Fliegl Zts 200 P nakup rabljenega (53.459)

Stanje: novo, številka stroja/vozila: 535119ca408d3bd5a8e74be51, lastna masa: 6 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with robust ball bearing slewing ring, storage box integrated into turntable front section Foldable rear support Wheel chocks with holders Aluminum side underrun protection Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle with anti-spray flaps behind each axle 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) Extendable widening to 3,000 mm (not in rear taper) (Track width of construction machines or vehicles to be transported must not exceed 2,550 mm external frame width), storage compartment for wood planks centered in the loading area, 70 mm planks for widening to 3,000 mm, Tie-down eyes low-bed 3 pairs of lashing points integrated in the floor at the front, each rated for 10 t 6 pairs of lashing mushrooms recessed in the top and sides of the external frame, each rated for 10 t 1x after neck area, rest distributed in between, spacing not greater than 1,200 mm 1x rear taper 5 pairs of ring lashing eyes recessed in external frame, each rated for 5 t (instead of stake pockets) Trailer turntable drawbar Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Twin steel rims, factory silver Braking System 2-line air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, with connecting cable Attention: The trailer must only be towed by towing vehicles that ensure the effectiveness of ABS! Electric system 24 Volt, multi-chamber lights, yellow LED side marker lights Iaodpfji Ri N Hjx Aa Uer 2 white/red width marker lights at rear 2 white position lights at front 1 rotating beacon with bracket, switchable via parking lights (removable beacon) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm 2 x 7-pin fail-safe connectors at the front, with connecting cable Floor Front area steel floor, then 70 mm softwood floor, wheel arch area with steel/tread plate covering Rear taper with 70 mm softwood floor Low-bed area incl. rear taper 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety below, foldable (prevents lateral slipping, not in conjunction with hydraulic side shift) wooden planking with spring assist Operational Notes A special permit is required for an axle load of 10,000 kg. The permit must be applied for individually in each federal state, and the legislator is not obliged to grant approval for a 20 t gross vehicle weight. Customer's risk. The specified gross weight is technically possible, depending on the cargo the gross weight may not be achievable while observing the permitted axle, support, and kingpin loads. Registration / Plates Registration country: Germany EC type approval acc. to 2007/46 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paintwork Frame DB Nova grey Access ramps hot-dip galvanized Note: Archive images!

Stanje: rabljeno, številka stroja/vozila: WFDFLT22001007597, lastna masa: 6.200 kg, največja dovoljena obremenitev: 11.800 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2018, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2017, Further Information Chassis: Steel welded construction, double cranked with low bed in front of and behind the axle assembly, low bed beveled for driving on, turntable with robust ball bearing slewing ring, foldable rear support, wheel chocks, side underrun protection, quarter shell mudguards. Lashing points: Over front axle: 2 pairs of ring lashing eyes each rated 5t at the front at the cranked part of the low bed / Rear axle: 6 pairs of lashing eyes laterally in the low bed each rated 8t. 6 pairs of lashing eyes each rated 5t between the longitudinal beams, pair of stake pockets recessed in the outer frame, inside dimension 70 x 40 mm, or alternatively to stake pockets, 5t ring lashing eyes embedded in the floor. Drawbar: Certified 40 mm towing eye Axles: BPW drum brake axles Iasdpsi Ri N Usfx Aa Usr Brake system: 2-line compressed air braking system, spring-actuated parking brake, 2 fail-safe coupling heads at the front Electrics: 24 volts, multi-chamber lights, lateral yellow lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, beacon with bracket, pair of illuminated warning panels extendable to 3,000 mm, 2 x 7-pin fail-safe connectors at the front Floor: Front crank with steel / chequer plate covering, stowage box recessed in the transition to the crank, track area and middle section between the beams with steel / chequer plate covering, rear slope with 70 mm softwood floor, low bed area including rear slope 5900 mm Ramps: Hanging rail for aluminum ramps across the entire width, as U-profile across the entire width. Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, stowage compartment for ramps between beams Approval: Contour marking with reflective strips according to ECE R 048, white at sides and red at rear

