagrams & spare parts • DGUV V3 safety inspection completed Technical Data: • Dimensions (W x D x H): approx. 1300 x 850 x 850 mm • Inner kettle (W x D x H): 700 x 540 x 250 mm • Power supply: V: 400 / kW: 19.2 • Serial number: 11203758 • Model: 2022705 • Year of manufacture: 2011 • Nominal capacity: 115 liters Condition: Used, fully operational Cgsdpfsu S H D Nex Ahxst Further Details: • Multifunctional cooking appliance for steaming, boiling, simmering, braising, and frying • Bratt pan completely made from highly corrosion-resistant stainless steel (chromium-nickel alloy) • Frying base made from special sandwich material (MKN PowerBlock), smoothly ground • Heating via SUPRA contact heating elements for optimum heat distribution and fast heat-up times • Bratt pan with raised edge, tightly welded • High heat capacity ensures even heat transfer and minimal temperature fluctuation when loading with cold food • Standard features include electronic "Eco Control" regulation • Supplied as standard with double-walled hinged lid and mixer tap • Drain via safety valve at the front Shipping: • Delivery or self-collection by arrangement • Worldwide shipping available on request • Shipping to islands or mountain stations only by prior arrangement Do you have any questions, need advice, or would like to inspect the item onsite? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject to our General Terms and Conditions (GTC) only.

Stanje: novo, Leto izdelave: 2025, NOV STROJ Oprema: 2 x nikljani zračni mizi 1000 x 1000 2 x HSS rezili OPTIKNIFE naprava za menjavo rezil Set orodja 18,5 '' barvni zaslonski zaslon na dotik Tehnični podatki: Širina reza 1.370 mm Globina vstavljanja 1.450 mm Največja delovna višina 165 mm Cgodpfx Ahoxazbtexet Tlačna varnost 30 daN Minimalni pritisk 150 daN Maksimalni pritisk 5.500 daN Povratna hitrost vozička (0 - ...) 300 mm/s Hitrost rezila 45 ciklov/min Ostankovni rez, samodejno, brez pokrivnega lista 25 mm Ostankovni rez, samodejno, s pokrivnim listom

Stanje: rabljeno, Leto izdelave: 2022, proizvajalec krmilnikov: Siemens, model krmilnika: SINUMERIK ONE NCU 1750, Description: General: System: Industrial DED system Safety: Vacuum airlock and shielding gas purification Year of manufacture: 2022 Weight: approx. 7,500 kg Geometry: Number of axes: 5-axis kinematics with automatic tool changer Travel paths (x/y/z): 650×400×400 mm Cgedpfx Ahjyy Hgkexet Table diameter: 400 mm Maximum table load: 100 kg Measurement: Renishaw touch probe Laser & Optics: Laser: Dual IPG laser Fine processing: 500 W (IPG fiber laser, 200 µm fiber) High build rate: 2000 W (2 kW) (IPG fiber laser, 600 µm fiber) Optics: Precitec YW 30 optics with VX10/VX24 nozzles for standard and micro cladding Control unit: CNC: SINUMERIK ONE NCU 1750 (SW 6.14) on 24" SIMATIC touch panel Process preparation: Via Siemens NX CAM and edge computing (IPC 427e) Monitoring: Live process control via HMI Display Manager and sensors for the chamber atmosphere Electrical specifications: Total power: 62 kW Current: 110 A Voltage: 3×400 V / 50 Hz (control circuit) Material handling: Material: Two Medicoat powder feeders for titanium (Ti64), nickel-base, steel and hard materials

Leto izdelave: 2019, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rabljena linija za dekorativno galvanizacijo NIKELJ KROM Linija je sestavljena iz 19 rezervoarjev dimenzij 3 m x 1,2 m x 1,4 m (4,5 tone) 1 sušilnik z 2 motorjema 2 transformatorja 12V–15V, 1200A 1 transformator 12V–15V, 4000A 1 oljni transformator 2 črpalki z napetostjo 400V (trifazni) in močjo 1,5 kW K galvanizacijski liniji je priložena tudi naprava za proizvodnjo DEMI vode. Cgjdpfoy Hcmtox Ahxot Po potrebi lahko ponudimo tudi linijo za čiščenje (obdelavo) vode.

