Gressel Kotni Upogibnik nakup rabljenega (432)

Stanje: zelo dobro (rabljeno), Delovna višina: 100 mm Ploščato jeklo: 100 x 10 ali 80 x 12 ali 30 x 20 mm Kvadratno jeklo: 22 mm Okroglo jeklo: 25 mm Kotno jeklo: 100 x 10 mm Aluminijaste ploščate palice: 100 x 30 mm Kdedpfx Aoydbfhobxon Potreben prostor: 500 x 600 mm

Stanje: rabljeno, Mehanski visokotlačni strojni primež GRESSEL tip MHS 125-3b Visokotlačni vpenjalec Širina čeljusti: 125 mm Višina čeljusti: 40 mm Odprtje: 203 mm Vpenjalna sila: 2 / 3 / 4 tone Kdsdpfjy Ra Ddox Abxen Višina vodila: 62 mm - Vpenjalna sila nastavljiva v 3 stopnjah - Visokotlačni vpenjalec z mehanskim povečevalcem sile - Razpon vpenjalca nastavljiv v 4 stopnjah - 1 kompenzacijska čeljust, tip 180, širina čeljusti 125 mm - Stranski navoj za omejilnik obdelovanca Mere: 440 x 140 x 102 mm Teža: 28 kg

Stanje: rabljeno, Jaw width: 125 mm Clamping range: 220 mm Kdsdpfx Abeu Sh Hujxjn

Stanje: dober (rabljeno), številka stroja/vozila: 897, Jaw width: 160 mm Jaw height: 50 mm Clamping range: 280 mm Kedpfsb Dimvsx Abxedn Overall height: 130 mm

Stanje: rabljeno, skupna masa: 221 kg, skupna dolžina: 400 mm, skupna širina: 400 mm, skupna višina: 540 mm, Križni blok z Gresselom Pritrdilne luknje: 4 Kdedpfx Abeywy U Nexen Luknje za razdelitev: 320 mm Dolžina: 400 mm Širina: 400 mm Višina: 540 mm Teža: 221 kg Za dodatna vprašanja o stroju smo vam na voljo po telefonu ali e-pošti. Oglejte si tudi naše druge oglase za popoln pregled naše zaloge.

Stanje: rabljeno, Mehanski visokotlačni strojni primež GRESSEL tip MHS 126-3 Visokotlačni vpenjalnik Širina čeljusti 125 mm Kodjxlkvdjpfx Abxedn Višina čeljusti 40 mm Odpiranje čeljusti 221 mm Vpenjalna sila 2 / 3 / 4 tone Višina vodila 62 mm - Vpenjalna sila nastavljiva v 3 stopnjah - Visokotlačni vpenjalnik z mehanskim ojačevalcem sile - Razmik vpenjanja nastavljiv v 2 stopnjah - Stranski navoj za omejevalnik obdelovanca Mere 440 x 140 x 102 mm Teža 26 kg

Leto izdelave: 2022, stanje: novo, angle: 0° - 90° maximum cutting length: 1,370 mm Kdjdjzdzawjpfx Abxon

Leto izdelave: 2009, stanje: zelo dobro (rabljeno), MASS NC Inclined Conveyor / Angle Conveyor Angled conveyor belt with base frame Conveyor belt length: 1,500 mm flat section + 1,500 mm inclined section. Discharge height: approx. 1,400 mm. Description: Available immediately, Ready for shipment, multiple units available Belt speed: 7 m/min T 30 cleats, welded, cleat height 30 mm Drive: 0.37 kW, 380V, 50Hz Height-adjustable angled conveyor belt with adjustable angles Infeed section: 1,500 mm Incline section: 1,500 mm Usable width: 850 mm Cleat height: 30 mm Belt speed: 7 m/min Standard control panel with emergency stop / stop button Overall width: 950 mm (excluding motor) PU belt Color: green L-type cleats Cleat spacing: approx. 450 mm Kdodpepby Urofx Abxjn Cleat height: 30 mm Standard control panel with emergency stop / stop button Mounted on swivel castors with brakes Side guide plates in the infeed section

