Rehm Invertig 230 Gw nakup rabljenega (32)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 30 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 282974, trajanje garancije: 6 meseci, Rehm Tiger 230 AC/DC Ultra je visokokakovosten TIG varilni aparat, namenjen profesionalni uporabi. Proizvaja ga nemško podjetje Rehm in omogoča varjenje v načinih AC in DC, zato je odličen za varjenje jekla, nerjavečega jekla ter aluminija. Stroj je bil uporabljen le 30 ur, je v odličnem delovnem stanju, redno vzdrževan in preizkušan. Zagotavljamo 6-mesečno garancijo. Pripravljen je za takojšnjo uporabo v industrijskih ali delavniških okoljih. ⚙️ Tehnične specifikacije* Model: Tiger 230 AC/DC Ultra Varilni tok: pribl. 5 – 230 A Napajanje: 3~ 400 V, 50/60 Hz Načini delovanja: AC za aluminij in mehke kovine, DC za jeklo in nerjaveče jeklo Postopki: TIG Lift-Arc, pulzni TIG, MMA/ročni obločni postopek (če je vključena opcija) Delovni cikel: npr. 230 A (eta) 40 % (preverite dejansko konfiguracijo) Upravljanje: digitalni vmesnik s pomnilniškimi programi in preglednim zaslonom Hlajenje: zračno hlajen / opcijsko vodno hlajen (odvisno od izvedbe) Teža: pribl. 7,9 kg ✅ Ključne prednosti Odlična vsestranskost — AC/DC omogoča uporabo na različnih materialih. Digitalno upravljanje in pomnilniški programi olajšajo nastavitev in ponavljajoča dela. Visoka kakovost izdelave in zanesljivost znamke Rehm. Pjdpfoxuvb Dsx Agperd Primeren za delavnice, proizvodnjo, popravila ter serijsko uporabo. Rabljena naprava v odličnem stanju — odlična izbira glede na stroškovno učinkovitost. 🎯 Področja uporabe Proizvodnja iz aluminija Konstrukcije iz nerjavečega jekla in jekla Natančno TIG varjenje v industriji, letalstvu ali avtomobilski industriji Servisna in vzdrževalna dela

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Psdpfx Ajxddamegperd Weight: approx. 28kg On-site inspection is possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 127814, vrsta zaščite (IP koda): IP23, Oprema: Na voljo je tipska ploščica, The machine on offer is a used Rehm Invertig 260 AC/DC. The machine is in excellent technical condition and fully operational. Visually, there are signs of previous use. All switches and the digital display are functional, and the machine welds flawlessly. The Invertig 260 AC/DC is stored in our warehouse and ready for welding. Test welding is possible at any time; however, we recommend scheduling an appointment in advance. The Invertig 260 AC/DC allows you to perform both TIG welding and electrode (MMA) welding. The machine combines professional welding performance with intuitive operation. Individual welding parameters can be set via the digital display. The machine is already configured in three languages (German, English, and French). The Rehm Invertig 260 AC/DC offers a welding current range of 5–260 A with a high duty cycle. Please refer to the machine’s nameplate for the specific welding current ranges and duty cycles for TIG and electrode welding. Pedpfx Aov H Afwsgperd Optimal seam formation is ensured by adjustable up-slope/down-slope times, pre-gas and post-gas flow times, as well as start and crater current. Narrower bead profile thanks to DC pulsing up to 500 Hz. The digital display automatically stores the last device settings. Included in the scope of delivery is a used water-cooled 8 m TIG torch, model TIGZONE CS310A.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 3 meseci, vrsta hlajenja: voda, varilni tok (maks.): 260 A, For sale: Rehm Invertig 260 ACDC 260 AMP 400 Volt AC/DC 2/4-stroke operation High-frequency start Bi-level function Current downslope Post-flow gas Balance control Suitable for welding steel, stainless steel, and aluminum Fully overhauled and tested Includes TIG torch, ground cable, gas hose, and 3-month warranty. Test welding is possible. A video of the machine in actual welding operation can be provided upon request. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside Europe using Euro pallets per shipment. All our machines are serviced and 100% ready for operation unless otherwise stated. The images above show the actual machine. We can also offer other types of machines, such as: Used, new, MIG, MAG, CO2, TIG, pulse, AC/DC, plasma, water-cooled, electrode. Pjdpjw I Rm Aefx Agpjrd We supply the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, As a machinery dealer based in Offenburg, we offer premium welding machines from Rehm. Many models are available immediately from stock. We are also happy to provide advice on individual requirements and specifications. Please feel free to contact us. Technical Data Prjdpfxjw Eil Ts Agpsd Model: 280 AC/DC Adjustment range TIG [A]: 3-280 Electrode (BOOSTER) [A]: 3-280 Duty cycle (DC) at Imax. (10 min.) TIG [%]: 100 Electrode (Booster) [%]: 60 Welding current at 100% DC at 40°C TIG [A]: 280 Electrode (Booster) [A]: 260 Fuse protection (slow-blow) [A]: 16 Torch cooling: water Protection class: IP 23 Power factor [cos phi]: 0.96 Power consumption at Imax. [kVA]: 11.9 Supply voltage [V]: 3 x 400 Line frequency [Hz]: 50 Control socket [pins]: 12 Welding cable socket [mm]: 13 Weight [kg]: 27 Dimensions [mm]: 520 x 360 x 460 Available accessories: Hand torch Ground cable Pressure regulator Available immediately. Collection in person. Forklift available. Shipping is also possible.

