Mammut 200 Liter Druck-Sandstrahlgerät Mit Quick-Stop Sicherheitsabschaltung nakup rabljenega (40.090)

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff Crodswc Rk Ejpfx Aahjg - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter Codswc Ri Ijpfx Aahsrg - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Stanje: novo, Our SAPI pressure blasting unit, type 'Mammut', with a 60-litre vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. A water separator is also permanently installed on the blasting unit; this removes moisture from the compressed air and prevents the blast media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This initiates and stops the blasting process by actuating the hand lever mounted on the blast hose. The scope of delivery includes: - SAPI pressure blasting unit 'Mammut 60 L' - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off Technical data - Pressure Blasting Unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed piping 1" internal and external - Rubber-coated metal nozzle with rubber seal - Large maintenance opening - Chassis with rubber wheels - Media dosing valve (suitable for all common blasting media) - Tank capacity 60 l - Total height 1,130 mm - Tank diameter 360 mm - Overall diameter 700 mm - Weight approx. 60 kg Codpfx Aaewc Afhshorg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest on/off times, fully compliant with occupational safety guidelines (VBG 48) - The pressure setting can be precisely adjusted prior to operation: continuously adjustable from 0.1 to 12.0 bar - Reduced abrasive consumption as the pressure vessel remains under pressure, preventing unnecessary discharge of media - Upon restarting, full blast pressure is immediately available at the nozzle, eliminating build-up time—thus, significant reduction in both media consumption and wear on the blast hose - No moisture (condensate) forms inside the vessel, as it remains pressurised at all times and is not vented with each start/stop. Additional benefits include: - Optimum media dosing via hardened precision valve - Lower compressed air requirement, significantly reducing fuel (diesel) consumption - One-person operation, as vessel pressure is constantly indicated and can be adjusted via the pressure gauge without needing to start the device first - No sensitive components such as control valves, membranes or gaskets—resulting in low maintenance and reliable operation. Only the blast hose within the safety shut-off needs to be checked and replaced if necessary.

Stanje: novo, SAPI Mammut peskalni stroj s sistemom QUICK STOP™ Industrijski peskalni stroj SAPI Mammut s sistemom QUICK STOP™ je zmogljiva naprava za peskanje, ki se uporablja v industrijah, kot so avtomobilska, gradbena in proizvodna. Namenjen je hitri in učinkoviti pripravi površin, čiščenju in obdelavi kovine, betona in drugih materialov. Cedpfsupyw Eex Aaherg QUICK STOP™ – Varnost in Zaščita QUICK STOP™ je varnostna funkcija, ki preprečuje nesreče in ščiti napravo pred poškodbami. Takoj ustavi peskanje takoj, ko operater spusti krmilni ročaj, s čimer preprečuje nevarnosti in prekomerno obrabo opreme. Učinkovitost in Vzdržljivost Sistem QUICK STOP™ zmanjšuje porabo zraka in energije, zaradi česar je peskanje bolj ekonomično in učinkovito. Peskalni stroj Mammut je izdelan iz visokokakovostnih komponent, ki zagotavljajo zanesljivo delovanje tudi v težkih razmerah. Vsi naši stroji so CE in TÜV certificirani. Fleksibilnost in Vsestranskost Na voljo v različnih velikostih, da ustreza različnim potrebam peskanja. Združljiv je z več vrstami abrazivov, od standardnega peska do plastičnih in kovinskih granulatov. Mammut s sistemom QUICK STOP™ je idealen za pripravo površin, čiščenje in odstranjevanje rje, barve in premazov. Natančnost in Enostavna