Holz-Her Stoječa Krožna Žaga Za Les Her Sector 1260 Avtomatska nakup rabljenega (88.603)

Stanje: rabljeno, Leto izdelave: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting panel-shaped wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine: - Fully welded frame with extremely high rigidity - Precise guidance of the saw beam/saw unit for accurate cuts. Automatic feed for vertical and horizontal cuts. Maximum cutting depth: 60 mm Saw beam: - Robust saw beam guided on precision rails. Pneumatic locking of the saw beam at both bottom and top positions. Electrically monitored during vertical cuts. Saw unit: - Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded in the upper position for precise immersion of the saw unit. Generously sized levers for easy swiveling. Housing cover opens for full access to the saw unit, allowing easy tool changes with ProLock quick-release chuck. Viewing slot: riving knife can be retracted. Automation functions: Dcedsyuld Aopfx Ac Noh - Automatic plunge, cut, retract, and stop or - Automatic plunge, cut, retract, and return - Shortened return path (selector switch) - The shortened return capability of the saw beam eliminates unnecessary movement of the saw unit (when short workpieces are positioned on the right) Speed control: stepless from 6 – 24 m/min Cutting depth: max. 60 mm Control panel: - Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: - Sturdy, wear-free stainless steel support. Support extends to the cutting line: Narrow workpieces cannot tip over or fall through. Extraction: - Effective dust extraction with two ports: Saw unit Ø 120 mm, machine frame end Ø 100 mm (for TRK variant) Lift-roller transport system: - Manually raisable and lowerable rollers for easy and material-friendly panel transport. Measuring tape: - For displaying measurements of horizontal cuts with three manual indicators: - Absolute measurement from the lower workpiece support - Absolute measurement from the middle workpiece support - Series cuts from the top edge of the panel Power package: - The package includes the following options: 1. TRK extraction device 2. SuperCut scoring unit 3. Digital vertical display 4. Stepless speed control * Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Includes carbide-tipped circular saw blade Ø 250 x 30 x 3.2 mm, 48 teeth, hollow flat tooth * TRK system according to CE Guidelines SH 2200 (less than 2 mg of fine dust/m³ air) – required for all CE countries (extraction system provided by customer) Pneumatic shifting grid: - Continuous shifting grid along the entire length of the machine for stable workpiece positioning. Automatically, pneumatically retracted during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. * Digital measurement display for horizontal cuts at the control panel, including electronic fine adjustment. Displays: - Absolute measurement from lower workpiece support - Offset measurement from middle workpiece support - Series cuts from the top edge of the panel - Saw blade compensation (blade kerf width individually programmable) If the unit is braked at the beam...

Stanje: rabljeno, Leto izdelave: 2007, Použitý stroj Letnik izdelave: 2007 Oprema in tehnični podatki Dolžina reza: 5300 mm Višina reza: 2200 mm (višina obrezovanja 2110 mm) Globina reza: maks. 60 mm Odsesavanje: - Žagin agregat 120 mm - Konec ogrodja 100 mm Podlaga za obdelovanec: - Stabilna plastična podlaga za optimalno stabilnost tudi pri ozkih obdelovancih. - Ostružki se odvajajo skozi poševne reže. Transportni sistem z ročnim dvigovanjem valjev: Ročen za lažji in materialu prijazen transport Zaskočnik: Ročen, vertikalen in horizontalen Podajanje: Ročno, vertikalno in horizontalno Krožna žaga: HM, 250 mm, votli strešni zob, Z48 Motor žage: 4 kW pri 5450 obr./min, 400 V, 50 Hz Zložljiva letev: vključno z naslonom za obdelovanec za ozke dele (5 polj) Dedpjy Scl Tjfx Ac Njch s tračnim prislonom s Supercut predrezalno enoto Odsesovalna naprava v skladu z BG smernicami TRK (pod 2 mg finega prahu / m³ zraka) Razpoložljivost: takoj Mesto skladiščenja: 63934 Röllbach

