Mütek Zaposlitveni Material Briketirna Stiskalnica nakup rabljenega (18.120)

Stanje: dober (rabljeno), Used, good condition. Technically inspected second-hand machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (such as toys and chewing material for pigs), animal feed, alfalfa, or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (depending on material) (e.g., sawdust with a bulk density of 250 kg/m³) Accurate statements on throughput are only possible after testing with your material. Actual output may vary significantly depending on the bulk density of the starting material. Customs tariff number: 84793010 Briquette Ø 65 mm Including 2 m press channel Main motor power: 37 kW Feed screw geared motor: 2.2 kW Compression screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with hour counter in the switch cabinet Machine has CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3800 kg Optional extras at additional cost: Ijdpfx Aofmqq Esb Aotg Temperature control unit for press tools To maintain temperature for optimum briquette quality. Includes temperature controller for pump, cooling unit, fan, pressure switch. Pre-wired, ready to connect – mandatory for operation Including corresponding control system + €7,850 net Guillotine or tablet breaker For cutting briquettes + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. Conveyor line/cooling section (nominal: 4x2m) Each 2 meters €990 net Installation/commissioning (estimated 2-3 days onsite) Billed based on effort and separate calculation. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and travel kilometer: €0.98/km Travel and accommodation charged to client according to receipts or via flat rate. Test run with customer-specific material: (by arrangement, up to a maximum of 750 kg) – €1,970 net flat rate Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and maximum of 15% - Chip length maximum 18 mm - Installation temperature: heated room at minimum +5°C - Feed material must be free from metals and mineral contamination. Damage to the press tools and/or increased wear may result

Stanje: dober (rabljeno), Technical data: Briquetting press RUF RB 440 Pressing capacity (wood briquetting): up to max. 440 kg/h Material moisture content: max. 15% Motor power: approx. 30 kW Briquette size, rectangular: 150 x 60 mm Itodpfx Aot H D Ezjb Ajg Length: 40 – 110 mm Dimensions (approx.): 1680 x 1800 x 2000 mm Weight: 3000 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Itjdpjd N Dnhefx Ab Asg Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: rabljeno, Tehnični podatki: Premer briketa: 60 mm Dolžina briketa: 50 mm Premer rezervoarja: 900/1000 mm Višina rezervoarja: 930 mm Kapaciteta rezervoarja: 840 l Zmogljivost: 60 kg/h Napajanje: 400V Moč motorja: 7,5 kW Varnostno stikalo Itodpfx Aoy R Sp Eeb Aog Skupne mere: Dolžina: 1200 mm Širina: 1600 mm Višina: 1500 mm

Stanje: novo, Hidravlična briketirna stiskalnica FALACH 20-26-537/1 (nova) Tip 50 Premer briketa: 50 mm Kapaciteta stiskanja: 40–60 kg/uro Nastavljiva dolžina briketa: cca 35 mm Volumen zalogovnika: 0,38 m3 Moč motorja črpalke: 5,5 kW Poraba energije: 3,8 kW/uro Potrebna vhodna napetost in tok: 3x400V, 16 A Hladilnik olja: da Delovanje: neprekinjeno Samodejno obračanje podpornih koles: da Samodejni izklop: da Največja dovoljena vlažnost: 15 % Specifična masa briketov: 900 kg/m3 Maksimalna raven hrupa: 68 dB Isdsxrn R Eopfx Ab Astg Transportne dimenzije: 1860 x 890 x 1100 mm Teža: 390 kg Cena: 13.030 EUR (EXW Jonava, Litva)

Stanje: novo, 20-26-537/4 FALACH hidravlična briketirna stiskalnica (nova) Tip: CUBE 20 Premer briketa: 30 x 30 mm Kapaciteta preše: 10-25 kg/uro Dolžina briketa: pribl. 6-50 mm Volumen lijaka: 0,28 m3 Moč motorja črpalke: 2,2 kW Poraba energije: 1,1 kW/uro Potreben vhodni napetost in tok: 3x400V, 16 A Hlajenje olja: ne Delovanje: neprekinjeno Ijdpfexrn Uwox Ab Ajtg Avtomatski povratni tek podpornih koles: ne Samodejni izklop: ne Največja vsebnost vlage: 15 % Specifična gostota briketov: 900-1100 kg/m3 Največja raven hrupa: 62 dB Transportne dimenzije: 1300-740-1120 mm Teža: 233 kg Cena: 8.190 EUR (EXW Jonava, Litva)