Uporaba Mammut s sistemom QUICK STOP™ omogoča natančno nastavitev tlaka med delovanjem, kar zagotavlja dosledne rezultate in visoko natančnost. Opremljen je tudi z lahko dostopnimi točkami za pregled in vzdrževanje. Maksimalna Varnost Sistem QUICK STOP™ z varnostnim stikalom zagotavlja najvišjo varnost pri uporabi. Prav tako preprečuje nabiranje vlage v stroju, saj ohranja konstanten tlak tudi po zaustavitvi peskanja, kar ni mogoče pri običajnih vklop/izklop sistemih. Popolna Oprema Vsi Mammut peskalni stroji s sistemom QUICK STOP™ so popolnoma opremljeni in vključujejo: ✔ Peskalno cev ✔ Šobo za peskanje ✔ Regulator tlaka ✔ Ločevalnik vode ✔ Dozirni ventil za abraziv ✔ Osnovno osebno zaščitno opremo

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Mixer grinder / meat mincer Kolbe MWE-32 In good used and fully functional condition. Csdpfewcgr Eex Aaherg Belts and motor are new. The unit runs on 400 volts, is constructed entirely of stainless steel, includes a mixing paddle, 98 cm Enterprise system, workshop tested, ready for immediate use. Feeding device FD 200, year of manufacture 2009. The machine itself is from 2007. Further details available upon request. Payment by cash or advance bank transfer. Sale only to commercial customers. No warranty or guarantee.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm Crodpfx Asykuh Njahog 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna širina: 90 mm, skupna dolžina: 136 mm, skupna masa: 200 kg, vhodna napetost: 400 V, Oprema: žerjav, Naprodaj je Speidel Braumeister 200, pivovarska naprava, v odličnem stanju. Naprava je bila rabljena, vendar je tehnično in vizualno zelo dobro ohranjena ter bila vedno skrbno vzdrževana. Cedpjzwn U Uefx Aahjrg Podrobnosti: • Speidel Braumeister 200 • Rabljen, a v odličnem stanju • Idealno za ambiciozne pivovarje ljubitelje in manjše komercialne pivovarne • Lokacija: Italija Če ste zainteresirani ali potrebujete več informacij, mi prosim pošljite sporočilo. Na voljo je tudi dodatna oprema.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication and emergency-stop interface); • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Cjdpey Hmfyefx Aahjrg Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Stroj za vrtanje dolgih lukenj in lukenj za vijake HOFFMANN HT 200 v zelo dobrem stanju, stroj je iz izobraževalne ustanove, malo rabljen in v popolnoma novem stanju, ima le nekaj znakov uporabe. Omogoča frezanje dolgih lukenj in vrtanje lukenj za vijake, višina vrtanja je natančno odčitljiva na digitalnem številčniku. Opremljen s 3 vpenjalnimi napravami za svedre: za svedre z navojem M10 in za svedre s premerom 12 mm in 16 mm. Z dodatnimi oporami za obdelovance na levi in desni strani, ki se lahko nagibajo in imajo podporno valjčno ležajno enoto. Stroj ima podvozje. Z 2 omejevalnima vodiloma na mizni plošči stroja za levo in desno stran. Vpenjalne roke so zamenljive in pomične. 380 V, 1400 in 1800 W, zahvaljujoč 2 območjem hitrosti vrtenja. 1400 in 2850 vrt/min. Letnik izdelave: 1994. Teža: približno 280 kg. S tem strojem lahko frezate dolge luknje za npr. ohišja ključavnic in podobno ali izdelujete različne vrste povezav z vijaki v okvirjih, pod pravim kotom, čelno in pod kotom. Idealno za izdelavo povezav z vijaki v leseni konstrukciji, pri izdelavi pohištva, vrat, oken in stopnic, ter za podobne namene. Vrtalna enota je na obeh straneh nagibna do 65° in ima pri 0° raster, zaradi česar je mogoče z uporabo stroja zelo dobro vrtati tudi ograjne drogove v stranske dele stopnic. Zahvaljujoč 2 območjem hitrosti vrtenja je mogoče uporabljati tudi svedre z velikim premerom, ne da bi se pri vrtanju pregreli. Zahvaljujoč rasterju in omejevalnikom ter konstrukciji stroja je mogoče v najkrajšem času izdelati povezave z vijaki, kar naredi