Fliegl Dhks-420 Thermo Basic Plus nakup rabljenega (11.140)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202036640, lastna masa: 6.213 kg, največja dovoljena obremenitev: 35.787 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2025, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.310 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rumena, The images are archive photos; the vehicle may still be in use! Coupling height approx.: 1,200 mm Gisdpfxeyylaps Ai Aeu Chassis – Tipper Semi-Trailer Basic lightweight construction, kingpin plate with replaceable 2" kingpin, curved front wall (patented). Folding underrun protection, underrun protection with "spring assist" for easier operation Integrated mudguard bracket with stone-repellent surface Axles & Suspension SAF disc brake axles with 430 mm disc diameter (axles/chassis laser aligned) for reduced tire wear and lower fuel consumption Air suspension 1st axle: automatic lift axle with forced lowering and start assist, activated by braking three times; start assist is functional up to 30% axle overload and up to max. 25 km/h. Braking System 24 volt EBS (electronic braking system) with EBS socket at the front (without connection cable); test port for brake cylinder pressure routed outside at EBS module, with raise/lower valve. Paver brake, electrically operated from the truck without truck-side installation; automatic tipping suspension lowering with shut-off valve. TPMS (Tire Pressure Monitoring System) as per ECE R 141; display via screen in the tractor unit through EBS, no truck installation required (system compatibility in tractor unit required; only with standard tires). Axle load detection via EBS CAN-bus signal, displayed in cab; truck must be suitably equipped, no truck-side installation. Wheels and Tires 385/65 R22.5 steel rims Electrics Side amber LED lights synchronized with indicators (flashing side marker lights) 2 white LED position lights at front 2 white/red LED lane marker lights at rear LED work lights on both sides; 2 additional work lights recessed into the rear Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling (fixed, NW 48 mm). (without hose connection) Operated hydraulically via truck PTO. Body Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Angled front wall with external hydraulic cylinder mount. Interior step on front bulkhead. Greenline – conical and aerodynamic body shape "Membrane" rear wall Rear wall is a hydraulically operated tailgate opening upwards, approx. 2,200 mm clearance height Sidewalls continuously 5 mm thick, floor continuously 8 mm thick Body with insulation, Fliegl Asphalt Profi Thermo: body insulated at front, sides, bottom, and rear with Fliegl Isotherm "Flip Top Sliding Cover", automatic rear closure with folding bows. Cover folds forward. Electrically operated cover with 7-pin plug (charging socket) at the front, no connection cable, no truck install; operation at the trailer and via radio remote control. Operating Notes For transporting salt, lime, etc., we recommend using a hoist cylinder with a hard-chromed piston rod to prevent corrosion from the cargo. The stated total weight is technically achievable; depending on the cargo, total weight may not be attainable while observing legal axle, support, and kingpin loads. (Incorrect load distribution may cause poor driving and tracking behavior) Paintwork Frame: DB 7350 Nova Grey (10-year corrosion warranty) Landing legs: black coated Body: RAL 1007 Narcissus Yellow Tarpaulin: RAL 7038 Agate Grey

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902035293, lastna masa: 5.663 kg, največja dovoljena obremenitev: 29.337 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.310 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: modra, zavoro prikolice: prikolica s zavoro, These images are for illustration purposes only (archive images) // Multiple units available! // The vehicle is currently in transit! Chassis: Tipper semi-trailer frame Basic lightweight design, fifth wheel plate with replaceable 2" kingpin, Curved front wall (patented) Central telescopic support leg, uncoupling when loaded not possible; when uncoupled, vehicle must be parked on a rearward incline. 2 wheel chocks with holders Foldable underrun protection Underrun protection with spring assist for easier operation 6 half-shell mudguards Integrated mudguard holder, stone-repellent surface Splash flaps behind the last axle, asphalt version, mounted on hinges on the mudguard, can be hooked to the top of the mudguard, shortened mudguard Tarpaulin support rod with holder 2 rear tow hooks Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift (controllable also electrically from the truck), including forced lowering and start assist, no truck installation required Galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system Color-coded lines for easy service Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connection line 24V EBS (Electronic Braking System) with EBS socket at the front, no connection cable With lift/lower valve Vehicle Stability Control System Ready brake, can be controlled electrically from the truck, no truck installation required Automatic tip lowering with shut-off valve Gjdpfxsyux H Ds Ai Aoiu Trailer Info Module for vehicle data display Axle load detection via EBS CAN bus signal Wheels & Tires 385/65 R22.5" brand at manufacturer's choice Polished aluminum rims Wheel nut protection caps Electrics 24V, multi-chamber lights, yellow LED side markers 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, no connection cables LED work lights mounted on both sides Additional integrated LED work lights at rear Hydraulics High-pressure cylinder (max. 250 bar), lowest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm Operated hydraulically via truck PTO Body (Tipper) Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Angled front wall with external cylinder mount. Interior with ladder on front wall External shovel and broom holder on front wall "Membrane" tailgate Tailgate as pendulum flap, external, with double hook locking. 2 clamp screws with lever locks at lower sides. Holder for pendulum tailgate—can be hooked into the clamp screws Central grain chute Fliegl S.T.E.P.—swiveling front access platform with foldable ladder for side access, front left Body in insulated Fliegl Asphalt Profi Thermo version, metal cladding "Flip Top Sliding Cover"—automatic rear lock with folding bows. Cover folds forward. Electrically operated cover, with 7-pin socket (charging plug) at the front, no connection cable, incl. loose coupling socket for tractor unit, operation on trailer and via remote control. 7-pin spiral cable to truck for sliding cover, socket must be available on truck.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902035294, lastna masa: 5.663 kg, največja dovoljena obremenitev: 29.337 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.310 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.310 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: modra, Leto izdelave: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis Tipping Semi-Trailer Basic lightweight construction, fifth wheel plate with interchangeable 2" king pin Curved front panel Telescopic support leg in center, uncoupling under load not possible Foldable underrun protection Half-shell mudguards Tarpaulin pole with bracket Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis measured by laser 1st axle is automatic lift axle, additionally controllable electrically from the truck, incl. forced lowering and start-up assistance, no truck installation required Brake System 2-circuit compressed air braking system Spring-loaded parking brake 2 unmistakable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connection cable Automatic tipping reduction with shut-off valve Trailer Info Module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages Axle load detection via EBS CAN-bus signal Wheels and Tires 385/65 R22.5 Polished aluminum rims Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white positioning lights at the front in LED 2 white/red lane indicator lights at the rear 2x7-pin and 1x15-pin unmistakable sockets at front Hydraulics Gijdpfx Aieyu Rlls Asu High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body / Dump Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount Internal ladder at front wall Shovel and broom holder externally on front wall Tailgate as pendulum-type, external mounting with double hook locking. 2 clamping screws with toggle latches at lower sides Spacers for pendulum tailgate lockable in the clamping screws Side walls continuously 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design Fliegl S.T.E.P. – foldable access platform at front with foldable step ladder for side access, driver’s side only with "Flip Top sliding cover" Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom and rear with Fliegl Isotherm. Sheet metal cladding "Flip Top sliding cover", automatic rear closure as folding bar. Cover built forward. Electrically powered cover, with 7-pin socket (charging plug at front without connection cable, incl. loose tractor connection, without truck installation, operation on trailer and via radio remote control) 7-pin spiral connection to truck for sliding cover, truck must have appropriate socket Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion and damage from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be reached due to permissible axle/support/kingpin loads. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels); vehicles with tipping bodies are intended for non-chemically aggressive loads. Paintwork Frame: DB 7350 Nova Grey Support legs: galvanized Body: RAL 5002 Ultramarine Blue Roll tarp: RAL 5002 Ultramarine Blue