Leto izdelave: 2007, obratovalne ure: 138 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 900K707385, Tablet Press PRESSIMA – as new, in delivery condition Fully functional machine with complete documentation and software. Includes a multi-tip tool set EU-D (5 × 4mm) (original price €12,000, 6 months old) as well as a single-tip tool set (5mm) EU-B. Both punch sets supplied by Ritter. The machine features an interchangeable turret. B or D tooling can be used, each in EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital display on the machine panel • Digital readout of parameters set via handwheels • Note: no automatic control available Technical Data • Speed: 10–75 rpm • Main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Feed shoe: two-wheel, speed adjustable • Drive motor: frequency-controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and pressing area: stainless steel • Pressing area paint-free, easy access, surfaces hard nickel-plated • Central dust extraction via connection port • Central lubrication of punches via manual lubrication pump • Automatic lubrication pump for punches and guideways • Shoe motor integrated in head section Mechanics • Handwheels for tablet thickness, main compression, pre-compression, and fill quantity • Rotary flap between fill tube and feed shoe • Robust pre- and main compression stations • Scrapers on upper and lower punches • Retaining magnets on lower punches • 12 mm feed cam standard • Lower punch is lowered after dosing • Lower guideway and ejection cam easily removable • Machine status display on control panel Measurement and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/evaluation of: o Main compression top o Main compression bottom o Pre-compression top o Ejection force o Scraping force o Punch travel (upper and lower) • Signal amplifiers for main compression, pre-compression, ejection, and scraping force available Equipment / Positions • Upper and lower punch shaft bores with feather keyways 4.8 mm for guided tooling • Compartment feed shoe • Hard-chromed turret plate • Main compression force measurement incl. display at the operator terminal • Accessory kit type 8 MX: o 4 blank dies EU-B o 4 blank dies EU-D o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional Cgjdpoy Hl Aqsfx Ahxjt • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Stanje: dober (rabljeno), Ideal 7260 Hidravlična papirna giljotina Stroj je v zelo dobrem stanju, pripravljen za proizvodnjo. Ta profesionalni rezalni stroj je zasnovan za visoko zmogljivo rezanje. Ta model ponuja odlično razmerje med kakovostjo in ceno. Giljotina ima dolžino noža 721 mm in je opremljena z infrardečo varnostno zaveso, hidravličnim pritiskalcem ter elektromehanskim pogonom noža. Standardna oprema vključuje tudi programabilno programiranje z do 99 koraki, elektronsko odčitavanje pozicije vozička z natančnostjo 1/10 mm in samodiagnostični sistem z izpisom napak na zaslonu. Glavna delovna miza stroja je izdelana iz nerjavečega jekla in ima vgrajen prezračevalnik (blower). Za lažjo uporabo je na voljo izmet papirja. Tehnični podatki: Dolžina reza: 721 mm Višina vstopa: 80 mm Globina vstopa: 720 mm Globina prednje mize: 530 mm Minimalen ostanek: 20 mm Minimalen ostanek z varnostnim nosilcem: 90 mm Napajanje: 400 V / 50 Hz 1,5 kW Teža: 588 kg Dimenzije: 1335 x 1305 x 1540 mm Ključne lastnosti: - Elektromehanski pogon noža - Hidravlični pritiskalec Csdpfxsy Ah Ius Ahxjgt - Popolnoma nastavljiva sila rezanja (250–2000 kg) - Optični indikator rezne linije (laser) - Prezračevalna miza (na sprednji in zadnji mizi) - Pedalo za predhodno označevanje reza - Sprednja miza iz krom-nikljevega jekla - Rezalni nož iz visoko kakovostnega HSS jekla Varnostne funkcije: - Varnostne zavese – foto celice - Prozoren varnostni pokrov na zadnji mizi - Varni pogon – IDEAL patent - Dvoročni elektronski zagon reza - Avtomatska vrnitev noža iz kateregakoli položaja - Glavno stikalo z možnostjo zaklepanja - Menjava noža mogoča z vedno pokritim rezilom