Stanje: novo, številka stroja/vozila: 2b58968e34fac93b429a256e9, lastna masa: 5 kg, največja dovoljena obremenitev: 12 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-bed trailer Steel welded construction Turntable with robust ball-bearing slewing ring, storage box integrated into turntable front section Rear folding support Wheel chocks with holder Aluminum side underrun protection Full-width rear mud flaps Quarter-shell fenders in front of 1st axle Spare wheel holder for 1 spare wheel, including wheel mounting kit Spare wheel, same brand and specification as standard tires, steel rim Plastic tool box with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Lashing rings low-loader 3 pairs of lashing points (10 t each) integrated in front floor, 6 pairs of mushroom lashing points (10 t each) fitted on and into the outer frame at the top and sides: 1x at gooseneck, remaining distributed in between (distance max. 1200 mm), 1x on rear slope 5 pairs of recessed ring lashing points in the outer frame (5 t each, convertible to stake pockets) Drawbar equipment trailer turntable Drawbar with certified 40 mm towing eye Axles and suspension SAF drum brake axles Axle/chassis laser alignment for reduced tire wear and improved fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings Wheels and tires Isdpfx Aaei Ri Nxs Ujar 235/75 R17.5 Manufacturer's choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, including connection cable, voltage converter for 12/24 Volt operation Note: Tractor/trailer requires a 7-pin 12 Volt socket! (Electric system with voltage converter required!) Attention: Trailer may only be towed by vehicles that ensure proper ABS functionality! Electrics 24 Volt, multi-chamber lights, yellow LED side lighting 2 white/red width marker lights at rear 2 white position lights at front Additional LED work light at rear, controlled via reversing light 2x 7-pin non-interchangeable plugs at front with connecting cable 1x 7-pin agricultural plug, voltage converter 12/24 Volt (for electrics only, not for ABS/EBS) Floor Steel floor in front section, followed by 70 mm softwood flooring, steel/chequered plate in wheel arch area Rear slope section with 70 mm softwood flooring Low-bed area including rear slope 8,200 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, timber-planked, with spring assist Operating notes Special permit required for 10,000 kg axle load; permit must be obtained separately in each federal state; no guarantee from authorities for 20 t GVW. Customer assumes risk. Country of registration / plates Country: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7-service hotline Prepared for double-line number plate holder Outline marking with reflective tape per ECE R 048, white side and red rear Paintwork Frame DB 7350 Nova grey 10-year corrosion warranty Drawbar galvanized or black, manufacturer's choice Ramps hot-dip galvanized Attention: Archive images!

