Ločevalnik Tekočin Za Npr. Stroj Za Odstranjevanje Ostrin nakup rabljenega (92.478)

Stanje: novo, Idealna dopolnitev za vaš brusilni / odstranjevalni stroj (ustrezen odstranjevalni stroj imamo tudi na zalogi :)!) Mokri ločevalnik znamke Ulmatec Material za odsesavanje: jeklo / nerjaveče jeklo / aluminij, suh prah Elementi, ki pridejo v stik z vodo, so iz nerjavečega jekla. Upravljanje preko zaslona. Motor: 7,5 kW, 400 V, 50 Hz, IE3 Hedpfx Alsx Diiaotsr Maks. zračna količina: pribl. 11.000 m³/h Maks. podtlak: pribl. 4.000 Pa Sesalni nastavek: Ø 355 mm Izpust: izpustni ventil Polnjenje: Samodejno preko magnetnega ventila Vključuje: Hepa naknadni filter (predelava nerjavečega jekla) Atex izvedba (npr. pri obdelavi aluminija) Brez cevovodov Razdalja odsesavanja - stroj največ 10m Priklop na lastno omrežje izvede stranka.

Stanje: rabljeno, Nicholson A5/35” takoj na voljo. Premer debla: 8-90 cm. Hodpfxsxpvxxo Altsr

Stanje: dober (rabljeno), Min.-max. tube length: 100–1800 mm Hedpfx Alsq U Rcceter The machine was previously used for deburring cut tubes!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Boschert Brushing Deburring Machine Model K3 for deburring straight sheet metal edges and at the lateral aggregate suitable for cut-outs and notches up to 70 mm depth as well as outside radii on sheet metal. 3 motors, each 1.5 kW Brush diameter: 300 mm Brush material: wire brushes VA/steel Material thickness range: 0.8–8 mm Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Base frame: 800 mm high (working height 920 mm) Hodpfxjtr Avij Altjr Table support: 200x1400 mm Hold-down as sheet guide The sheet edge is deburred simultaneously from above and below as it is guided through the machine. For heavy burrs, the motors can be switched to operate together so that both remove the heavy burr from above. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table extension serves as a storage surface.

Stanje: rabljeno, Stroj za odstranjevanje ostrih robov, strojno obdelavo površin, vibracijski stroj za poliranje, vibracijski stroj za brušenje, rabljen stroj. Proizvajalec: Vibrochimica Tip: VBTS 651/3 Zunanje mere: 2260 x 1870 x 1450 mm Hedpfozka Dzjx Altsr Letnik: 2008 Teža: 1160 kg Električni podatki: 400 V; 5,5 kW d: 840 mm D: 1340 mm Premer torusa: 430 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, moč: 19 kW (25,83 KM),

Stanje: rabljeno, številka stroja/vozila: 27977, Eyeletting machine Hang 103LO, Serial No. 27977 Online video inspection via Skype video We would be pleased to welcome your visit – more machines available in stock Immediately available – inspection possible In stock in Emskirchen / Nuremberg – test run possible Hjdjh Axgcepfx Altsr

Stanje: rabljeno, številka stroja/vozila: 11388, Eyeletting machine Hang 103SP, Serial-No. 11388 Online video inspection possible via Skype We would be pleased to welcome your visit – more machines in stock Available immediately – viewing possible Hedpfx Ash Axggelter Located in Emskirchen / Nuremberg – Test run possible

Stanje: rabljeno, številka stroja/vozila: 14889, Eyeletting machine Hang 103 SP, SN 14889 / Serial No. 14899 Foot-operated Hodpeh Axz Nofx Altjr Online video inspection via Skype possible. We would be pleased to welcome your visit – further machines in stock. Available immediately – ready for inspection. Located in Emskirchen/Nuremberg – machine can be tested on site.

Leto izdelave: 1995, stanje: rabljeno, Diameter 0 mm Workpiece length 1000 mm Workpiece width 875 mm CNC deburring cell, with 2 pallets / 10 WW / 510 - 5 axes CNC - SIEMENS 510 controlled flexible brushing and deburring center Hsdpjt Hwu Nsfx Altjr

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Hjdpfxot Hw Iij Altsr Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Hodpot Hw Shjfx Altor Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Both units with oscillation: yes Hedpfx Ajv R U Ifsltjr Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: novo, Leto izdelave: 2024, Delovna širina: 380 mm Delovna višina: 150 mm 1. Sklop, rotorska skupina: Skupina 5 nihajnih rotorskih ščetk, Ø 115 mm, vsaka z motorjem 3 kW 2. Sklop, ščetka: Scotch Brite Hard / premer 210 mm, variabilni pogon Nastavitev višine: ročni ročaj Prikaz višine: mehanski števec Hitrost podajanja: 4 - 12 m/min Moč pogonskega motorja: 0,37 kW Vakuumska preproga: da Dolžina stroja: 1400 mm Hedpfx Aljtnf Rretor Širina stroja: 900 mm Teža: 500 kg

Stanje: rabljeno, Širina reza: 430 mm Hitrost rezanja: 24 m/min Največja vhodna višina: 90 mm Vrzel med rezili: 0 - 5 mm Minimalna dolžina obdelovanca na dovodnem traku: 400 mm Dovodni trak: 850 x 425 mm Odtokovni trak: 650 x 425 mm Hsdpfxet Uqbfe Altor Skupne dimenzije (Š x V x G, z/ brez odtokovnega traku): 800 x 1190 x 1660 / 1210 mm Teža (z/ brez odtokovnega traku): 225 / 210 kg Moč motorja: 0,75 kW Električni priklop: 3~ 400 V, 50 Hz, 16 A Stisnjen zrak: ni potreben

