Tračna žaga

MEP SHARK 332-1 NC 5.0

Saw blade dimensions: 3650 x 27 x 0.9 mm
Cutting speed: 15 - 100 m/min
Vice width: 335 mm
Cutting capacity at 90° (round): 300 mm
Cutting capacity at 90° (square): 260 mm
Cutting capacity at 90° (flat): 330 x 260 mm
Cutting capacity at 45° (round): 260 / 200 mm
Cutting capacity at 45° (square): 250 / 180 mm
Cutting capacity at 45° (flat): 270 x 200 / 200 x 160 mm
Cutting capacity at 60° (round): 180 mm
Cutting capacity at 60° (square): 170 mm
Cutting capacity at 60° (flat): 170 x 170 mm
Total power requirement: 2.2 kW
Weight: 1,105 kg
Dimensions: 2700 x 2300 x 1800 mm

Electro-hydraulic, fully automatic bandsaw with multi-microprocessor control, featuring additional semi-automatic, semi-automatic dynamic, and manual operating modes.

- Automatic cycle (cuts from 0° to 60° left). CNC automatic machine with two controlled axes, allowing programming of 1000 different cutting programs—each with its own cut length and quantity—using the same material thickness.
- Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left)
- Semi-automatic dynamic system (manual downfeed of the saw bow to the desired position, with cycle start via hand button)
- Manual or semi-automatic dynamic cycle for direct cuts without programming.

Key features:

- New fieldbus communication system (Modbus protocol)
Itjdpfsyv Nyljx Adkod
- Display, 20 characters x 4 lines, showing technical parameters such as:
- Saw blade speed
- Number of programmed and completed cuts
- Saw blade thickness
- Feed length
- Cutting time
- Ammeter
- Blade tension
- Display of up to 100 diagnostic messages and warnings, all in the respective user language.
- Display and logging of alarm and error messages with incident history display feature.
- Automatic parameter adjustment via control system when a new driver or inverter is installed.
- Electronic inverter for continuous regulation of blade speed from 15 to 100 m/min.
- Latest-generation hydraulic control unit, highly efficient and low in energy consumption.
- New 600 mm material feed system with stepper motor and ball screw mounted on opposed bearings.
- Programmable saw bow stroke from control panel for adaptation to the material being cut.
- Electronic blade tension monitoring.
- Automatic cutting load monitoring via a servo valve mounted directly on the cylinder.
- Coolant tray (with two electric pumps for blade lubrication/cooling) integrated in the machine base.
- Chip drawer (can be replaced by a swarf conveyor – see optional accessories)
- Prepared for installation of a minimum lubrication system for the saw blade (optional), in addition to standard emulsified oil lubrication.
- Chip removal brush.
- Machine designed for pallet truck transport.
- Bi-metal bandsaw blade for solid and profile material.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.