Mep Shark 332 Nc Evo nakup rabljenega (6.774)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Rabljena avtomatska hidravlična tračna žaga za kovino MEP SHARK 332 NC EVO Dimenzije lista: 3320x27x0,9mm Kot reza: od 45° do +60° Gjdoul Svlopfx Aa Usiu Načini delovanja: ročni, polavtomatski-dinamični, polavtomatski, avtomatski Rezalna hitrost: 15-100m/min (inverter) Kapaciteta reza: pri 0° - okroglo 300mm - kvadrat 260mm - pravokotnik 330x260mm Dimenzije: 2600x2320x2000mm Leto izdelave: 2011 Teža: 1050kg Stroj je v celoti obnovljen in testiran.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 250 mm, največja širina rezanja: 280 mm, dolžina tračnega lista: 2.950 mm, hitrost tračne žage: 1.667 mm/s, širina tračne žage: 27 mm, TEHNIČNI PODATKI Mere tračne žage: 2.950 x 27 x 0,9 mm Hitrost: 15-100 m/min Odprtina primeža: 285 mm Območje rezanja pri 90° okroglo: 250 mm Območje rezanja pri 90° kvadratno: 220 mm Območje rezanja pri 90° ploščato: 280 x 220 mm Območje rezanja pri 60° okroglo: 120 mm Območje rezanja pri 60° kvadratno: 80 mm Območje rezanja pri 60° ploščato: 140 x 100 mm Območje rezanja pri 45° okroglo: 230/200 mm Območje rezanja pri 45° kvadratno: 200/170 mm Območje rezanja pri 45° ploščato: 220 x 200/200 x 140 mm Krmiljenje: klasično PODATKI O STROJU Skupna priključna moč: 2,2 kW Gjdpfx Aaszapxzo Usiu Teža: 990 kg Dimenzije stroja: 2.500 x 2.230 x 2.050 mm

Stanje: novo, Saw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 - 100 m/min Vice width: 335 mm Cutting capacity at 90° (round): 300 mm Cutting capacity at 90° (square): 260 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 45° (round): 260 / 200 mm Cutting capacity at 45° (square): 250 / 180 mm Cutting capacity at 45° (flat): 270 x 200 / 200 x 160 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (square): 170 mm Cutting capacity at 60° (flat): 170 x 170 mm Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Electro-hydraulic, fully automatic bandsaw with multi-microprocessor control, featuring additional semi-automatic, semi-automatic dynamic, and manual operating modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic machine with two controlled axes, allowing programming of 1000 different cutting programs—each with its own cut length and quantity—using the same material thickness. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual downfeed of the saw bow to the desired position, with cycle start via hand button) - Manual or semi-automatic dynamic cycle for direct cuts without programming. Key features: - New fieldbus communication system (Modbus protocol) - Display, 20 characters x 4 lines, showing technical parameters such as: - Saw blade speed - Number of programmed and completed cuts - Saw blade thickness - Feed length - Cutting time - Ammeter - Blade tension - Display of up to 100 diagnostic messages and warnings, all in the respective user language. - Display and logging of alarm and error messages with incident history display feature. - Automatic parameter adjustment via control system when a new driver or inverter is installed. - Electronic inverter for continuous regulation of blade speed from 15 to 100 m/min. - Latest-generation hydraulic control unit, highly efficient and low in energy consumption. - New 600 mm material feed system with stepper motor and ball screw mounted on opposed bearings. - Programmable saw bow stroke from control panel for adaptation to the material being cut. - Electronic blade tension monitoring. - Automatic cutting load monitoring via a servo valve mounted directly on the cylinder. - Coolant tray (with two electric pumps for blade lubrication/cooling) integrated in the machine base. - Chip drawer (can be replaced by a swarf conveyor – see optional accessories) - Prepared for installation of a minimum lubrication system for the saw blade (optional), in addition to standard emulsified oil lubrication. - Chip removal brush. - Machine designed for pallet truck transport. Godpfxoyv Nyle Aa Usiu - Bi-metal bandsaw blade for solid and profile material.

