Dvojno stojalo za brušenje

FLOTT TS 200 SD P (NEU ab Werk)

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MK 4 Speed range: 75 – 3,200 rpm Table traverse (cross): 190 mm Table traverse (longitudinal): 490 mm Table clamping surface: 700 x 210 mm Connection voltage: 400 V Maximum cutter diameter: 80 mm Total power requirement: 1.1 / 1.5 kW Machine weight approx.: 0.35 t Gjdoupw Uzjpfx Ab Tekf Space requirements approx.: 0.8 x 0.75 x 1.85 m Drilling/milling machine equipped with: • Thread cutting device • Cross table with adjustable guides • Drill quill feed • Gearbox • SK 40 spindle taper

Stanje: novo, Leto izdelave: 2023, številka stroja/vozila: PRJ065958, ALZMETALL Bench Drill Press, Drilling Capacity in Steel: 16mm Short Taper Spindle MK2, Spindle Travel: 80mm, Throat Depth: 190mm, Column Diameter: 65mm, Machine Table Usable Surface: 300x240mm, with T-slots 2 x 12mm x 80mm, Distance Spindle to Table min./max.: 75/357mm, Table Height Adjustment by Hand Crank, Machine Table Base Plate, Usable Surface: 300x240mm, with T-slots 2 x 12mm x 80mm, Distance Spindle to Base Plate min./max.: 437/437mm, Manual Feed, Machine Height without Options: 825mm, Net Weight: 83 kg. Gsdpelubw Iefx Ab Tskf - Stepless speed regulation: 100-2000 rpm Standard Equipment: 5" TFT - LCD display with touch function: Manual input of target spindle speed, real-time speed display, integrated drilling depth indicator with touch reference point reset, virtual drilling depth scale in the display, machine status displays and warning notifications, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC Motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, Three separate push buttons for forward, reverse, and stop, Spindle holding via brake function, spindle guard with electrical interlock, lockable main switch, mushroom-type emergency stop push button (latching), stepless speed adjustment via potentiometer, IP54 protection class, spindle guard with electrical interlock, finish: DD texture paint, signal white RAL 9003, PANTONE 7545c, black Incl. the following options: LED work light Pos. 12. Delivery time: ex stock Waiblingen Beinstein

Leto izdelave: 1996, Stanje: dober (rabljeno), številka stroja/vozila: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112 mounted on a base frame. Comparable to, but not a Kamat, Uraca, or Woma unit. Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min Drive speed: 1500 rpm Drive power: 90 kW Equipped with VEM Motor 90 kW 3~ motor, IP55 Includes pressure regulating valve Includes safety valve Includes oil cooling system Dimensions (LxWxH): approx. 2300 x 1000 x 1400 mm Weight: approx. 1500 kg Year of manufacture: 1996 Gkodpfohtnniex Ab Tsf Condition: in good used condition.

Stanje: rabljeno, Mounting: MK 4 Gkedjb N Ezrjpfx Ab Tsf

Stanje: novo, The SSB F 60 Super VT PRO is a powerful pillar drilling machine that is perfectly suited to the demands of workshops. This machine combines state-of-the-art technology with robust design, making it ideal for single-item and small-batch production, as well as for drilling, countersinking, reaming, and thread cutting. Thanks to the electronically controlled servo quill feed and the large touchscreen control display, users benefit from user-friendly operation and flexible adjustment of machining parameters. Featuring a sturdy construction made from high-quality cast iron and a motorized height-adjustable table that swivels ± 45°, the SSB F 60 Super VT PRO is excellently suited for use in steel and hall construction. Additionally, the machine offers an impressive drilling capacity of up to 60 mm and an automatic threading cycle, enhancing efficiency. Take the opportunity to acquire the SSB F 60 Super VT PRO for your projects—request a quote and experience KNUTH quality! Godpjq Rdqnefx Ab Tjkf