Stanje: novo, 20-26-537 FALACH hidravlična briketirna stiskalnica (nova) Tip: Falach 35 Premer briketa: 50 mm Kapaciteta stiskanja: 25 - 40 kg/uro Dolžina briketa: cca 20-40 mm Volumen zalogovnika: 0,38 m3 Moč črpalke: 4 kW Poraba električne energije: 2,2 kW/uro Zahtevana vhodna napetost: 3x400V, 16 A Itjdpfx Aboxrn Dxe Asg Hladilnik olja: ne Obratovanje: neprekinjeno Samodejno vračanje podpornih koles: da Samodejni izklop: da Največji delež vlage: 15 % Specifična masa briketov: 900 kg/m3 Največja raven hrupa: 68 dB Transportne dimenzije: 1860 - 890 - 1100 mm Teža: 400 kg Cena: 11 160 EUR (EXW Jonava, Litva)

Stanje: novo, 20-26-537/3 FALACH hidravlična briketirna stiskalnica (nova) Tip 100 Premer briket 70 mm Kapaciteta stiskanja 90 - 120 kg/uro Približna nastavljiva dolžina briket 45 mm Volumen zalogovnika 0,75 m3 Vhodna moč črpalke 11 kW Poraba energije 8,2 kW/uro Zahtevana vhodna napetost in tok 3x400V, 32 A Hladilnik olja da Neprekinjeno delovanje Samodejni povratni tek podpornih koles da Samodejni izklop da Maksimalni delež vlage 15 % Specifična masa briket 900-1100 kg/m3 Maksimalna raven hrupa 68 dB Transportne dimenzije 2220 - 1200 – 1510 mm Teža 810 kg Itodpfx Aoxrn Ukjb Aeg Cena 26 230 Eur (EXW Jonava, Litva)

Stanje: novo, 20-26-537/2 FALACH hidravlična briketirna stiskalnica (nova) Tip 70 Premer briketa: 70 mm Kapaciteta stiskanja: 60 – 80 kg/uro Dolžina briketa cca 40 – 60 mm Volumen lijaka: 0,75 m3 Vhod moči motorja črpalke: 7,5 kW Poraba energije: 4,9 kW/uro Zahtevana vhodna napetost in tok: 3x400V, 25 A Oljni hladilnik: ne Obratovanje: neprekinjeno Samodejno vzvratno delovanje podpornih koles: da Samodejni izklop: da Itodpfx Absxrn Tgo Aog Največji delež vlage: 15 % Specifična teža briketov: 900-1100 kg/m3 Največja raven hrupa: 68 dB Transportne dimenzije: 2220 - 1200 - 1510 mm Teža: 840 kg Cena: 20 270 EUR (EXW Jonava, Litva)

Stanje: rabljeno, Leto izdelave: 2009, PRODECO BRIQUETTING PRESS MODEL L70 – CE COMPLIANT – USED - Briquette diameter: 70mm - Output: 50-120 kg/h Itjdjwrddqepfx Ab Aeg - Serial no.: 89 - Year: 2009 - Complete with manual

