Rems Uni nakup rabljenega (18)

Stanje: rabljeno, Stiskalni stroj, REMS Power-Press XL ACC, rabljena oprema Proizvajalec: Rems Tip: Power-Press XL ACC Dodoxlp T Ispfx Ag Njkt Obseg stiskanja: Ø 10 – 108 mm (do 110 mm) Tlačna sila: 32 kN Motor: 450 W univerzalni motor Napajanje: 230 V ali 110 V, 50–60 Hz Teža: približno 5,5 kg Dimenzije (V x Š x G): 800 x 335 x 230 mm Dolžina kabla: 2.900 mm Dodatki: več kot 400 vrst REMS stiskalnih čeljusti, adapterji za druge proizvajalce Dodatne funkcije: Samodejni povrat (Automatic Circuit Control – ACC) Vrtljiv nosilec stiskalnih čeljusti z avtomatskim zaklepanjem Združljiv z orodji čeljustmi drugih proizvajalcev Hitro stiskanje, npr. Geberit Mapress nerjaveče jeklo Ø 108 mm spoj v 15 sekundah Stiskalne čeljusti: 76,1; 88,9; 108 mm

Stanje: pripravljen za uporabo (rabljen), REMS stiskalno orodje, akumulatorska stiskalnica ACC Li-Ion Plus, rabljeni stroj Proizvajalec: Rems Tip: ACC Li-Ion Plus Skupne dimenzije: Širina: 520 mm Globina: 290 mm Višina: 120 mm Ključne značilnosti: Elektro-hidravlični pogon Stiskalna sila: 32 kN Primerno za cevi in spojke Ø 10–108 mm (v nekaterih primerih do 110 mm) Univerzalni motor: 1850 W Baterija: Li-Ion 14,4 V / 3,0 Ah (tehnologija Li-Ion Plus) Multifunkcijska elektronika: mehak zagon, zaščita pred preobremenitvijo, avtomatski povrat (ACC) 360° vrtljiv nosilec za čeljusti Vgrajena LED delovna lučka Djdpfxexl E Nfj Ag Nokt Ergonomska, lahka zasnova: približno 4,3 kg Stanje: Rabljeno, dobro delujoče. Dodatki: baterija, polnilnik.

Stanje: zelo dobro (rabljeno), REMS TORNADO 2010 THREADING MACHINE Product Description: - Reliable, highly efficient machine for threading, cutting, deburring, threading nipples, and flaring - For use in installations, locksmith workshops, and production plants - Robust, compact, and ergonomic design suitable for both construction sites and workshops - Operating principle: rotating material – stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large working area and chip tray - Adjustable material support - Exceptionally powerful and fast drive, e.g., 2” thread in just 15 seconds - Fully maintenance-free gearbox in a sealed oil bath - Two types of base available: - Portable version on 3 legs, with detachable large oil pan and chip tray - T-stand version with integrated larger oil pan and chip container, suitable for tabletop use. Fixed base or mobile carriage with material shelf for easy transport, optimal working height, stable – available as an optional accessory - Three high-performance motor options: - High-efficiency universal motor, 1700 W, overload protection, rotation speed 53 rpm - Capacitor motor, 2100 W, overload protection. Two speed settings: 52 and 26 rpm, also under full load. Very quiet operation - Three-phase motor, 2000 W, overload protection. Two speed settings: 52 and 26 rpm, also under full load. Very quiet operation - Convenient two-stage foot safety switch with emergency stop, enabling operation using full body weight - Two automatic clamping chucks with self-centering jaws. Material can be clamped and released quickly and easily - Self-tightening chucks ensure maximum holding strength - Strong, reliable pump with high delivery capacity - Optimum multi-directional supply of threading lubricant through the threading head ensures clean threads and long tool, gearbox, and motor life - Single automatic universal die head for all thread types, including extended threads; automatic opening with thread length control for tapered threads Djdpfjv T Truox Ag Nekt - Quick and easy thread size adjustment - Clear thread size scale - Easy and quick die changing thanks to positioned mounting - Reliable, indestructible, high-quality REMS threading dies with optimal geometry guarantee easy material entry, light threading, and clean threads. Made from high-strength, specially hardened steel for exceptionally long life - Self-centering pipe cutter. Stable forged steel yoke. Ergonomic wide handle for strong spindle pressure - Specially hardened cutting wheel made from tough, high-grade tool steel ensures long service life - Internal deburrer: stable, easy-to-use deburring device with adjustable deburring position - Specially hardened and ground blade guarantees easy deburring and exceptionally long life - Two blades for optimum burr removal, especially on small pipe diameters