stroj zelo ekonomičen. Stroj potrebuje priključitev na stisnjeni zrak pri 6 bar (poraba zraka je zelo nizka). Crjdpsyy Rtzsfx Aahsg Desnosmerno vrtenje. Zelo dobro in natančno freza in vrti. Napetost obdelovanca se izvaja z 2 pnevmatičnimi vpenjalnimi cilindri s pomočjo nožnega pedala. Z linearnim laserjem na vrhu stroja je mogoče zelo hitro in natančno vrtati predhodno označene luknje za vijake in različne naklone. Z natančno 12-mm raster tirnico, ki ima središčni raster in 13 rasterjev na levi in desni strani. Delovna pot v širino: maks. 330 mm. Maksimalna višina luknje: 90 mm. Maksimalna globina luknje: 200 mm z omejevalnikom. Maksimalna višina obdelovanca: 150 mm. Vse deluje brezhibno. Priložena navodila. Stroj vam osebno dostavimo in predstavimo po celi Nemčiji za 220,00 EUR, s čimer se izognete tveganju ob nakupu, dostava v Avstrijo in druge države je možna po dogovoru. Mizna plošča stroja je široka 1100 mm in globoka 250 mm. Profesionalna oprema, ne gre za poceni izdelek iz trgovine za orodje. S tem strojem lahko takoj začnete delati. Zelo stabilna in dolgotrajna konstrukcija. Natančne vodilne tirnice s krogličnimi ležaji brez zraka so v redu in se gladko premikajo, mehanizem nagiba je prav tako zelo gladko gibljiv, fiksacija pa je možna s fiksirnim vijakom.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja višina reza: 200 mm, premer žaginega lista: 520 mm, vrtljajska hitrost (min.): 2.800 obr/min, dolžina rezanja (maks.): 420 mm, višina obdelovanca (maks.): 200 mm, dolžina podajanja os X: 420 mm, dolžinski omejevalnik: 8.800 mm, pritisk: 5 letvica, zahteva za prostor dolžina: 8.800 mm, potrebna širina: 1.200 mm, Oprema: dvostranski, Mobile saw frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 to 5960 mm, with digital LED length display, measuring length including extension approx. 8800 mm. Credpfev Hhg Tex Aaheg Saw frame with 6 crank supports ensures stable standing during work. Equipped with electric power distribution and triple 230 V socket outlet. Mobile saw frame Beck ESF 1, ZS 200 saw mounted on the frame.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Codpoykub Asfx Aahsrg Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Stanje: zelo dobro (rabljeno), Buderus GE315/200 kW low-temperature boiler with oil burner Codpfx Aaowauarohjrg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 225 mm, pomik po osi Z: 535 mm, skupna masa: 4.380 kg, število osi: 2, Horizontalni stružni stroj, leto proizvodnje 2007. Ta CNC-stružni stroj tipa Mazak QuickTurn Nexus 200 ima vreteno s premerom 80 mm in je opremljen s podajalnikom palic, vpenjalno glavo in matričnim upravljalnikom. Stroj tehta 4.380 kg in je na voljo s kompletom orodij. Če iščete visokokakovostne možnosti struženja, razmislite o modelu Mazak QuickTurn Nexus 200, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Premer vretena: 80 mm • Končni nastavek: Brez končnega nastavka Dodatna oprema • Podajalnik palic Cjdpfx Aszyub Heaherg • Vpenjalna glava • Orodja (ni specificirano) Tehnične specifikacije Proti-vreteno: Ne Pogonska orodja: Ne

Stanje: rabljeno, Profesionalna merilna plošča iz granita – priznana kakovost Mitutoyo / Planolith (izdelano v Nemčiji). Idealna za uporabo pri kontroli kakovosti, v orodjarni in metrologiji. ⸻ Parametri: • Dimenzije plošče: pribl. 1200 x 800 mm • Debelina: pribl. 170 mm • Teža: pribl. 