Grumbach Und Petermann Gmbh Paper Spike 2000 nakup rabljenega (77.713)

Leto izdelave: 2005, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Good day, Ljdpouanqaofx Al Ioab We are offering an OCC sorting plant consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, equipped with a discharge conveyor, Bollegraaf type HBGT 1200 x 4760 15°, and a single-deck fine star screen from Lubo Screening & Recycling Systems B.V. The machines have been disassembled down to the base frame, derusted, primed, and finally repainted. Defective shafts and rubber stars, the V-belts and spikes on the PaperSpike, as well as pneumatic cylinders, have been replaced. All bearings and drive chains were renewed, and the motors and gearboxes have been checked. Inspection is possible by prior arrangement. We accept no liability for technical data and possible errors. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: rabljeno, Mixing manifold for blending multiple tanks, available in various versions: - 1/2/3/4 sight glasses - pneumatically/manually operated valves - with or without frame - with or without castors - various sight glass sizes. Lodpfxew Dy E Uj Al Ioab Additional machine info: available in different versions.

Stanje: rabljeno, Leto izdelave: 1992, Storage cellar consisting of 8 upright tanks with temperature control. Additional equipment: coolable stainless steel tanks Lajdpfxevcqthj Al Iob Features: 8 storage tanks (6 x approx. 16,500 L, 2 x approx. 17,500 L), temperature control, control panel, blending manifold

Stanje: rabljeno, Leto izdelave: 1986, Stroj (dodatek): 3 hladilni rezervoarji Kapaciteta: 205 hl Obratovalni nadtlak: 0,3 bar Širina: cca 2,8 m Višina: cca 4,2 m Položaj: pokončno Lasdpfxjxbql Do Al Ieb Osnovna konstrukcija: na nogah Oprema: Moški odprtina; Hladilne cone; Dušilni aparat; Ventil za odvzem vzorcev

Stanje: rabljeno, Leto izdelave: 1997, stoječi cistern iz nerjavečega jekla s klobučastimi dnomi, hladilno cono na plašču, revizijsko odprtino, ventilom za odvzem vzorcev in centralnim iztokom. Stroj (dodatek): hladilni tlačni rezervoar Vsebina: 152 hl Delovni tlak: 5 bar Delovna temperatura: 20 °C Širina: pribl. 2600 mm Višina: pribl. 4000 mm Material: nerjavno jeklo Postavitev / pozicija: stoječe Osnovna konstrukcija: valjasta z klobučastimi dnomi. Postavljen na 4 kvadratnih nogah Ljdpfx Aoxbqlqsl Ioab Oprema: hladilna spirala (plašč, 5,1 m², 1 bar, 84 l, glikol), revizijska odprtina, iztok DN65 z ročnim loputnim ventilom, vakuumski ventil DN32, varnostni ventil DN25, opazovalno steklo, ventil za odvzem vzorcev DN10, CIP cev DN40 s pršilno glavo DN25, indikator nivoja z uporabo cevi, priključek za kvas, manometer, dvigalne sponke, lestevni obroč

Leto izdelave: 1988, stanje: rabljeno, Machine (Additional Information): Stainless steel tanks with temperature control Lasdpfx Aevcqg Iol Iob Total capacity (gross): 904 hl Material: Stainless steel Equipment: 3 fermentation tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl), integrated temperature control system (Nerb)

Stanje: rabljeno, Leto izdelave: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tanks 1-3: C. Gresser, 1986, gross volume 20,460 liters each. Tanks are mounted on four legs and each feature two shell cooling zones, dished ends (Klöpperböden), and central outlet. Equipment per tank includes: safety valve, cleaning line, CIP spray head, sampling tap, manway in the shell, and sight glass in the tank dome. Lsdpfx Aevcq Dtsl Ieab Tank 4: C. Gresser, 1986, gross volume 11,569 liters. Tank is mounted on four legs with shell cooling, dished ends, and outlet line. Equipment: cleaning line, CIP spray head, sampling tap, manway in the shell. Additional machine data: Coolable stainless steel tanks 3 tanks of 20,500 liters each 1 tank of 11,600 liters Material: stainless steel Mounting/position: standing on four legs Equipment: cooling jackets, cleaning lines, CIP spray heads, outlet lines, safety valves, sampling taps, manways, and sight glasses

Leto izdelave: 1992, stanje: rabljeno, Stroj (dodatek): 6 hladilnih rezervoarjev Kapaciteta: 164 hl Obratovalni nadtlak: 0 bar Širina: ca 2,05 m Višina: ca 6,2 m Položaj / postavitev: Pokončno Laedpfjw Tmqzox Al Iob Osnovna konstrukcija: Na nogah Oprema: Človekova odprtina, 2 hladilni coni, ventil za vzorčenje, varnostni ventil z indikatorjem tlaka, vakuumski ventil.

