Frech Vročo Komoro Stroj Diecasting - Vertic. nakup rabljenega (31.324)

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Ppjdpfx Asfrvzvogxjr Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: rabljeno, Leto izdelave: 2000, Clamping force 900 kN Clamping plate 540x540 mm Distance between tie bars 350x350 mm Machine weight approx. 5.5 t Clamping stroke 280 mm Ejector force 60 kN Ejector stroke 70 mm Mould height 160-400 mm Tie bar diameter 65 mm Injection force 75 kN Injection stroke 130 mm Injection plunger diameter 50, 55, 60 mm Injection volume (DIN 24480) 119, 163, 214 cm³ Specific injection pressure 380, 315, 265 kp/cm² Corresponding parting face 236, 285, 340 cm² Withdraw stroke 150 mm Fully overhauled DAW 80 GO die casting machine with DataLogic control for use with zinc alloys. Excerpt from the general overhaul: - Machine upgrade with new control cabinet and new operator panel, including replacement of all electrical wiring - Renewal of hydraulics (blocks and valves) - Clamping unit overhaul Detailed information upon request The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Chute cover at machine base (straight) - Standing operator panel - 1.0.2 Chute cover at machine base - 3.2.4 Multi-chamber holding and melting furnace with TOC pump - 3.2.1 Furnace control cabinet for furnace type Z - 4.0.1 Use of water-glycol - 4.2. (side) GO - 6.1.3.1 Wired signal interface for part removal (DISPO10) - 6.5.2 Equipment package RSD with switch - 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit - 7.3.1 Release agent tank TD 20 - 7.4.0.3 Spray bar CR 275 Pjdpfxoyzt D Ej Agxjpr Further options can be offered as agreed.

Stanje: novo, Leto izdelave: 2025, Clamping force: 240 kN Ppsdpfxsx Hp E Aj Agxjr Clamping plate: 380x380 mm Distance between columns: 250x250 mm Machine weight: approx. 3.0 t Clamping stroke: 180 mm Ejector force: 28 kN Ejector stroke: 50 mm Mould height: 120–300 mm Column diameter: 45 mm Casting force: 43 kN Casting stroke: 85 mm Casting piston diameter: 36, 40, 45 mm Casting volume (DIN 24480): 47, 63, 87 cm³ Specific injection pressure: 420, 340, 270 daN/cm² Corresponding parting plane: 56, 70, 88 cm² Eject stroke: 150 mm Machine Equipment 1.0.2 Clamping unit cover on the base frame for scale/chute 1.0.3 Small parts cover in the base frame 1.1.0 Motorised safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Internal machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment for clamping unit 3.0.1.2 Casting assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified casting piston removal 3.4.6 Casting piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 3.5.3 Plug-in connectors for electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance benefits package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction unit DISPO10 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum equipment 6.3.1.1 Control unit with visualisation on support arm 6.5.2 RSD equipment package with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.1 Spray bar CR 155

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® Ppsdpjiu Smbofx Agxor 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Ppodpfxjvxlufs Agxor Ejector stroke (decompression): 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.

Stanje: rabljeno, Leto izdelave: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Tie bar distance: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mold height: 120-350 mm Tie bar diameter: 56 mm Die casting force: 55 kN Ppsdpfx Agstuxmysxsr Die casting stroke: 130 mm Plunger diameter: 45, 50, 55 mm Casting volume (DIN 24480): 76, 121, 165 cm² Specific casting pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Recoil stroke: 150 mm Used machine DAW 50 as the basis for a general overhaul, excluding control cabinet, melting furnace and furnace cabinet. A full overhaul can be optionally performed at the manufacturer’s refurbishment facility. The scope of this overhaul can be defined upon request.