460 kg • Razred natančnosti: DIN 876/0 (visoka natančnost) • Dovoljeno odstopanje: 0,009 mm • Dejansko odstopanje: 0,00273 mm • Proizvajalec: Planolith GmbH / Mitutoyo • Država izdelave: Nemčija • V kompletu: masivno jekleno stojalo ⸻ Prednosti: Zelo visoka merilna natančnost Stabilna konstrukcija – težek granit duši vibracije Idealna za meritve, risanje, kontrolo detajlov Profesionalna oprema Pripravljena za uporabo ⸻ Stanje: Rabljeno – z običajnimi sledovi uporabe (vidne praske na površini), vendar popolnoma funkcionalna in ohranja vse uporabne lastnosti. Crsdpfxeyw Ubqo Aaheg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, GLAVNE INFORMACIJE Kapaciteta in območje delovanja • Model: Mazak Quick Turn Smart 200 • Nadzor: Mazatrol Smart • Letnik: 2013 • Serijska številka: 249187 • Skupni čas delovanja: 11.755 ur • Čas obdelave: 1.561 ur • Omrežje: LAN povezava • Stanje: Stroj je v odličnem tehničnem stanju, čist, natančen in zelo dobro vzdrževan. • Največji premer obdelovanca: 530 mm • Največji premer obdelovanca nad prečno mizo: 343 mm • Kapaciteta palice: 65 mm • Premer vretena: 76 mm • Gib osi: Osi X: 195 mm Osi Z: 560 mm • Hitrost gibanja: Osi X: 30.000 mm/min Osi Z: 33.000 mm/min Vreteno in orodja • Hitrost vretena: 5.000 vrt/min • Moč vretena: 15 kW • Izbiren začetni položaj navoja • Hladilno sredstvo skozi orodje • Revolver za orodja: 12 položajev Čas indeksiranja: 0,17 sekunde/1 korak • Podpirače: MT5, avtomatsko • Merilna roka za orodja: Da • Zbirnik za odrezke: Da • Vmesnik za robota: Dodatna funkcija M (1 par) • Sistem za hitro menjavo Smartshift BASE: Da • Vpenjalna glava: SMW AUTOBLOK Avtomatizacija in dodatna oprema Integrirana rešitev za avtomatizacijo z UR5e • Model: Universal Robots UR5e (samo za demonstracijne namene) • Tip: Kolaborativni robot (cobot) • Letnik: 2021/01 • Stanje: Popolnoma integriran in operativen s strojem Mazak Smart 200 • Nosilnost: 5 kg • Doseg: 850 mm • Ponovljivost: ± 0,03 mm • Delovno območje: 2,6 m³ • Največja hitrost TCP: 1.000 mm/s • Hitrost sklepa: 180 °/s Credpszwhc Ejfx Aahsg • Teža robota: 21 kg • Montaža: Na tleh, stropu, steni ali pod naklonom • Napajanje: 100–240 V AC, približno 200 W • Krmilnik: Nadzorna enota UR (serija e) • Programiranje: URScript + grafično programiranje blokov • Varnost: ISO 10218-1, ISO/TS 15066, PLd Cat. 3 • Poljska avtobusna mreža: PROFINET, EtherNet/IP, Modbus TCP • Digitalni I/O: 16 vhodov / 16 izhodov • Analogni I/O: 2 vhoda / 2 izhodi • Priključna plošča za orodje: ISO 9409-1-50-4-M6 Integracija s Smart 200 • Sistem za hitro menjavo Smartshift BASE • Dodatna funkcija M (vmesnik za robota) • Predprogramirani programi • Hitra menjava med ročnim in robotskim delovanjem • Na voljo je video posnetek, ki prikazuje robota in stroj v delovanju • Popolnoma preizkušen in uporabljen v proizvodnji Opis stanja • Stroj je v celoti operativen in deluje, kot je predvideno. • Brez alarmov ali kritičnih napak. • Gladko gibanje na vseh osi. • Vreteno se vrti gladko, brez vibracij. • Linearne vodila in kroglični vijaki so v dobrem stanju. • Hidravlični in pnevmatski sistemi delujejo normalno. • Redno notranje vzdrževanje. • Sistem za mazanje je v redu. • Stroj je bil uporabljen za lažjo proizvodnjo (aluminij/plastika). • Robot in stroj sta popolnoma integrirana in preizkušena.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 350 mm, širina brušenja: 160 mm, vrsta vhodnega toka: trifazni, skupna masa: 740 kg, največja hitrost vrtenja: 2.900 obr/min, moč: 1 kW (1,36 KM), vhodna napetost: 200 V, premer diska: 250 mm, Oprema: dokumentacija / priročnik, Manufacturer: Mitsui MGG CO.LTD Model: MSG-200M Year of manufacture: 1991-4 Maximum grinding width: 160 mm Maximum grinding length: 350 mm Maximum table longitudinal travel: 360 mm Maximum table cross travel: 200 mm Table travel per handwheel revolution: 3 mm/rev Grinding spindle speed: 2,900 rpm, 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Crsdpfswvf Hbox Aahog Grinding wheel speed: 2,900 rpm, 50 Hz Grinding wheel bore diameter: 31.75 mm Electric power: 2 HP, 1 kW, 4P, 200 V, 3-phase Weight: approx. 740 kg