Stanje: novo, številka stroja/vozila: 824d4741dc933a94e9a7a7a8c, lastna masa: 5.600 kg, največja dovoljena obremenitev: 29.400 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis Semi-trailer tipper Fine-grained steel welded construction in lightweight design, kingpin plate with replaceable 2-inch kingpin Curved front wall, patented Telescopic support leg centrally mounted; uncoupling while loaded is not possible, and when uncoupled, the vehicle must be slanted downhill to the rear. Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holder with stone-repellent surface Splash guard behind the last axle in asphalt configuration, attached to the mudguard with a hinge; includes a hook-in option at the top of the mudguard, mudguard shortened Tow hook at the rear Axles & Suspension SAF drum brake axles Axles/chassis laser measured to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid; activation by pressing brake 3x (starting aid functional up to an axle load increase of 30% and at a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line air pressure braking system, color-coded piping for easy service Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS electronic braking system with EBS socket at front, without connection cable Note: The trailer may only be towed by vehicles that ensure ABS functionality! With raise & lower valve Vehicle driving stability system Wheels and Tires 385/65 R22.5 manufacturer and brand at the manufacturer's choice Steel rims, factory silver Gisdpfx Asi Rix Ssi Asu Electrics 24 volts, multi-chamber lights, side LED marker lights in yellow 2 white position lights at front 2 white/red lane position lights at rear 2 x 7-pin interchangeable sockets at front, without connection cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupling, fixed section, nominal width 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic fittings and access steps at the front wall. Membrane tailgate Tailgate as swing flap, externally mounted with double hook locking. Two clamping screws with toggle latches at the lower sides. Side walls continuously 4 mm thick, floor 4/5 mm thick; construction optimized for wear and weight. Body with insulation, Fliegl Asphalt Profi Thermo; front, sides, bottom, and rear insulated with Fliegl Isotherm. Cover BASIC, tarpaulin cover Standing platform with access ladder, connector plate for air/electric and brakes with large clearance for optimal operability. Roll tarp rolls to right side (FR-right), with central locking on left side (FR-left) Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion and wear caused by aggressive materials. The specified gross weight is technically possible; depending on the cargo, the gross weight may not be achieved while observing legal axle, drawbar, and fifth-wheel loads (poor driving and trailing performance due to incorrect load distribution possible). Country of registration / License plates Germany with Dekra inspection and report (according to §13 EC-FGV) Body stability in accordance with EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles in accordance with RS 10 - 2013 Prepared for single-line li