Stanje: novo, Panel Saw HOLZ-HER 1255 SECTOR pro - Showroom Machine - Cutting Height: 2,200 mm Cutting Length: 5,300 mm Vertical Precision by HOLZ-HER HOLZ-HER's vertical panel saws combine proven technology from over 50 years of experience with a fundamentally robust construction, providing you with an exceptional price-performance ratio. Your advantages: - Completely welded frame for extremely high rigidity - Precise cutting quality - Finished cuts ready for immediate edge-banding - Powerful saw motor with 4 kW output - Space-saving panel sizing with a footprint starting at just 4 m² - Smooth and ergonomic operation TRK Extraction (mandatory in all CE-countries – optional): Workstations must meet the highest requirements for health and safety. HOLZ-HER saws are among the cleanest and safest in the world. Accessories The extensive range of accessories includes convenient digital measuring displays up to our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting board-shaped wood-based materials such as chipboard, MDF panels, veneered panels, multiplex, etc. Base Machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/saw unit for accurate cutting. Manual feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw Beam: Sturdy saw beam guided on precision rails. Pneumatic locking of the saw beam at top and bottom. Electrically monitored for vertical cuts. Saw Unit: Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded back in the upper position for precise engagement. Generously sized levers for easy swiveling. The cover opens the entire saw unit for quick tool changes, including ProLock quick-release chuck. View Slot: Riving knife can be retracted. Control Panel: Efficient machine operation. Ergonomically mounted at eye level. Lower Workpiece Support: Stable, wear-free stainless-steel support. Dcedpsu R Syijfx Ac Nsh Support up to cutting line: Narrow workpieces cannot tip or fall through. Extraction: Efficient extraction system with two connectors: Saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lift Roller Transport System: Manually liftable and lowerable rollers for easy and material-friendly panel transport. Measuring Tape: For indication of horizontal cut with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Serial cuts from the panel upper edge This offer is for an equipment package. The following items and options are included in the price: - Shifting grid - Manual longitudinal stop for vertical cuts - Digital measurement display for horizontal cuts - 3 adjustable stop points in the saw beam - TRK SH 2,200 extraction system - Strip stop for repeat horizontal cuts - New showroom machine -

Stanje: zelo dobro (rabljeno), Panelna žaga HOLZ-HER 1255 SECTOR pro - rabljena - Varjen okvir z izjemno visoko togostjo, pnevmatika pomična nosilna rešetka, stabilna pozicija žaginega vozička zgoraj in spodaj, elektronsko nadzorovano pozicioniranje pri vertikalnem rezu, zložljiva potopna ročica na žaginem agregatu, potni razcepljevalni klin za izreze, nadzorna plošča v višini oči, digitalni prikaz na vzdolžnem prislonu, Dodpfsy N Rihex Ac Nech digitalni prikaz za horizontalni rez, aprava za rezanje letvic, sistem transporta z dvižnimi valji, opora primerna za obrezovanje, posesalna naprava TRK, preskušeno na prah, uporabljena le 2 meseca ----- Tehnični podatki ----- Dolžina reza: 5300 mm, Višina reza: 2200 mm, Globina reza: 60 mm, Premer žaginega lista: 250 mm, Motor: 4 kW, Premer odsesovalne cevi: 120 + 100 mm, Stisnjen zrak: 8 bar, Letnik: 2025 Kvalitetne informacije: - popoln osnovni pregled - popolno osnovno čiščenje - takoj pripravljena za uporabo

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 Povsem avtomatski stoječi, Območje reza 5.300 x 2.200 mm (širina reza x višina reza), Premer žaginega lista: 300 mm, Krmiljenje za vertikalne in horizontalne reze, z ALU preklopnimi prisloni in ALU vmesno podporo, z napravo za predrezovanje SUPER-CUT Dcsdpfox Rr D Aox Ac Neh Motor 3 kW - 400 V Razpoložljivost: kratkoročno Lokacija: Röllbach

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma avtomatska visokohitrostna cevna krožna žaga Bewo. Območje premera okrogle cevi: 8mm-90mm, minimalne dimenzije kvadratnega profila X/Y: 10mm/10mm, maksimalne dimenzije kvadratnega profila X/Y: 80mm/80mm, podajalna hitrost: 50m/min-300m/min, premer rezila: 350mm, maksimalna zmogljivost: 8000 kosov/uro, maksimalna sočasna obdelava: 4 cevi. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dodpfxjy Nm Ume Ac Noch

