Visokotlačna objemka

GRESSEL

Stanje: rabljeno, skupna masa: 221 kg, skupna dolžina: 400 mm, skupna širina: 400 mm, skupna višina: 540 mm, Križni blok z Gresselom Nedpfx Aex Ttzzsbbscl Pritrdilne luknje: 4 Luknje za razdelitev: 320 mm Dolžina: 400 mm Širina: 400 mm Višina: 540 mm Teža: 221 kg Za dodatna vprašanja o stroju smo vam na voljo po telefonu ali e-pošti. Oglejte si tudi naše druge oglase za popoln pregled naše zaloge.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Fanuc 21T control Turning diameter: 158 mm Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm 8-position turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Ncedpjwmzhpjfx Abbol Various tool holders

Stanje: rabljeno, Mehanski visokotlačni strojni primež GRESSEL tip MHS 126-3 Visokotlačni vpenjalnik Širina čeljusti 125 mm Višina čeljusti 40 mm Odpiranje čeljusti 221 mm Vpenjalna sila 2 / 3 / 4 tone Višina vodila 62 mm - Vpenjalna sila nastavljiva v 3 stopnjah - Visokotlačni vpenjalnik z mehanskim ojačevalcem sile - Razmik vpenjanja nastavljiv v 2 stopnjah - Stranski navoj za omejevalnik obdelovanca Ncjdsxlkvdopfx Abbjl Mere 440 x 140 x 102 mm Teža 26 kg

Stanje: rabljeno, Mehanski visokotlačni strojni primež GRESSEL tip MHS 126-3 Visokotlačni vpenjalec Širina čeljusti: 125 mm Višina čeljusti: 40 mm Odpiralna širina: 177 mm Vpenjalna sila: 2 / 3 / 4 toni Višina vodilne steze: 62 mm - Vpenjalna sila nastavljiva v 3 stopnjah Ncsdjxf U Ahspfx Abbel - Visokotlačni primež z mehanskim ojačevalcem sile - Vpenjalna širina nastavljiva v 2 stopnjah - Stranski navoj za omejevalnik obdelovanca Dimenzije: 440 x 140 x 103 mm Teža: 26 kg V dobrem stanju

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-230 Item No. 05.833/00 Year of Manufacture: 1969 Trough Diameter: 1,100 mm Total Trough Height (external): approx. 650 mm Processing Tank / Gross Volume: max. 230 liters Nedpfx Ajfqpxisbbecl Usable Volume: approx. 115 liters Rotational Speed: 1,100 to 1,800 rpm, infinitely variable Motor Power: 7.5 kW Mains Connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator gearbox - Manually adjustable eccentric imbalance weights - Tank with polyurethane lining (lining partially damaged or worn) - Soundproofed cover - Manual separation flap - Integrated screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1,800 x 1,750 x 1,700 mm Net weight: approx. 1,800 kg Good condition Function description: Workpieces and media are set in motion by the induced vibration and are tumbled very gently. The continuous relative movement between the workpieces and the media results in the deburring and surface finishing of the workpieces.

Stanje: dober (rabljeno), številka stroja/vozila: 897, Jaw width: 160 mm Jaw height: 50 mm Clamping range: 280 mm Overall height: 130 mm Ncodpfx Ajb Dimvebbjl

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Njdpfswki Apex Abbscl Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) - Piston rod thread connection: M42 x 1.5 mm external thread - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Nedpfxjtt Nd Ro Abbjcl Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Stanje: rabljeno, Leto izdelave: 2007, največja širina rezanja: 1.060 mm, največja višina reza: 1.060 mm, Band saw Kasto HBA 10×12, year of manufacture 2007 Cutting capacities: - Round material: 1,060 mm - Square material: 1,060 x 1,060 mm - Flat material: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Smallest dimension to be cut approx.: Ø 300 mm Shortest cutting length: 10 mm Nedpfx Abswk D Efobscl Minimum remnant length for single cut: 20 mm Minimum remnant length in automatic mode: 100 mm Table load capacity: max. 50 t Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed, stepless at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force machine vice: 50,000 N Saw band dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw band guide: carbide, replaceable Saw band tension: hydraulic Saw band cleaning: easily exchangeable brush, motor-driven This offer is exclusively for commercial customers within the meaning of Section 14 of the German Civil Code. No sale to private individuals.

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm Nodjnzpx Rjpfx Abbocl -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg