Hsm Vk 3012 nakup rabljenega (450)

Stanje: delavnici obnovljeno (rabljeno), dolžina bale: 1.200 mm, širina bale: 700 mm, višina bale: 800 mm, teža bale: 380 kg, Stiskalnica v idealnem stanju, po obnovi ni bila uporabljena. Servisirana izključno pri proizvajalcu. Idealno stanje. Popolnoma samodejno delovanje. Nastavljiva dolžina bale 600-1200 mm. Motor 15 kW. Leto 2007. Teža bale približno 380 kg. Gbedpfsx S Sbdjx Anfsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Gsdpfoyz Af Eex Anfsbl Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 7.500 mm, dolžina bale: 120 mm, širina bale: 750 mm, višina bale: 1.100 mm, teža bale: 550 kg, skupna masa: 9.000 kg, Oprema: dokumentacija / priročnik, Automatic baler HSM VK 4812 The machine is in perfect condition. It has only 1,950 operating hours and has processed just 1,314 bales of material. The baler has been regularly serviced and has operated indoors since new. It has worked with very low-contaminant material—mainly textile offcuts. Key advantages of the machine: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle → ideal for integration with conveyor lines - Significantly better performance than the 15–22 kW version with high material flow Technical data: Pressing force: 480 kN (approx. 48 tons) Motor power: 30 kW Connection load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressure: 58.2 N/cm² Volume throughput: up to 332 m³/h Weight throughput (practical): approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical max. throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Press channel: 1100 × 750 mm Feed opening: approx. 1020 × 1250 mm Gedpfx Aoy Dpy Uenfsbl We also have other balers in stock. Transportation costs depend on weight, volume and, most importantly, distance. For inquiries, please provide the following information: delivery address (postal code and city). Further details require a phone call, so please inquire by phone about transportation costs and alternative delivery methods. Our contact details can be found in the seller’s legal information. We sell and export worldwide. Thanks to our large warehouse capacity, we can also supply larger quantities flexibly and quickly. We issue intra-Community invoices – VAT-exempt. Opening hours: Mon-Fri: 8:00–16:00 Sat: closed

Stanje: rabljeno, Avtomatska balirka HSM 4012 Tlačna sila: 45 ton Moč motorja: 15 kW Napajanje: 400 V / 50 Hz Dimenzije bale: pribl. 900 × 720 × 600–1200 mm Prerez bale Š x V: 900 x 720 mm Prostornina rezervoarja: 300 l Teža bale: do 400 kg, odvisno od materiala Vezava: 3-kratna avtomatska z žico Nakladalna odprtina 820 × 1250 mm prilagojena za kontinuirano nalaganje, npr. s transportnim trakom Dimenzije in masa stroja pribl. 6180 × 3190 × 2540 mm teža: pribl. 7–8 ton Materiali za stiskanje karton papir plastične folije Gbedpev Ak Dgefx Anfsl lahki embalažni odpadki Balirka je bila servisirana pri podjetju HSM.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, Technical data: Press force: 1,000 kN Specific press force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency controlled Voltage/Frequency: 400 V / 50 Hz Cycle time (idle): 8.3 s Idle capacity (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening width x length: 970 x 1,800 mm Bale width x height x length: 1,100 x 750 x 600–2,000 mm Maximum bale weight: 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with associated shaft covers - 1 support structure and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500 kg soft wire coils - 10 wire reel trolleys - 1 multi-control system for the baler - Full set of design documentation and maintenance history - Maintained and serviced by the manufacturer Commissioning upon request. Gbsdpfxsygud As Anfel Weight: 33,000 kg Binding type: Wire Processable materials: Plastic film, mixed paper, cardboard, hollow containers made of HDPE/LDPE, and plastic bottles The system is operational and can be inspected while running. The machine will be dismantled on 16.02. and can be inspected at our premises thereafter. Available immediately!

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, Gbsdeymmtcjpfx Anfsl We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 11.850 h, stiskalna sila: 88 t, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), Te koop: gebruikte balenpers + gebruikte transportband Merk: HSM VK 88 + Stadler KF1800 Balenpers is een VK 88 R – FU, met frequentieregelaars, 2 x 45 kW. * Ontblokkeercilinder optie * Kogelgewricht bevestiging hoofd cilinder * Stadler transportband, 1600 mm intern Bouwjaar 2012 11.850 uur Stang hoofdcilinder en afdichtingsset nieuw. Te vervangen: 2 secties van de voorste bodem van de perskamer: het middelste en het voorste gedeelte naar het kanaal toe. Smering / vervanging: Enkele zij-diabolo’s zijn gebruikt en nog in bedrijf, sommige zijn roestig, sommige in goede staat. Pers werkt goed en knoopmechanisme functioneert zoals het hoort. Perswielen OK Pers zijwielen OK Stang hoofdcilinder: vrijwel nieuw Afdichtset hoofdcilinder: vrijwel nieuw Nylon strips aan perszijden: 80–90% goed; geometrie eventueel fine-tunen door het toevoegen van vulringen (klant heeft onderdelen op voorraad). Mes / contrames: goed, 70% Naaldwielen: oké maar vervanging aanbevolen + de sluitplaten. Hoofd frequentieregelaar 1 van 2: In totaal 2 x 45 kW: één is defect. Onbekend of deze nog vervangen wordt. Pers draait momenteel op één pomp. Zijwanden kamer: Zijwanden zijn versleten op de plekken waar de nylon geleideplaten schuiven: slijtage van enkele millimeters tot gemiddeld 2 mm. Transportband: Kettingrollen zijn gebruikt met wat speling. Smering ontbreekt maar zijn nog in goede staat. Geleidestrips zijn goed. Gbjdsyuyg Sopfx Anfsl Voerlatten zijn nagenoeg allemaal versleten. Start/stop met frequentieregelaar. Zijwanden zijn goed op het hellende deel en in de put. Draadrolplatform: niet inbegrepen.

Stanje: pripravljen za uporabo (rabljen), Baler HSM VK 42/1200 fully automatic Pressing force: 42 tons Gbedpjra Nrxofx Anfol Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Press length: approx. 7 meters Press weight: approx. 6,000 kg Tying: 4x automatic wire tying

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 20.580 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 450 kg, vhodni tok: 59 A, skupna masa: 12.000 kg, transportna višina: 2.750 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), transportna širina: 2.300 mm, transportna dolžina: 8.500 mm, kapaciteta rezervoarja: 300 l, Good day, We are pleased to offer you, without obligation, a used baler manufactured by HSM, model VK 4812. The following technical data has been taken from the manufacturer's operating manual and brochures, for which we do not assume any responsibility for accuracy or completeness. Manufacturer: HSM Model: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Main press force: 48 t Godpfxst H Rcaj Anfobl Drive power: 30 kW Machine weight (press): 12 t The machine documentation is available in German. An inspection can be arranged by appointment at our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 123 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Model: V-Press 860 plus Year: 2021 Operating hours: 123 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theoretical cycle time (idle): 25 s Theoretical press capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2,213 kg Gbjdpjy R Tncjfx Anfel Materials: film, paper, cardboard Note: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We accept no liability for the details provided or any potential errors. Offers are subject to change without notice, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 450 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Suitable materials: film, paper, cardboard Comment: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data are based on information provided by the manufacturer. We do not assume any liability for the accuracy of the information or for any possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee. Gjdpfx Aey R Srtonfsbl Our payment terms are 100% advance payment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, teža bale: 550 kg, Oprema: dokumentacija / priročnik, Used vertical baler HSM V-Press 1160 Plus, manufactured in 2015. The machine is regularly serviced by an authorized service center. The baler is fully operational and in very good technical condition. Gedpfxsy Iyu Do Anfjbl Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Bale material: film, mixed paper, cardboard, cutting waste Freight costs depend on weight, volume, and especially the distance. For inquiries, the following information is relevant: delivery address (postal code and town name). Further details require a phone call, so please contact us by phone to discuss transport costs and delivery modalities. Our contact details are found in the legal information of the seller. Payment in cash upon collection on site is possible. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Please contact us before purchase. We issue intra-community invoices (VAT excluded). Business hours: Mon-Fri: 8:00 – 16:00 Sat: closed

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, teža bale: 370 kg, HSM HL 4010 Re / Li horizontalna balirna preša. Opremljena s prekucnikom za košaro. Letnik proizvodnje: 2015. Zelo dobro ohranjena – redno vzdrževana v pooblaščenem servisnem centru. Pripravljena za uporabo. Možna vezava z žico, vrvico ali polipropilenskim trakom. Gbodpfx Aoy Iyd Sjnfel Polavtomatski balirni prešni sistem s 40-tonskim pritiskom za učinkovito zmanjšanje prostornine ostankov (reciklažnih materialov) v industriji in trgovini: Karton Tetrapak Folije Pene PET plastenke Izolacijske podloge in drugi stisljivi materiali. Tlačna sila: 400 kN Transportna širina: 1,767 m Transportna višina: 2,489 m Transportna dolžina: 5,573 m Teža: 4.500 kg Moč pogona: 7,5 kW Teža bala (odvisno od materiala): 300–350 kg Dimenzije bale d x š x v: 750 x 1200 x 750

Stanje: zelo dobro (rabljeno), Baler HSM V-Press 825 Plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading aperture (width x height): 1195 x 530 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Machine dimensions (width x depth x height): 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Pressed materials: film, mixed paper, cardboard, die-cutting waste, textiles Year of manufacture: 2012–2014, price: 6,000 EUR Gedpfov Akcisx Anfsbl Baler HSM V-Press 825 Pro, year: 2019–2021, price: 9,000 EUR