Stanje: novo, Leto izdelave: 2026, Nastavitev kota rezanja horizontalno 15°- 90°15° brezstopenjsko, moč motorja žage 5,50 kW (400 voltov), premer žaginega lista 600 mm, delovno območje zadnji prislon 180 mm, delovna višina nastavljiva prek nog 940 do 1000 mm, 2 x odsesovalna nastavka (zgoraj v pokrovu in spodaj), neto teža 600 kg, dimenzije ŠxDxV 135x140x150 cm, RAL 9007 sivo aluminijasta, obračalna plošča iz brušenega nikljevega jekla, glava žage z vodili z krožnimi kroglicami za visoko natančnost, dolgo življenjsko dobo in visoko togost. Obratovalni material se lahko pri odprtem pokrovu prednapne z nizkim tlakom. Hidropnevmatski pomik lista, odvajanje ostružkov v smeri odsesovalnega pokrova. Csdpfx Ahefv T Ansxjgt Veselimo se vašega sporočila! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, pritisk: 8 letvica, Bevel angle adjustment horizontal 15°-90°-15°, infinitely variable Saw motor: 5.50 kW (400 Volt) Saw blade: 600 mm Travel range - rear stop: 180 mm Working height: adjustable from 940 to 1000 mm via feet 2 x extraction nozzles (top on the hood & bottom) Net weight: 600 kg Dimensions (W x D x H): 135 x 140 x 150 cm RAL 9007 Grey Aluminum Rotary plate of precision-ground nickel steel Saw head guided by ball recirculation linear guides, offering high accuracy, long service life, and high rigidity. Workpiece clamping under low pressure possible when the hood is open. Hydropneumatic blade feed Chip flow directed to extraction hood. Equipment: • Precision under-table circular saw • Bevel adjustment: 0º/ 45º/ 90º/ -45º / -60º, infinitely variable • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction device – chip extraction unit • Mist lubrication system for air-oil cooling Codpfx Aogwt S Tohxsgt • Air pistol with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures your workpieces are positioned precisely at the desired processing position on our UK 600 HA 90°. A gripper clamp holds the material; the NC controller automatically positions it. Then, clamping and sawing operations are initiated. All positions are pre-programmed into the control system. After the machine completes the operation, it automatically moves to the next cutting position. Depending on the workpiece, multiple parts can be clamped together side-by-side or stacked and positioned simultaneously. You are welcome to inspect the machine at any time in our production/demonstration hall. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: rabljeno, Arcam EBM Spectra H 3D tiskalnik Visokotemperaturna zmogljivost (nad 1.000 °C) omogoča uporabnikom vključevanje novih zlitin v proizvodnjo za razširitev svoje ponudbe, vključno z materiali za visoke temperature, ki so nagnjeni k pokanju. Delovni volumen Ø250 x 430 mm višina. Moč elektronskega žarka 6 kW. Tipična gradbena atmosfera 4 x 10-3 mbar (delni tlak He). Ponujeni materiali vključujejo: TiAl, nikeljeva zlitina 718, visoko legirano orodno jeklo, Ti6Al4V razred 5 in več. Z mobilno postajo z lijakom in nalagalno postajo. Skupne mere D1.328 x Š2.344 x V2.858 mm. Teža 2.915 kg. Cedpfx Asy Dr S Tohxegt

Leto izdelave: 2009, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 unit liquid ring vacuum pump. Please read the description carefully all the way to the end!! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Attention!! The pump does not have explosion protection certificates. It is also not possible to replace the motor, as it uses a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chrome-nickel steels are no longer sufficiently corrosion-resistant. Particularly when chloride-induced pitting and crevice corrosion, as well as stress corrosion cracking, are a concern. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Alloy 2.4605 is mainly used in the chemical industry, pulp and paper industry, as well as in flue gas desulphurization units. Outstanding resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, and especially to sulfuric/hydrochloric acid mixtures. Typical applications include: - Plant components for processes in organic chemistry with chloride-containing media, especially where chloride-based catalysts are used - Multipurpose plants in the chemical industry - Plant components in the fine chemicals and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuelled power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brines - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulfuric acid coolers - Piping in geothermal power plants - Components in flue gas desulphurization units Manufacturer: Busch Model: LC 0220 A ZZO XX ZZ Volumetric flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al Cgedpfoigqutex Ahxet All ball bearings new, mechanical seal refurbished by a specialist. Weight: 121 kg Dimensions: Length 960mm, Width 370mm, Height 370mm Connection: DN 50 (2")