Stanje: novo, 2 Speeds 36/72 m/min Cutting capacity at 90 degrees (round): 300 mm Cutting capacity at 90 degrees (square): 260 mm Cutting capacity at 90 degrees (flat): 330x260 mm Cutting capacity at 60 degrees (round): 180 mm Cutting capacity at 60 degrees (square): 170 mm Cutting capacity at 60 degrees (flat): 170x170 mm Cutting capacity at 45 degrees (round): 260/200 mm Cutting capacity at 45 degrees (square): 250/180 mm Cutting capacity at 45 degrees (flat): 270x200/200x160 mm Saw blade dimensions: 3650x27x0.9 mm Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic dynamic/manual function. Equipped with MEP-30 control for mitre cuts from 45° right up to 60° left. The MEP 30 represents the latest generation of control units. Semi-automatic function: Gsdpfxsyv Nmlo Aa Usiu - Vice closes and motor starts - Saw head lowers for cutting - Motor switches off - Saw head rises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Start of cycle via hand button - Upper position is saved automatically Main features: - Hydraulic unit with electric valve for high efficiency, and high-pressure hydraulic pump (200 bar) - Electronic machine monitoring with next-generation microcontroller - Centralised electrical system in the main switch cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, saw blade motor current, saw head position, saw blade speed, blade tension) - Manual/semi-automatic/dynamic function as standard Additional features: - Operator panel with low voltage: Membrane keypad made of polyester with thermoformed, raised buttons and confirmation control light - Manual 24V cycle selector (IP55 handle) - Complete program for all special cutting cycles - New hydraulic control device with low energy consumption and standby mode - Rotary table on roller bearing (420 mm) with preloaded thrust bearing, fitted with replaceable steel worktable - Saw bow stroke programmable directly from the control panel for material-specific adjustment - Clamping device laterally adjustable left and right, with quick-release vice - Manually operated blade tension control with display on screen via electronic transducer

Stanje: rabljeno, Leto izdelave: 2006, Dimenzije tračne žage: 2950x27x0,9 mm 2 hitrosti: 15-100 m/min Odprtina primeža: 285 mm Gedpfx Ajyvvm Eea Uoiu Območje rezanja pri 90°: kvadrat 220 mm Območje rezanja pri 90°: okroglo 250 mm Območje rezanja pri 90°: ploščato 280x220 mm Območje rezanja pri 60°: okroglo 120 mm Območje rezanja pri 60°: kvadrat 80 mm Območje rezanja pri 60°: ploščato 140x100 mm Območje rezanja pri 45°: okroglo 230/200 mm Območje rezanja pri 45°: kvadrat 200/170 mm Območje rezanja pri 45°: ploščato 220x200/200x140 mm Skupna potrebna moč: 2,2 kW Teža: 990 kg Dimenzije stroja: 2500x2230x2050 mm

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Giedpfxjfg E H Ee Aa Uju Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vise opening: 335 mm Band speed: 15 – 100 m/min Automatic feed: 600 mm Saw blade dimensions: 3650 x 27 x 0.9 mm Controller: MEP CNC Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (L x W x H): 3.3 x 2.83 x 2.23 m Electro-hydraulic fully automatic band saw, with additional: * semi-automatic operation * semi-automatic dynamic operation * manual operation Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL design) * MEP - WINDOWS numerical control unit * 7” user interface with touch screen display * Mechanical buttons for the main operating functions * Ensures reliable operation, simple and intuitive use * Real-time monitoring of all cutting parameters * Swivelling arm for convenient and safe operation * Display and entry of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * For non-programmed cutting operations - Safety enclosure to protect the operator - Infinitely variable cutting speed from 15 to 100 m/min * via frequency inverter - Latest generation hydraulic unit * Highly efficient with minimal energy consumption - Material feed via stepper motor and precision ball screw * Mounted with counter bearings * Single stroke 600 mm, repeatable for any length - Saw head positioning and feeder movement via joystick - Automatic detection of start-of-cut position - Manual blade tension control with display indication * via electronic converter - Automatic cutting force monitoring * Via servo valve mounted directly on the cylinder - Integral coolant tray in base frame - Chip removal brush - Bi-metal band saw blade for solid and profile materials - Tools and operation manual with spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed Manufacturer's note – please note: When installing this saw on a circuit with a residual current device (RCD/ELCB), this must be all-current sensitive (Type B) and not less than 300 mA. Godpfexabavox Aa Ueiu