Stanje: rabljeno, Leto izdelave: 2003, Stroj używany Rok produkcji: 2003 Maszyna zostanie całkowicie wyremontowana Wyposażenie i dane techniczne: Obszar cięcia: Długość cięcia: 4300 mm Wysokość cięcia: 2100 mm Głębokość cięcia: maks. 60 mm Dodpfx Asyxx U Dec Nsch Odciąg: Agregat piły: 120 mm Koniec ramy: 100 mm Podpora elementu obrabianego: Stabilna podpora z tworzywa sztucznego zapewniająca optymalne ustawienie również w przypadku wąskich elementów Wióry odprowadzane przez skośne szczeliny System transportowy z podnoszoną rolką: Ręczny, umożliwiający łatwy i delikatny dla materiału transport Pozycjonowanie: Ręczne, pionowe i poziome Posuw: Ręczny, pionowy i poziomy Tarcza tnąca: Węglik spiekany (HM), 250 mm, ząb naprzemian skośny, Z48 Silnik piły: 4 kW przy 5450 obr/min, 400 V, 50 Hz Szyna składana: z prowadnicą do wąskich elementów (4 pola) ze zderzakiem taśmowym Urządzenie odciągowe zgodne z wytycznymi BG TRK (mniej niż 2 mg pyłu drobnego / m³ powietrza) Wymiary: ok. 5.100 x 1.100 x 2.600 mm Waga: ok. 1100 kg Dostępność: do uzgodnienia Lokalizacja: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 1987, skupna dolžina: 4.300 mm, skupna širina: 1.350 mm, skupna višina: 2.550 mm, Barva: siva Teža: 1.250 kg - Leto izdelave: 1987 - Dokumentacija na voljo: Ne - Certifikat CE: Ne - Serijska številka: 1454/8-75 - Največja višina reza (vertikalno) [mm]: 1900 - Največja širina reza [mm]: 3300 - Minimalni premer žaginega lista [mm]: 100 - Horizontalno rezanje: Da - Vertikalno rezanje: Da - Transportne mere: 4300 mm x 1350 mm x 2550 mm (d x š x v) - Transportna teža [kg]: 1250 kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Navedená cena je brez DDV DDV/Obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkupi možni kadarkoli za vso industrijsko opremo Yorick Diebels Dodpsw Rm Injfx Ac Njch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, številka stroja/vozila: 3601, Premer žaginega lista: 300 mm Hitrost vrtenja lista: 2800 min⁻¹ Območje reza pri 90°: 70 x 120 oz. 50 x 140 mm Zareze za poševne reze levo in desno 15/22,5/30/45°, vmesne pozicije mogoče blokirati Pogonski motor: 380 V, 2,2 kW Dcedpsyh Hn Hefx Ac Neh Teža: 50 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Giben prečna žaga Leto izdelave: 2002 Nov računalnik vgrajen leta 2024 Rits 7 prijemalcev Transportne dimenzije: 4 paketi 7,5 m³ pribl. 5000 kg skupno Tehnični podatki Skupna dolžina žage: 665 cm Dolžina žaganja: 3700 mm Potiskalec: 3300 mm Dcjdpfox Huhiex Ac Njh Višina žaganja: 90 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Horizontal loading magazine, model HLM 4-strand timing belt conveyor 6 compartments, each 285mm wide, for profile storage; max. material height as per saw cutting range, round material max. diameter 130 mm 3 sliding rails between the belts as additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously adjustable speed Hydropneumatic saw blade feed, continuously adjustable from rear to front Control: Siemens S7-300 with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 – 1,000 mm (single stroke) Cutting slot extension on both sides Pneumatic unloading pusher Waste flap after the saw for offcuts / remnants Djdexvbvvepfx Ac Nech Cut-off length: profile-dependent, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for chip extraction Unloading: Table area: 1,500 mm x 2,500 mm Pneumatic cross pusher

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, • 350 mm maximum cutting height • 75-250 mm minimum/maximum cutting width • 100 – 350 mm minimum/maximum round timber diameter • 18-80 mm side board width • 1.8 – 6 m cutting length • 550 mm saw blade diameter • 4/6 simultaneous saw cuts • 5-30 m/min variable feed speed Dcodpfx Acjhkh Npe Noh • 2 x 30 kW and 2 x 22 kW saw motors • 3 kW SEW feed gearbox motor • Automatic 6-position width adjustment • Infeed table with 3-way turning device • 2 pairs of centering rollers with pneumatic pressure • Powered infeed roller with 0.75 kW motor and pneumatic pressure • 2 pairs of powered outfeed rollers, each with 0.55 kW motor • 4 pairs of pneumatic pressure rollers in outfeed

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, - 340 mm cutting height - 70–250 mm maximum cutting width - 500 mm pass-through width - 6000 mm feed length - 3–20 m/min feed speed - 2 x 30 kW saw motors - 1.1 kW feed motor Djdpehkh N Tofx Ac Njch - 0.25 kW width adjustment motor - 1300 kg weight