Stanje: rabljeno, Stroji za odstranjevanje kože Maja Tip: ESB 3441 Hedpergar Tofx Alter Moč: 1,1 kW Napetost: 380 V Dimenzije: 70x114x95 cm Dobavni rok: 10 delovnih dni po prejetju avansa

Stanje: rabljeno, Stroj za odstranjevanje kože Iz nerjavečega jekla Proizvajalec: Maja Model: BXA 554 Dimenzije: 1250x1050x2000 mm Napetost: 400V 50Hz 3N Hodpfx Aler D Rh Notjr Električna moč: 1,1 kW Širina noža: 554 mm

Stanje: rabljeno, Model: David 200 naprava za odstranjevanje ščetine in plamenjenje Kapaciteta zakola: približno 40–50 prašičev na uro Primerno za prašiče do približno 270 kg Hjdpfxetq T Tke Altsr Ohišje stroja iz vroče cinkane ali nerjaveče pločevine Vgrajena električna omarica Valj opremljen s 36 posebnimi tolkači Električna moč: 5,5 kW Mere stroja (v cm): Širina: 240 Dolžina: 340 Višina: 250

Stanje: rabljeno, Tip: David stroj za oparjenje in osmoditev svinj Kapaciteta klanja: približno 40-50 prašičev/uro Največja teža prašičev: do približno 270 kg Ohišje stroja: vroče cinkano ali iz nerjavečega jekla Vgrajena elektro omara Valj opremljen s 36 posebnimi tolkači Električna moč: 5,5 kW Vgradne dimenzije stroja (v cm): Širina: 240 Dolžina: 340 Višina: 250 Hjdpfx Aog Swz Holtor Dobavni rok: po prejetem avansnem plačilu je stroj običajno obnovljen in pripravljen za dobavo

Stanje: rabljeno, Stroji za odstranjevanje kože Maja Hodpfxsqlcbks Altjr Dimenzije: 70 x 85 x 120 cm

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Ponujamo strojno opremo za odstranjevanje ostrih robov – Bütfering. Največja delovna širina: 1350 mm, podajalna hitrost: 20 m/min, stopnje obdelave: 3, 1. stopnja obdelave: brusni trak, 2. stopnja obdelave: 2 vrsti krožnih čopičev, 3. stopnja obdelave: polirni trak, minimalna in maksimalna debelina obdelovanca: 0,5 mm/100 mm, maksimalna debelina materiala: 100 mm. Vključuje poškodovan transportni trak in brusne trake. Dimenzije stroja: 2000 mm/2050 mm/3400 mm, teža: približno 6000 kg. Ogled je možen po predhodnem dogovoru. Hsdpozl U I Dofx Alter

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.500 mm, hitrost pomika os X: 4 m/min, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 102 mm, skupna dolžina: 2.300 mm, skupna širina: 2.600 mm, skupna višina: 2.500 mm, skupna masa: 4.000 kg, delovna višina: 950 mm, dolžina obdelovanca (maks.): 102 mm, Double-sided deburring in just one pass – with 100% reproducible results and precise processing of both internal and external edges: only the EdgeRacer 1500 D offers this. Hodpoucw Rbsfx Altor The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, threaded holes, and similar features. The maximum workpiece height is 102 mm. The brushes working from above and below can be adjusted independently. Thanks to the roller conveyor, the adjustment can also take place below or above roller table level.

Stanje: novo, Leto izdelave: 2025, Available from stock! Deburring and fine grinding machine with 3 working stations: Abrasive belt – Brush station – Abrasive belt Effective maximum working width: 1150mm Standard workpiece thickness: 0.8 – 150mm Digital workpiece thickness display on the control panel, accuracy 0.1mm Adjustable pressure rollers before and after the working stations Abrasive belt insertion on the left Abrasive belt centering by electronically controlled photo cell, emergency stop in case of tracking error or belt breakage Infinitely variable conveyor feed speed Includes the following options: Preparation of machine base for forklift loading Hsdpfxspwh Tfe Altjr Extraction collector in galvanized sheet metal for machine with 3 working units plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces on the feed belt. Includes perforated feed table and belt, as well as a high-performance electric fan and sound-insulated outlet in accordance with CE standard, 5.5kW 2x Grit-Set for electronic fine positioning of the contact rollers Adjustment and display (0.01mm) on the operator panel, stand-by position with pneumatic return of the contact roller in case of emergency stop Frequency controlled drive motors for abrasive belt cutting speed, motor power per unit: 11kW Electronic adjustment of the brush unit HMI Vision – PLC control with visualization of various machine settings via color touch screen Storage capacity of up to 250 grinding programs

Stanje: pripravljen za uporabo (rabljen), BJZ NTM 300 SL stroj za ločevanje komercialnih izdelkov maks. dolžina rezanja: 300 mm Teža: cca 110 kg Obratovalni tlak: 6 bar Vabljeni na ogled stroja. Na vašo željo lahko uredimo tudi ugoden prevoz! Prejeli boste ustrezen račun. Za tuje stranke lahko izdamo tudi neto račun. Pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Hodpfxoxdw Eps Altor Obiščite našo trgovino in si poglejte še ostale naše ponudbe. Navedeni imena podjetij in blagovne znamke so last njihovih imetnikov ter služijo izključno za identifikacijo in opis izdelkov. Možna so odstopanja tehničnih podatkov ali napake v opisu artikla.

Stanje: rabljeno, Leto izdelave: 2012, Delovna širina: 1350 mm Debelina obdelovanca – maks. 160 mm Masa stroja: približno 4000 kg Oprema: - Sistem za odsesavanje prahu - Nadomestne krtače Hjdpfx Ajzkvyfeltjr - Navodila za uporabo