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Gsdpfofg E H Uox Aa Usiu Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. - Base frame designed for complete coolant recovery, even during maximum angle cuts. - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: square 250 x 250 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 170 x 170 mm Cutting capacity at 60 degrees: round 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Mounted front right, swivelling - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of bow descent - Carbide blade guides - Hydraulic blade tensioning including digital value display - 2x saw blade speeds - 1x Bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow Godoxaagbspfx Aa Uoiu - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Material support height 600 mm Feed min/max 50,000 mm Vise opening 335 mm Blade speed 15 - 100 m/min Automatic feed 600 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1,105 kg Dimensions (L x W x H) 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally equipped with: * semi-automatic * semi-automatic dynamic * manual operation modes Gijdpfxexab S Eo Aa Usu Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP - WINDOWS CNC control unit * User interface with 7” touchscreen display * Mechanical keys for machine operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivel arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycles selectable * For non-programmed cutting operations - Safety enclosure for operator protection - Infinitely variable cutting speed adjustment from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * Highly efficient with low energy consumption - Material feed via stepper motor and ball screw * Mounted on counter-rotating ball bearings * Single stroke 600 mm, repeatable for any required length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display indicator * Electronic converter - Automatic monitoring of cutting force * Servo valve mounted directly on the cylinder - Coolant tray integrated into machine base - Chip removal brush - Bimetal saw blade for solid and profile materials - Tool kit and operating manual with spare parts list * Mitre accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter: 300 mm Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Cutting range at 45 degrees, flat: 270 x 200 mm Cutting range at 45 degrees, round: 260 mm Cutting range at 45 degrees, square: 250 x 250 mm Cutting range at 60 degrees, flat: 170 x 170 mm Cutting range at 60 degrees, square: 170 x 170 mm Cutting range at 60 degrees, round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Heavy-duty electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted at the front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable bow-feed rate adjustment - Carbide blade guides - Hydraulic blade tensioning incl. digital value display - 2 blade speeds - 1 bi-metal band saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame Giedpfx Asxaav Aoa Usu - Electro-hydraulic opening of the vice

Stanje: novo, Model designation Gisdpfjgvkafsx Aa Ueu Shark 332-1 SXI evo

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Rabljena avtomatska tračna žaga za kovino MEP SHARK 282 nc evo Leto izdelave: 2011 Dimenzije lista: 2950x27x0,9mm Kot reza: od -45° do +60° Štirje načini delovanja: ročno, polavtomatsko dinamično, polavtomatsko in avtomatsko Gjdeykvg Hepfx Aa Uoiu Rezalna hitrost rezila: od 15 do 100m/min Kapciteta reza pri 0°: - okroglo 250mm - kvadrat 220mm - pravokotnik 280x220mm Teža stroja: 980kg Stroj je v celoti obnovljen.

Leto izdelave: 2003, stanje: rabljeno, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Giedpora Rrljfx Aa Uou Machine weight: approx. 1050 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 280 mm, največja širina rezanja: 330 mm, dolžina tračnega lista: 3.650 mm, hitrost tračne žage: 1.667 mm/s, širina tračne žage: 27 mm, TEHNIČNE PODROBNOSTI Mere tračne žage: 3.650 x 27 x 0,9 mm Hitrost: 15/100 m/min Območje rezanja pri 90° okroglo: 280 mm Območje rezanja pri 90° kvadratno: 260 mm Giodpfx Ajzaptrja Ueu Območje rezanja pri 90° ploščato: 330 x 260 mm Območje rezanja pri 45° okroglo: 260 mm Območje rezanja pri 45° kvadratno: 250 mm Območje rezanja pri 45° ploščato: 270 x 200 mm Območje rezanja pri 60° okroglo: 180 mm Območje rezanja pri 60° kvadratno: 170 mm Območje rezanja pri 60° ploščato: 170 x 170 mm PODROBNOSTI O STROJU Skupna potrebna moč: 2,2 kW Teža: 1.240 kg Primež: 340 mm Dimenzije: 2.020 x 2.040 x 1.740 mm OPREMA - Valjčna proga 2.000 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2020, Rabljena avtomatska tračna žaga MEP Shark 350 NC HS 5.0 Dimenzije lista: 4640x34x1.1mm Hitrost lista: od 15-115 m/min (inverter) Avtomatski napenjalec lista: 1600kg Avtomatski transporter opilkov Nastavljiv pritisk primežov Giodpfx Aewwr Tqea Uju Kapaciteta reza: okroglo 350mm, kvadrat 350x350mm Leto izdelave: 2020 Dimenzije stroja: 3045x2025x(v)2225mm Teža: 2800kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Rabljena avtomatska hidravlična tračna žaga za kovino MEP Shark 230 nc hs 5.0 Avtomatski polžasti odstranjevalec opilkov Dimenzije lista: 2950x27x0,9 Izbira rezalne hitrosti z variatorjem: od 15-100 m/min Kapaciteta reza: okroglo 230mm, kvadrat 230x230mm Generalno servisiran in obnovljen stroj Letnik: 2015 Max. rezalna kapaciteta je 230 × 230 mm Možnost rezov tudi v polavtomatskem načinu Godpfxotva Nhe Aa Ueiu Stroj je v celoti servisiran.