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Model HSM HL 3521 S s svojim zelo velikim polnilnim odprtinom je optimalna naprava za stiskanje večjih količin papirja, kartona, folije in drugih embalažnih materialov posebej velikih in nerodnih dimenzij. Model HSM HL 3521 S je prav tako specialist za stiskanje zelo razteznih materialov kot so npr. pene. Stiskalnica je bila kupljena kot tovarniško nova. Redno vzdrževana. Cena novega stroja: približno 90.000 € Leto proizvodnje: 2023 Sila stiskanja: 320 kN Največja teža bale: 600 kg Dimenzije naprave (š x d x v): 7900 x 1660 x 2485 mm Polnilna odprtina (š x v): 800 x 2100 mm Gbodpjy H Dazofx Anfel Na voljo je več kosov modela HL 3521S iz letnikov: 2011 / 2015 / 2017 / 2023

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 119 h, Funkcionalnost: popolnoma funkcionalen, Presse verticale à balles HSM V-Press 860 plus B, Année 2019 Données techniques : Fabricant : HSM Modèle : V-Press 860 plus B Année : 2019 Heures de fonctionnement : 119 Force de compression : 60 t Puissance motrice : 4 kW Ouverture de chargement : 1500 x 651 mm Hauteur de chargement : 1129 mm Dimensions de la balle : env. 1500 x 1200 x 780 mm Poids de la balle : 550 kg Liaison : manuelle Temps de cycle théorique à vide : 25 s Rendement théorique : 32,5 m³/h Dimensions : 2099 x 1245 x 2985 mm (L x P x H) Poids : 2340 kg Matériaux : Film, papier, cartons Remarque : La presse est en très bon état. Veuillez noter : Godpfxey I Rnus Anfjbl Toutes les données techniques sont basées sur les indications du fabricant. Nous n'assumons aucune responsabilité quant à l'exactitude des informations ou de possibles erreurs. Offres sous réserve, sous réserve de vente préalable et révocables à tout moment. Les visites sont possibles sur rendez-vous. Vente sur site, sans garantie ni responsabilité. Nos conditions de paiement : 100% paiement d'avance.

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feeding opening (W x H): 1,195 x 650 mm Bale size (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Gedpfjra Rbgox Anfobl Binding material: wire Pressable materials: film, mixed paper, cardboard, die cuttings, textiles, Big Bags, EPS HSM V-Press 860 plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 HSM V-Press 860 plus baler, year 2019, price: €9,000 HSM V-Press 860 plus baler, year 2024, price: €10,000 HSM V-Press 860 new, ex-display, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H) mm: 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H): 1,213 x 1,824 x 2,987 mm Feed opening: 1,200 x 565 mm Cycle (seconds): 35 Pressing force (T): 54 Power supply: 400 V (three-phase) HSM V-Press 860 plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V / 50 Hz Power: 4 kW Feed opening (W x H): 1,500 x 651 mm Bale size (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Loading method: manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Pressable materials: film, cardboard Idle cycle time: 25 s

Stanje: pripravljen za uporabo (rabljen), Model balirnega stiskalnika HSM V-press 1160 plus Pritisk (kN): 532 Teža bale, odvisno od materiala, do 550 kg Najv. dimenzija bale (mm): 1200x1100x1000-1200 Dimenzije D x Š x V (mm): 1780x1150x2985 Moč (kW): 7,5 Teža (kg): 2300 Letnik 2007–2010 cena 5800 EUR Letnik 2011–2013 cena 6000 EUR LETNIK 2018 STANE 6000 EUR Gbedpfx Anjra Nyujfel Na voljo imamo tudi balirne stiskalnike HSM v press 1160 max letnik 2014–2015

Stanje: pripravljen za uporabo (rabljen), HSM 155 VL Baler Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 200 – 250 kg (cardboard) Technical specifications: Gbjdpora Nrmefx Anfjl L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressing force: 16 tons Power supply: 400 V (three-phase) Motor power: 4 kW Bale ejector HSM 155.1 VL Baler Pressing force: 18 tons Price for HSM 155.1 VL baler – 2,600 EUR HSM 155.2 VL Baler Pressing force: 16 tons Price for HSM 155.2 VL baler – 2,800 EUR