Stanje: rabljeno, prevoženi kilometri: 32 km, moč: 125 kW (169,95 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 3.300 kg, prva registracija: 10/2024, emisijski razred: Euro 6, barva: siv, število sedežev: 8, skupna dolžina: 5.450 mm, skupna širina: 2.275 mm, skupna višina: 1.979 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, Internal number: 66468---- Errors and prior sale reserved! SPECIAL EQUIPMENT * Fixed trailer hitch * 2nd row windows: tilting windows in side panels * 3-zone automatic climate control – with auxiliary heater – with R-1234yf refrigerant – additional electric heater – electric temperature control in the rear passenger area * 70 l fuel tank * Heated steering wheel * Wheels: 7.5 J x 19 alloy wheels, Titanium design, Lustre Nickel finish, with 235/50 R19 111/109T tires * Rear Seat Package 14: Sliding doors on right and left – 2nd row with 3 individual seats – 3rd row with 1 individual seat and double bench seat * Seat Package 22: Front passenger seat electrically adjustable 5 ways – Driver’s seat electrically adjustable 5 ways – Seat heating for driver and front passenger – Inside and outside armrests – Lumbar support electrically adjustable for driver and front passenger – Front passenger airbag – Side airbags (right and left) – Front head-shoulder airbags (right and left) – Feeltek faux leather upholstery, Windsor Style in Black Onyx * Auxiliary heater (fuel-water heater) with remote control incl. H7 AGM dual battery * Technology Package 5: Exterior mirrors electrically adjustable, heated, and foldable – Audio system with 13-inch multifunction display, Ford SYNC 4 incl. navigation – Blind Spot Assist incl. CTA rear emergency braking assistant – Pre-Collision Assist, camera and radar-based – Driver fatigue alert – Wrong way warning – Lane keeping and lane departure assist – Traffic sign recognition system – Front and rear Park Pilot system – Adaptive cruise control with Stop&Go function – Intelligent speed limiter with speed limit display – Reversing camera FURTHER EQUIPMENT * 2 grab handles for driver and front passenger Cgodov N Spkspfx Ahxst * 2-stage unlocking for passenger and cargo compartment * ABS * Front storage compartment * Driver airbag * All-wheel drive * Exterior mirror housings in vehicle color * Battery: H7 AGM single battery * Roof console * Diesel particulate filter (DPF) with SCR catalyst and AdBlue tank * ESP with additional electronic brake force distribution * Power windows with quick up/down for driver and front passenger * Electronic parking brake * Ford Key Free system – incl. Ford Power start function * FordPass Connect – Wi-Fi hotspot, 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Lockable glove compartment * Interior lighting in passenger area * Front interior lighting * 55 l fuel tank * LED headlights – LED high beam – LED low beam – LED daytime running lights incl. integrated front LED indicators – Static cornering lights – High beam assist * Cargo area lighting (LED) * Small center console * eCall emergency call assistant * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5 J x 17 alloy wheels, premium finish in Carbonized Gray with 215/60 R17C 109/107T tires * Gear lever on steering column * Rain-sensing wipers * Sliding door on right side * Track-based flexible seating system * Fixed side windows, 2nd and 3rd row * Sunblinds for sliding door windows * Start-stop system * Socket: 12-volt outlet in passenger area * Carpeted floor throughout vehicle * USB port for 2nd row * Recirculating air heater * 4 lashing eyes * Immobilizer * Tinted heat-insulated glazing, medium tint * Central locking with remote control, additionally with 2nd key with remote control ...and much more----1st owner. German specification.