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, BRIKETIRANJE in PELETIRANJE – tehnologija: Tip stroja: BS70 oprema za briketiranje Stiskalnica za briketiranje tipa BS70 se lahko univerzalno uporablja za obdelavo naravno obnovljivih surovin pri proizvodnji novih, predelanih komercialnih izdelkov. Napravo se uporablja za obdelavo in stiskanje materialov, kot so slama, stročnice, seno, papir, les in drugi naravni materiali ter njihove mešanice. Itedeubb Ubjpfx Ab Ajg Proizvajalec zasnuje opremo glede na surovino, ki se bo predelovala. Vsebnost vlage obdelovanih surovin je največ 10–12 % in ne smejo vsebovati tujih snovi (kovin, kamenja, peska ipd.). Stiskanje poteka brez dodajanja dodatkov ali veziv, izključno s kompaktnim stiskanjem, kjer je (odvisno od vhodnega materiala) mogoče doseči gostoto nad 1 kg/dm³. Končni izdelek se samodejno polni v vreče za shranjevanje brez ročnega rokovanja, kar omogoča neprekinjeno obratovanje. To omogočajo 4 briketirne stiskalnice (premer briketa 70 mm) in 1 peletirni stroj (premer peleta 6 mm), ki jih je mogoče namestiti v hali dimenzij 15 x 20 x 6,3 metra. Oprema omogoča 16 ur dela na dan, pri čemer sta dva cikla po 7 ur neprekinjenega delovanja. Sistem sestavljajo naslednje enote: - KSD900 drobilnik za slamo (2 kosi) - AVSZ70 avtomatska priprava materiala (2 kosa) - Polžasti transporterji (3 kosi) - Koritasti polžasti transporter (2 kosa) - CSV70 cevna povezava (2 kosa) - PFK70 selektor prahu in filter prahu (1 kos) - PF70 filter prahu (1 kos) - ST70 silos (6 m³) (2 kosa) - BS70 stiskalnica za brikete (4 kosi) Stiskalni bat tlači material v stožčasto cev, kar ustvari neprekinjeno palico s premerom 70 mm. Pritisk je nastavljiv, prav tako dovod materiala preko polžastega podajalnika. Zamenljivost stiskalnih orodij omogoča nadzor kakovosti in gostote izdelanih briket. Po želji ter glede na vrsto surovine dobavimo različne tipe stiskalnih orodij, ki jih pred dobavo preskusimo, če kupec dobavi vzorec surovine. Z menjavo orodja je stroj primeren tudi za proizvodnjo stelje, razsute krme ali izdelavo različnih mešanic po naročilu. Material se stiska brez veziv ali kemikalij. Glede na vhodno gostoto materiala se pridobijo različni produkti, katerih specifična teža lahko preseže 1 kg/dm³. Zmogljivost sistema za peletiranje in briketiranje je 1,5 t/h (podatki za pšenično slamo). Proizvodnja in kakovost izdelka sta odvisni od nastavljive hitrosti polža in pritiska stiskalnice, glede na kakovost surovine. Električna priključna moč: 37 + 10 kW. - Stiskalna cev (4 kosi) - Rebrasti transportni trak (1 kos) - HF70 regulator temperature hlajenja/ogrevanja (4 kosi) - AVP70 nadzorna enota (4 kosi) PELETIRANJE biomase – tehnologija: Končni izdelek: peleti premera 6 mm, dolžine 10–40 mm, Vhodna surovina: seno, slama. Vlažnost: največ 10 %. Tehnološki postopek vključuje: predmletje (sušenje), mletje, dozirno enoto, navlaževanje, stiskalnico za pelete, hladilni sistem, sito, filter in napravo za ročno polnjenje vreč. Tip stroja: MiniPell (1 kos) - zmogljivost stroja: 50–120 kg/h - elektro motor stiskalnice: 10 kW - dozirna enota: 0,37 kW - masa: 750 kg - Mlin (1 kos) - Zaslon nadzora in ročni polnilnik za vreče (1 kos)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1630, skupna masa: 7.800 kg, trajanje garancije: 6 meseci, moč: 85 kW (115,57 KM), Prodaja se kompletna proizvodna linija na osnovi