Stanje: dober (rabljeno), Thread cutting machine, pipe threading machine, threading head, thread cutting chuck, threading chuck, thread cutting device - Manufacturer: Rems, threading head Dkodpswq Nviofx Ag Nst - Pipe size: 2 1/2 to 4 inches - Spindle bore: dimensions see photos - Dimensions: 410/400/H340 mm - Weight: 50 kg

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Workpiece diameter - max.: 8 - 50 mm Workpiece length: 5 - 500 mm Spindle speed: 100 - 1000 rpm Workpiece diameter - max.: Ø 50 mm (solid material) Workpiece diameter - min.: Ø 8 mm (solid material) Workpiece diameter - max.: Ø 70 mm (tubing) Workpiece diameter - min.: Ø 8 mm (tubing) Wall thickness: 1 - 10 mm Centre height: 300 mm Spindle bore: Ø 90 mm Cut-off length with swing stop min./max.: 5 - 500 mm Total power requirement: approx. 25 kW Machine weight approx.: on request t Machine dimensions (LxWxH): approx. 5.8 x 1.5 x 1.7 m Control cabinet dimensions: 1300 x 450 x 1950 mm Dimensions (L x W x H): control panel: 0.36 x 0.30 x 0.68 m Dimensions (L x W x H): material feed: 5.5 x 0.95 x 1.15 m Cut-off turning and end-finishing machine including bar feeder (Manufacturing processes: cutting to length and deburring, parting-off, facing, grooving, centering, and more possible) Working principle: stationary material – rotating tools Further features: - Steplessly adjustable parting/cut-off head speed: 100 - 1000 rpm Dkodpfx Asu Iww Ueg Not - End-machining: 4 tool sets with speed from 52 - 1320 rpm - Feed for cut-off head/tool: stepless, 0 - 0.3 mm/rev, with rapid and working feed, hydraulic - Feed for deburring device: stepless up to 0 - 175 mm/sec. - Material feed speed: 170 mm/sec. - Piece counter - Bar feeder Operation via operator panel/control panel i.D.

Stanje: novo, Electric dehumidifier/construction dryer for commercial use. Designed for drying rooms, dehumidifying basements, and drying materials such as concrete, masonry, plaster, and screed. Refrigeration unit with rotary vane compressor and condenser motor, 230 V, 50 Hz, 1200 W, featuring automatic hot gas defrost system for continuous operation. Very quiet running. Maximum dehumidification capacity: 80 l/24 h, maximum airflow: 850 m³/h. Electronic control unit with illuminated 3" display and memory function. Electronic hygrostat, hour counter, and power consumption meter. Air filter. Housed in robust steel sheet casing on a mobile steel tube frame with large wheels. Supplied in a box. Condensate tank not included (see accessories below!) Dehumidification capacity: up to 80 l/24 h Airflow: up to 850 m³/h Special offer: Dedpfjuy Thmox Ag Nskt When purchasing a REMS Secco 80 Set, you will receive 1 REMS Detect W moisture meter free of charge. You additionally save €233.55. This offer is valid until 31/12/2024.

Stanje: novo, Electric dehumidifier/construction dryer for commercial use. Suitable for drying rooms, dehumidifying basements, etc., and for drying materials such as concrete, masonry, plaster, and screed. Refrigeration unit with rotary piston compressor and capacitor motor, 230 V, 50 Hz, 900 W, featuring electronic defrost for continuous operation. Very quiet running. Maximum dehumidification capacity: 50 l/24 h; maximum air flow: 265 m³/h. Electronic control unit with large illuminated operating panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate tank. Durable plastic housing with castors. Supplied in a carton. Dehumidification capacity: ≤ 50 l/24 h Dkedpfx Aotty Rajg Not Air flow: ≤ 265 m³/h

