Mwm/Piller Nktb 4-1158 nakup rabljenega (59.580)

Leto izdelave: 1972, stanje: dober (rabljeno), Power generator, emergency power generator, generator, unit, power generator, emergency generator, power generating set -Manufacturer: PILLER/MWM -Power output: 730 kVA 50 Hz Nlsdpfxjivql Io Agxsa -Engine: MWM type TbRHS 518V16, output 850 HP, speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without control system -Individual components: see photos -Transport dimensions: 6 loading metres -Total weight: 8600 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, izhodna napetost: 10.000 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna (navidezna) moč: 6.750 kVA, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Deutz MWM, 5 kosov električnih agregatov (elektrarna) s skupno močjo 6750 kVA, leta 2017 generalno obnovljeni z novo krmilno enoto in nadrejenim upravljanjem. Agregat je bil do leta 2025 namenjen za rezervno napajanje velikega podatkovnega centra, redno vzdrževan in posodobljen, nahaja se v odličnem stanju. Motor: Deutz MWM TBD604 BV12, 200 delovnih ur, letnik 1994, Generator: Siemens 1FC7 567, 10.000 V, 50 Hz, 78 A, 1350 kVA, Nsdpfxeyzb R Te Agxjla Krmiljenje agregata: DEIF, Genset control, nova različica leto 2016/17, Nadrejeno vodenje: DEIF, upravljanje obremenitve, sinhronizacija, upravljanje goriva, itd. leto 2017, Odklopnik moči 10 kV: Siemens Dušilci zvoka, povratni hladilnik, črpalke itd.

Stanje: dober (rabljeno), Leto izdelave: 1980, Diesel emergency generator Manufacturer: MWM Mercedes - AEG, year of manufacture 1980, complete with control cabinet and radiator. Diesel engine: MWM, 8-cylinder, 405 HP Nledpfx Agst In Nyexoa Generator: AEG, type SIRI 100 D/4, 330 kVA.

Stanje: kot nova (razstavni stroj), Piller Apotrans II 200A 4-pole. Load transfer switch. Nledpfoigl N Eex Agxja

Stanje: rabljeno, High-pressure radial fan, dust extraction blower, exhaust extraction, welding fume extraction, extraction system, fan, pressure blower, vacuum blower - Motor power: 0.37 kW - Performance data: not available. - Inlet connection: Ø 65 mm Nlsdpfxjchaygj Agxoa - Outlet connection: Ø 60 mm - Dimensions: 510/480/H470 mm - Weight: 49 kg

Stanje: pripravljen za uporabo (rabljen), MWM GFF-N-60 A/A 69.50.060.01 DC motor 24Vdc, serial number 514, used, in good condition, fully functional, scope of delivery as shown in photos. Nodpfoww Ru Hex Agxsla

Stanje: novo, Leto izdelave: 2025, VFFS machine with integrated free-fall metal detector for inspecting vertically falling products, equipped with a 14-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photosensor (print mark detection) for seal/cut position; servo-driven sealing unit for end seals; servo motor for film draw-off; ribbon printer for batch number, date, and best before date (BBD). - Multihead weigher specifications: Number of weighing heads: 14; Weighing range (single discharge): 1~60g; Volume per head: 0.3L; Weighing accuracy: X(0.5); Discharge flap: single flap; Surface finish: smooth (optionally dimpled); Product contact parts: AISI 304 (optional upgrade to AISI 316 at extra cost). - Free-fall metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; pipe diameter: according to forming collar. Nledpsv Nnbcjfx Agxja - VFFS machine specifications: max. machine cycle rate (idle): 90 cycles/minute; bag size: L(40-250)xW(50-170)mm (double film draw-off possible for longer bags); suitable film width: 120-360mm; product contact parts: AISI 304 (optional AISI 316 at extra cost); power supply: 220V, 50/60Hz; required compressed air: 0.4-0.8MPa. Please note that our new prices are often below the usual prices for used machines. Feel free to contact us and let us know your packaging requirements. - Typically, 30-50 different new machines are always available from stock for immediate delivery. For custom-manufactured machines, we offer short lead times of approx. 3 weeks. - All machines are available with full warranty.