Leto izdelave: 1991, stanje: rabljeno, 6 upright stainless steel tanks with dished ends, cooling jacket, manway, sampling valve, insulation, and central outlet. Purchase of individual units or subsets is possible. Machine (additional info): stainless steel tanks with temperature control Total volume: 2,429 hl Lsdpsvcquljfx Al Ieab Max. pressure for 4 tanks: 0 bar (non-pressurized) Max. pressure for 2 tanks: 5 bar Material: stainless steel Configuration/position: upright tanks Base construction: cylindrical with dished ends, supported on 4 square-section legs Equipment: 4 storage tanks (approx. 445 hl each), 2 pressure tanks (320 hl each), manway in the shell, 1 shell cooling zone, insulation with sheet metal cladding Peripheral equipment: integrated temperature control system

Leto izdelave: 1990, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, For sale is a robust and operational roll forming machine for the production of corrugated and tile-profile panels made from aluminum. The system is suitable for the continuous manufacturing of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and stands out due to its solid industrial construction. Thanks to the integrated profiling line, cutting and embossing tool, as well as the automatic stacking system, an efficient production process from coil to finished profile is ensured. The system is specifically designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, offering a wide range of applications in sheet metal processing and profile manufacturing. System components: - Decoiler - Profiling line - Cutting and embossing tool - Automatic stacking unit Lodpfx Alsy Sxhws Ioab Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugation 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm, and 1.0 mm Condition & Inspection: The system is ready for production, in operational condition, and is currently still in use. Functionality can be verified on-site if interested. The roll former can be inspected at any time by prior arrangement at our location in Krostitz, Hilchenbacher Straße 2A. The system is immediately available and ready for sale. Further technical information, images, or details will be provided upon serious inquiry.

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Laodpfx Ajy Aldael Iob

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Speidel Tank- und Behälterbau Year of manufacture: 2020 Lodpfx Ajy I Skwol Ioab Technical data: Usable capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket / insulation jacket) Internal surface: suitable for food and pharmaceutical applications Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: present Bottom: conical (complete drainage) Feet: height-adjustable Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP (Clean-in-Place) tank in a pharmaceutical facility and operated under hygienic conditions accordingly. Typical applications include: - Intermediate storage of bulk goods - CIP feeder tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Construction: - High-quality stainless steel design (316L) - Insulated vessel for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage - Industrial-grade execution by German manufacturer Speidel Condition: - Very good condition - Used, well-maintained - Immediately available FAT / Documentation: - Operating manual available - Manufacturer documentation available Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operating manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as CIP feed or buffer tank - Compact design with high quality

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov stroj LOWA GmbH Abfüll- und Verschließsysteme WK12-17 za polnjenje in zapiranje steklenic, letnik 2025. Lasdpeyybh Asfx Al Ijb Proizvajalec: LOWA GmbH Abfüll- und Verschließsysteme Model: Zapiralni stroj WK12-17 Tip stroja: Stroj za polnjenje in zapiranje steklenic Letnik izdelave: 2025 Stanje: novo ID kategorije: 679 Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Leto izdelave: 2026, stanje: novo, A block-mounted sweeper broom KehrFix is being offered in various versions, ranging from 1.50 m to 4.00 m in width. A suitable mounting system needs to be discussed separately if required (e.g. pallet fork mount, bucket hook, or Euro mount). This block-mounted sweeper is designed for use with forklifts, wheel loaders, tractors, mini loaders, mini dumpers, and many other vehicles and machines! Equipped with a variety of mounting options for quick attachment to numerous vehicles, the KehrFix is the ideal solution for maintaining cleanliness over large areas. Laedpfeh T A Tnjx Al Ieb KehrFix push brooms are a professional choice for effortless and effective sweeping and cleaning. The robust KehrFix has been engineered to complete these tasks quickly and thoroughly across all conceivable application areas. KehrFix push brooms are high-quality, durable, maintenance-free, and universally applicable sweeping systems.

Leto izdelave: 2014, stanje: dober (rabljeno), Technical Data – Condenser Maximum volumetric flow rate: 300 m³/h Laedscpwhbepfx Al Ieb Condenser overall dimensions (as delivered): approx. 430 mm x 1610 mm (height) Cylindrical section: approx. Ø 273 mm Weight of chamber (as delivered): approx. 80 kg Upper section volume (condenser): approx. 30 L Lower section volume (reservoir): approx. 28 L Elastomer material: NBR / FKM / PTFE Maximum condenser temperature: 1 to 80°C Maximum condenser vacuum: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!) Maximum heat exchanger temperature: 1 to 80°C Working medium (heat exchanger): Water Maximum heat exchanger water pressure: 10 bar Heat exchanger material: Tin-plated copper Condenser material: Stainless steel For technical inquiries or other sizes, please contact us.