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Manufacturer: Crizaf Kdjdpspccyfefx Abxen Length: 430–1950 mm Height: 1450 mm Conveying speed: 3.5 m/min Belt width: 395 mm Height: 750 mm Frame material: aluminium, feed hopper made of stainless steel Foot switch start Power: 0.18 kW, 400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set: Kjdpfxsfzzhye Abxsdn - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Complete solution for transporting bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminum angled conveyor belt including substructure Horizontal section: 2,500mm (adjustable) Inclined section: 5,000mm (adjustable) Bend angle: 35°, 40°, or 45° Loading height: horizontal (customizable) Discharge height: individually adjustable Frame: height-adjustable (mobile) Kdjdpfei Igdfjx Abxsn Conveyor belt width: 500mm (adjustable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt incl. cleats and corrugated sidewalls Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive, etc. ready to connect, motor control optional 8x adjustable machine feet for alignment Corrugated sidewall: 50x25mm T-50 cleats – 400mm pitch 2-ply, particularly cross-stable Fixed overband magnetic separator: Permanent overband magnetic separator TYPE PM1200 Manufacturer: die magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic area: L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for a custom system is currently around 2–3 weeks, depending on production effort. Our core competence is delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and supply the corresponding systems from our own production. Feel free to contact us by phone as well to find a suitable solution for your application. Conveyor, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angled conveyor belt including mobile underframe Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at the bend: 40 degrees each Feed height (measured from floor): 500 mm Discharge height: 1,600 mm Conveyor belt width: 700 mm Extremely robust aluminum construction, heavy-duty version! PU conveyor belt including cleats and corrugated sidewalls Drive: 0.55 kW motor (adjustable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and electrical components ready for connection, motor control optional Corrugated sidewalls: 80x50 mm T-60 cleats, short pitch 2-ply, particularly cross-rigid Corrugated sidewalls, cleats, and endless belt high-frequency welded In the bend area, the belt is guided on both sides by four hold-down rollers each. The belt is designed with a 100 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width: 400 mm, calculated as follows: Kjdjyt Ia Djpfx Abxedn (top view) Transverse layout 100+50+400+50+100 mm Demonstration unit - Available immediately! - Can be inspected under power All prices are net prices plus 19% VAT All information subject to change, while stocks last!

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Aluminum angle conveyor with substructure Horizontal section: 3,000 mm Inclined section: 5,000 mm Angle of inclination at bend: 35°, 40°, or 45° Total conveyor length: - Discharge height: - Kdsdpfx Aoi Igzfjbxjn Height of horizontal section: - Conveyor belt width: 600 mm (extendable) Drive roller + return roller Ø150x620 mm, S235 steel, welded and machined Steel return roller at bend mounted and crown-turned Reinforced aluminum profile frame 135x45 mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge, petrol matt Drive: 1.1 kW motor, speed 0.3 m/sec Connection 230/400V, 50 Hz, protection class IP54 Fully wired drive unit with motor 2 pcs. corrugated sidewalls 80x45 mm 39 pcs. T60 carriers, spacing 401 mm 2-ply, extra cross-stable Usable width 470 mm, calculated as follows: Transverse arrangement -70+45-50+470+50+45-70 mm

Leto izdelave: 2021, stanje: novo, Aluminium angle conveyor belt including substructure Horizontal section: 2000 mm (adjustable) Inclined section: 2200 mm (adjustable) Angle at joint freely selectable: 30°, 35°, 40°, or 45° Kdodpohh A Thsfx Abxjn Conveyor belt width: 500 mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt including cleats and wave edge Drive: Motor 1.1 kW (adjustable), speed 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and accessories prewired, motor control available as an option 6x adjustable machine feet for alignment Wave edge: 40x35 mm (adjustable) T-20 cleats – 400 mm spacing (adjustable) 2-ply, especially cross-stable Our core competence is delivering precisely what the customer really needs. We work closely with our customers to develop customised, individual solutions and deliver suitable systems from our own production. Feel free to contact us by phone to find the right solution for your application. Belt conveyor, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator

Leto izdelave: 2022, stanje: novo, Complete solution for conveying bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angle conveyor belt including supporting structure Horizontal section: 2,500 mm (customizable) Inclined section: 4,000 mm (customizable) Bend angle steplessly adjustable Feed height: horizontal (customizable) Discharge height individually adjustable Construction: height-adjustable (movable) Conveyor belt width 600 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt with cleats and corrugated sidewall Drive: 1.1 kW motor (customizable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive supplied ready for connection, motor controller optional 8x adjustable machine feet for alignment Corrugated edge: 50x30 mm T-40 cleats - 300 mm pitch Kdsdoilg U Espfx Abxon 2-ply for maximum cross-stability We always have various systems of this type in stock. The lead time for a customized system is currently around 2–3 weeks, depending on the production effort. Our core competence lies in supplying customers exactly what they really need. We work together with our customers to develop customized, individual solutions and supply the corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Leto izdelave: 2023, stanje: novo, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 3,750 mm Inclined section: 3,200 mm Incline angle at the bend: 45° Total conveyor length measured on the ground: 6,000 mm Discharge height: 2,500 mm Height of the horizontal section: 250 mm Design features: - Aluminum modular construction - Double-reinforced profile 90x45 mm - Drive roller & return roller: S235 steel, welded and machined - Ø100x520 mm, crowned, shaft secured with bearing units Drive: - Shaft-mounted geared motor 0.55 kW, conveyor speed 0.3 m/sec - Connection: 230/400 V, 50 Hz, protection class IP54 - Drive pre-wired up to the motor terminal box (commissioning must be performed by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC incl. PVC wavy edges, green Belt width: 500 mm 2 pcs. wavy edges, 40 mm high x 35 mm wide, high-frequency welded 46 pcs. T-40 cleats, approx. 300 mm pitch Belt material: 2-ply, extra cross-rigid In the angled section, the belt is guided on both sides with 3 hold-down rollers each. The belt is supplied with a 70 mm edge-free zone on each side. Due to the wavy edges on both sides, the usable belt width is reduced: Usable width: 290 mm, calculated as follows: (top view) crosswise: 70 + 35 + 290 + 35 + 70 mm Our core competency is delivering exactly what the customer truly needs. We work together with our customers to develop tailored, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Ksdeht Uzaepfx Abxodn Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Leto izdelave: 2021, stanje: novo, Aluminium angle conveyor belt including substructure Kdodpfxsht Ux Ae Abxsn Horizontal section: 1500mm Inclined section: 2500mm Angle at bend: 35° Conveyor belt width: 400mm PVC conveyor belt including carriers and corrugated edge Drive: Motor 0.55kW (adjustable), Speed approx. 0.3m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Corrugated edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply, particularly cross-stable

Leto izdelave: 2022, stanje: novo, številka stroja/vozila: 2022022209, Aluminium angle conveyor with substructure Conveyor length: 1500mm horizontal + 4000mm inclined Incline angle at joint: 45° Discharge height: approx. 3000mm Height of horizontal upper edge: 200mm PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC green Belt width: 400mm T30 cleats welded - pitch 300mm * Antistatic thanks to threads in the running side fabric Endless welded with stepped finger joint 40mm corrugated edge welded both sides using high-frequency welding * Clearance zone on both sides for belt guidance on the incline Crosswise arrangement: -70+35-5+180-5+35+70 Full-surface support plate Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec Kdsdpfx Ajh Elhzobxjn * Optionally controllable via frequency inverter Connection 220/400V, 50Hz, protection class IP54 Including suspension construction for mounting an overband magnetic separator in the horizontal section.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 20244051202, Aluminum Angle Conveyor with Subframe including adjustable leveling feet and machine mounts to compensate for uneven surfaces Horizontal section: 1,500 mm Inclined section: 2,100 mm Incline angle at bend: 45° Discharge height: 1,700 mm Aluminum Construction - Reinforced double profile 90x45 mm Drive: Inline geared motor 0.55 kW, speed 0.3 m/sec Connection: 230/400V, 50Hz, protection class IP54 PU conveyor belt with corrugated sidewalls & cleats Belt width: 600 mm 2 pieces of corrugated sidewalls, height 50 mm, width 25 mm 24 pieces of T-40 cleats Belt material: 2-ply, particularly cross-stable Permanent Overbelt Magnetic Separator Kdedpsg At Hbefx Abxon TYPE PEM1200 1200 x 550 x 200 mm 4x lifting eyes for suspension Drive: Inline geared motor GEMOTEG 0.18kW, speed 0.4 m/sec Connection: 400V, 50Hz, protection class IP54 Endless PU conveyor belt 7 x T20 cleats, high-frequency welded Magnet dimensions: 700 x 230 x 120 mm Our core competence is delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own manufacturing. Contact us by phone as well to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overbelt magnet, magnetic belt separator