Leto izdelave: 2025, stanje: novo, VFFS machine with integrated gravity metal detector for inspecting vertically falling products, equipped with a 14-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset tooling required) OR pyramid-shaped bags (special sealing unit required). The vertical form-fill-seal machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film pull-off; thermal transfer printer for lot number, date, best-before date. Nlodjv Nnb Aopfx Agxsa - Multihead weigher specifications: Number of weighing heads: 14; weighing range (per single discharge): 10–1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge chute: single gate; surface finish: smooth (optionally dimpled); product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge). - Gravity metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to forming collar. - VFFS machine specifications: max. machine cycle rate (no load): 65 cycles/min; bag size: L(70–270)×W(70–270)mm (double film feed for longer bags possible); suitable film width: 160–560mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; required compressed air: 0.4–0.8MPa. Please note that our new equipment prices are often below typical used equipment prices. Just contact us and let us know your packaging requirements. – We generally have 30–50 different new machines available immediately from stock. For custom-built machines, we offer very short delivery times from about 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, VFFS machine with integrated gravity metal detector for inspecting free-falling products, equipped with a 14-head multihead weigher suitable for bulk materials and granulates. Compact design without platform frame. Suitable for the production of pillow bags with back seal, gusseted stand-up pouches (requires gusseting tool), OR pyramid-shaped bags (requires special sealing unit). The vertical packaging machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film feeding; thermal transfer printer for batch number, date, and best-before date. Nedpjv Nnbpefx Agxola - Multihead Weigher Specifications: Number of weighing heads: 14; Weighing range (single discharge): 2~200g; Volume per head: 0.5L; Weighing accuracy: X(0.5); Discharge gate: single flap; surface finish: smooth (optional dimpled); product-contact parts: AISI 304 (optionally AISI 316 at additional cost). - Gravity Metal Detector Specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; Pipe diameter: according to forming tube. - VFFS Machine Specifications: max. machine speed (no load): 85 cycles/min; Bag size: L(40-300)xW(60-220)mm, (double film draw-off possible for longer bags); suitable film width: 140-460mm; product-contact parts: AISI 304 (optionally AISI 316 at additional cost); power supply: 220V, 50/60Hz; required compressed air: 0.4-0.8MPa. Please note that our new prices are often lower than standard used equipment prices. Feel free to contact us and tell us about your packaging requirements. Typically, 30-50 different new machines are available from stock for immediate delivery. For customer-specific machines, we offer very short lead times from about 3 weeks. All machines come with a full warranty.

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 500 mm Table size: 2230 x 670 mm Table clamping area: 1340 x 400 mm Magnetic chuck size: 1000 x 410 mm Table load capacity: 450 kg Nlodpfxjx Afpae Agxsa Spindle head overhang: max. 330 mm Grinding spindle speed: 1440 rpm Total power requirement: 18.2 kW Machine weight approx.: 3.5 t (machine only) Machine dimensions (LxWxH): approx. 1.9 x 3.3 x 2.25 m Control cabinet dimensions (LxWxH): 1.0 x 0.4 x 1.4 m Precision surface grinding machine Possible surface grinding operations: - Cross grinding; plunge grinding; face grinding and straight surface grinding Further information: - Hydraulic, stepless table speed 1...30 or 2...30 m/min - Maximum table stroke 1150 mm - Cross feed by hand 0.01 mm - Vertical infeed of grinding wheel by hand 0.002 mm; smallest incremental infeed 0.001 mm - Automatic infeed 0.001...0.1 mm - Maximum selectable total infeed 5.0 mm - Coolant system (tank with pump) - Hydraulic unit - Control cabinet