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation Djdpfx Aopa Nxdoc Nsch 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. Dcsdjidun Djpfx Ac Noh We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the scope of delivery! Dedpfogwt Rrsx Ac Nsch You are welcome to inspect the desired machine in our production/demonstration hall at any time. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood! Equipment • Precision under-table circular saw • Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º • including 2 pneumatic clamps (vertical) Djdpfxjgwt Rnj Ac Nech • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Chip extraction device for chip extraction system • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction system for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose Dodpfx Acjgwt Rys Nsch • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting. Features: • Precision underfloor circular saw • Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction system—chip extraction connection • Mist spray device for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Maximum cutting height 230 mm • Saw blade 600 mm • Saw blade not included! Dcedpfxsgcbwge Ac Noh You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (suitable for solid material to a certain extent). The machine stands out for its ease of use, fast and convenient material change, and simple mitre angle adjustment. The UK 500 HA offers a continuously adjustable mitre range from 30° to the left up to 0° to the right. The saw feed is automatically operated by pressing a button, while material clamping is achieved with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard configuration of this machine includes a minimal lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Features • Precision underfloor circular saw • Continuously adjustable mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device for suction unit • Air-oil mist lubrication unit • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! Dcsdpfxjgwt R De Ac Noh You are welcome to inspect the desired machine at any time in our manufacturing/demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° Dcedepa Nxaopfx Ac Neh - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (limited suitability for solid materials). The machine is characterized by its easy operation, quick and convenient material change, and simple mitre angle adjustment. The UK 800 HA offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is actuated automatically at the press of a button; material clamping is provided by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! The machine is also equipped with connections for a chip extraction system. Additionally, optional features include a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety hood. Equipment - Double mitre 20° – 90° – 20°, large support table - High-performance drive motor - Two-button control for saw activation (optional one-button control available) - Clear control panel - Adjustable blade feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter: 800 mm Dsdpfx Acoidun Ij Njch Workflow 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Move the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to ready the machine 7. Press and hold both SAWING buttons to initiate cutting 8. After the cycle, release both SAWING buttons and press the STOP button 9. Open the clamping vice and remove or advance the material You are welcome to inspect the desired equipment at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material possible to a limited extent). The machine stands out due to its user-friendly operation, quick and convenient material change, as well as easy mitre angle adjustment. The UK 352 HA offers an infinitely adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the press of a button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. As standard, the machine comes equipped with a minimum-quantity lubrication system and an air blow gun for machine cleaning! Connections for a chip extraction system are also available on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: 45º left / 90º / 45º right • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device interface • Mist spraying system for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH Dcsdpfx Acogwt Rvo Njh

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, AVTOMATSKA KROJILNICA ZA DESKE STROMAB MOD. TR600 – V SKLADU S CE NORMAMI - Vhodni valji 2 metra - Izhodni valji 2 metra - Št. 3 omejevalniki dolžine 250 mm - CE norme - Leto 2004 - Z navodili za uporabo in vzdrževanje + CE certifikat Dsdpfsx Rrp Ssx Ac Nsch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, • Schnitthöhe 2200 mm x Schnittlänge 4300 mm • Absaugung gemäß CE TRK-Richtlinien CH 2200 (weniger als 2 mg Feinstaub/m³ Luft) • Mittlere Werkstückauflage – 4 Zonen • Schiebeschlitten 1255 für Schnitthöhe 2200 mm • Sägeaggregat 4,0 kW, 5400 min⁻¹, 400 V, 50 Hz inkl. HW-Sägeblatt Ø 250 x 30 x 3,2 mm, Z 48, Hohl-Dachzahn • Längenanschlag (manuell) mit Digitalanzeige für Vertikalschnitte, für mittlere Werkstückauflage • Digitale Anzeige für Horizontalschnitte am Bedienfeld inkl. elektrischer Feineinstellung • 3 einstellbare Anschlagpunkte im Sägebalken für wiederkehrende Horizontalschnitte über Anschlagpunkt • Streifenanschlag für wiederholte Horizontalschnitte, Skala in mm, max. Streifenhöhe 650 mm • Schmale Teileeinrichtung (2 Stk.), verhindert Kippen der Werkstücke • Super Cut-Voranritzer: Zum Anritzen der Oberfläche beschichteter Materialien • Schnittoptimierung Opti-Base V-Cut 1 Stk. 10" Touchscreen Dodpfsy Nmtcex Ac Njch 1 Stk. Maschinensoftware 1 Stk. Bürosoftware – 1 Einzelplatz Floating-Netzwerklizenz (Opti V-Base) 1 Stk. Etikettendrucker • Technische Angaben dienen nur zur Information. Diese Maschine wird im Kundenauftrag angeboten. Besichtigung nach vorheriger Terminvereinbarung möglich. Bitte kontaktieren Sie uns über das Nachrichtensystem der Plattform für weitere Informationen und die entsprechenden technischen Ansprechpartner.