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: omejena funkcionalnost, največja višina reza: 230 mm, največja širina rezanja: 245 mm, skupna višina: 1.680 mm, skupna širina: 1.950 mm, skupna masa: 1.000 kg, lastna masa: 1.000 kg, dolžina pomika po osi Y: 500 mm, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, dolžina odseka (maks.): 9.999 mm, potrebna višina: 2.100 mm, zahteva za prostor dolžina: 2.900 mm, potrebna širina: 1.950 mm, dolžina mize: 2.800 mm, širina mize: 245 mm, delovna višina: 890 mm, Dodatne tehnične podrobnosti so navedene v navodilih za uporabo in vzdrževanje, ki jih boste prejeli ob prodaji. Godjx Dirzspfx Aa Ueiu Za dodatna vprašanja nas lahko kontaktirate po telefonu ali e-pošti. Lep pozdrav, Weber Geländersysteme

Stanje: rabljeno, Leto izdelave: 2018, Mere tračnega lista 3650x27x0,9 mm Hitrost 15/100 m/min Območje reza pri 90 stopinjah: okroglo 280 mm Območje reza pri 90 stopinjah: kvadratno 260 mm Območje reza pri 90 stopinjah: ploščato 330x260 mm Območje reza pri 45 stopinjah: okroglo 260 mm Območje reza pri 45 stopinjah: kvadratno 250 mm Območje reza pri 45 stopinjah: ploščato 270x200 mm Območje reza pri 60 stopinjah: okroglo 180 mm Območje reza pri 60 stopinjah: kvadratno 170 mm Območje reza pri 60 stopinjah: ploščato 170x170 mm Skupna potrebna moč 2,2 kW Primež 340 mm Teža 1240 kg Gedpfeyvvmljx Aa Uoiu Dimenzije 2020x2040x1740 mm Dodatna oprema: - Valjčna proga 2.000 mm

Stanje: dober (rabljeno), Leto izdelave: 2014, Območje reza 300 mm Območje reza pri 90 stopinjah: ploščato 330 x 260 mm Območje reza pri 90 stopinjah: kvadrat 260 x 260 mm Območje reza pri 45 stopinjah: okroglo 260 mm Območje reza pri 45 stopinjah: ploščato 270 x 200 mm Območje reza pri 45 stopinjah: kvadrat 250 mm Območje reza pri 60 stopinjah: okroglo 180 mm Območje reza pri 60 stopinjah: ploščato 170 x 170 mm Območje reza pri 60 stopinjah: kvadrat 180 mm Samodejni pomik 9999,9 mm Minimalni pomik 2,0 mm Minimalni premer reza 5,0 mm Hitrost tračnega lista 15–100 m/min Primež – odprtina 340 mm Dimenzije tračnega lista 3650 x 27 x 0,9 mm Upravljanje MEP CNC Skupna priključna moč 2,2 kW Teža 1240 kg Dimenzije D-Š-V 1800 x 1900 x 1750 mm v dobrem stanju (!!) trenutna nova cena cca. 23.000 € posebna cena na zahtevo Oprema: - robusten elektro-hidravlični avtomatski tračni žagalni stroj (INDUSTRIJSKI) - dodatna polavtomatska funkcija za reze od 0° do 60° levo - MEP 50 krmiljenje na osnovi sistema WINDOWS „CE“ s 7” zaslonom na dotik * enostavno in hitro nastavljanje vseh parametrov stroja * dodatne mehke tipke + osvetljen zaslon * 10 programov, vsak z maksimalno 9999 kosov in najv. dolžino 9999,9 mm - napredovanje materiala s koračnim motorjem prek krogličnega vretena * posamezni hod 600 mm, ponovljiv za poljubno dolžino reza * natančnost ± 0,1/600 mm - podajalnik z zaščitnim pokrovom in varnostno končno stikalo - natančna nastavitev hitrosti podajanja reza z navedbo v mm/min - pozicioniranje žagalne glave in premikanje podajalnika preko joysticka - samodejno prepoznavanje začetka reza - Velika, nastavljiva vodilna kolesa iz litega jekla - Napetost tračnega lista z nadzorom napetosti in prikazom na zaslonu Gijdpfx Aszc Rv Hja Usu - Vodiči tračnega lista iz karbida za najvišjo natančnost reza - Samodejni nadzor obremenitve med rezom - Primež s hitro nastavitvijo * z zamenljivimi prijemnimi in naslonskimi čeljustmi - Velik, stransko izvlečen zbiralnik ostružkov in rezervoar za hladilno tekočino * opremljen z 2 električnima črpalkama za mazanje in hlajenje tračnega lista * pištola za hladilno tekočino za čiščenje stroja - Krtača za odstranjevanje ostružkov iz tračnega lista - Navodila za uporabo v nemščini Podatek proizvajalca: Pri priključitvi tega stroja v omrežje z RCD zaščito (FI-sklopka) mora biti ta občutljiva na vse vrste toka (allstrom-senzitivna) in ne manjša od 300 mA.