Stanje: rabljeno, The insolvency administrator offers for sale: The AMI Förder- und Lagertechnik GmbH manual sorter consists of, among others: – Three packing lines, each 30 meters long, with roller racks arranged on both sides along each line – Pneumatic belt and roller conveyor system with integrated scanners – Meler Micron 5 – piston pump glue application unit – Multibox PCX 1816 carton forming/packaging machines, year of manufacture 2007, manufactured in France – 2 units – Logopak 510+ III TB labeler (SN PE00026247), year of manufacture 2018 – APS 10D screw compressor, 10 bar (2 units) – manufactured in 2017 – APX 24 air dryer – working pressure (bar) 13, year of manufacture 2009 – Komnino KP-1000-11/0.8 pressure vessel – year of manufacture 2014, serial number 1569 – Bizerba labeling system – Roller conveyor line – Conveyor line with 7 accumulation zones, each allowing up to 4 workstations, with exit to 10 outbound ramps Lasdpfx Aswaxw Ijl Iob The entire system has been professionally dismantled by a specialist company, placed on pallets, and is ready for transport.

Stanje: novo, Leto izdelave: 2024, Facility managers and property management companies are well aware of the challenge: On collection day, when the refuse collection vehicle arrives, all bins must be positioned at the pick-up point. If waste containers are typically stored in the underground garage, the caretaker must transport every bin up the ramp. This process is time-consuming, physically demanding, or sometimes simply impossible for one person. A 240-liter waste bin filled with compacted paper can weigh over 200 kg, while a 1,100-liter waste container can exceed one ton. In such cases, the caretaker needs a second person’s assistance, which increases labor costs. Weber offers time- and health-saving solutions for this issue. Contact us about our bin frames for 1,100-liter waste containers and our trolley systems for 120- and 240-liter waste bins. And of course, we also supply battery-powered towing vehicles. - Health-friendly - Efficient - 400 kg payload Lajdpfx Aji Nnrusl Ieb - Galvanized - Interconnectable - Professional equipment – not suitable for public road traffic Adapters: - Ball hitch - Drawbar eye

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Na prodaj je naprava za pretakanje goriva. Ogled je možen po predhodnem dogovoru. Proizvajalec: GL GmbH Metall- und Werkstattechnik − Tip: 100/100 S − Serijska številka: 3448 − Leto izdelave: 08/2017 − Tehnični podatki: > Prostornina rezervoarja: 100 litrov > Pretok: 15 l/min > Teža: 92 kg > Kazalec nivoja: optični > Mobilnost: premičen > Preklop sesanje/povratno tankanje: enoročno upravljanje/krogelni ventil Ledpfx Asxt H Ilsl Isab > Menjava rezervoarja: ročna

Stanje: rabljeno, Odstranjevalec oljne megle, separator emulzijske megle, rabljeni stroj Proizvajalec: IFS Industriefilter Service GmbH Tip: IFM 2000 Skupne mere: Širina: 1170 mm Globina: 700 mm Višina: 1100 mm Teža: 136,5 kg Leto izdelave: 1995 Električni podatki: 400V, 1,5 kW, 3,2 A Velikost filtra: 605 x 615 mm Lsdpjyn Rmiofx Al Ioab

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Complete module for supplying two welding workstations, including integrated welding fume extraction from Teka (welding fume separation class W3, with automatic filter cleaning) for steel. Mobile unit. Small devices (Bosch, Makita or Milwaukee) can be mounted on the holder (see image 4). Alternatively, extraction systems from other brands such as Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and others can also be installed (additional charges apply). Lasdpfouud Irex Al Ijb Delivered fully assembled, including: - 1 frame - 2 AGA 2020 extension arms - 1 tool cabinet - 1 gas cylinder holder - 2 electrical cable reels - 2 compressed air hose reels The welding workstation is suitable for TIG, MIG and MAG welding units from Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in images 5 & 6 can be purchased separately. Currently, a demo unit and a used welding workstation (SAP) are available. We look forward to your inquiry!