Stanje: novo, številka stroja/vozila: 7383bc2b7f580f0cb319b52f7, lastna masa: 5.400 kg, največja dovoljena obremenitev: 33.600 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 2.960 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, Further information Chassis / Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable double kingpin Curved front closure—patented Central telescopic support leg; unhitching when loaded not possible; when unhitched, the vehicle must be inclined to the rear. Wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard holder, stone-repellent surface Splash flaps behind the last axle, asphalt version, hinged to mudguard, with top-mount hook option, shortened mudguards Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser aligned to reduce tire wear and fuel consumption Off-road version axles Air suspension 1st axle: automatic lift axle, incl. forced lowering and traction aid Hot-dip galvanized lift axle mechanism—10 years warranty against rust-through Braking system 2-line compressed air brake system, color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupler heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure ABS effectiveness! With lift & lowering valve Vehicle stability control system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System per ECE R 141, display through tractor unit monitor, via EBS, not installed on truck (required truck-side system capability, only for standard tire set). Electrics 24 Volt, multi-chamber lights, side amber LED lighting Amber side LED lighting linked to turn signal—"flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupling, fixed part, NW 48 mm. (no hose connection) Operation via truck PTO Body Round steel trough in Stone Master design made of highly wear-resistant HB 400/450 steel. Inclined front bulkhead with external hydraulic system and ladder at front wall. Membrane tailgate Tailgate designed as pendulum flap, externally mounted with dual hook locking. Two toggle bolts with handwheel side at lower end. Gedpfxji Rix Io Ai Asiu Continuous 4 mm thick sidewalls, floor 4/5 mm thick, wear- and weight-optimized construction, Body in insulated version, Fliegl Asphalt Profi Thermo, trough insulated at front, sides, bottom, and rear with Fliegl Isotherm. BASIC tarp cover, tarpaulin side paneling Standing platform with access ladder, connection bracket for air/electrics and brakes with ample free space for optimal operation. Roll tarp can be secured on the right-hand side, central locking on left side Country of registration / Plates Germany Type approval per EG 2007/46 Body strength per EN 12642 24/7 service hotline Manufacturer’s certificate for thermal vehicles per RS 10 - 2013 Prepared for single-line license plate holder Warning plate as per ECE - 70 Paintwork Chassis: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: galvanized Body/Side tarp: Single color, custom RAL Roll tarp: RAL 7035 light grey Thermal insulation also available in BASICplus (sheet metal cladding) and Premium (stainless steel cladding)!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT23502035606, lastna masa: 5.325 kg, največja dovoljena obremenitev: 26.675 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.490 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: siv, zavoro prikolice: prikolica s zavoro, The images shown are archive photos; the vehicle may still be in use! Chassis - Tipping Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions King pin installed in the front position Curved front wall "patented" 24t 2-speed landing gear, single-sided operation, with semi-circular base and straight mounting plate, with push/pull equalizer Decoupling under load is not possible; when decoupled, the vehicle must be positioned on a rearward slope. Free rear swing clearance approx. 2100mm in rear position and approx. 2600mm in front position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with "spring assist" for easier handling Gjdpfx Aisx Dkpno Aoiu Half-shell mudguards Splash flaps behind last axle, asphalt version, hinged to the mudguard, with stowage option on top of the mudguard, mudguard shortened Tarpaulin rod with holder Tow hook at rear (not for Revolution) Axles & Suspension BPW or SAF drum brake axles, at the discretion of the manufacturer Axles in off-road version "Axle/chassis laser alignment" for reduced tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-assist, activation by "brake 3x" (start-assist operative up to 30% axle load exceedance and to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year warranty against rust-through Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without interconnection cable 24 Volt EBS, electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure effective ABS operation! With raise & lower valve Vehicle stability control system Finisher brake, electrically operable from the truck, without truck installation Automatic tipping lowering with shutoff valve Wheels and Tires 385/65 R22.5" brand at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white front position LED lights 2 rear white/red lane marker lights 1 x 15-pin front socket, without connection cable 1 LED headlight with integrated "Osprey" camera as trough camera (technical approval required upon order) Number of LED flashers at the rear, switched via a cab switch, without truck installation, connected to PIN 12 Pin allocation to be specified upon order! Reversing camera system with color flat-screen monitor, wireless connection to the monitor. Monitor with suction-cup mount and power supply via 24V vehicle socket Registration/Country Plates Germany With Dekra inspection and certificate (acc. §13 EC-FGV) 24/7 service hotline Body stability to EN 12642 Prepared for single-line number plate holder Contour marking with reflective tape acc. ECE R 048, white on sides, red at rear Painting Frame: DB 7350 Nova Grey "10-year warranty against rust-through" Support legs: Black coated Body/sides: Scania Urban Grey 2389173 Sliding tarp: RAL 7038 Agate Grey

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202038273, lastna masa: 5.680 kg, največja dovoljena obremenitev: 29.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 2.680 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis semi low loader for haulage Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with replaceable 2" kingpin Outer frame in low loader design: 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated for 10 t 10 pairs of combined stake pockets with lashing rings (bolted), each rated for 5 t, recessed in outer frame, approx. 72 x 42 mm inner dimensions Outer frame with "Load-Lock profile" for fitting tensioning straps, approx. one hole every 400mm 24 t, 2-speed landing leg with single-sided operation Free swing radius to landing foot approx. 2,500 mm, landing foot width approx. 2,600 mm Extension ladder at rear 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Spray flaps at the rear over entire width Quarter mudguards in front of and behind axle assembly With antispray mudflap only on rearmost axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable In front of axles, 1x left, 1x right 1 storage box, full width, closed, beneath loading floor, approx. w=450 mm/h=400 mm/d=2,460 mm, mounted directly in front of axles 3 tie-down/stake rails with 4 pairs of locking cut-outs, recessed transversely in floor over total width up to outer frame (max. usable internal width between outer stanchions approx. 1,782 mm), approx. 80 mm high. With cut-outs at top and bottom for lashing and fitting stakes 80 x 80 mm. Bottom with angled plate as stop, half open downward. Combined design for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container lock adapters 10 combined plug-in stakes with cut-out at bottom, w=80/ d=50/ l=1,200 mm 6 plug-in stakes w=80/ d=80/ l=1,200 mm, hot-dip galvanized Axles and Suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle auto lift, additionally electrically operable from tractor, including forced lowering and start aid Braking system 2-line compressed air braking system Spring-type parking brake 2 non-interchangeable couplings at front 24V EBS, electronic braking system with EBS socket at front Note: Towed vehicle may only be towed by towing vehicles that guarantee proper functioning of ABS! with raise & lower valve + auto-reset function Vehicle Stability Control System Axle load detection via EBS CAN bus signal, display in driver’s cab Wheels and Tyres 385/65 R22.5" Steel rims "TPMS" tyre pressure monitoring system according to ECE R 141, display via towing vehicle, through EBS Electrics 24 Volt, multi-chamber lamps, side yellow LED marker lights Side yellow LED marker lights linked with indicator “flashing side markers” 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front Gedpfxjzbbpus Ai Asiu 2 additional LED work lights, at rear 1 LED beacon with mounting bracket 2 pairs of LED illuminated warning signs, extendable to 3,000 mm 2 additional LED worklights, top of front wall Additional 7-pin socket in rear underrun guard Floor Slip-resistant screen printing panels approx. 30 mm thick, for high point load, suitable for forklift wheel loads up to max. 7,900 kg "Premium floor sealing", circumferentially sealed joints Front wall / corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner posts steel, volume design Front wall additionally lined inside with 1,250 mm high phenolic plywood "Crash Blocker", bottom inside at approx. 140 mm high, with steel impact protection