Leto izdelave: 1998, Stanje: rabljeno, Technical Details: Prodpfx Ageu Rnd Deped Temperature: 200-210 °C Conveyor speed: 1000 mm/min Max. workpiece length: 200 mm Total power requirement: 50 kW Machine weight approx.: 2.0 t Convection Reflow Soldering System for PCBs Soldering system for printed circuit boards (e.g. SMD type and/or mixed technology) and drying of SMD adhesives. The soldering system operates with the following functions: Infeed - Preheat - Soldering - Cooling - Outfeed. - with software features - can be integrated into a production line Further technical specifications: - Protective gas with nitrogen: 30 m³/h; 6 - 10 bar overpressure - Water consumption: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical operating power: 12 kW - Space requirements: L:6500 + loading station 2000 x W:1400 x H:2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with reloading head and discharge conveyor for handling e.g. PCBs - Machine is CE98 certified System suitable as a spare parts donor or for conversion/expansion. Sale as is. Offered at a reduced price.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Na prodaj je več reflow peči Rehm in sušilnih peči Rehm (lakirni sušilniki). Peči so v dobrem in očiščenem stanju ter popolnoma delujoče. 1 x Rehm VXP nitro 3850 (letnik 2010), tip 834 (projekt št. 2680), lokacija: Buchenstraße 18 - 20 / 93426 Roding = 3.500 € po dogovoru. Dodatno ponujamo: Asys TRM 03 (letnik 2012) Asys FPS (letnik 2010) Siplace S 27 in Siplace F 5 HM (letnik 2006) Exra X6 HSP (letnik 2008) – za rezervne dele Knodel sušilna peč (letnik 2015) Nutek Coating Inverter (letnik 2014) Podpfx Ajw Srqqegpord in še veliko več. Za več informacij in fotografij naših naprav nas prosim kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2021, Cutting range for steel up to 50 mm Performance at 100% duty cycle: 130 A Machine weight: approx. 130 kg Required space: approx. 650 x 400 x 900 mm ORIGINAL PRICE: ~6,000 EURO Very good condition Very little used Equipment: - A151/6 torch - Ground cable 25 mm² Adjustment range, stepless [A]: 25 - 150 Duty cycle at max. current (10 min) at 20°C [%]: 60 Mains connection [V]: 3 x 400 V Fuse protection (slow-blow) [A]: 35 Protection class: IP 23 Max. cutting power [kW]: 21 Prjdpfxjv Da Udj Agpsd Current/Voltage at 100% duty cycle [A/V]: 130/130 Max. power consumption: 24.5 kVA Power factor [cos phi]: 0.97 Max. quality cut with REHM high-performance torch: 40 mm Max. separation cut, manual, for S 235/S355 [mm]: 50