Stanje: rabljeno, Pressure blower with rotary airlock valve, fan for material conveying, Type: TZK 150 Condition: 2 units available – 1 unused, 1 used for testing purposes Application: Suitable for free-flowing bulk material, e.g. PET flakes, rigid plastic regrind, grain, etc. Machine specifications: Crsdpjzy E Uksfx Aahsg Blower drive power: 11 kW Rotary valve drive power: approx. 0.75 kW Approximate conveying capacity in t/h for dry materials such as rigid plastic or wheat, at 6 m conveying height and three 90° conveying bends (non-binding, as specified by the manufacturer): At 15 m conveying distance approx. 21.00 t/h, at 50 m approx. 13.90 t/h, and at 100 m approx. 9.40 t/h. Without electrical control cabinet. The cast-iron rotary airlock is mounted directly and vertically above the conveying pipeline. To protect the conveyed material, the rotary valve is equipped with additional rubber edges on the rotor. A large feed hopper with a low filling height allows for easy loading from two sides. Frequent areas of application include silo truck or flat storage loading, truck loading, or mobile transfer of grain.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 3.000 h, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area: 3000 x 1500 mm High-pressure pump Ecotron 40.37, year 2013 Water softening unit, year 2018 --> as new Abrasive backflushing system, year 2013 ABUS pillar jib crane, 2t, year 2018 --> as new Devo-Tech vacuum lifting system, load capacity 1800 kg --> as new Various accessories, several sandbags The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet unit and pump were completely overhauled by the supplier at the time. Unfortunately, the cutting unit has seen very little use in our facility. It was only operated for a few hours per year. It has not been used since around July 2025. The high-pressure pump has a defect. It is not sealing properly and is leaking water. Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, pump repair would cost approx. CHF 5,000.– to 6,000.–. The crane and vacuum lifting system can also be purchased separately. Please submit your offer with price expectations. The original new price for the crane and vacuum unit in 2019 was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please send inquiries or offers by email only, not by phone. Crsdpfx Ajyq Rdyoahsg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vrtalno-frezalni stroj s vrtljivo vreteno KÖLLE F 45 v zelo dobrem stanju, stroj prihaja iz montažne firme in je zadnja leta samo stal, ni bil več v uporabi. vse deluje brezhibno. vse ležaje in vodila so v redu, stroj deluje zelo gladko. Letnik: 1990 z nadzorno ploščo na vrhu. na frezalni vodili je mogoče nastaviti obe vodilni čeljusti v globino, z fino nastavitevjo in skalo, zato je mogoče izvajati tudi obdelave, npr. pri lepilnem profilu. Celotno frezalno vodilo je mogoče nastavljati tudi v globino s pomočjo nastavitvenega kolesa in navojnega vretena, kar omogoča zelo natančne in hitre nastavitve. z AIGNER integriranim vodilom. z blokado vretena s pomočjo ročice. lesni odpadki se lahko zelo dobro odstranijo, z 2 sesalnim priključkom, 125 mm na frezalnem vodilu in 100 mm na strojni mizi. z 30 mm vretenom, ki je brezstopenjsko nastavljivo od -5 do 45°, vreteno se nagiba električno z zelo natančnim prikazom, fina nastavitev se lahko izvede ročno s pomočjo ročnega kolesa. nastavitev višine se izvaja tudi električno in za fino nastavitev je na voljo tudi ročno kolo. z desnim/levim vrtenjem. stroj vam osebno dostavimo in prikažemo po vsej Nemčiji za 220,00 evrov, zato ob nakupu nimate tveganja. Dostava v Avstrijo in ostalo EU je na zahtevo možna. z veliko odprtino mize 375 mm, ki jo je mogoče zmanjšati z različnimi obroči (zato je mogoče uporabljati tudi frezerje z zelo velikim premerom in varno frezati tudi z majhnimi frezerji). z 3000, 4000, 5000, 6000, 8000 in 10000 vrt/min. Crjdpszt