Stanje: novo, Leto izdelave: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mold height: 160–400 mm Tie bar diameter: 65 mm Injection force: 78 kN Injection stroke: 130 mm Injection piston diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 bar Corresponding parting plane: 226, 274, 326 cm² Ejection stroke: 220 mm Machine Features: 1.0.2 Clamping unit cover on base frame for scale / chute 1.1.0 Motorized safety door on injection side (left) 1.4.0 Machine mounts 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector advantage package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Injection assistance advantage package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill injection system 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop in return stroke 3.5.2 Electric nozzle and shot chamber heating 3.5.3 Plug-in connectors for electric nozzle and shot chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 DATADIALOG–RC machine control 5.1.5 Maintenance advantage package Ppsdpjr Hwf Asfx Agxjr 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualization on swing arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.3 Spray rail CR 275

Stanje: pripravljen za uporabo (rabljen), Frech tlačni livarski stroj za cink s toplo komoro, delujoč. Podpfsykvinjx Agxepr

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 20618, Hot Foil Stamping Machine American Supply HFS, Year 2006 - Serial No. 20618 Ppjdpfx Agsup Eimexsr Hot stamping area max. 80 x 150 mm Maximum pressure 600 kg Online video inspection via Skype video We would be delighted to welcome your visit – more machines available from stock Available immediately – machine can be inspected Located in Emskirchen / Nuremberg – test run possible

Stanje: rabljeno, Leto izdelave: 2017, Največja teža obdelovanca: 2000 g Psdpfx Agjy Diaujxjpr Rabljena tehtnica za uporabo na tlačno livarskih strojih do maksimalne teže kosa 2000 g. Demontirana iz tekoče proizvodnje. Naprava je bila pregledana in servisirana pri proizvajalcu.

Stanje: zelo dobro (rabljeno), Cinkova tlačna livarska stroj z vročo komoro FRECH DAW 200T Psdoyxkw Depfx Agxjpr

Stanje: kot nova (razstavni stroj), skupna masa: 900 kg, delovna širina: 1.000 mm, priključek za stisnjen zrak: 12 letvica, višina izdelka (maks.): 90 mm, zahteva za prostor dolžina: 3.500 mm, potrebna širina: 3.500 mm, delovna dolžina: 2.400 mm, Prodamo 6 etažno stiskalnico za širinsko lepljenje lesa, dimenzije lepljenja 2400 x1000 x 90 mm, ročno obračanje Podpfx Aget Agh Djxjpr Nova , na zalogi, takojšnja dobava

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, The SLV, SLH hydraulic press is intended for thick gluing of wood (window profiles, glued beams, etc.) with natural drying of glued joints. Ppedpfsgf A S Nex Agxer The work surface is equipped with hydraulic compression units and hydraulic trolleys for aligning the elements. Regulation for each segment is individual or together. Possibility to close each cylinder. The surfaces that come into contact with the adhesive are protected with stainless steel tape. The press is designed so that it is also possible to later upgrade the segments to the desired working length.

Stanje: zelo dobro (rabljeno), V zelo dobrem stanju. Pjdpfoxcll Uex Agxepr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Pjdpfx Ajucfwpogxjpr

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.900 mm, skupna višina: 1.500 mm, skupna širina: 1.600 mm, vrsta vhodnega toka: trifazni, For sale: Maqford BEA2 forming machine. Working length: 150-1500 mm, maximum sheet thickness: 2.0 mm, tube diameter: 120-600 mm. Supplied with a set of jaws for the respective diameters. Ppedpfx Agewmniaexor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Psdpfsv T Rlljx Agxepr

Stanje: novo, Leto izdelave: 2018, Crucible capacity: 420 kg As-new and unused industrial furnace for DAW20A or DAW20S. The furnace from Metec, model Z20/120C, features a durable stainless steel crucible. Crucible capacity is 420 kg, melting capacity per hour is 120 kg/h at a connected load of 21.5 kW. Ppodpotv Rlzefx Agxsr A suitable control cabinet can be custom-built upon request.