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine Gsdeirax Ujpfx Ab Tskf -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: novo, Gear-driven milling and drilling machine Fervi T047/400VDA with tapping unit, 400V 1.5kW, NEW MANUFACTURE “CE” The machine can be used for the following operations: - Milling - Drilling - Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Maximum drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with insert face mill: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill travel: 130 mm Quill diameter: ø 76 mm Gksdpsg Npiwefx Ab Tjf Column diameter: ø 115 mm Headstock tilting: ± 60° Spindle speed (12): 75 ÷ 3,200 rpm Three-phase motor: 400 V, 50 Hz, 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot width: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 59 h, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 400 mm, širina brušenja: 200 mm, dolžina podajanja os X: 510 mm, dolžina podajanja os Z: 220 mm, hitrost pomika os X: 20 m/min, premer brusilnega koluta: 205 mm, razdalja od mize do središča vretena: 357 mm, obremenitev mize: 120 kg, vrsta vhodnega toka: trifazni, širina brusilnega kolesa: 16 mm, največja hitrost vretena: 3.600 obr/min, hitrost vretena (min.): 1.000 obr/min, skupna masa: 2.100 kg, moč motorja brusilnega vretena: 2.200 W, hitrost brusnega kolesa: 3.600 obr/min, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, TEHNIČNE LASTNOSTI: Leto izdelave: 2017 Barvni zaslon na dotik: Da Največja dolžina × širina brušenja: 400 × 200 [mm] Hod osi X (premik mize): 510 [mm] Najmanjša hitrost hoda osi X: 100 [mm/min] Največja hitrost hoda osi X: 20.000 [mm/min] Hod osi Z (prečni premik): 220 [mm] Min. razdalja med nosom vretena in mizo: 22,5 [mm] Maks. razdalja med nosom vretena in mizo: 357,5 [mm] Največja obremenitev na mizi: 120 [kg] Najmanjša hitrost brusnega kolesa: 1.000 [obr/min] Največja hitrost brusnega kolesa: 3.600 [obr/min] Moč motorja brusnega vretena: 2,2 [kW] Največji premer brusnega kolesa: 205 [mm] Največja širina brusnega kolesa: 16 [mm] Najmanjša širina brusnega kolesa: 6 [mm] Premer luknje brusnega kolesa: 31,75 [mm] Število delovnih ur: 59 [h] Napajalna napetost: 400 [V] Skupna potrebna moč: 11 [kVA] Teža: 2.100 [kg] PRILOŽENA OPREMA: x1 rezervoar za hladilno tekočino 150 [L] FB1/R s papirnim filtrirnim sistemom FB1 x1 elektro-permanentna magnetna miza BRAILLON tip EPEFINE 2 x1 daljinski upravljalnik za magnetno mizo BRAILLON, z mikroprocesorskim upravljanjem, tip T10 x5 prirobnic za brusna kolesa x1 hladilnik olja x1 transformator x2 servisna ključa x1 uravnoteževalna os x1 komplet transportnih nosilcev osi STANDARDNI KONVERZACIJSKI NAČIN PROGRAMIRANJA: Ravnsko in kotno oblačenje (standard) Površinsko brušenje, večkratno vrezovanje in čelno brušenje (standard) VKLJUČENO ISO PROFILIRANJE: Gkedpfx Abjw Hf Hie Tef Profiliranje koles Obdelava obrisev obdelovanca Polna funkcionalnost za programiranje V-oblik in prostih oblik na brusnem kolesu ter ISO konturiranje na obdelovancu Natančno pozicioniranje vključeno: +/- 1 [μm] Stroj je možno videti pod napajanjem v naših prostorih po predhodnem dogovoru. Cena na povpraševanje, nalaganje na tovornjak vključeno. Možnost dostave po vsem svetu. Podatki na tej strani so bili zbrani po naših najboljših zmožnostih. Zaradi tega točnosti ni mogoče jamčiti. Podobni stroji kot znamke Jones & Shipman, Jung, Favretto, Blohm, Studer. Prav tako preverite valjčne brusilke, stružnice, obdelovalne centre, rezkalne stroje.

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feed shaft lathe with: Godem Rlb Njpfx Ab Tokf • 3-axis digital readout fully installed • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction • Safety relay • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: novo, Round material 30 x 1 mm Square material 30 x 30 x 1 mm Solid round material 16 mm Solid square material 30 x 10 mm Rotational speed 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Space requirement approx. 0.82 x 0.60 x 1.26 m Electric profile bending machine with - 5 sets of rollers 2x for round material 20 mm and 30 mm, 1x for flat material 1x for square material Godpeh D Svnjfx Ab Tskf 1x for ? - Foot switch with emergency stop