Ferromatik Milacron Ferromatik Milacron Ee180-300/2F (2014) nakup rabljenega (15.954)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Natezna sila: 180 t Tip: Večkomponentni Hfsdpfx Aszypnzsh Hjl Pogon: Električni

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Natezna sila: 180 t Hjdpfx Ajzypadjh Hofl Tip: Večkomponentni Pogon: Električni

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Natezna sila: 180 t Tip: Večkomponentni Hfodpfx Ahozyn Els Hjl Pogon: Električni

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Ferromatik Milacron K110D-S/2F / 2K Injection Moulding Machine Year of manufacture: 1998 Injection unit: Screw diameter: 30 mm Shot weight: approx. 85 g Injection pressure: 2298 bar Dosage volume: 99 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Platen size: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Ferromatik Milacron Additional equipment: 2-component injection moulding machine Euromap 67 Robot interface Hydraulic core pulls x 4 Control system with hot runners Injection unit is wear-resistant and corrosion-resistant Screw diameter in vertical injection unit: ⌀25 mm – approx. 43 g/PS The machine has been regularly serviced Recently, the service center replaced the machine's cylinder with the screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m Hedpfozy Iikjx Ah Hefl All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 55.000 h, vpenjalna sila: 110 kN, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.543 letvica, skupna masa: 7.200 kg, premer polžastega transporterja: 30 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Hodpfxsy Ntl Ss Ah Hjfl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 4.108 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 591343, vpenjalna sila: 1.550 kN, For sale is an injection moulding machine from Ferromatik, model K-TEC 155 S / 2F. The machine is in excellent condition. Please note the low operating hours—only 4,108 h. Technical data: Year of manufacture: 2005 Clamping force: 1,550 kN Tie bar spacing (H x V): 500 x 500 [560 x 560] mm Mould opening stroke: 650 mm Max. platen distance: 950 [1150] mm Mould installation height: 300 [500] mm Opening force: 86 kN Screw diameter 1: 50 mm Screw diameter 2: 40 mm Max. injection pressure: 1,568 bar Max. shot volume: 314 cm³ Electrical connection: 40 kW Machine dimensions (L x W x H): 5,500 x 1,700 x 2,400 mm Weight: 7,800 kg Oil tank capacity: 480 l Optional: Loading onto truck and transport throughout Europe can be arranged for an additional charge. Prices plus VAT. Viewing possible by appointment. Please contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you wish to sell your machine? Hfjdpet Tdptefx Ah Hol For further information or to get in touch, visit our website.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 40.885 h, skupna masa: 6.500 kg, delovna prostornina: 49 cm³, vpenjalna sila: 110 kN, tlak vbrizgavanja: 2.236 letvica, premer polžastega transporterja: 18 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Hfedpow N Egajfx Ah Hjl Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: dober (rabljeno), Leto izdelave: 1996, obratovalne ure: 32.750 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 266568, vpenjalna sila: 750 kN, premer vijaka: 3.025 mm, delovna prostornina: 8.549 cm³, Here we offer a very well-maintained, regularly serviced injection moulding machine. We are also happy to accept well-kept machines built from 2005 onwards in part exchange. Please offer us your surplus machines. Fully functional 2-colour injection moulding machine K75-S 2F in L-configuration Year of manufacture: 1996 International size: 750H 200/100 L Operating hours: 32,750 h Control system: IQT 6 (German language) Machine No. 266568 Hfsdpfxecud Nhe Ah Hjl Clamping unit (extended tie bars +200 mm) Clamping force: 750 kN / 75 tons Tie bar distance: 420 x 420 mm Max. platen spacing: 850 mm Min. mould height: 400 mm Mounting platens: 605 x 605 mm Ejector force: 34 kN Ejector stroke: 150 mm Centre ring: 125 mm (nozzle/ejector plate) Injection units +++1st Unit+++ Horizontal injection unit (int. size 200) Screw diameter: 30 mm Shot volume: 85 ccm Injection pressure: 2350 bar 4 heating zones +++2nd Unit+++ Vertical injection unit (int. size 100) Screw diameter: 25 mm Shot volume: 49 ccm Injection pressure: 2022 bar 3 heating zones Extras: Pressure accumulator Core pull Water manifold Hopper Dimensions / Electrical Data Motor: 30 kW Heater: 11.7 kW Weight: 5,100 kg Dimensions: 4.5 x 1.5 x 2.5 m (LxWxH) Paintwork: RAL 7016, 7035, 1012 Availability: Available from our warehouse in Hanover, loaded free onto the buyer’s truck or delivered to destination at cost, insured. ALL MACHINES WE OFFER ARE OUR SOLE PROPERTY