briketirke Di Più BRIK MB100 (complete production line). Generalno obnovljen stroj DI PIU BRIK MB100 (tovarniško obnovljen leta 2025), pripravljen za takojšnje delovanje. Stroj je namenjen visokozmogljivemu briketiranju. Primeren je za zahtevno industrijsko uporabo. Stroj ima za seboj približno 2.000 delovnih ur. Stroj je na novo obnovljen v tovarni Di Piu, zamenjani vsi vitalni deli, vsi kabli, električna napeljava, ter potrebna električna oprema. S čimer je stroj dan v stanje novega in ima 6 mesečno tovarniško garancijo proizvajalca Di Piu. Stroj lahko proizvaja brikete z luknjo ali brez, debeline 90mm do 110mm iz mehkega in trde lesa, okrogle ali kvadratne. Ogled stroja je možen v tovarni v Italiji: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italija Itsdpfx Aewrp Emjb Aog Mehanska briketirka Di Piu BRIK MB100 je avtomatski stroj za stiskanje lesa, žagovine in drugih odpadnih materialov v lesne brikete. Idealna vlažnost vhodnega materiala je med 8 % in 12 %, velikost delcev pa med 1 mm in 12 mm. Tehnični podatki: -Kapaciteta proizvodnje: 1.300 – 2.300 kg/h (pri gostoti žagovine 160–200 kg/m³) -Premer briketa: 90 – 110 mm -Moč glavnega motorja: 75 kW -Skupna instalirana moč: 98 kW -Tlak stiskanja bata: 2.000 – 2.500 kg/cm² -Vertikalni polž z reduktorjem: 5,5 kW -Oljna črpalka: 1,5 kW -Oljna črpalka za zapiranje iztiskalne glave: 1,5 kW -Dozator s polžem in nastavljivo hitrostjo: 1,5 kW -Oljni sistem za mazanje bronastih ležajev: 100 litrov -Senzor za nadzor izhoda briketov (samodejni izklop ob izpraznitvi materiala) -Zaščitne obloge gibljivih delov -Senzor tlaka olja -Krmilna omarica -Zalogovnik za vhodni material (akumulator) -Senzor nivoja za nadzor napajalnega sistema -Teža stroja: cca 7.800 kg Stroj je opremljen z vsemi pripadajočimi dodatki za popolno delovanje in integracijo v linijo za briketiranje: DODATNA OPREMA – MB100: - Dozirni silo: Izdelan iz masivne jeklene konstrukcije. Premer: 1500 mm, višina: 1000 mm. Vgrajen ima rotacijski rezalnik z reduktorjem 2,2 kW, nameščen na robustno jekleno ogrodje. Dovajanje materiala nadzira senzor nivoja. - Linija za hlajenje briketov po iztiskanju, skupne dolžine 20 metrov - Avtomatska žaga za razrez briketov - Žaga samodejno reže brikete na dolžine, ki jih predhodno nastavi operater. - Naprava za proizvodnjo briketov z luknjo - Sistem za hlajenje glave stroja z ledeno vodo - Sistem proizvaja 50 litrov/minuto ledene vode za učinkovito hlajenje glave briketirke. - Zračno hlajen hladilnik vode z hermetičnimi spiralnimi kompresorji, mikroprocesorskim krmiljenjem in velikim rezervoarjem za shranjevanje energije, v katerem je potopljen izmenjevalnik toplote voda–hladilno sredstvo. - Izmenjevalnik toplote je visokoučinkovit tipa “fin-pack”, izdelan iz bakrenih cevi in aluminijastih lamel. - Rezervoar za vodo prostornine 800 litrov - Črpalka za dovod vode (50 l/min – 20 m.c.a. – 0,55 kW) s trikrožnimi ventiloma DN25 za uravnavanje temperature hladilne vode v glavi briketirke. - Digitalni elektronski regulator temperature povezan s senzorjem NTC (merilni element d.6 × 52 mm, IP68, AISI 316). DODATNO: NOVAPAC pakirka Možnost dodatnega nakupa pakirke NOVAPAC, ki je popolnoma kompatibilna s strojem Di Più BRIK MB100 in drugimi stroji, idealna rešitev za avtomatsko pakiranje neposredno po stiskanju. Letnik: 2013 Cena za Novapac: 19.000 € Oprema vidna na zadnjih 6 slikah