Stanje: zelo dobro (rabljeno), Manufacturer: REHM Model: Synergic. PRO 2 450-4 Machine condition: very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130 kg SMC Technology - Smart Machine Control A unique control concept for step-controlled devices developed by Rehm: Arc length is regulated not only by measuring welding voltage and current, but also via digital determination of wire feed speed. This enables excellent welding results and makes operation easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures excellent arc ignition and high arc stability during welding. Fine-tuning can be done manually using the SDI dial. This allows you to regulate heat input, which can have a positive effect on the amount of post-weld processing required. - RSC – Realtime Speed Control Digital monitoring and regulation of wire feed speed with high precision and in real time. With RSC, changes in arc length are compensated faster and more effectively. - CCM – Characteristic Curve Memory Prsdpfev Nrfxjx Agpsd Integrated welding parameter database with expert knowledge. By selecting the wire type, diameter, and welding current/voltage level, preset welding parameters are called up synergistically. During welding, the current parameter values are compared with target settings and are immediately corrected if necessary. - RMI – Rehm Machine Interface The device's control panel is extremely simple and guarantees avoidance of incorrect selections. Simple parameter selection makes the welder's job easier, helps minimize errors, and reduces setup time.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, REHM P 300 W 0,8/1,0 s profesionalnim vozičkom Stanje: razstavni stroj Obseg dobave: - Abicor Binzel 401, 4 m - Kabel za maso 5 m Prjdpfxexamgbe Agped - Redukcijski ventil - Adapter za košaraste kolute

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 193568, Offer 24606 Technical Data: - Welding current max. 450 A at 60% duty cycle - 320 A at 100% duty cycle - Welding current adjustable in 3 coarse and 12 fine steps - 50 to 450 A - Separate wire feeder unit with 1 m intermediate hose package - 4-roller wire feed, steplessly adjustable - 2-stroke and 4-stroke operation - Digital volt and ampere display Podpfx Agjvt Twqjpsrd - Spot welding function - Intermittent welding function - Water-cooled torch package, 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Space required: approx. W 750 x D 1100 x H 1600 mm - Weight: approx. 180 kg

Stanje: rabljeno, Technical details: Power consumption: 240 A Voltage: 3x400 V Open-circuit voltage: 91 V Apparent power: 9.3 kVA Approx. machine weight: 28 kg Machine dimensions: 1.0 x 0.6 x 1.0 m Welding Rectifier (Inverter) TIG (Steel/Stainless Steel) and Manual Arc Welding Direct current TIG = up to 240 A / 19.6 V Manual Arc Welding = up to 240 A / 19.6 V 2/4-stroke mode switching, stepless switchable to pulse Protection classification: IP 23 Water-cooled with frost protection Shielding gas / solenoid valve Torch head gas-cooled with remote control for welding current Prodpfxju U Iixj Agped Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters

Stanje: rabljeno, Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding machine with inverter welding power source Serial No. Year of manufacture: 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Adjustment range stepless Power supply 400 Volt, 50 Hz, 32 Amp plug Podpowa Uwdsfx Agpjrd - Separate 4-roller wire feeder with connecting hose package - Digital display for voltage and current - Pulse welding function with single and double pulse - 2-stroke and 4-stroke welding modes - 4 meter Binzel hose package with central connection - Water-cooled - Shielding gas pressure regulator - MIG/MAG pulsed arc welding - MSG double pulse welding - MIG/MAG welding Required space (L x W x H): 1150 x 510 x 1350 mm Weight: 200 kg Good condition

Stanje: rabljeno, Length: 850 mm Height: 975 mm Total power requirement: 10.5 kW Machine weight approx.: 175 kg Space required approx.: 850 x 450 x 1575 mm Technical Data Infinitely variable adjustment range [A]: 10–300 Duty cycle (DC) at max. current (10 min) [%]: 80 Welding current at 100% DC [A]: 270 No-load voltage [V]: 75 Mains connection [V]: 3/PE 400 Continuous output at 100% DC [kVA]: 12.2 Fuse (slow): [A]: 20 Power factor [cos phi]: 0.98 Insulation class: H Torch cooling: water-cooled Protection class: IP 23 Wire diameter steel & stainless steel [ø mm]: 0.8 / 1.0 Wire diameter aluminium [ø mm]: 1.0 / 1.2 Sound level according to DIN 45635 [db(A) 1m]: 68 Equipment: - without accessories Psdpfx Agsvuz Srjpsrd

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 171941, varilni tok pri 60% delovnega cikla: 245 A, varilni tok pri 100% delovnem ciklu: 210 A, vrsta zaščite (IP koda): IP23, varilni tok (min.): 5 A, varilni tok (maks.): 260 A, The machine on offer is a used Rehm Transtig 260 DC. The machine is in perfect technical condition and is fully functional. There are minor signs of use visible. All switches as well as the digital display work properly, and the machine welds flawlessly. The Transtig 260 DC is ready for operation and available for inspection in our warehouse. Test welding is possible at any time; however, we recommend arranging an appointment with us in advance. With the Transtig 260 DC, you can perform both TIG and electrode welding. The machine combines professional welding performance with user-friendly operation. Individual welding parameters can be set easily via the digital display. The Rehm Transtig 260 DC offers a welding current range of 5–260 A with a high duty cycle. Please refer to the type plate for specific welding current ranges and duty cycles for either TIG or electrode welding. Prjdpoupih Hsfx Agpjd PLEASE NOTE: This offer pertains to the machine only! For an additional charge, new torches, earth cables, pressure regulators, etc., can also be supplied. These accessories are, of course, brand new!