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202034509, lastna masa: 4.790 kg, največja dovoljena obremenitev: 33.210 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, 3-axle container semi-trailer Gooseneck Type: SDS 420 Rigid 40" Chassis Semi-trailer for containers Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions Container mounts: 1 x 20-foot centered without steel/chequer plate flooring at the rear 2 x 20-foot, 1 x 40-foot with gooseneck tunnel Front crossmember with folding locks (not available for front extension), supplied free of charge Transport of filled tank containers is excluded. No rear height adjustment and no foldable center supports, transport of container without tunnel not possible. 24 t, 2-speed landing gear, single-sided operation, with semi-round lower part for compensation Gedpozazznofx Ai Aeiu Make: Jost 2 wheel chocks with holders Side underrun protection Rear underrun guard Half-shell mudguards With anti-spray flaps according to EC Rear impact guard Axles + Suspension BPW drum brake axles "Axle/chassis laser alignment" Reduces tire wear and fuel consumption Axle spacing 1310/1410 mm Air suspension Braking system 2-line compressed air brake system Colored pipe layout for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connecting line EBS make Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lifting & lowering valve Vehicle stability system Axle load detection via EBS CANbus signal, for display in the driver's cab, truck must be prepared accordingly – not installed (no calibrated scale) Wheels and tires 385/55 R22.5" Make Fulda with M+S marking Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable 2 additional LED work lights, rear both sides, switched via reversing light Operating instructions Note: Transport of filled tank containers is excluded! Registration country / plates Germany With Dekra inspection and certificate (according to §13 EG - FGV) Prepared for single-line number plate holder Warning plate according to ECE - 70 ADR warning plate at rear, foldable Contour marking with reflective strips according to ECE R 048, yellow on the sides and red at the rear Paintwork Frame RAL 3020 Traffic red "10-year warranty against rust-through" Landing legs black coated

Stanje: rabljeno, največja dovoljena obremenitev: 28.550 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 1.300 mm, prostornina tovornega prostora: 24 m³, Leto izdelave: 2020, Oprema: ABS, Zrak, dvig, BPW-disk, EBS, PVC polovični blatniki, sredinsko oporni pad, aluminijasta platišča, zložljiv UFS, termoizolacija, naležna zadnja stena, pohodna steza z lestvijo, PVC zadnja ponjava, PVC rolo ponjava. Giodey Dy Agjpfx Ai Aju

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2011, skupna dolžina: 12.100 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5, medosna razdalja: 9.250 mm, barva: drugo, Leto izdelave: 2011, = Additional options and accessories = - EBS = Remarks = Number of axles: 3, Payload: 36,200 kg, Unladen weight: 5,800 kg, Gross weight: 42,000 kg, Type of chassis: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, EBS, 2x 20, 1x 30, 1x 40 FT HIGHCUBE // DISC BRAKES // LIFT AXLE = Further information = General information Cab: Day cab Registration number: OL-43-HP Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre size: 385/55R22.5; Lift axle; Tyre tread left: 5 mm; Tyre tread right: 10 mm Axle 2: Tyre size: 385/55R22.5; Tyre tread left: 8 mm; Tyre tread right: 10 mm Axle 3: Tyre size: 385/65R22.5; Tyre tread left: 2 mm; Tyre tread right: 2 mm Weights Unladen weight: 5,800 kg Payload: 36,200 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Condition General condition: Very poor Technical condition: Very poor Visual condition: Very poor Damages: None = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Gjdpfxjy U U R He Ai Ajiu Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive pricing • Honest business practices • Multilingual staff • We understand our customers • Import & transport services • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask us directly about our European warranty packages.

Stanje: novo, Leto izdelave: 2025, barva: bela, Nov in neuporabljen 10-čevljski hladilni kontejner Hladilna enota Thermoking Magnum Plus Hladi do -40 °C Greje do +30 °C = Dodatne informacije = Splošne informacije Leto izdelave: april 2025 Gjdjy Ix D Dspfx Ai Aeiu Modelno leto: 2026 Mere Dimenzije (D x Š x V): 299 x 244 x 259 cm Teža Lastna teža: 2.360 kg Nosilnost: 24.000 kg Dovoljena skupna masa: 26.358 kg Funkcionalnost Hlajenje: od -40 °C do +30 °C Hladilni motor: električni Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Videz: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingh.

Stanje: novo, Leto izdelave: 2025, barva: bela, Nov in neuporabljen 10-čevljski hladilni kontejner Hladilna enota Thermoking Magnum Plus Hladi do -40 °C Greje do +30 °C Gsdjy Ixwdepfx Ai Aoiu = Dodatne informacije = Splošne informacije Leto izdelave: april 2025 Modelno leto: 2026 Mere Dimenzije (D x Š x V): 299 x 244 x 259 cm Teža Lastna teža: 2.360 kg Nosilnost: 24.000 kg Dovoljena skupna masa: 26.358 kg Funkcionalnost Hlajenje: od -40 °C do +30 °C Hladilni motor: električni Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Videz: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingh.