Stanje: rabljeno, Technical details: Z-axis travel: 400 mm Speed range: up to 3,000 rpm, stepless Feed rate, stepless: not specified Quill stroke, vertical: 100 mm Spindle taper: MT2 (Morse Taper 2) Table surface: 445 x 315 mm Distance table to lower edge of spindle: max. 520 mm Table travel, longitudinal: 250 mm Table travel, cross: 330 mm Table height above floor: 920 mm Total power requirement: 1.6 kW Approx. machine weight: 1,500 kg Nljdpjv A S Efefx Agxsa Machine dimensions (LxWxH): 1.3 x 1.1 x 2.0 m Application: Milling and drilling of elongated holes. The drill spindle head is equipped with a precision dial gauge for depth indication. 5x T-slots according to DIN 650: a=10; h=18; b=18; c=8 mm Features: Two-axis digital readout, ACU-RITE

Stanje: rabljeno, Funkcionalnost: nepreverjeno, teža obdelovanca (maks.): 5.000 kg, CNC dvostebrni koordinatni vrtalni stroj Proizvajalec: Mikromat WMW Tip: CBKoZ 1400x2240/2 Krmiljenje: Siemens 840D (vgradnja cca 1997) Potrebni prostor: 7000 x 6500 x 5300 mm (DxŠxV) Teža: 22.500 kg Vključuje: - prikazane nosilce orodja - obsežno dokumentacijo Nodexyq Hxjpfx Agxela Dodatni podatki v prilogah. Stroj je mogoče na lokaciji preizkusiti pod napetostjo. Dostava: iz obstoječe lokacije, brez demontaže Kupec mora sam poskrbeti za demontažo in nakladanje stroja. Na voljo je 10 t mostno dvigalo, s katerim je bil stroj prvotno postavljen. Dodatna pomoč in uporaba viličarja sta po dogovoru možna. Vse informacije brez garancije. Vmesna prodaja pridržana. Predmet nakupa se prodaja z izključitvijo kakršnega koli jamstva. Izključitev ne velja za odškodninske zahtevke zaradi hude malomarnosti ali namerne kršitve obveznosti prodajalca ter za poškodbe življenja, telesa ali zdravja.

Stanje: rabljeno, Hydraulic power unit, hydraulic pump, hydraulic station, universal power unit - Manufacturer: MW Märkisches Werk, hydraulic power unit with reservoir - Type: 1324 - Shaft: 12 x 8 mm, see technical drawing in photo - Individual components: see photos - Dimensions: 280/270/H450 mm Nlodpfehv S Ezox Agxoa - Total weight: 9.8 kg

Stanje: skoraj kot novo (rabljeno), CNC vertikalna izvrtalno-rezkalna stroj WMW MIKROMAT Pomik X: 1120 mm Pomik Y: 710 mm Pomik vretena Z: 315 mm Pomik W: 630 mm Krmilni sistem: CNC NUM 1060 Vreteno: Ø 125 mm Stožec: SA40 Število vrtljajev: od 36 do 2240 min⁻¹ Dimenzije mize: 1400 x 900 mm Nlsdpegy E Dpsfx Agxja Razdalja med stebri: 1080 mm Maksimalna razdalja med čelom vretena in mizo: 0–900 mm Največja dovoljena obremenitev mize: 1000 kg Ločena elektro omara Stroj obnovljen leta 2000 s krmilnikom CN NUM1060 Napetost: 380 V Dimenzije (D x Š x V): 4000 x 2460 x 3030 mm Teža: pribl. 9 T

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS Nlodpfx Agox Hllxsxoa - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Njdjy Dg N Tjpfx Agxsla Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. Nsdpfed Tbbdex Agxola The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Nodpfxofdkb Ts Agxsla Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. Nlodpfxsd Tqalo Agxoa The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. Nlodofdkb Uspfx Agxoa When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Njdpjguk A Hofx Agxola Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Njdpsfdkbhefx Agxola - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Nljdpfx Asguk Dkogxoa - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times Njdpsguk Dvsfx Agxola - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.