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Ferromatik Milacron K-TEC 350-2650 / Production line with Sepro robot Year of manufacture: 2017 Injection unit: Screw diameter: 70 mm Shot weight: 1104 g Injection pressure: 2175 bar Dosage volume: 1213 cc Clamping unit: Clamping force: 350 t Tie bar distance: 750x750 mm Platen size: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MOSAIC - touchscreen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 3 Control with hot runner Hardened injection unit – bimetallic Proportional valve on injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Energy-efficient machine – equipped with a system with 3 hydraulic pumps with variable output Machine has been regularly serviced by authorized service in Germany Dimensions: Weight: 22,000 kg Hfedpfx Aezy Ii Deh Hel Length/Width/Height: 8.62x2.21x2.80 m All listed machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Hfsdpfxezy Iiqe Ah Hol Clamping Unit: Clamping force: 150 t Tie bar spacing: 510 x 510 mm Platen dimensions: 740 x 740 mm Ejector: hydraulic Clamping mechanism: toggle lever Control: B&R touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x1 Hydraulic core pull x1 Hot runner control unit x36 (available at extra cost) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor driven by frequency inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast cycles) Wemo 6-5 xDesign robot Year of manufacture: 2017 4-axis robot: 3 axes driven by electric servo motors Robot safety package Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor for an additional charge Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR

Stanje: rabljeno, Nosilec za transport K140 1-82745500 329 € Teža enega kosa: 21 kg Hfodpfeztw Iijx Ah Hsl 4 kosi pritrdilnih členov 1.291 € Okovje 1774874610 Teža enega kosa: 2,35 kg Račun je na voljo v dokumentih!

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Ferromatik Milacron K-Tec 250 S, Letnik izdelave 2008, Krmilni sistem Moasic Control, Hod odpiranja orodja 850 mm, Premer vijačnega valja 60 mm, Vbrizgni tlak 2144 bar, Sila zapiranja 2500 kN, Maksimalna količina vbrizga 694 gramov, Nameščena moč grelnika 22,7 kW, Števec ur delovanja 5100 ur, Masa stroja 18.000 kg. Hfedpezub Hrofx Ah Hol

Stanje: rabljeno, Ferromatik mešalni polž Ø 70 mm za IU2495 in IU2650 – izbran iz Ferromatik K-Tec 450 - izbran iz IU2495 Hsdpeyxg Tbsfx Ah Hjfl - odstranjen iz delujočega stroja - popolnoma funkcionalen - Vhod: 69,80 mm - Sredina: 69,80 mm - Izhod: 69,80 mm - Skupna dolžina: 225,80 cm Proizvajalec: Ferromatik Milacron