Stanje: novo, Leto izdelave: 2025, Kompaktna hidravlična briketirka. Glavni motor ima moč 4 kW, premer briketa je 50 mm. Kapaciteta stiskalnice znaša 30–50 kg/uro. Stroj je nov in ima certifikat CE. Po želji je možna dobava z oljnim hladilnikom. Za več informacij obiščite naš YouTube kanal, spletno stran ali Facebook profil. Isdefk N Tpspfx Ab Astg

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, WEIMA TH 400 Briquetting Press – After technical inspection – Made in Germany – Very good condition – Year of manufacture: 1992 TECHNICAL DATA: Main motor power: 7.5 kW Machine output: approx. 80 kg/h Briquette diameter: 50 mm Feeding hopper dimensions: 2000 x 1800 mm Screw conveyor for material feed to the press piston Agitator Machine dimensions (L/W/H): 240 / 190 / 200 cm Weight: ~850 kg WEIMA TH series hydraulic briquetting presses are compact machines for briquette production. The presses can be loaded manually or automatically directly into the hopper. Thanks to their small footprint and quiet operation, these machines are ideal for installation in production halls. Features: – Reduction of production waste volume – Low purchase costs – Low energy consumption – Compact design requires little space – Excellent processing quality – Durable construction and long service life – Trouble-free maintenance and low wear Isdpfx Ast U Et Neb Ajtg – Easy operation Main applications for briquetting presses include for example: – In combination with dust extraction or filtration and dedusting systems – For manual material feeding – Integrated with a shredder (e.g., WEIMA WL4) – Via screw conveyor or belt conveyor – With a mobile extraction unit or combustion furnace

Stanje: novo, Wood Briquetting Press Amis ABP 60 L - Ex-demonstration machine - ----- Technical Data ----- Briquette diameter: 60 mm, Hydraulic unit: 3 kW / 140 bar, Voltage: 400 V, Frequency: 50 Hz, Fuse protection: 16 A, Throughput approx.: 20-35 kg/h, Weight approx.: 300 kg - Extremely easy operation - Hydraulic control system - Briquette diameter: 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as controllers, sensors, or complex controls - Large feed hopper - Hardened briquette tongs - Replaceable press ram - Pressing without the addition of binders - Thanks to the pre-compactor, even bulky shavings can be processed Itedpfx Abou R Sxxj Aog - No adjustments or pressure monitoring necessary - New ex-demonstration machine -

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW Ijdpfx Abod Nm Sij Astg 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes Itsdpsgl Nlmjfx Ab Aog CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry Iodpfx Absgmh H Tj Aetg + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Iedpfx Abov Rpxls Ajtg Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput Itodpfx Abjv Sqrpj Aeg - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Itjdpfochqxxsx Ab Ajg Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna Iedjchuvropfx Ab Astg

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result. Ijdpfjxfwdsx Ab Ajtg

Stanje: novo, Leto izdelave: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS (polystyrene) with a 15 mm screen Motor: 11 kW – 400 Volt Iodpozbizjfx Ab Astg (9.2 kW or 15 kW available upon request) Optional: *Surcharge for the next larger machine with 18.5 kW motor and larger silo diameter: + €1,995 net Sturdy steel construction Hardened cutting knives Screen with interchangeable inserts Choice of perforation: (10), 15, 22, 26, 30, 40, or 60 mm holes With electric drive: star-delta switch, overload protection, and 8 m supply cable, ready to connect Discharge spout: 150 mm diameter Optional for plastic or grain pipes Blowing distance approx. 12 m Chassis with two running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm) All wheels solid rubber Dimensions approx. 1200 x 900 x 1270/1400 mm (LxWxH) Weight approx. 240 kg Spare parts prices and options: 24 knives, hardened: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Lid: €290 each (net) Polystyrene disc: €600 each (net)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Demonstration machine with approx. 9 operating hours Another machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput performance We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15 pieces, reversible multiple times, Optional double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening 630 x 820 mm Hopper volume approx. 0.6 cbm Hydraulically operated pusher Screen perforation of your choice (10–40 mm) Extraction port Ø 160 mm Itsdpfx Ajb Ny Eysb Ajg Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when rotor idling - Rotor speed 70–90 rpm for high throughput - Timed control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder accessories for extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco Rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or materials less than 3 mm in thickness) - Angled conveyor belt + €8,770 net Angle: adjustable 0–60 degrees Discharge height: approx. 2,000 mm - Automatic overbelt magnet + €5,980 net - Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content) - Conveyor and overbelt magnet control + €2,750 net (Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net Raw material requirements: - The moisture content (dry basis) must be below 30% - Installation temperature: heated room with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., cause increased wear