Stanje: novo, REMS Orkan 2050. Electric construction site fan for commercial use. Suitable for supplying and extracting air in rooms, spaces between structures, shafts, cavities, as well as for ventilating and providing airflow cooling for machines, marquees, and event halls. Assists with air exchange in damp, musty basements. Particularly suitable for accelerating the drying of, for example, concrete, masonry, plaster, and screed. Capacitor motor 230V, 50Hz, 145W, designed for continuous operation. Very quiet operation. Airflow rate: 1740/2050 m³/h. Housed in a robust plastic casing. Supplied in a carton box. Airflow rate: 2050 m³/h Motor: 230 V, 50 Hz, 145 W Djdpfx Agotty Nne Njkt

Stanje: novo, REMS Orkan 1360. Electric construction site ventilator for professional use. Designed for ventilating and extracting air from rooms, cavities, shafts, voids, and for providing ventilation and wind cooling for machinery, event tents, and exhibition halls. Supports air exchange in damp, musty basements, aids in drying processes for concrete, masonry, plaster, and screed, and suitable for inflating, for example, bouncy castles or hot air balloons. Equipped with a capacitor motor 230V, 50Hz, 145W, suitable for continuous operation. Very quiet running. Air flow rate of 1,360 m³/h. Housed in a robust plastic casing. Supplied in box. Dedpfxeuyg Utj Ag Nekt Air flow rate: 1,360 m³/h Power: 145 W

Stanje: rabljeno, Thread cutting machine, pipe threader Djdsfyh Ebjpfx Ag Nekt - without tools - Operating voltage: 220 Volts - Dimensions: 830 x 530 x H1080 mm - Weight: 64 kg

Stanje: dober (rabljeno), Reciprocating pipe saw, pipe jigsaw, beam jigsaw, reciprocating saw, sabre saw - Ideal for sawing work, even in wet or damp rooms and shafts, wherever electric reciprocating saws are not permitted - Output power: 1000 W - Steel pipes: up to max. Ø 160 mm Dkjdpfjcm D A Rox Ag Net - Supplied in a case - Quantity: 4 saws available - Price: per unit - Dimensions: 690/200/H120 mm - Weight: 8 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, klešče za rezanje navojev, stroj za rezanje navojev, stroj za rezanje cevičnih navojev Dsdpfx Agob A Raco Njkt -Palčni navoj: 1/4"–1 1/2" cola -Teža: 14,5 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, navojni rezalnik, stroj za rezanje navojev, orodje za rezanje cevastih navojev -Colski navoji: 1" - 2" col Dkodpfx Agjb A Nixs Not -Transportni kovček -Teža: 17 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s čeljustmi Strehler, orodje za rezanje navojev, stroj za rezanje navojev, rezalnik cevnih navojev – Palčni navoj: 1/2"-3/4" Dodpfjb A Rabsx Ag Nokt – Teža: 4,5 kg

Stanje: dober (rabljeno), Glava za rezanje navojev s Strehler čeljustmi, navojno orodje, stroj za rezanje navojev, rezalnik navojev za cevi -Navoj v colah: 1/2"-2" cola -Teža: 15 kg Dkjdpfx Asb A N I Njg Nst

Stanje: dober (rabljeno), Glava za rezanje navojev s Strehler čeljustmi, navojna kljuka, stroj za rezanje navojev, rezalnik navojev za cevi -Colski navoj: 1/2" - 2" -Pakiranje: po dogovoru -Teža: 15 kg Djdpfx Aeb A N Uqjg Nokt

Stanje: dober (rabljeno), Glava za rezanje navojev s Strehler čeljustmi, navojno orodje, stroj za rezanje navojev, rezalnik navojev za cevi Dodpfxsb A Raas Ag Nekt -Palčni navoj: 1"-2" palca -Teža: 1,5 kg

Stanje: rabljeno, Thread cutting dies, replacement cutting dies, thread cutting head with Strehler dies, thread cutting stock, thread cutting machine, pipe threader -various thread cutting sizes Djdod Aay Dopfx Ag Nekt -price: complete -weight: 12 kg