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, stiskalna sila: 70 t, Oprema: dokumentacija / priročnik, Horizontalna balirna stiskalnica HSM HL 7009 Re/Li. Stroj je v zelo dobrem stanju in ga redno vzdržuje pooblaščen servisni center. Ta balirna stiskalnica je zasnovana za večje projekte odstranjevanja odpadkov v maloprodaji ter v manjših in srednje velikih centralnih skladiščih. Stiski modela HL 7009 imajo prečni prerez 1100 x 1100 mm in lahko pri dolžini baleta 1200 mm tehtajo do 600 kg. To zagotavlja optimalno izkoriščenost nosilnosti tovornjaka. Pritisna sila: 700 kN Specifična pritisna sila: 58 N/cm² Pogonska moč: 10,5 kW Napetost / frekvenca: 400 V / 50 Hz Nazivna prostorninska zmogljivost (teoretično): 42,97 m³/h Odprtina za polnjenje – širina x dolžina: 890 x 1020 mm Gbsdpoy D Rxfefx Anfsl Dimenzije baleta – širina x višina x dolžina: 1100 x 1100 x 1200 mm Skupne dimenzije – dolžina x širina x višina: 5366 x 2525 x 2559 mm Teža baleta: 600 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, vhodna napetost: 400 V, teža bale: 550 kg, skupna masa: 2.450 kg, Used vertical baler HSM V-Press 1160 Plus, manufactured in 2015. The machine is regularly serviced by an authorized service center. The baler is fully operational and in very good technical condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Bale material: film, mixed paper, cardboard, cutting waste Freight costs depend on weight, volume, and especially the distance. For inquiries, the following information is relevant: delivery address (postal code and town name). Further details require a phone call, so please contact us by phone to discuss transport costs and delivery modalities. Our contact details are found in the legal information of the seller. Payment in cash upon collection on site is possible. Gbjdpfjy D Hgxox Anfol We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Please contact us before purchase. We issue intra-community invoices (VAT excluded). Business hours: Mon-Fri: 8:00 – 16:00 Sat: closed

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, širina odprtine za polnjenje: 1.195 mm, dolžina polnilne odprtine: 65 mm, dolžina bale: 120 mm, širina bale: 110 mm, višina bale: 120 mm, teža bale: 550 kg, skupna širina: 1.570 mm, skupna višina: 2.985 mm, skupna dolžina: 1.800 mm, skupna masa: 2.403 kg, Znamka: HSM Tip: V-Press 1160 plus Leto izdelave: 2008 Tlačna sila: 532 kN Napetost: 400 V Maks. teža bale: do 550 kg (odvisno od materiala) Gbedjy R Sk Nopfx Anfol Dimenzije bale: 120 x 110 x 120 cm Teža stroja: 2403 kg Dimenzije stroja: 180 x 157 x 298,5 cm Velikost polnilne odprtine: 119,5 cm × 65 cm Stanje: zelo dobro! Video delujočega stroja je na voljo na zahtevo Možen je tudi prevoz

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 10 t, širina odprtine za polnjenje: 580 mm, dolžina polnilne odprtine: 900 mm, dolžina bale: 800 mm, širina bale: 500 mm, višina bale: 600 mm, teža bale: 100 kg, skupna širina: 1.000 mm, skupna višina: 1.540 mm, skupna dolžina: 4.700 mm, skupna masa: 1.200 kg, moč: 6,8 kW (9,25 KM), transportna dolžina: 4.700 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Stroj je bil pri nas obnovljen, popolnoma razstavljen. Glavni valj je bil na novo zatesnjen. Nove hidravlične cevi. Novo hidravlično olje. Podoljni oljni motor. Plošče iz pleksi stekla obnovljene. Godpfxsy D Dr Sj Anfebl Vodila valjev pritisne plošče na novo nastavljena. Trikratno vodoravno ročno vezanje. Vezanje z žico. Nastavljiva dolžina bale: 400, 600, 800, 1000 mm. Na voljo je uporabniški priročnik z elektro- in hidravlično shemo.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Balirni stiskalnik za bale cca 400 kg. Proizvajalec: HSM Model: HL 3521 Leto proizvodnje: 2006 Stanje: dobro Stroj je po velikem servisu. Zamenjana oljna črpalka. Oljni bati so bili obnovljeni. Gbsdsy A Hu Hjpfx Anfjl Po dogovoru je možna takojšnja prodaja in odprema.

Stanje: pripravljen za uporabo (rabljen), Sila stiskanja: cca 700 kN (cca 70 ton) Moč motorja: cca 11 kW Napajanje: 3 × 400 V / 50 Hz Teža posamezne bale: do cca 600 kg Dimenzije bale: cca 1100 × 1100 × 1200 mm Dimenzije stroja: cca 5,9 m dolžina, 2,5 m širina, cca 2,6 m višina Teža stroja: cca 7 ton Cikel: cca 45–47 s Konstrukcijske značilnosti: - velik polnilni odprtina za karton - možnost avtomatskega nalaganja (npr. s transportnim trakom) Gbedpfxjra Dddj Anfol - ročno vezanje z žico (4 žice) - hidravlična blokada palete in vrat za odstranitev bale Prednosti te preše: - velike bale = manj prevozov - visoka sila stiskanja - prilagojena za neprekinjeno delo Na voljo letniki: 2018–2020