Leto izdelave: 2023, stanje: kot nova (razstavni stroj), Aluminum angle conveyor with substructure, including adjustable feet and machine leveling feet. - Horizontal section: 2,500 mm - Inclined section: 800 mm - Incline angle at bend: 40° - Total conveyor length: 3,100 mm - Discharge height: 700 mm - Height of horizontal section: 320 mm PU conveyor belt DM 10/2 0+005 PU, incl. wave edge, petrol matte Drive: Motor 0.55 kW, speed 0.3 m/sec Connection: 230/400V, 50Hz, protection class IP54 Kedsk Scxispfx Abxedn Drive and peripherals ready for connection, motor included 2 pcs. wave edge 80x45 mm 2-ply, especially laterally stable Usable width: 370 mm

Leto izdelave: 2023, stanje: novo, Complete solution for the transport of bulk materials such as shredder material, wood chips, wood pellets, granulate, etc. Aluminum angle conveyor including substructure Horizontal section: 2,500 mm (customizable) Inclined section: 4,500 mm (customizable) Angle at bend: 35°, 40°, or 45° Infeed height: horizontal (customized) Discharge height: individually adjustable Design: height-adjustable (moveable) Conveyor belt width: 800 mm (customizable) Our conveyor belts are available in PVC, PU, felt, or rubber. PU conveyor belt with cleats and corrugated sidewall Drive: Motor 1.1 kW (customizable), speed approx. 0.3 m/sec Power supply: 220/240V, 50Hz, IP54 protection rating Drive system comes ready for connection, motor control optional 8x adjustable machine feet for alignment Corrugated sidewall: 50x25 mm T-50 cleats – 400 mm pitch 2-ply for increased lateral rigidity Permanently installed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: die magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200 mm Magnetic area: 700 mm x 250 mm Gear motor: 0.37 kW We always have various systems of this kind in stock. The current lead time for a customized system is approximately 3–4 weeks, depending on manufacturing requirements. Our core competence lies in delivering exactly what the customer truly needs. We work closely with our customers to develop customized, individual solutions and supply appropriate systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Kedpok S D Nljfx Abxodn Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overbelt magnet, magnetic belt separator

Stanje: rabljeno, številka stroja/vozila: 008402, Najv. širina plošče: 4300 mm Najv. dolžina plošče: 2500 mm Kodjygtbmjpfx Abxedn Najv. izstop glavnega žaginega lista: 110 mm Število vzdolžnih vpenjal: 9 Število prečnih vpenjal: 4

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Stroj je popolnoma funkcionalen, opremljen z orodji za lesena in les-alu okna – vključite in začnite delati. Kjdszchaispfx Abxsdn

Stanje: novo, Leto izdelave: 2018, Avtomatski kotni varilec Proizvajalec: Diez Tip: AWS4535 Kedpfx Abswriuuoxodn Leto izdelave: 2018 Brez delovnih ur! Varilni okvir: 500 x 350 mm Širina traku: 32 mm Zunanje dimenzije: 170 x 130 x 135 cm 3626ä

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Unicontrol 12 Includes: Cross-cutting unit (Pos. A), Tenon and slot spindle (Pos. C), Transfer belt (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling unit right (Pos. P) For the production of individual parts and elements in frame-based or serial manufacturing processes. Consists of a cross-processing unit and a longitudinal processing unit, connected by a transfer belt. Working width: 40–140 mm (see pressure guide left 40–140 mm) Working height: 40–120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal processing: approx. 220 mm + 2 x end profile length Workpiece length max.: 3500 mm Workpiece dimensions are dependent on machine configuration, manufacturing method, and tool assignment. Final definition of the part dimensions is only possible after receipt, review, and approval of the complete and finalized tool layout drawings. Cross-machining: Table feed motor power: 0.3 kW (0.4 HP) Pre-set feed speed during cutting, profiling, and return: 3–25 m/min Vario table with (studio window production possible) The clamping length of all tenon and slot spindles can be used without tool changeover slots. Workpiece clamping by means of a clamping bridge. Operated by clamping cylinders mounted under the table. Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° The minimum workpiece length for angled windows depends on the angle and the wood width. Kdsdpoumci Sefx Abxon Possible part dimensions when manufacturing angled windows: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter-processing is possible. Commission not documented. 1) NC angle adjustment automatic for angled part processing Tear-out protection via follow-up counter over the complete spindle length of the tenon and slot spindle for 90°processing. Manually adjustable counter wood strip for angled part processing. 2) Additional counter woods