Stanje: novo, številka stroja/vozila: 7d479432c7290a73a46ff6365, lastna masa: 5.000 kg, največja dovoljena obremenitev: 34.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 2.960 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, Further information Chassis: Semi-Trailer Tipper Fine-grain steel welded construction, basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall - patented Central telescopic support, uncoupling under load not possible, vehicle must be parked at a rearward incline when uncoupled. Wheel chocks with holder Foldable underride guard Half-shell mudguards Integrated mudguard bracket, stone-repellent surface Tarpaulin bar with holder Rear towing hook Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Offroad specification axles Air suspension 1st axle automatic lift axle including forced-lowering and start-up assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line air brake system with color-coded lines for easy service Spring-loaded parking brake 2 interlock-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front (no connecting cable) Note: This trailer may only be towed by towing vehicles which ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 Steel rims, factory silver TPMS (Tire Pressure Monitoring System) according to ECE R 141, display via tractor unit, via EBS, not installed in truck (the truck must be pre-equipped; only applicable with standard tires) Electrics Giedei Ri Dpjpfx Ai Asu 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting connected to indicators ("flashing side markers") 2 x 7-pin interlock-safe sockets at the front (without connecting cable) Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, nominal width 48 mm (no hose connection) Actuation hydraulic via truck PTO (power take-off) Bodies Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic system and access at the front wall. Greenline – conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall Membrane rear wall Tailgate as pivoting flap with double hinge, externally mounted with double hook locking system. 2 clamp screws with toggle fasteners at the lower sides Side walls throughout 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized construction Standing platform with access, connection plate for air/electricity and brake, with generous space for optimal operability Roll tarp stowable to the right (FR-right), with central locking on the left (FR-left) Country of Registration / Plates Germany Approval according to EC 2007/46 Body rigidity in line with EN 12642 24/7 Service hotline Prepared for single-row license plate holder Warning plate as per ECE-70 Contour marking with reflective tape according to ECE R 048, white at the sides and red at the rear Paintwork Frame: DB 7350 Novagrey "10-year anti-perforation warranty" Landing legs galvanized Body: RAL of choice, single color Roll tarp: RAL 7035 light grey

Stanje: novo, številka stroja/vozila: 74dd481d88dffaf9218e6ee58, lastna masa: 5.200 kg, največja dovoljena obremenitev: 33.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.110 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, Further information Chassis Semi-Trailer Tipper Fine-grain steel welded construction in lightweight basic design, kingpin plate with replaceable 2” kingpin Curved front end – patented Central telescopic support leg, uncoupling under load not possible—vehicle must be inclined to the rear when uncoupled Wheel chocks with holder Folding underrun protection Half-shell mudguards Integrated mudguard holders, stone-repellent surface Tarpaulin bar with bracket Tow hook at rear Axles & Suspension SAF disc brake axles, 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle automatic lift axle, incl. forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10 years anti-corrosion warranty Braking System 2-line compressed air brake system with color-coded line routing for easy service Spring-loaded parking brake 2 fool-proof coupling heads at front, without interconnecting line EBS electronic braking system with front EBS socket (no connecting cable) Note: Trailer may only be towed by towing vehicles that ensure ABS functionality! With raise & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display in towing vehicle via EBS, not installed on truck (prerequisite must be present in truck, applies to standard tires only) Giedei Ri A Iopfx Ai Aeu Electrics 24V, multi-chamber lights, side yellow LED lighting Side yellow LED lights connected to indicators ("flashing side marker lights") 2 white front position lights 2 white/red lane marker lights at rear 2x 7-pin fool-proof sockets at front, no connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK threaded coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Steel round trough in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic unit and access at the front wall. Greenline – conical and aerodynamic body shape Shovel and broom holders mounted externally on front wall Membrane rear wall Tailgate as pendulum flap with double hinge, outer mounted with double hook lock; 2 clamping screws with toggle locks at the bottom sides Side walls 4 mm throughout, floor 4/5 mm, wear- and weight-optimized construction Standing platform with climbing access, connection plate for air/electricity and brakes with large free clearance for best operability Roll tarp stored to FR-right side, central locking on FR-left Country of registration/plates Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7-service hotline Prepared for single-line license plate bracket Warning board according to ECE 70 Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Paintwork Frame: DB 7350 Nova Grey "10 years anti-corrosion warranty" Support legs galvanized Body: RAL color of choice, single-color Roll tarp: RAL 7035 Light Grey

Stanje: novo, številka stroja/vozila: 637ca014c140e4e48dc3231a0, lastna masa: 5.700 kg, največja dovoljena obremenitev: 33.300 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.700 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 31 m³, skupna dolžina: 9.090 mm, skupna širina: 2.550 mm, skupna višina: 3.110 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction in Basic lightweight design, with saddle plate and replaceable 2" kingpin Curved front panel (patented) 24 t 2-speed landing gear, single-sided operation, with straight lower section, without stroke compensation Wheel chocks with bracket Foldable underrun protection Half-shell mudguards Integrated mudguard bracket, stone-repellent surface With antispray mudflap only on last axle Tarpaulin bar with holder Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Brake System 2-line compressed-air braking system, color-coded line routing for easy servicing Spring-loaded parking brake 2 interchange-proof coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System, compliant with ECE R 141, displayed on tractor display via EBS, without truck installation (functionality must be available in the truck; applies only to basic tires) Electrics 24 Volt, multi-chamber lights, lateral yellow LED lights Lateral yellow LED lights, synchronized with blinker "flashing side marker lights" 2 x 7-pin, interchange-proof sockets at front, without connection cable Hydraulics Low pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Hydraulic operation via truck PTO Body Steel round dump body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic cylinder mount. Access step inside on front wall. Giedpfxsi Rivds Ai Aou Greenline – conical and aerodynamic body shape Shovel and broom holder outside on front wall. Membrane rear wall Rear wall as pendulum tailgate with double joint hinge, external with double hook locking. Two clamping screws with wing closures at the lower sides. Continuous side walls, 4 mm thick; floor 4/5 mm thick, wear- and weight-optimized construction Standing platform with access ladder, connection plate for air/electrics and brake, with generous clearance for best possible operation Roll tarp can be placed one-sided on R-rear, with central locking on L-rear Registration country / plates Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame: DB 7350 Nova Grey "10-year anti-corrosion warranty" Landing legs: powder-coated black Body: RAL color of choice, single-color Roll tarp: RAL 7035 light grey