Stanje: novo, As a machinery dealer based in Offenburg, we also offer welding equipment from Rehm. You can find an overview of our machines on our website. If you have any questions, just give us a call. MIG MAG Welding Machine REHM FOCUS.ARC 300 Podpfxew Eik Ne Agperd Manufacturer: REHM Model: FOCUS.ARC 300 Scope of delivery: - Abicor Binzel 401 torch package, 4m - Ground cable 50mm, 5m - Pressure reducer - Basket spool adapter Immediately available. For self-collection. Forklift on site. Shipping also possible. Subject to errors, changes, and prior sale. Not the right machine for you? Then visit us on our website.

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 195311, Offer 24601 Technical Data: Prjdpfx Agovt Trzjpjd - Welding current: max. 450 A at 60% duty cycle - 320 A at 100% duty cycle - Welding current adjustable in 3 coarse and 12 fine steps - 50 to 450 A - Separate wire feeder unit with 1 m interconnecting cable - 4-roller wire feed, infinitely variable - 2-stroke + 4-stroke operation selectable - Digital volt and amp display - Spot welding - Interval welding - Water-cooled torch assembly, 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Dimensions (approx.): W 750 x D 1100 x H 1600 mm - Weight (approx.): 180 kg

Stanje: rabljeno, Technical Details: Power Input: 240 A Voltage: 3x400 V Open Circuit Voltage: 91 V Power Consumption: 9.3 kVA Machine Weight Approx.: 28 kg Machine Dimensions: 1.0 x 0.6 x 1.0 m Welding Rectifier (Inverter) TIG (Steel/Stainless Steel and MMA manual welding) Direct Current TIG welding up to 240 A / 19.6 V MMA welding up to 240 A / 19.6 V Switchable between 2/4-stroke operation, stepless transition to pulse mode Protection Class IP 23 Prodpfeu U Ihzjx Agped Water-cooled with antifreeze Torch head gas-cooled with remote regulation for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Earth clamp and grounding cable 3.3 meters

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Reflow oven by Rehm Psdpfx Agoudk Amepord