Stanje: kot nova (razstavni stroj), 1 universalni rezkalni glavi, neuporabljeni, namenjeni naknadni vgradnji na konvencionalne, NC ali CNC rezkalne stroje ali vrtalne stroje katerekoli vrste, sistem "HURON", z dvoosnim nagibanjem, vsak kot nastavljiv. Priključek: ISO 40 Iztek: pribl. 360 mm Nazivna pogonska moč: 10 KM Najv. hitrost: 1800 vrt/min Teža: pribl. 82 kg Cgjdpfx Aodbny Eshxjt Dodatki / Posebnosti: • Ročno vpenjanje orodja • Glavno vreteno ter vsi menjalniki in osi so izdelani iz cementiranega in poboljšano krom-nikljevega jekla • 2 medsebojno vrtljivi osi omogočata nastavitev vsakega kota – sistem "HURON" • Stožčasti zobniki brušeni po "KLINGELNBERG" sistemu • Ležaji glavnega vretena so visokonatančni stožčasti valjčni ležaji • 1 privijač orodja • Navodila za uporabo Dobavni rok: takoj, pridržana možnost predhodne prodaje Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, CONSTMACH čeljustni drobilci so zasnovani za zagotavljanje visoke vzdržljivosti in vrhunske zmogljivosti drobljenja, zaradi česar so idealni stroji za primarno drobljenje v kamnolomih in rudnikih. Zmožni so obdelave širokega spektra materialov – od najmehkejšega apnenca do najtrših vrst granita in bazalta. Njihova robustna konstrukcija, visok navor vztrajnika ter posebna geometrija čeljusti omogočajo učinkovito drobljenje materiala v enakomerne velikosti. Napreden hidravlični mehanizem nastavitve omogoča enostavno prilagajanje želene izhodne frakcije in minimalno potrebo po posredovanju operaterja. CONSTMACH čeljustni drobilci zagotavljajo dolgo življenjsko dobo s kovanim krom-nikljevim ojnim drogom, težko obremenjenimi ležaji in avtomatskim mazalnim sistemom. Varjen okvir ohišja, ki je termično razbremenjen, ohranja maksimalno vzdržljivost tudi pri visokih vibracijah. Uporabniku prijazna zasnova vzdrževanja zagotavlja neprekinjeno in varno delovno okolje med proizvodnjo. Ti drobilci se lahko vgradijo v stacionarne ali mobilne drobilne postroje in tako nudijo visoko prilagodljivost za raznolike projekte. CJC-60 Tehnične specifikacije Dimenzija odprtine: 600 x 380 mm Moč motorja: 30 kW Hitrost gredi: 330 o/min Teža: 6.000 kg Min./Maks. nastavitev: 30 - 100 mm Zmogljivost: 60 - 110 t/h CJC-90 Tehnične specifikacije Dimenzija odprtine: 900 x 650 mm Moč motorja: 75 kW Hitrost gredi: 277 o/min Teža: 11.400 kg Min./Maks. nastavitev: 50 - 150 mm Zmogljivost: 90 - 270 t/h CJC-110 Tehnične specifikacije Dimenzija odprtine: 1.100 x 850 mm Moč motorja: 132 kW Hitrost gredi: 230 o/min Teža: 33.000 kg Min./Maks. nastavitev: 60 - 200 mm Zmogljivost: 150 - 420 t/h CJC-130 Tehnične specifikacije Odprtina čeljusti: 1.300 x 1.000 mm Moč motorja: 160 kW Hitrost gredi: 220 o/min Teža: 42.500 kg Min./Maks. nastavitev: 100 - 280 mm Zmogljivost: 275 - 790 t/h CJC-140 Tehnične specifikacije Dimenzija čeljusti: 1.400 x 1.100 mm Moč motorja: 200 kW Hitrost gredi: 220 o/min Teža: 52.000 kg Min./Maks. nastavitev: 120 - 280 mm Zmogljivost: 420 - 850 t/h Zakaj izbrati CONSTMACH čeljustne drobilce CONSTMACH je sinonim za kakovost in zanesljivost na področju tehnologij drobljenja in presejanja. Vsak model čeljustnega drobilca je izdelan v skladu z mednarodnimi standardi, kar zagotavlja najvišjo zmogljivost, nizke obratovalne stroške in dolgo življenjsko dobo. Po meri prilagodljive rešitve in široka servisna mreža podpirajo neprekinjeno proizvodnjo vašega podjetja. Glede zanesljivosti, inženirske kakovosti ter poprodajne tehnične podpore je CONSTMACH prava izbira za drobilne sisteme. Cedpjxqgt Asfx Ahxogt Dejavnost podjetja Constmach