Stanje: novo, številka stroja/vozila: 2f960ff7c44de83fd060ec5df, lastna masa: 6.750 kg, največja dovoljena obremenitev: 32.250 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 50 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 3.670 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction, lightweight basic design, fifth-wheel plate with exchangeable 2" kingpin Curved front end patented 24 t, two-speed landing gear, single-sided operation, with straight base, without thrust compensation Wheel chocks with holder Giodpfx Aiei Rizfs Asu Folding underrun protection Half-shell mudguards Integrated mudguard bracket, stone-repellent surface Tarp bar with holder Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Braking System 2-line air brake system, color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at front, without interconnection EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the functionality of ABS! With raise/lower valve Vehicle driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire pressure monitoring system (ECE R 141), display via screen in towing vehicle via EBS, not installed in truck (truck needs to be prepared; system only for original tires) Electrics 24 Volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to turn signal, "flashing side markers" 2 x 7-pin foolproof sockets at front, without interconnecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel half-pipe body made of highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mount. Shovel and broom holders outside on the front wall. Climbing access inside at front wall. Side walls continuously 3 mm, floor continuously 3 mm thick Membrane rear wall Internal width at base approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double joint hinge" and two-leaf door split (1/2 to 1/2), overhead swing bar, each door with its own grain chute Standing platform with access, connecting plate for air/electric and brake with large clearance for optimal operability Rolling tarp to be stowed to the right in direction of travel, with central locking on the left in direction of travel Approval Country/ Registration Germany Type approval in accordance with EC 2007/46 Body strength as per EN 12642 24/7 Service Hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective strips acc. to ECE R 048, white on sides and red at rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against corrosion" Body: Single color to RAL selection Rolling tarp: RAL 7035 light grey

Stanje: novo, številka stroja/vozila: aaa375d3c15c697ac80fb51f9, lastna masa: 7.900 kg, največja dovoljena obremenitev: 31.100 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.950 mm, prostornina tovornega prostora: 50 m³, skupna dolžina: 11.200 mm, skupna širina: 2.550 mm, skupna višina: 3.470 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, Further information Chassis - Tipping Semi-Trailer Fine-grain steel welded construction, lightweight design, with slight cranking, kingpin plate fitted with replaceable 2" kingpin 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensation adjuster Wheel chocks with holder Folding underrun protection Half-shell mudguards Integrated mudguard holder with stone-repellent surface Tarp rod with holder Tow hook at the rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle function, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake System 2-line compressed air braking system, color-coded pipe routing for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting pipe EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: The towed trailer may only be hauled by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve Vehicle stability control system Wheels & Tires 385/65 R22.5 Steel rims in factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via truck display, via EBS, not installed on truck (vehicle must be preequipped for this; only applies to standard tires). Electrics 24 volt, multi-chamber lights, yellow LED side lighting Yellow LED side lighting synchronized with indicators ("flashing side marker lights") 2 white position lights at the front 2 white/red lane guide lights at the rear 2 x 7-pin foolproof sockets at the front, without connection cable Giedpfxsi Rizqe Ai Aeu Hydraulics Low-pressure cylinder max. 170 bar, base stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Steel trough made of highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mount. Folding aluminium fender at front right for sliding tarp. Shovel and broom holder on outer front wall. Internal ladder at front wall. Side walls 4 mm thick throughout, floor 5 mm thick throughout Tailgate (membrane type) Rear wall with dual-wing doors split 1/2 to 1/2, with 1 slider in the right wing. With external locking bar and mechanical lower lock, Platform with access steps, connection plate for air, electrics and brakes with large free clearance for optimum usability. Roll tarp stored on front right, with central locking on front left. Registration/Country Plates Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective strips according to ECE R 048, side white and rear red Painting Frame: DB 7350 Novagrau 10-year anti-corrosion warranty Landing legs: coated black Trough: Single color as per customer RAL request Roll tarp: RAL 7035 light grey

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks from order Country of origin: Germany Price: €2292.56 Drilling capacity in structural steel: 10 mm Mounting: B 16 Throat depth: 220 mm Speeds: 250 - 3000 rpm Motor: 0.45 kW Length: 320 mm Width: 520 mm Height: 820 mm Weight: 44 kg Quill stroke: 60 mm Distance spindle - table: 140 - 315 mm Table: 300 x 250 mm Column diameter: 70 mm Continuous/normal drilling capacity: 10/12 (in E335/ST60) Robust, high-quality, and inclined rotary cover for easy reading of speed LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed adjustment via central rotary knob Emergency stop button Thermal overload protection Undervoltage release Drill guard with electrical safety interlock Power cable with Schuko plug (1.2 m) 3-year warranty for single-shift operation Item no. 217.400 with drill head height adjustment Gijdpsy Hf Rbjfx Ai Asu OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drilling package 2 (vice & quick-action drill chuck)