Stanje: rabljeno, very good condition Podpfx Agjhc T Irspord

Stanje: novo, As an authorized REHM dealer, we now offer customers in Offenburg and the surrounding area the opportunity to receive up to 40% government funding when purchasing a new MIG/MAG PULSE welding machine. Our welding specialist and REHM expert is happy to advise you and looks forward to your inquiries. REHM MIG/MAG Welding Machine FOCUS.ARC P REDUCES CO2 AND EARNS GOVERNMENT SUBSIDIES WHO PROVIDES FUNDING? The Federal Office for Economic Affairs and Export Control (BAFA) supports investment measures for the energy optimization of systems and processes. WHAT IS FUNDED? Investments that demonstrably lead to energy savings—and thus to a reduction in CO₂ emissions—are eligible for grants. For example, if you want to replace step-switched welding machines with high energy consumption with efficient REHM welding technology, you can apply for Module 4 funding. Costs for creating the energy-saving concept and for implementation support provided by an external energy consultant are also eligible. The total payback period of the entire measure must last more than 2 years. WHAT IS THE LEVEL OF FUNDING? Up to: - 40% of the costs - €900 per tonne of CO₂ - €10 million per project BAFA subsidizes large companies with up to 30% of eligible costs (max. €500 per ton of CO₂ saved) and small and medium-sized enterprises (SMEs) with up to 40% (max. €900 per ton of CO₂ saved). The maximum funding per investment project is €10 million. WHO IS ELIGIBLE FOR FUNDING? Private and municipal companies with a registered office or branch in Germany are eligible to apply. The planned measures must be executed within the territory of the Federal Republic. The mandatory energy-saving concept must be prepared by a BAFA-approved energy consultant. HOW TO APPLY FOR FUNDING? 01. List: Create a list of all devices to be replaced and all new devices to be purchased. 02. Review: We will collect the necessary data at your premises and provide a preliminary assessment of your funding eligibility. At the same time, we will prepare a quotation for the new welding machines. 03. Energy Consultant: We process all data for you and forward it to a cooperating energy consultant. This saves you time and costs. 04. Application: After reviewing the data, the energy consultant will submit the funding application on your behalf. 05. Processing Time: If urgent, we can expedite your application, reducing the processing time to approximately 10 to 15 days. The following REHM MIG/MAG PULSE welding machines are BAFA-eligible: Without wire feed case: FOCUS.ARC P 250 0.8/1.0mm FOCUS.ARC P 250 W 0.8/1.0mm FOCUS.ARC P 300 1.0/1.2mm FOCUS.ARC P 300 W 1.0/1.2mm FOCUS.ARC P 350 1.0/1.2mm FOCUS.ARC P 350 W 1.0/1.2mm FOCUS.ARC P 400 1.0/1.2mm FOCUS.ARC P 400 W 1.0/1.2mm FOCUS.ARC P 450 1.0/1.2mm FOCUS.ARC P 450 W 1.0/1.2mm Pjdpfx Agew Eikvspsrd With wire feed case: FOCUS.ARC P 250 S 0.8/1.0mm FOCUS.ARC P 250 WS 0.8/1.0mm FOCUS.ARC P 300 S 1.0/1.2mm FOCUS.ARC P 300 WS 1.0/1.2mm FOCUS.ARC P 350 S 1.0/1.2mm FOCUS.ARC P 350 WS 1.0/1.2mm FOCUS.ARC P 400 S 1.0/1.2mm FOCUS.ARC P 400 WS 1.0/1.2mm FOCUS.ARC P 450 S 1.0/1.2mm FOCUS.ARC P 450 WS 1.0/1.2mm Our welding specialist and REHM expert will be pleased to advise you and looks forward to your inquiries.

Leto izdelave: 2014, Stanje: dober (rabljeno), številka stroja/vozila: 239615, Offer 22673 Technical specifications: - Welding current: max. 500 A at 60% duty cycle - 375 A at 100% duty cycle Prjdpfom Udf Njx Agpsd - Welding current adjustable in 3 coarse stages + 12 fine stages - 50 to 500 A - Separate wire feed unit with intermediate assembly, length 15 m - 4-roller wire feed, infinitely adjustable - 2-stroke + 4-stroke control - Digital volt and ampere display - Spot welding function - Interval welding function - Water-cooled welding torch package, length 4 m - Ground cable, length 10 m - Pressure regulator - Power connection: 400 V / 50 Hz / 63 A - Space requirement: approx. W 750 x D 1100 x H 1600 mm - Weight: approx. 300 kg

Leto izdelave: 1998, Stanje: rabljeno, Temperature: 200-210 °C Conveyor Speed: 1000 mm/min Max. Workpiece Length: 200 mm Total Power Requirement: 50 kW Machine Weight approx.: 2.0 t Convection Reflow Soldering System for Printed Circuit Boards Soldering system for printed circuit boards (e.g. SMD and/or mixed technology) and for curing SMD adhesives. The soldering system operates with the following functions: Infeed - Preheat - Soldering - Cooling - Outfeed. - Equipped with software functions - Can be integrated into a production line Further technical specifications: - Shielding gas with nitrogen: 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical supply: 12 kW - Space requirement: L:6500 + loading station 2000 x W:1400 x H:2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with reloading head and discharge belt for accommodating, for example, printed circuit boards. - Machine is CE98 certified System suitable as a donor for spare parts or for conversion/expansion. Sale as is. Priced for quick sale. Prjdeu Rwauspfx Agpjd

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Reflow oven manufactured by Rehm Predpoudk Agefx Agpjd

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 195312, Offer 24596 Technical Data: Prjdpfovt Tvmex Agped - Welding current: max. 450 A at 60% duty cycle (ED) - 320 A at 100% duty cycle (ED) - Welding current adjustable in 3 coarse levels + 12 fine levels - 50 to 450 A - Separate wire feed case with interconnecting cable: 1 m - 4-roll wire feed, continuously adjustable - 2-stroke + 4-stroke operation - Digital volt and ampere display - Spot welding function - Interval welding function - Water-cooled torch package: 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Space requirement: approx. W 750 x D 1100 x H 1600 mm - Weight: approx. 180 kg