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 13.500 kg, premer rotorja: 470 mm, dolžina elektro omare: 2.800 mm, širina krmilne omare: 600 mm, višina krmilne omare: 2.100 mm, dolžina rotorja: 2.000 mm, moč: 220 kW (299,12 KM), največja hitrost vrtenja: 80 obr/min, širina odprtine za polnjenje: 1.650 mm, dolžina polnilne odprtine: 2.060 mm, perforacija sita: 50 mm, vhodna napetost: 400 V, Najzmogljivejši model: Micromat 2000 V2 Pogonski motor: 2 x 110 kW, 400 V/50 Hz Krmilna omara: kompletna s frekvenčnim pretvornikom Hitrost rotorja: pri 50 Hz cca 80 obr/min Rotorski noži: 104 kos, novi Oblika rotorskega noža: 43x43x19,5 mm Vstopna odprtina (D x Š): 2030 x 1650 mm Dolžina rotorja: 2030 mm Krog rotorjevega premera: 560 mm Strgalo: da Protinov: da Hidravlična enota: kompletna Hidravlični cilinder za sito kaseto: sita 50x50 mm Skupna teža cca 13,5 t Dimenzije (D x Š x V): cca 6500 x 2970 x 2660 mm Ogled in preizkus možen po dogovoru. Ledpfjyxxk Sex Al Ieab Vključno z lijakom Dobavni rok: takoj

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 5t z baterijskim pogonom za peskalno napravo - Nosilnost 5t - Za tirni sistem - Baterijski pogon Lajdpoyyxidofx Al Isb - Daljinsko upravljanje - Dimenzije: dolžina 3000 mm, širina 1000 mm - Površine za namestitev držal za obdelovance

Stanje: rabljeno, Leto izdelave: 2018, Pregled Ti fermentacijski rezervoarji (Iso-Tank) so bili izdelani leta 2018 pri nemškem proizvajalcu BrauKon GmbH. Sistem sestavljajo 3 fermentacijski rezervoarji, namenjeni fermentaciji piva. Rezervoarji so še vedno nameščeni, priključeni na električno omrežje in takoj na voljo. Oprema si je po dogovoru mogoča ogledati v obratovanju. Tehnični podatki Prostornina: vsak po 10 hl Uporaba: fermentacija piva Konfiguracija: 3 × Iso fermentacijski rezervoarji. Lajdjywn Svepfx Al Ijb

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" Lasdpfxow U N Ixe Al Iob • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Leto izdelave: 2008, obratovalne ure: 470 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Yxlon MU 2000, Yxlon MU 2000 Typ Industrie-Röntgenprüfanlage mit 160 kV Ausgangsleistung: Die Anlage wurde 2020 komplett generalüberholt. Das Flachdetektorpanel sowie sämtliche Achsantriebs-Elektromotoren wurden ebenfalls ersetzt! Das Bleiglas-Beobachtungsfenster mit Sicherheitsverriegelung lässt sich beidhändig öffnen, sodass Werkstücke ohne Unterbrechung der Strahlenquelle eingelegt werden können! Die Werkstücke lassen sich mittels eines Fünf-Achsen-Manipulators positionieren. Die Bewegungsabläufe sind programmierbar, was den Arbeitsprozess beschleunigt und die Auswertung präziser macht. Eine manuelle Verstellung zur Inspektion ist ebenfalls möglich! Werkstückgröße und -gewicht: - Durchmesser: 400 mm - Länge: 900 mm - Gewicht: 60 kg Kabinenmaße: 2200 x 2700 x 1800 mm Gewicht: 4000 kg Computersteuerung Die Maschine positioniert den Prüftisch sowie Neigungswinkel und Höhe des C-Arms automatisch gemäß dem auf Basis der zu prüfenden Bereiche erstellten Programm. Dadurch kann die Anzahl der pro Serienprüfung testbaren Teile signifikant gesteigert werden. Mehrere Bauteile können gleichzeitig in die Kabine geladen werden und werden nacheinander, nach Programmierung, inspiziert. Laodpfxju Hzvxj Al Ieb MG 165 Röntgengerät Y.TU-160 D 06 Metall-Keramik-Röntgenröhre zur Detektion kleinster Fehler in Stahl- oder Aluminiumguss sowie -teilen - Fokusgröße: 1,0/0,4 mm - Prüfspg.: 8–160 kV, Leistung 1,00/0,64 kW - Geschlossenes Wasserkühlsystem WL3002 - Durchstrahlbare Materialstärke: Stahl 35 mm, Aluminium 45 mm XRD Flachdetektor - Aktive Fläche: 200 x 200 mm - 512 x 512/400 μm/30 fps oder 1024 x 1024 Pixel/200 μm/15 fps Auflösung - Spezielle Framegrabberkarte - Y.T24.CD01, 24″, 1920×1200 Pixel, Farb-TFT-Monitor - Belastbarkeit: 160 kV Steuerpult: - MGC 41 Steuerpult - Manipulatorsteuerung (Joystick) - Türsteuerung, Drucktasten (beidhändig) - Steuerung der Bildverarbeitung - Digitale Bildverarbeitungssoftware - Bildarchivierung - Bildbeschriftung - Bildvergleich mit Referenzbild - Zoomfunktion - Schwarzblendensteuerung - Leistungsstarke Grafikkarte + Framegrabber + Auswerte-PC - Mess- und Kalibrierfunktionen - Windows-Betriebssystem - DICONDE-Datenformat