Stanje: rabljeno, Leto izdelave: 1991, obratovalne ure: 2.000 h, Machine designation: Used injection moulding machine Manufacturer: Ferromatik Milacron (Klöcker) Model: FX50 R 35 Year of manufacture: 1991 Operating hours: 2,000 hrs Drive motor: 15 kW Dimensions: L 4,300 x W 1,400 x H 2,200 mm Net weight: 3,400 kg Technical documentation: Yes Remarks: General data: Dry cycle time: 40 s Pump drive: 15 kW Total connected load: 25.7 kW Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm Injection pressure: 1,730 bar Stroke volume: 116 cm³ Screw stroke: 120 mm Max. shot weight: 99 g Max. injection rate: 505 g/s Calculated injection power: 15 kW Plasticising rate: 29 g/s Screw length: 22 L/D Max. screw speed: 430 rpm Max. screw torque: 360 Nm Installed heating capacity: 10.7 kW Number of heating zones: 5 Nozzle contact force: 65 kN Clamping unit: Clamping force: 500 kN Mould opening stroke: 350 mm Min. mould installation height: 200 mm Max. platen distance: 550 mm Ejector force: 34 kN Ejector stroke: 150 mm Hedpfx Ahjxl R Sxo Hefl Max. column spacing: 355 x 355 mm Max. platen size: 540 x 540 mm Accessories: With two mould temperature control units Condition: Used Price: On request

Stanje: dober (rabljeno), Leto izdelave: 2023, obratovalne ure: 50 h, Merk Ferromatik Milacron GmbH Type eQ-280 - 2290 Bouwjaar 2023 Bedrijfsuren 50 uur Sluitkracht 2.800 kN Schroefdiameter 60 mm Injectiedruk 2.238 bar Maximaal schotvolume 905 cm3 Maximale afstand tussen de kolommen 710 x 660 mm Hfsdpfx Aow Ebpweh Hel Minimale matrijshoogte 250 mm Maximale afstand tussen de platen 1.400 mm Afmetingen (LxBxH) 8.500 x 2.100 x 2.500 mm Gewicht 18.400 kg

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 555172, vpenjalna sila: 275 kN, premer vijaka: 60 mm, delovna prostornina: 763 cm³, Naprodaj je brizgalni stroj Ferromatik Milacron K 275 S Tehnični podatki: Tip: K 275 S, serija K-TEC Serijska številka: 555172 Hsdpfoy Ep Dgjx Ah Hjfl Letnik: 1998 Zapiralna sila: 275 kN Razmak med vodili: 630x630 mm Premer polža: 60 mm Maks. gibalni volumen: 763 cm³ Število grelnih con: 5 Vgrajena moč gretja: ca. 18 – 25 kW Dimenzije: 7,5 x 2,2 x 2,7 m Neto masa: 15.500 kg Na željo lahko organiziramo prevoz in nakladanje po vsej Evropi za doplačilo. Cene so brez DDV. Ogled možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem svetuje. Možna je tudi menjava ali kompenzacija! Prodaja in odkup strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV TER DRUGE OPREME. Potrebujete kakovosten, a cenovno ugoden stroj za kovinsko obdelavo za vašo proizvodnjo? Ali pa želite prodati svojega? Za več informacij ali kontakt obiščite našo spletno stran.

Stanje: dober (rabljeno), vpenjalna sila: 4.500 kN, premer vijaka: 60 mm, razmak između stupova: 800 mm, delovna prostornina: 795 cm³, skupna dolžina: 8.500 mm, skupna širina: 2.300 mm, skupna višina: 2.400 mm, skupna masa: 22.000 kg, Tehnični podatki: Hfjdeyx Evuepfx Ah Hel Zapiralna sila: 4500 kN (450 t) Odpiralni hod: 800 mm Svetla razdalja med stebri: 800*800 mm Premer polža: 60 mm Prostornina hoda: 795 m³ Skupna teža: 22.000 kg Dimenzije: 8,5 m*2,3 m*2,4 m

Stanje: dober (rabljeno), Leto izdelave: 2006, vpenjalna sila: 1.550 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, Brizgalni stroj Ferromatik Milacron Elektra 155 Proizvajalec: Ferromatik Milacron Europe Model: Elektra 155 Evolution Tip stroja: EE 155 Št. stroja: 427077 Hedpoythvrjfx Ah Hofl Leto izdelave: 2006 Zapiralna sila: 1550 kN Mednarodna velikost: 1550H-300 Vbrizgalni tlak: 2500 bar Prostornina hoda: 113 cm³ Premer polža: 30 mm Moč motorja: 19,7 kW Grelnik: 10,2 kW Teža pribl.: 7,4 t Delovne ure: 77022 h