Constmach je vodilni proizvajalec strojev, ki industriji gradbeništva in rudarstva ponuja obsežen portfelj izdelkov. Naš asortiment obsega stroje za izdelavo betonskih blokov, stacionarne in mobilne betonske baze, drobilce kamna, postrojenja za drobljenje in presejanje, pralnike peska, stroje za pridobivanje peska, asfaltne baze, transportne trakove, čeljustne drobilce in mobilne drobilne postroje. Zaradi visokih standardov kakovosti, inovativnega pristopa h proizvodnji in osredotočenosti na potrebe kupca je Constmach prepoznaven kot zanesljiva blagovna znamka na domačem in tujem trgu. Naši izdelki so prva izbira strokovnjakov v industriji zaradi vzdržljivosti, učinkovitosti in dolgotrajnega delovanja.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 200 kW (271,92 KM), barva: drugo, Leto izdelave: 2026, Oprema: ABS, Čeljustni drobilniki CONSTMACH so zasnovani za visoko vzdržljivost in vrhunsko zmogljivost drobljenja, zaradi česar so idealni stroji za primarne postopke drobljenja v kamnolomih in rudnikih. Zmožni so obdelovati širok spekter materialov, od najmehkejšega apnenca do najtrših vrst granita in bazalta. Njihova robustna konstrukcija, visok navor vztrajnika in posebna geometrija čeljusti zagotavljajo učinkovito drobljenje materiala na enakomerne dimenzije. Napreden hidravlični mehanizem za nastavitev omogoča enostavno prilagoditev želene izhodne velikosti in zmanjšuje potrebo po posegih operaterja. Čeljustni drobilniki CONSTMACH zagotavljajo dolgo življenjsko dobo z izjemno trdno konstrukcijo roke iz krom-nikljevega jekla, robustnimi ležaji in samodejnimi sistemi za mazanje. Privarjen glavni okvir, ki je bil termično tretiran za zmanjšanje napetosti, ohranja maksimalno vzdržljivost tudi ob močnem tresenju. Uporabniku prijazna zasnova za vzdrževanje omogoča neprekinjeno in varno delovno okolje med proizvodnimi postopki. Te stroje je mogoče vključiti v stacionarne ali mobilne drobilnice, kar omogoča visoko prilagodljivost projektom. Tehnične specifikacije CJC-140 Velikost čeljusti: 1.400 x 1.100 mm Moč motorja: 200 kW Hitrost gredi: 220 min⁻¹ (rpm) Teža: 52.000 kg Cedpfxoxqf Rye Ahxegt Min./maks. nastavitev: 120 - 280 mm Zmogljivost: 420 - 850 t/h Zakaj izbrati čeljustne drobilnike CONSTMACH? CONSTMACH je sinonim za kakovost in zanesljivost v tehnologijah drobljenja in sejalnih naprav. Vsak model čeljustnega drobilnika je izdelan skladno z mednarodnimi standardi, s čimer so zagotovljeni največja zmogljivost, nizki obratovalni stroški in dolga življenjska doba. S prilagodljivimi možnostmi zasnove glede na potrebe strank in obsežno servisno mrežo podpiramo vaše cilje neprekinjene proizvodnje. Kar zadeva zanesljivost, inženirsko kakovost in poprodajno tehnično podporo je CONSTMACH prava izbira za drobilne sisteme. Kaj počnemo pri Constmachu? Constmach je vodilni proizvajalec strojev, ki deluje na področjih gradbeništva in rudarstva s široko paleto izdelkov. Naša ponudba vključuje stroje za izdelavo betonskih zidakov, stacionarne in mobilne betonske centrale, stroje za drobljenje kamna, postrojenja za drobljenje in presejanje, stroje za pranje peska, naprave za izdelavo peska, asfalterske centrale, tračne transporterje, čeljustne drobilnike ter mobilne drobilnice. Zaradi visokih standardov kakovosti, inovativnega proizvodnega pristopa in rešitev, usmerjenih v stranko, je Constmach prepoznan kot zanesljiva blagovna znamka na domačem in tujih trgih. Naši izdelki so priljubljena izbira strokovnjakov iz industrije zaradi vzdržljivosti, učinkovitosti in dolge življenjske dobe.