Stanje: dober (rabljeno), Koda: 0382 Znamka: ALBERTI Model: BASIC PLUS CN - CE standard CNC obdelovalni center za pohištvo in okovje – CE standard Vrhunski vertikalni "točka-do-točka" vrtalni stroj s kontinuiranim podajanjem, z avtomatskim vpenjanjem in vzdolžnim premikanjem plošč ter monolitno konstrukcijo iz elektrovarjenega jekla. Avtomatsko neodvisno upravljanje treh osi z optimiziranimi cikli vrtanja in vstavitve. Dimenzije obdelovanca (plošče): Maks. 3000 x 1200 x 60 mm Min. 300 x 110 x 15 mm (avtomatsko podajanje/izvzemanje) Min. 300 x 110 x 8 mm (ročni vnos/izvzem) Monoblok konfiguracija z neodvisnimi vreteni: - 16 neodvisnih vertikalnih vreten, razmak 32 mm, vzdolž Y-osi (sestavljanje) - 3 horizontalne vrtalne glave z dvojnim izhodom v smeri X, razmak 32 mm in vertikalni pritiskač, nameščeno ob strani monobloka - 10 neodvisnih vertikalnih vreten, razmak 32 mm, razporejenih vzdolž X-osi (okovje) - 1 horizontalna vrtalna glava z dvojnim izhodom v smeri Y in vertikalnim pritiskačem Konfiguracija delovne mize: - Dovajalna sekcija z ravnimi valji, prevlečenimi s PVC - Uporabna dolžina za podporo plošče: 2000 mm - Uporabna širina za podporo plošče: 840 mm - Referenčna površina v notranjosti stroja z brušenimi prostovrtečimi valji, prevlečenimi s PVC, uporabna širina za podporo plošče: 1000 mm - Višina delovne površine: 920 mm, nastavljiva +/- 30 mm - Odtokovna sekcija z ravnimi PVC valji - Uporabna dolžina za podporo plošče: 2000 mm - Uporabna širina za podporo plošče: 840 mm - Vodilna letev z avtomatskim pozicioniranjem - Vertikalne sponke na vodilni letvi, avtomatska nastavitev glede na debelino obdelovanca prek pnevmatskih cilindrov - Vakuumska črpalka 40 m³ Rezkalna enota "električno vreteno" 9 Hp Orodje HSK-63F za sistem avtomatske/ročne menjave orodja. Izbira hitrosti preko programa (12.000/18.000 vrt/min) – Zmogljivost rezkanja v smereh X in Y, linearno ali interpolirano, glede na tehnične omejitve stroja. Možnost vrtenja v desno ali levo. Največji premer orodja Ø 40 mm – 1x HSK-63F vretensko držalo vključeno. Avtomatski menjalec orodja Opremljen s 4 mesti za avtomatski prevzem orodij z najvišjim premerom 40 mm. Vključuje komplet 4 držal za konus ISO 30. Združljiv z rezkalno enoto – 1x HSK-63 konus vključen. Enota za krožno žago: Neodvisen motor z močjo 1,8 Hp, hitrost 12.000 vrt/min, omogoča rezanje utorov v X in Y smereh v okviru tehničnih zmožnosti stroja. Namestitev orodja z objemko, največji premer izvrtine Ø 120 mm, največja debelina 8 mm. Krmilna konzola in numerična krmilna enota ALBNT (TPA): operacijski sistem Windows XP – programska oprema ALBATROS TPA Vgrajena moč: 12 kW Godey R U Abopfx Ai Aoiu Stisnjen zrak: 6/7 bar Odsesavanje: hitrost 30 m/s – Pretok 8686 m³/h Skupne dimenzije: glej priloženi list Teža: 3.500 kg

Stanje: novo, Zustand neu Lieferzeit ca. 2 - 4 Wochen ab Auftr Ursprungsland Deutschland Preis 2792.28 € Bohrleistung in Baustahl 10 mm Aufnahme B 16 Ausladung 220 mm Drehzahlen 250 - 3000 U/min Gsdsy Hf Rzopfx Ai Asiu Motor 0,45 kW Länge 320 mm Breite 520 mm Höhe 820 mm Gewicht 44 kg Pinolenhub 60 mm Abstand Spindel - Fuß 140 - 315 mm Tisch 300 x 250 mm Säulendurchmesser 70 mm Dauer-/Normalbohrleistung 10/12 (in E335/ST60) Robuste, qualitativ hochwertige und geneigte Rotations-Haube für einfaches Ablesen der Drehzahl LED-Beleuchtung Schnell verstellbarer und ergonomischer Bohrtiefenanschlag Stufenlose Drehzahlregelung über mittigen Drehknopf NOT-AUS-Schlagtaster Thermischer Überlastungsschutz Unterspannungsauslöser Bohrschutz mit elektr. Absicherung Anschlußkabel mit Schuko-Stecker (1,2 m) 3 Jahre Garantie bei Einschichtbetrieb Art. - Nr. 217.410 mit Zwischentisch und Tischhöhenverstellung über Zahnstange OPTIONEN: Maschinenschrank mit Tür und Schublade Bohrpaket 2 (Schraubstock & Schnellspannbohrfutter)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, največja hitrost vretena: 5.000 obr/min, Premer palice (maks.): 26 mm, skupna širina: 2.200 mm, skupna višina: 2.200 mm, potovalna razdalja osi X: 78 mm, pomik osi Y: 210 mm, skupna masa: 2.900 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840D with EMCO specials, število osi: 4, This EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum workpiece length of 600 mm. The machine is equipped with a powerful spindle speed range of 0-5000 rpm and a tool changer with 24 stations. If you are looking for a high-quality lathe, you should consider the EMCO Turn 420 MC Plus multi-spindle lathe, which we are offering for sale. Please contact us for further details. • Condition: Very good; connected and ready for testing • Technical Data: • Travel over cross slide: 160 mm • Main spindle to counter spindle: 408 mm • Max. turning diameter: 100 mm • Max. workpiece length: 600 mm • Max. bar stock diameter: 26 mm • Travel paths: • X/Z: 78 mm • Main spindle: • Max. torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (front ID): 60 mm • Spindle bore: 38 mm • Counter spindle: • Speed range: 0-5000 rpm • Torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (ID): 60 mm • Clamping length (Ø26 mm): approx. 100 mm • Travel (Z2): 233 mm • C-Axis: • Resolution: 0.001° • Rapid traverse: 1000 rpm • Positioning: 3° • Drive power: • Power: 9 kW • Tool changer: • Tool stations: 2 × 12 • VDI shank: VDI 16 • Tool size (square): 16 × 16 mm • Boring bar diameter: 25 mm • Indexing time: 0.4 sec • Driven tools: • Speed range: 0-5000 rpm • Max. torque: 3 Nm • Max. power: 1.6 kW • Number of tools: 2 × 4 Giedey E Sp Uepfx Ai Aou • Feed drives: • Rapid traverse X/Z; X1/Z1: 12/20 m/min • Feed force X: 3000 N • Feed force Z: 3000 N • Acceleration time: 0.1 sec • Coolant system: • Tank capacity: 200 L • Pump power: 0.57 kW • Power consumption: • Connected load: 15 kVA • Supply pressure: 6 bar • Flow rate: 300 L/h • Dimensions: • Center height (top/bottom): 1179 / 1030 mm • Footprint (W × D): 2200 × 1386 mm Additional Equipment • Includes accessory kit and tool holder Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.000 mm, skupna širina: 4.000 mm, skupna višina: 3.130 mm, notranja višina: 2.700 mm, notranja dolžina: 6.900 mm, notranja širina: 3.900 mm, Oprema: kabina, An automotive spray booth is a fundamental piece of equipment for refinishing technology, enabling painting operations to be carried out safely and comfortably while minimizing their negative impact on the immediate surroundings and the environment. Specifications: - External dimensions: 7000x4000x3130 mm - Internal dimensions: 6900x3900x2700 mm - Entrance gate: 3000x2600 mm (three-leaf) - Service door: 640x1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7kW - Installation: indoor use only Spray booth wall construction: - Wall thickness: 50 mm - Core: EPS polystyrene - Colour: white Spray booth base: - The booth is installed directly on the floor/screed - Booth intended for indoor installation only Double roof: - Upper external layer - Corrugated steel sheet panels - Internal structure - Partially latticed Air change system (supply system): - Jet fan 5.5kW – 1 unit - Airflow capacity: 20,000 m³/h Giedsxnbf Uopfx Ai Aju - Belt-driven transmission - No air recirculation control Lighting (Side lights): - Side lamps: 20 units - No possibility to fit top lighting Air heating system: Single-stage Riello G10 oil burner 54-120 kW - Burner control: manual - Heat-up time: 20 minutes Booth access: Main door: - Dimensions: 3200x2600 mm - Three-leaf door system Service door: - Booth fitted with a service door - Equipped with pressure locks Booth filtration: - Intake: Pre-filter Ceiling filter: Primary (high-flow) filtration Filter specifications: - Weight: 600g/m³ - Thickness: 50 mm - Airflow: 900m³/h - Collection efficiency: 97% - Air velocity: 0.25m/s - Dust holding capacity: 650g/m³ - Max. temp.: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1