Stanje: novo, številka stroja/vozila: 6d88bda3a1ee2464a81b34f36, lastna masa: 4 kg, največja dovoljena obremenitev: 13 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction with a slight central camber, turntable with heavy-duty ball bearing slewing ring, chocks with holders, quarter shell mudguards in front of and behind each axle. Lashing Points Low Loader Over front axle: 2 pairs of ring lashing eyes (each 5 t) at the front on the cranked section Low-bed: 4 pairs of lashing eyes (each 6 t) at the sides of the lowbed 5 pairs of lashing eyes (each 5 t) between the longitudinal beams Drawbar Assembly Turntable Trailer Drawbar with certified 40 mm towing eye, mechanically adjustable in length by 6 x 100 mm increments and lockable (Drawbar length 1,700 – 2,300 mm) Axles + Suspension BPW drum brake axles with 10 t axle load each, slack adjusters. Continuous axle brake test up to 105 km/h. Rear axle can be removed manually. To do so, release air locking mechanism, lower the rear section to the ground, disconnect hydraulic hoses from rear section, insert the transport bar into a rear socket, and by gently pushing down and simultaneously pulling backwards, release rear section (parking brake released). After loading/unloading, move rear section into position and hook up to mark. Then raise rear section to driving height and connect hydraulic hoses. Confirm bolt locking (visual inspection if bolt snaps in) and check rear function. Air suspension with lift & lower valve. Wheels and Tires 235/75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver. Braking System 2-line compressed air brake system, spring-loaded parking brake, 2 fool-proof coupling heads at front with connection lines to tractor, EBS, electronic brake system with EBS plug at front with connection cable. Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow LED side marker lights, 2 white position lights front, 2 white/red lane control lights rear, revolving beacon with bracket, powered via parking light (removable), 2 pairs of warning boards double LED illuminated and extendable up to 3,300 mm, removable with plug, 2 x 7-pin fool-proof plugs at front with connecting cable, 1 x 7-pin agricultural plug, voltage converter 12/24 volt (for electrics only, not for ABS/EBS) Floor Steel/aluminum checker plate floor on cranked section, between longitudinal and cross beams with perforated cover plates. Axle cover not drive-over, widening to 3,000 or 3,300 mm possible. Operating Instructions Note! For 10,000 kg axle load, a special permit is required. Permit must be applied for separately in each federal state; the legislator is not obliged to grant approval for 20 t GVW. Customer’s risk. Special permit required if total train length exceeds 18,750 mm. Observe country-specific registration regulations. The stated gross weight is technically possible; depending on the cargo, the gross weight may not be achievable in compliance with permissible axle, support, and fifth wheel loads. Observe BO-circle!!! Registration / License Plates Iedpfxei Ri N As Aa Uear Registration country: Germany, with Dekra inspection and report (per §13 EC-FGV), prepared for single-line license plate holder, ECE-70-compliant warning board, contour marking with reflective strips per ECE R 048 Paintwork Front frame hot-dip galvanized incl. passivation, rear frame RAL9006 silver, drawbar KTL black Attention: Archive images!

Stanje: rabljeno, številka stroja/vozila: WFDFLT22001011091, lastna masa: 5.340 kg, največja dovoljena obremenitev: 12.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2021, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2021, Further information Chassis central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Crank support leg at the front Foldable rear support Wheel chocks with holder Side underrun protection made of aluminum Full-width mud flaps at the rear Mud flaps in front of each axle and anti-spray mud flaps behind each axle 1x spare wheel holder for 1 E-tyre, with wheel fixing kit 1x spare wheel, same brand as main tyres, steel rim 1x stainless steel storage box, width=600/height=400/depth=500 mm, with polished lockable door Lashing points for low loader 5 pairs of stake pockets embedded in the outer frame, inside dimensions 70 x 40 mm (can be retrofitted with 5t lashing rings, not included) 7 pairs of lashing mushrooms recessed into the top and side of the outer frame, each 10 tonnes 2 pairs of fold-down lashing eyes additionally recessed into the low bed platform, each 10 tonnes (1 pair at the front and 1 pair on the rear slope) Towing device central axle trailer Drawbar with certified 50 mm drawbar eye Axles + Suspension Ijdpfxsp N Dguo Aa Ujar SAF drum brake axles Laser-measured axles/chassis to reduce tyre wear and fuel consumption Axle spacing 1810 mm (then 10 tonne technical axle load) Air suspension Brake system 2-line compressed air brake system, color-coded air line layout for easy maintenance. Spring-loaded parking brake Duomatic coupling at the front, with connecting line to towing vehicle, EBS, Electronic Braking System with EBS connector at the front, with connection cable Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lift & lower valve Vehicle - Driving stability system Axle load detection via EBS Canbus signal, for display on the dashboard display, truck must be suitably pre-equipped, no truck installation (not a certified scale) Wheels and Tyres 235/75 R17.5 Brand Fulda Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at the front, with connection cable 1 additional LED work light at the rear, switched via reversing light 1x LED beacon with holder, switched via side light (lamp removable) Flooring subsequently with 70 mm softwood flooring, wheel arch area with steel/chequer plate covering Rear beavertail with Mega Grip serrated grating coating Low-bed platform incl. rear beavertail 6500 mm Front wall / corner stanchions 25 mm aluminium hollow section, 400 mm high, removable Loading ramps Steel ramps 3600 mm long, 750 mm wide, split with cable tension, laterally adjustable Ramp traverse, minimum gap approx. 600 mm, maximum outer width approx. 2880 mm Ramp surface with Mega Grip serrated grating Operated hydraulically via own electro-hydraulic unit, mounted in a steel box, operation on the right side at the front. Note: NATO socket with connecting cable on the truck required. Cable must not be connected during driving! Hydraulic lateral adjustment of loading ramps, individually controllable (only in combination with hydraulic ramp actuation)