Stanje: rabljeno, Leto izdelave: 2007, used electric sprayer Spraymotion 411 E for use on die casting machines. The device is function-tested by the manufacturer. Includes spray and blow bar (SR system with adjustable nozzles) and stand Pjdpfxstwfkns Agxepr Connection: 24-pin plug Traverse module: 400 mm stroke

Leto izdelave: 1988, stanje: rabljeno, Platform truck, transport trolley, heavy-duty cart, table trolley, assembly trolley, industrial trailer - Industrial trailer with: single-axle turntable steering - 4 roller conveyors, rollers: Ø 65 x 365 mm - Load capacity: max. 6,800 kg Psdpfx Agjfk Smujxepr - Tyres: solid rubber - Trailer coupling - External dimensions: 4,760 x 2,730 x H 585 mm - Dead weight: 1,100 kg

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, Used Oskar Frech DAW 125 with control cabinet and crucible Ppodewywn Eopfx Agxsr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 32 t, delovna višina: 200 mm, model krmilnika: Siemens 840D, delovna dolžina: 2.150 mm, TEHNIČNI PODATKI Dolžina upogibanja: 2.150 mm Maksimalna višina upogiba: 200 mm Minimalna dolžina/širina med upogibi: 160–350 mm Pritisna sila: 32 t PODROBNOSTI STROJA Krmiljenje: Siemens 840D Dimenzije in teža Psdpfx Aoy D Ihwegxopr Dimenzije (D x Š x V): 8.500 x 7.000 x 2.850 mm Teža: 30.000 kg OPREMA Avtomatska menjava orodja Manipulator Obratni upogibni cikel Sistem za centriranje pločevine Dodatna zgornja orodja Sistem za nalaganje in razkladanje

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, obratovalne ure: 19.670 h, model krmilnika: PRIMACH 20L, laserska moč: 4.000 W, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 150 mm, TEHNIČNE PODROBNOSTI Premik osi X: 3.000 mm Premik osi Y: 1.500 mm Premik osi Z: 150 mm Ppsdpfx Asy D Icujgxjr Delovno območje: 3.000 x 1.500 mm Laserski vir: CP 4000 Moč laserja: 4.000 W PODROBNOSTI O STROJU Model krmilnika: PRIMACH 20L OPREMA Odvod dima

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, laserska moč: 4.000 W, najv. debelina jeklene pločevine: 22 mm, maks. debelina aluminijaste pločevine: 9 mm, potovalna razdalja osi X: 3.420 mm, pomik osi Y: 1.550 mm, CO2 laserski rezalni stroj s menjalcem palet, sistemom za nakladanje/razkladanje in skladiščem pločevine. TEHNIČNI PODATKI Ppodpfx Aoy D Izqegxjr X-pomik: 3.420 mm Y-pomik: 1.550 mm Z-pomik: 200 mm Delovno območje: 3.070 x 1.550 x 200 mm Moč laserja: 4.000 W Debelina reza Jeklo / Inoks / Aluminij: 22 / 12 / 9 mm Obremenitev mize: 920 kg Pomiki X/Y/Z: 80 / 80 / 60 m/min PODROBNOSTI O STROJU Krmilna enota: Fanuc 160 iLB Teža stroja: 15.500 kg OPREMA Dvojni skladiščni stolp LKI UL300FO TWIN, leto 2004 Sesalna in filtrirna enota Torit Hladilna enota MTA 201

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 150 t, hod: 415 mm, globina grla: 400 mm, razmak između stupova: 2.600 mm, delovno območje: 3.100 mm, Hidravlični sistem je bil popolnoma obnovljen, cilindri so bili razstavljeni in servisirani, tesnila, olje in filtri so bili zamenjani. Nameščene so bile nove svetlobne zavese, CNC krmiljenje je bilo preverjeno in stroj je bil na novo prebarvan. TEHNIČNI PODATKI Tlačna sila: 150 t Dolžina upogiba: 3.100 mm Izboklina: 400 mm Razdalja med stebri: 2.600 mm Hod: 415 mm Osi: Y1 - Y2 - X - R - Z1 - Z2 PODROBNOSTI O STROJU Krmilna enota: CYBELEC DNC 900 Moč motorja: 15 kW Mere & teža Skupne mere (D x Š x V): 4.000 x 2.400 x 3.200 mm Teža stroja: 12.800 kg OPREMA Ppsdpsy D Ih Rsfx Agxor Hidravlično vpenjanje orodij Hidravlično bombiranje