Stanje: delavnici obnovljeno (rabljeno), Rabljena polavtomatska tračna žaga MEP Shark 281 sxi evo Giodjyyn Sujpfx Aa Uou Trije načini delovanja: Polavtomatsko, ročno in ročno dinamično (gravitacijsko) Dimenzije žaginega lista: 2950 x 27 x 0,9 mm Dve hitrosti rezila: 36/72 m/min Max odptje primeža: 285mm Kapaciteta reza: pri 0° okroglo 250mm, pravokotnik 280x200mm pri 45°okroglo 190mm, pravokotnik 180x180mm Pri 60° okroglo 120mm, pravokotnik 110x110mm Letnik 2006 Teža:435Kg V celoti servisirana.

Stanje: novo, Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 250 mm Cutting capacity at 90°: flat 380x250 mm Cutting capacity at 45° left: round 260 mm Cutting capacity at 45° left: square 250 mm Cutting capacity at 45° left: flat 300x200 mm Cutting capacity at 60° left: round 180 mm Cutting capacity at 60° left: square 170 mm Cutting capacity at 60° left: flat 200x170 mm Cutting capacity at 45° right: round 240 mm Cutting capacity at 45° right: square 210 mm Cutting capacity at 45° right: flat 280x160 mm Saw blade dimensions 3770x27x0.9 mm Vice opening 385 mm Blade speed 40/80 m/min Total power 1.5/1.8 kW Weight 695 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic dynamic and manual functions. Equipped with MEP-30 control for mitre cuts from 45° right up to 60° left. The MEP 30 is the latest generation controller. Semi-automatic function: - Vice closes and motor starts - Saw head descends for cutting - Motor switches off - Saw head lifts - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via push-button - Upper position is automatically stored Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with next-generation micro-controller - Electrical system centralised in the main control cabinet - Alarms, diagnostics and machine function display (cutting time, number of pieces cut, saw band motor load, saw head position, band speed, band tension) - Manual/semi-automatic/dynamic operation as standard Additional features: - Low-voltage control panel: polyester membrane keypad with thermoformed, raised buttons and confirmation control signal - Manual 24 V cycle selector handle, IP55 Giedpfxsyv Ntre Aa Usu - Complete program with all special cutting cycles - New low-energy hydraulic control unit. Stand-by operation - 420 mm turntable mounted on roller bearings with preloaded thrust bearing, equipped with replaceable steel worktable - Saw bow stroke can be programmed directly from the control panel for adapting to the workpiece material - Clamping device laterally adjustable left and right, with quick-release vice - Manual blade tension control with on-screen display via electronic transducer