Stanje: novo, številka stroja/vozila: 8df1ead53cc82aeb51e50a37d, lastna masa: 4 kg, največja dovoljena obremenitev: 13.880 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Turntable Chassis for Waste Management Fine-grain steel welded construction Container locking: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is a 2-point version, acting from the inside; locking of roll-off containers with an internal web is not possible (for transporting roll-off containers with subframes according to DIN 30722). Note! At the beginning of the roller recess at the front, the container must be slid on completely flat! Longitudinal guide rails laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushroom fittings recessed into the upper and side outer frame, each with 5 t capacity 7 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included in delivery) 2 wheel chocks with holders Side underrun protection in aluminum Rear underrun protection in steel Quarter-shell mudguards according to EC standard With anti-spray mudflaps according to EC standard Drawbar equipment - Turntable trailer Towing bar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel twin rims, factory silver Braking System 2-line compressed air brake system Spring chamber parking brake Iaodpfxji Ri Nuj Aa Uor 2 polarity-proof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrical Equipment 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin polarity-proof plugs at the front, with connection cable Floor Steel floor Roller recess for container at the front recessed in the floor, for roll-off containers from 5,000–7,000 mm length Note: Slight floor undulation due to welding distortion is possible! Ramps Lockable storage compartment for ramps beneath the loading platform Operating Notes At 10,000 kg axle load, a special permit is required. This permit must be applied for separately in each federal state; the legislature is not required to guarantee approval for a 20-ton GWV. Customer’s risk. The specified total weight is technically possible; depending on the cargo, the total weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Warning plate according to ECE - 70 Paintwork Frame DB 7350 Nova grey 15-year warranty against rust-through Note: Floor undulation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive images!

Stanje: rabljeno, skupna masa: 18.000 kg, prva registracija: 09/2019, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, - Dvojna montaža pnevmatik - Mega, - 3 metre notranje višine - Stranski naklad Iasdpfx Aaexxxlts Uer

Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis - Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring, storage box integrated into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflaps Extendable extensions to 3,000 mm (not at the rear bevel) (Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for extension to 3,000 mm Low-bed lashing rings 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame 1 x by the neck area The remaining points are distributed at no more than 1200 mm intervals 1 x at the rear bevel 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) Drawbar Turntable Trailer Coupling Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical Axle load equalisation (rocker balancing) Brake System 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake included 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles ensuring the proper function of ABS! Wheels and Tyres 235/75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver finish Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate Rear bevel with 70 mm softwood flooring Low-bed area incl. rear bevel 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Iedpji Riy Eefx Aa Uoar Wood-covered, included With spring assist Operating Notes An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed! The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EU-FGV) 24/7 service hotline Prepared for double-line license plate holder Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear Paintwork Frame DB 7350 Novagrau 10-year guarantee against rust-through Drawbar galvanized or black, manufacturer's choice Access ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension Iodsi Ri Ryspfx Aa Uoar SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box incl. Turntable front structure Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Extendable widenings to 3,000 mm (not at rear taper) (track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central compartment on loading area for timber planks 70 mm timber planks for widening to 3,000 mm Lashing points Low-loader 3 pairs of integrated lashing points, each rated to 10 t, at the front floor 6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t 1 x at neck area remaining points distributed, distance no greater than 1,200 mm 1 x at rear taper 5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly for trailer turntable Drawbar with certified 40 mm towing eye Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 Iaodji Ri I Espfx Aa Uor manufacturer's choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with ABS connector at front, connection cable included Attention: The trailer may only be towed by vehicles that ensure ABS functionality! Electrics 24-volt multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear lane marker lights 2 x 7-pin non-interchangeable connectors at the front, with connection cable 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-lit and extendable to 3,000 mm Floor Steel floor at front section thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear taper with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable wooden inlays spring-assisted lifting Operating instructions Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!! The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution) Country of Registration / Plates Registration country: Germany 1 with Dekra inspection and report (according to §13 EC-FGV) 24/7 service hotline prepared for 2-line license plate holder Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear Paint Frame RAL 3002 Carmine Red 10 years warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Attention: Archive photos!