Ai Esfx Aahog miza je izdelana iz masivnega sivega litega železa z rebra. v stroju je nameščeno 30 mm vreteno, možno je namestiti tudi drugo vreteno. zelo robustna in dolgotrajna izvedba, stroj je bil izdelan za najtežja frezalna dela, primeren je za vsa frezalna dela. optimalen prenos moči s pomočjo klinastega jermenskega pogona. z navodilom za uporabo. z 3-valjnim podajalnikom HOL HER, tip ET 117. podajalnik ima desni/levi pogon in 8 hitrosti, podajalne valje so ločeno nameščeni in vsi so skoraj novi. strojna miza je 1000 mm globoka in 1200 mm široka, ima izvlečno dodatno oporo, dolžine 1200 mm. z strojem je mogoče takoj začeti delati. 380V, 4700 in 5700W, odvisno od 2 hitrosti. z vsemi potrebnimi varnostnimi napravami, zavoro motorja in varnostnim stikalom, stroj je odobren s strani Holz-BG, ima znak GS. teža stroja je približno 1000 kg. z varovalnim stikalom motorja proti preobremenitvi. profesionalna oprema, ne navaden "šrot" iz trgovine. optimalno, enostavno, hitro in varno upravljanje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 8.794 h, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 230 mm, pomik po osi Z: 575 mm, skupna masa: 4.380 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: Matrix NEXUS, število osi: 2, Horizontalni stružni stroj, letnik 2007. Ta Mazak QUICK TURN NEXUS 200-II omogoča maksimalni premer struženja Ø 350 mm in dolžino struženja 550 mm. Opremljen je z vpenjalno glavo premera 200 mm in največjo hitrostjo vretena 5.000 vrt/min. Če iščete kakovostne stružne kapacitete, priporočamo, da razmislite o Mazak QUICK TURN NEXUS 200-II, ki je naprodaj pri nas. Za dodatne informacije nas kontaktirajte. • Krmilje: Mazatrol Matrix NEXUS • Velikost vpenjalne glave: 200 mm (8") • Največji premer struženja: Ø 350 mm Crjdpjzg Dz Asfx Aaheg • Največja dolžina struženja: 550 mm • Teža stroja: 4.380 kg • Držalo za orodje (toolsetter): Da • Hladilni sistem: Trenutno ne deluje (hladilna tekočina/voda ni mogoče dopolniti) • Dodatna opcijska oprema: transporter za odrezke, vključene različne vpenjalne čeljusti • Delovni čas: 24.079 h • Delovni čas vretena: 8.794 h Tehnični podatki Protiprvotno vreteno: Da Pogonska orodja: Ne

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 225 mm, pomik po osi Z: 605 mm, skupna masa: 4.950 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: Smooth C, število osi: 2, Tour parallèle horizontale de 2018. Ce tour Mazak QUICK TURN 200MA L offre un diamètre maximal de pièce de Ø 360 mm et une longueur maximale de pièce de 535 mm. Il est équipé d'une vitesse de broche de 5 000 tr/min et d'une tourelle VDI à 12 positions. Si vous recherchez des capacités d'usinage de tournage de haute qualité, considérez la machine Mazak QUICK TURN 200MA L que nous proposons à la vente. Contactez-nous pour plus de détails. • Diamètre max. de la pièce : Ø 360 mm • Longueur max. de la pièce : 535 mm • Capacité max. de barre : Ø 65 mm • Nez de broche : A2-6 Crjdpfeyuyh Aox Aahsg • Alésage de broche : Ø 76 mm • Stations de tourelle : 12 positions VDI Équipement supplémentaire • Extraction de copeaux Spécifications techniques Contre-broche : Oui Outils entraînés : Oui

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cc Clamping unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable delivery hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Additional oil filtration pump Cedpfxjzy In Tj Aahjrg Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes electrically driven with servomotors: X, Y, Z, B; C axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50 x 2.20 x 2.30 m All machines offered are put into operation by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Operating pressure: 12 bar Tank volume: 200 l Crsdsvvvrpepfx Aahjg Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sand blasting unit Pressure of blast vessel up to 12 bar Test pressure: 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Tungsten carbide blasting nozzle Including 10 m nozzle hose (internal diameter)