Stanje: novo, Bandsaw blade dimensions: 4640x34x1.1 mm 2 speeds: 15-100 m/min Vice opening: 515 mm Cutting capacity at 90°: square 320 mm Cutting capacity at 90°: round 330 mm Cutting capacity at 90°: flat 510x320 mm Cutting capacity at 45° left: round 320 mm Cutting capacity at 45° left: square 320 mm Cutting capacity at 45° left: flat 350x320 mm Cutting capacity at 60° left: round 230 mm Giodpfeyv Nkkjx Aa Ueu Cutting capacity at 60° left: square 230 mm Cutting capacity at 60° left: flat 230x310 mm Cutting capacity at 45° right: round 320 mm Cutting capacity at 45° right: square 320 mm Cutting capacity at 45° right: flat 380x320 mm Cutting capacity at 60° right: round 250 mm Cutting capacity at 60° right: square 250 mm Cutting capacity at 60° right: flat 250x320 mm Total power requirement: 4 kW Weight: 1,190 kg Machine dimensions: 2000x1200x1800 mm Electrohydraulic, semi-automatic bandsaw with MEP 30 control for miter cuts from 0° to 60° left. MEP 30 represents the latest generation of control systems. Semi-automatic operation: - Vice closes and motor starts - Saw head descends to perform the cut - Motor stops - Saw head rises – vice opens Key features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic control of the machine with new generation microcontroller - Electrical system centralized in main control cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, bandsaw motor load, saw head position, blade speed, blade tension)

Stanje: novo, 2 hitrosti 36/72 m/min Vpenjalna širina primeža 285 mm Območje reza pri 90 stopinjah: okroglo 250 mm Območje reza pri 90 stopinjah: kvadratno 230 mm Območje reza pri 90 stopinjah: ploščato 280x200 mm Območje reza pri 45 stopinjah: okroglo 190 mm Območje reza pri 45 stopinjah: kvadratno 180 mm Območje reza pri 45 stopinjah: ploščato 180x180 mm Območje reza pri 60 stopinjah: okroglo 120 mm Območje reza pri 60 stopinjah: kvadratno 110 mm Območje reza pri 60 stopinjah: ploščato 110x110 mm Dimenzije žaginega traku 2950 x 27 x 0,9 mm Moč 1,5 / 1,8 kW Teža 435 kg Dimenzije 1700x1000x1840 mm Gijdpfeyv Nfuex Aa Uou Polavtomatska funkcija: - Primež se zapre in motor se zažene - Glava žage se za rez spusti - Motor se izklopi - Glava žage se dvigne – primež se odpre

Stanje: novo, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 350 mm Saw band dimensions 4640x34x1.1 mm Vise opening 355 mm Saw band speed 15-115 m/min Machine weight approx. 2800 kg Space requirement approx. 3050x2190x2200 mm Shark 350 NC HS 5.0, automatic hydraulic band saw in dual-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Powered chip conveyor, installable on either side of the machine (left or right). + Adjustable clamping pressure for the vices. + Infeed carriage with vertical rollers for lateral material support. - Numerically controlled band saw, can also be operated semi-automatically, equipped with the new MEP 50 control, specifically developed by MEP for automatic machines, based on Windows "CE". - 'Clean cut' cycle: The infeed moves the workpiece backward to avoid scoring on the cut surface when the band rises at the end of the cut. - Fieldbus communication system with dual microprocessor and serial connection. - User interface with 7” touch screen display and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use with real-time monitoring of all cutting parameters. - Automatic detection of the cutting start position. - CNC machine for storing up to 100 cutting programs with various batch quantities and cutting lengths; up to 100 of these can be selected as a sequence. - Heavy-duty cast iron construction to absorb vibrations, ensuring stable cutting accuracy and a long service life for the saw blade. Godpfxoyv Nd Rj Aa Usiu - Hydraulic feed of the saw bow on linear guides with preloaded ball bearing rails. - Hydraulic control unit for opening/closing of feed and front vices. - Infinitely variable saw band speed adjustment from 15 to 110 m/min via vector inverter. - Material feed with stepper motor and ball screw mounted on opposing bearings, 600 mm stroke, repeatable for any length. - Max. remnant piece length 120 mm plus cutting length (OPTIONAL: feeder jaws to minimize remnant to 25 mm plus cutting length). - Cut path monitoring (OPTIONAL) - Material feeder with self-aligning feed vice to handle slightly bent material. - Saw drive wheel is secured by a taper bush for optimal and adjustable axial fixing. - Management software for monitoring/evaluation/correction in real time of the following parameters: - Cutting force - Cutting torque and saw band tension compared to set values - Adjustable saw band guide heads made of steel with combined roller and carbide guides, including control valves for conventional recirculating lubrication. - Prepared for installation of OPTIONAL minimum quantity lubrication system. - Adjustment of the saw band drive wheel for saw blade replacement directly from the operator panel. - Automatic adjustment of the front saw band guide head to material size. - Machine...