Stanje: novo, številka stroja/vozila: a198a229880f94ce822d671fc, lastna masa: 3 kg, največja dovoljena obremenitev: 16 kg, skupna masa: 20 kg, konfiguracija osi: 1 os, velikost pnevmatike: 385 / 65 r 22,5, Further information Chassis semitrailer for containers Fine-grain steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, 2 pairs of removable guide rollers 4 container locks with reinforced outriggers on 20-foot base for swap bodies 7.45 and 7.82 m 24-ton, 2-speed landing gear, single-sided operation, with straight lower section, without compensating stroke, uncoupling under load only possible with even load distribution! 2 wheel chocks with holder Side underrun protection in aluminium Rear underrun protection in galvanized steel, Half-shell mudguards with anti-spray mudflaps Axle & suspension Iasdpfoi Rixnjx Aa Uer SAF disc brake axle, with 430 mm disc diameter, Air suspension with lift & lower valve, with hold function for H&L Wheels and tires 385 / 65 R 22.5 from leading manufacturers Steel rims in factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that can ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Registration / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EC - FGV) prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Warning panel according to ECE - 70 Paintwork Frame in DB novagrau Landing legs coated in black Note: Archive images!

Stanje: rabljeno, Leto izdelave: 2018, Delivery time approx. 5 months. Machine from school operation – TOP condition, low hours (edge banding unit unused). Without tools. Plus dismantling / delivery / installation and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm. Edge banding – Made for You. The CNC machining centre is equipped with an extensive range of edge banding tools to meet every requirement in woodworking. MAIN ADVANTAGES: Iaodjyuw Srspfx Aa Ujr - High performance, featuring the advanced edge banding unit H80C, drilling spindles with 8,000 rpm and the most robust spindle technology on the market, providing over 1,000 maintenance-free operating hours. - Superior and more comprehensive equipment: suction cups can be excluded and configured with the FLEX worktable to optimally equip the machine according to requirements. - Easier and more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies 'MAESTRO EDGE'. - Easy to use: the lowered frame keeps the worktable accessible at all times; the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers necessary. Frame construction: The base structure is a monolithic construction out of thick-walled steel, reinforced throughout the entire machine bed by welded square-section plates, providing exceptional rigidity. The shape of the machine bed, with a broad base, ensures lasting precision and stability. The supporting structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid; the especially wide footprint is specifically designed to provide stability, guaranteeing consistent accuracy regardless of operating conditions, with no need to anchor the machine to the floor. The base forms a large and solid support for the moving gantry: the working unit therefore benefits from a balanced, stable, and resilient support capable of withstanding maximum loads, ensuring superior performance and higher accuracy. The moving gantry is made from a solid single piece anchored to the base and runs on high-quality prismatic guides with ball-bearing carriages. The working unit is mounted on it and moves along the Y and Z axes on prismatic guides with ball-bearing carriages. Movement of the lower moving unit (X axis) and the working unit along the moving beam (Y axis) is via a helical rack and pinion system, giving more tooth-to-tooth engagement for greater acceleration and higher speeds along the X and Y axes. The specially designed helical teeth reduce wear and lower mechanical noise. The vertical Z axis is driven by a ball screw, ensuring perfect balance under dynamic loads and supporting rapid acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring absolute machining quality.