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Description: RAPID DGL 200 M Double Mitre Saw Working length: 5,100 mm Working height: 160 mm Tiltable: yes Aluminium spray unit: available Short length stop: available Socket for external extraction: available Vertical clamping device: available Moving roller conveyor (feeding from the right) Rapid DGL 200 M Double Mitre Saw ----- With 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle adjustment for 45° and 90°. Easy Operation and Premium Quality ----- For precise and burr-free cutting of aluminium, plastic, and wooden profiles. System Features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely robust machine bed - Full coverage of guide bushings around the guide shafts of the saw heads - Hardened guide shafts - Swivel axis supported on both sides Digital Length Display: ----- Credpfx Aaetdgitshsg Ensures perfect dimensional and angular accuracy. ----- To achieve this, we use precise and efficient motion technology: Ball bushing guides for length adjustment, spring-mounted pivoting units for convenient and safe angle adjustment between 45° and 90°. Length and angle adjustment of this double-head mitre saw are carried out manually. Greater operating comfort and enhanced performance can be achieved with the digital length display and pneumatic swivel mechanism. The 500 mm saw blades enable processing of a wide range of profile systems. Technical Specifications ----- Drive: 2 x 2.2 kW three-phase motors, 400 V Swivel range: manual, 45° to 90° Saw blade: 500 mm diameter Cutting lengths: 5,100 mm Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Compressed air: 7 bar Dimensions: 5,250 x 1,420 x 1,900 mm Weight: 1,260 kg

Stanje: novo, Leto izdelave: 2025, moč: 5 kW (6,80 KM), SAPI Premium Pressure Blast Apparatus, 200 liters, with cyclone separator and abrasive vacuum for abrasive media processing. This blasting system offers a cost-effective, highly efficient, and effective solution for open blasting operations with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of various types of workpieces by an operator, including abrasive media processing. The abrasive media is collected by hand after blasting and pushed into the collection hopper at the bottom. The abrasive vacuum extracts the media from the hopper and draws it through the cyclone separator. During this process, dust is extracted and collected in the vacuum's dust container. Coarse particles are separated out via a screen. Crjdpfowc Rcnsx Aahjg The cleaned abrasive falls back into the vented pressure blasting vessel and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control enables starting and stopping of the blast vessel with a hand lever mounted on the blasting hose assembly. This is a very economical and effective solution for open blasting operations with semi-automatic abrasive recycling. Scope of delivery includes: - SAPI Premium Blast Vessel, 200 liters with 1 1/4" piping, pressure-regulated from 0.1 – 12 bar, max. operating pressure 12 bar - High-performance water separator 1 1/4", permanently mounted on the device - SAPI safety shut-off - Cyclone separator for abrasive processing with lifting device - Abrasive media sieve (insert sieve in blast vessel hopper) - Loading hopper 500x500x380 mm - 4-meter connecting hose from loading hopper to cyclone separator - 3-meter connecting hose from cyclone separator to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control cable, and blast hose coupling - Boron carbide venturi long nozzle (optional diameters: 6 mm, 8 mm, or 10 mm)