Stanje: rabljeno, prevoženi kilometri: 21.900 km, moč: 315 kW (428,28 KM), prva registracija: 06/2024, vrsta goriva: dizel, lastna masa: 15.507 kg, skupna masa: 26.000 kg, velikost pnevmatike: 385/65 R22,5 - 315/80 R22,5, konfiguracija osi: 6x2, medosna razdalja: 4.300 mm, gorivo: dizel, energetska učinkovitost: E, zavore: VEB (Kombinat državnih podjetij), barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 9 m³, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 900 mm, Oprema: ABS, AdBlue, EBS (Elektronski zavorni sistem), asistent za ohranjanje voznega pasu, dodatne luči, elektronski program stabilnosti (ESP), nadzor oprijema, navigacijski sistem, parkirni grelec, spojka prikolice, tempomat, zapora diferenciala, žerjav, Rezervoar za sečnino (AdBlue) Prostornina 12.777 cm³ 50 mm priklop za prikolico Hidravlika (pomožni pogon) Nizka raven hrupa Godpfxeym N I As Ai Ajiu Lahka aluminijasta platišča Sistem za opozarjanje na razdaljo Asistent za ohranjanje voznega pasu Nosilnost 10.493 kg Samodejna klimatska naprava Euro 6 E Listno-zračna dvižna vzmetenje Meiller dvostranski prekucnik Vezni obroči v tleh/stranici Drsnik za asfalt Navijalna ponjava Zložljiva podvozna zaščita Atlas AK 135.2 E-10,30/3 A3 Senčnik Svetlobni lok Rotacijske luči Vzvratna kamera Kabina na zračno vzmetenje Zračne troblje 1 ležišče Hladilna skrinja Alcoa Dura Bright 405 l dizla / 90 l AdBlue Skupna dovoljena masa sestava 63.000 kg Prikolica SDAH 26.000 kg Gentijansko modra Sledilna krmiljena os Možne napake pridržane

Stanje: novo, Leto izdelave: 2026, Standard equipment: - Robust, high-quality, and inclined rotary cover for easy reading of the speed - LED lighting - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control - Connection cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical interlock - Thermal overload protection - Emergency stop push-button Weight in kg: 44 Motor power kW: 0.45 Single-phase 230 V Giedpsihipzsfx Ai Aou Speed rpm: 250–3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminum Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Throat 220 mm - Column diameter 70 mm - Usable table area (W x L) 300 x 250 mm - T-slot size | Number 2, spacing 100 mm Dimensions width 14/26 mm - Spindle: B16 - Speed display: Digital - Drilling depth display: Scale - Drill depth stop: Quickly adjustable stop ring - Feed: Manual Option DRILLING PACKAGE 1 – Price: €272 – Vise [felix] 2.0 80 – Quick-release drill chuck B16 1–13 mm (accuracy 0.17 mm) - FACTORY WARRANTY: 3 years - Free delivery including packaging NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! REQUEST A QUOTE!

Stanje: zelo dobro (rabljeno), Thermo Scientific Vötsch Model: UT 6420 For sale: Professional laboratory and industrial drying oven / heating oven Thermo Scientific / Vötsch Industrietechnik – Model UT 6420. This unit is suitable for drying, heating, tempering, and thermal treatment of materials and components at precisely controlled temperatures up to 300 °C. Typical applications include laboratories, industry, workshops, research, electronics and material testing. The stainless steel inner chamber ensures uniform heat distribution and is designed for continuous operation. Interior: Stainless steel with adjustable shelves External dimensions approx.: 170 × 70 × 80 cm (H × W × D) Technical Data: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Model: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Giedpfxox Hf Uao Ai Aju Weight approx.: 200–230 kg Condition: Used Scope of delivery: (See pictures) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.