Stanje: novo, Leto izdelave: 2025, Zustand neu Iaodpfx Aeyrhqyea Usr Baujahr 2025 Lagernummer 050141 Lieferzeit prompt, Zwischenverkauf vorbehalten Ursprungsland Polen Preis 2821,24 € Lagernd 1 Schleifscheibenabmessungen 200 x 32 x 32 mm Motor 1 kW Drehzahl 2800 1/min Anschluss für die Absaugung Dm. 42 mm Länge 470 mm Breite 250 mm Höhe 1050 mm Gewicht 60 kg Mit Maschinenständer mit integrierter Absaugung, Not-Aus-Schlagtaster und Bremse Laufruhiger, wartungsfreier Motor Seitlich geschlossene Schutzhauben Stabile, nachstellbare Werkstückauflagen Hoher Sicherheitskomfort durch nachstellbare Funkenabweiser Geeignet für Schleifen, Entgraten und Schärfen von Werkzeugen aller Art, Metallprofilen, etc. Motorschutzschalter und Unterspannungsauslöser Beidseitiger Funken/Augenschutz Anschlusskabel mit CEE-Stecker 16 A Je 1 Schleifscheibe grob und fein ALTERNATIVEN: Ausführung ohne Absaugung (Art. 317.774) Ausführung ohne Untergestell, Absaugung und Bremse/Not-Aus-Schlagtaster (Art. 317.762)

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 200 mm Maximum air flow: 3,200 m³/h Rated air flow: 2,262 m³/h Air flow monitoring: differential pressure display Vacuum: 2,250 Pa Filter area: 16 m² Residual dust content: less than 0.1 mg/m³ Iajdov Sq Ttspfx Aa Ujr Sound pressure level: 65 dB Chip bag volume: 320 l Filter cleaning: pneumatic, jet cleaning Motor power: 4 kW Machine length: 2,340 mm Machine width: 880 mm Machine height: 2,190 mm Weight: 385 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 130.000 km, vrsta goriva: dizel, Leto izdelave: 2018, obratovalne ure: 4.800 h, dvižna višina: 20.000 mm, nosilnost: 200 kg, PLATFORMA NA TOVORNJAKU Palfinger P200 AXE Leto 2018 Delovna višina: 20 m Stranski doseg: 9 m Nosilnost košare: 200 kg Delovne ure: 4.800 Kilometri: 130.000 Iedpfsx I Rz Iox Aa Usar Zelo kompaktna naprava Odlično splošno stanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, obratovalne ure: 10.356 h, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.100 mm, nazivna (navidezna) moč: 44 kVA, proizvajalec krmilnikov: Heidenhain TNC 430, teža obdelovanca (maks.): 5.000 kg, skupna višina: 4.200 mm, skupna dolžina: 7.900 mm, skupna širina: 8.800 mm, hitrost vretena (min.): 10.000 obr/min, Year of manufacture: 2001 CNC control: Heidenhain TNC 430 Axes Travel X-axis mm: 1800 Iaodpfx Aasyq Rpcj Ujr Travel Y-axis mm: 2000 Travel Z-axis mm: 1100 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 NC milling/turning table: Pallet dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Max. spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 Tool changer type: Double gripper Chip-to-chip time sec.: 13.5 Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rotating viewing windows Blow gun Operating mode 4 Tool breakage sensor Machine operating hours: Power-on time: 132612 Spindle running time: 68009 Basic machine: Dimensions / Weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Leto izdelave: 2013, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, B+B Anlagenbau TR 100/200-P-V – Sécheur mécanique – Bon état – Démonté en état de marche À vendre : B+B Anlagenbau type TR 100/200-P-V. La machine est en bon état et a été démontée alors qu’elle était encore en fonctionnement. D’un point de vue technique, elle fonctionne parfaitement ; seuls les consommables habituels présentent des signes d’usure. Pièces d’usure concernées : Tamis Cadres de support de tamis (cadres de montage) Joints d’étanchéité en caoutchouc Les pales à l’intérieur de la machine sont encore en bon état. Un grand nombre de pales de rechange est inclus dans la vente. Moteur d’entraînement principal : 55 kW Pièces détachées supplémentaires incluses : Moteur d’entraînement de rechange Paliers principaux (2x) Iodpfx Aasym Ag Ej Uear Carrosserie de ventilateur Poulie Boîte de vitesses pour l’entraînement du grattoir de tamis À noter : Aucun tamis de rechange n’est inclus. Toutefois, les coordonnées du fournisseur pour les tamis et les cadres de support de tamis seront fournies. La machine est disponible immédiatement.

