Dodatki za stroje za tlačno litje

FRECH Spraymotion 411 E

Stanje: rabljeno, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Stroke rate: 120 strokes/min Ram adjustment: 55 mm Ram surface: 290 x 210 mm Ram bore: 40 H7 mm Through-hole in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Ffsdpfx Ajcp Apyeflet Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Mechanical overload protection in ram (shear plate) - Control cabinet with touchscreen - Foot switch

Leto izdelave: 2003, Stanje: rabljeno, Pressure: 100 t Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Ram adjustment: 100 mm Table area: 950 x 660 mm Ffjdpfx Afera Rr Ejlst Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 Clamping plate: 570 x 450 x 65 mm Total connected load: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination Fsdpfob U Hwtex Afleft - Central lubrication (Vogel) - Cam control (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace Fjdpoiu Smbofx Afloft 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: dober (rabljeno), Leto izdelave: 1999, Uncoiling and Straightening Combination SOPREM BRH 7-200-80U-1250 BAP Strip width max. 200 mm Coil weight max. 1,250 kg Expansion range approx. 380 to 430 mm Coil outer diameter max. 1,300 mm Ffodpjhuwacefx Aflst Strip thickness approx. 0.8 to 3 mm Working direction: from right to left

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for drop-through hole - stepless speed control via frequency converter Fjdpotycdkofx Afljft - The machine will be mechanically inspected and overhauled in our facility, and will receive a new control cabinet with safety control and touchscreen - Current UVV inspection with braking time measurement

Leto izdelave: 1995, Stanje: rabljeno, Pressure: 125 t Stroke: 10–80 mm Strokes per minute: 240 spm Ram adjustment: 80 mm Table surface: 850 x 600 mm Ram surface: 760 x 550 mm Pass-through opening in table: 850 x 130 mm, adjustable Fedpfx Aelp U Nqsflsft Table height: 1100 mm Pin hole in ram: Ø 50 mm Total power requirement: kW Machine weight: approx. 13 t Required space (LxWxH): approx. 3000 x 2000 x 3300 mm Pneumatic clutch-brake combination Manual ram adjustment Manual stroke adjustment Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U

Leto izdelave: 2020, Stanje: kot nova (razstavni stroj), Plasma-nitrided rollers, 64 HRC, maximum sheet thickness 3 mm, maximum width 120 mm, repeat accuracy +/- 0.06 mm at 50 mm feed, 350 strokes/min, 180° free angle. Fedpeg Ew Ixjfx Aflsft

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref.-Nr.: 18586 Proizvajalec: KRAUSS MAFFEI Tip: KM180-750 AX Električni stroji Fjdpfx Aow E E Evofljft Leto izdelave: 2011

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Clamping force: 1100 kN, screw diameter: 35 mm, shot weight: 140 g, injection volume: 154 cm³, injection pressure: 2429 bar, max. cylinder temperature: 375°C, weight: approx. 8,000 kg, control system: MC 5 3.0, operating hours: 25,271 h, pump hours: 29,098 h. Included is a linear robot KM LRX 150, travel path X/Y/Z: 900 mm/1200 mm/3000 mm, payload: 15 kg. Documentation available. Inspection on site possible. Ffsdpfx Ajwz N Tvjflet