Stanje: novo, Leto izdelave: 2026, Description Double Grinding Machine TS 200 SD P with EXTRACTION UNIT, machine stand, emergency stop push button, and brake smooth-running, maintenance-free motor side-closed protective covers sturdy, adjustable workpiece supports high safety comfort with adjustable spark deflectors suitable for grinding, deburring, and sharpening tools of all kinds, metal profiles, etc. motor protection switch and undervoltage release dual-sided spark/eye protection connecting cable with 16 A CEE plug 1 coarse and 1 fine grinding wheel included 12 months warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 x 230 - Speed (rpm): 2550 - Motor three-phase 400 V (kW): Operating mode S2-30 min (short-time operation) - Weight (kg): 60 Iaodpor Eqzfefx Aa Usr DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE OFFICIAL FLOTT PARTNERS AND CAN OFFER YOU ANY PRODUCTS FROM THE COMPLETE FLOTT RANGE! ASK US FOR AN OFFER!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Technical Data POWER UNIT 200 P • Inlet diameter: 200 mm • Rated motor power: 2.9 kW; 400 V/50 Hz • Max. air flow rate: 3010 m³/h • Rated air flow rate: 2262 m³/h • Negative pressure: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 discharge containers (roll containers): each 241 litres • Dimensions (L x W x H): 2322 x 830 x 2050 mm • Weight: 320 kg • Version / operator side selectable: right / left Location: Available from stock in Bitburg Top price for this demonstration unit Iodebpg Ncjpfx Aa Uear

Stanje: dober (rabljeno), Reflection photoelectric sensor, photoelectric sensor, retro-reflective photoelectric switch Iedpfx Aecqp Hlsa Usar - Quantity: 2x sensors available - Price: per unit - Weight: 0.05 kg

Stanje: dober (rabljeno), Manual hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic manual pump, hydraulic pump - Manufacturer: Simplex, hydraulic pump hand pump two-stage pump - Type: P- (unfortunately no exact type designation) - Pressure range: max. 10,000 PSI / 689 bar Iaodswwq Exjpfx Aa Ujr - Tank capacity: l - Quantity: 1x hand pump available - Dimensions: 740/200/H150 mm - Weight: 8.7 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Morbidelli P 200, letnik 2019, približno 4.500 delovnih ur. Stroj je 100% popolnoma delujoč, lepo ohranjen in čist. Od prve montaže leta 2019 na Norveškem je na svoji izvirni lokaciji. Od novega ga upravlja le en operater. Za vse tehnične podatke preberite priložen PDF dokument (na koncu tega oglasa kliknite 'prenesi ta dokument'). Stroj si je mogoče ogledati po predhodnem dogovoru. Stroj bo odklopljen konec februarja 2026. Lepo ste vabljeni. Rekman Maskin & Service – servis CNC strojev od leta 1986 – Iodpfx Aowuubfja Usar

Leto izdelave: 1979, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Si3,2t, Demag wire rope hoist crane lifting unit 3200 kg P616H13 Load capacity: 3200 kg / 3.2 t lifting capacity / two-fall Lifting height approx. 8 m Total weight approx. 350 kg, connection: 400V 50Hz As-new condition, completely overhauled by Erich Schäfer Item location: 75053 Gondelsheim Iajdpoupwprefx Aa Usr See pictures

Stanje: rabljeno, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2019, dolžina tovornega prostora: 7.200 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45 R19,5 160J, velikost zadnje pnevmatike: 445/45 R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Printing errors, mistakes and changes excepted, sample images shown. For more details, visit: ! Iedpfx Aoy Di Tnja Uear

Stanje: rabljeno, lastna masa: 3.140 kg, največja dovoljena obremenitev: 14.860 kg, prva registracija: 07/2022, naslednji pregled (TÜV): 12/2023, skupna širina: 25.500 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 55 R 22.5 / 14mm, velikost sprednje pnevmatike: 385 / 55 R 22.5 / 14mm, obratovalna teža: 18.000 kg,