Stanje: rabljeno, Leto izdelave: 2007, Technical details: Hfedsymfk Hepfx Ah Hsl Clamping force: 3,500 kN Approx. machine weight: 17 t

Stanje: rabljeno, Leto izdelave: 2014, Ulma Taurus 300 traysealer Hsdpfx Ajvvk Hbeh Hofl Dodatne informacije uskoro.

Stanje: skoraj kot novo (rabljeno), Črpalka Grundfos MGE100LA 2-FF215-JA-300 3,00 kW Število vrtljajev: 2900 – 4000 vrt/min Teža: 24 kg Z veseljem vas pričakujemo na ogledu. Z veseljem vam lahko uredimo ugoden prevoz! Hsdpozzmhzjfx Ah Hsfl Prejeli boste ustrezno račun. Za tuje stranke lahko izdamo tudi neto račun. Pogoj je veljavna številka za identifikacijo za DDV. Pridržujemo si pravico do vmesne prodaje. Obiščite našo spletno trgovino in si oglejte tudi naše druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in se uporabljajo samo za identifikacijo in opis izdelkov. Odstopanja od tehničnih podatkov in napake v opisu izdelka so možne in so pridržane.

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Clamping force: 3000 kN, holding force: 3300 kN, max. opening stroke: 670 mm, min. mould installation height: 330 mm, max. mould installation height: 710 mm, max. distance between platen surfaces: 1380 mm, platen size: 1040 x 950 mm, clear column spacing: 720 x 650 mm, max. mould weight: 4.7 t, max. weight on moving platen: 2.4 t, max. weight on fixed platen: 3.6 t, ejector stroke: 200 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 50 mm, L/D ratio: 20, injection pressure at 400°C: 2426 bar, shot volume: 530 cm³, shot weight (PS): 480 g, max. dosing stroke: 270 mm, max. nozzle stroke: 470 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 110 kN, installed cylinder heating: 14.8 kW, material hopper volume: 110 l, oil tank capacity: 700 l, electric screw drive: 38 kW, electric drive clamping unit: 37 kW, pump aggregate power: 22 kW, installed total power: 112 kW, continuous sound pressure level: 78 dB(A), length: 6500 mm, width: 2000 mm, height: 2300 mm, weight: 15.7 t, PLC operating hours: 28,890 h, cylinder heating: 35,656 h, pump: 27,922 h, documentation available. An on-site inspection is possible. Hfsdjy Tx Rnjpfx Ah Hjl

Stanje: pripravljen za uporabo (rabljen), Edur centrifugalna črpalka NUBX 300 A1 Fe/50Hz, serijska številka: 35119, z motorjem Siemens 1LA7073-2AA99-ZN00/DU. Rabljen, dobro ohranjen, 100-odstotno delujoč. Obseg dobave glede na fotografije. Hfsdpfxezkc U Aj Ah Hsl

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 18092 Manufacturer: ENGEL Model: ES 1350H 200W / 300HL-2F Year of manufacture: 2001 Clamping Unit Clamping force: 300 tons Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection Unit Screw diameter: 60 + 35 mm Injection volume: 735 + 135 cm³ Shot weight (PS): 662 + 122 g Injection pressure: 1834 + 1620 bar Dimensions and Weights Dimensions LxWxH: 7.75 x 2.35 x 2.6 m Machine weight: 24,780 kg Additional Information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This injection moulding machine from the renowned Austrian manufacturer ENGEL, built in 2001, is for sale. It features a clamping force of 300 tons and a genuine 2K L-configuration in a horizontal design. Motor and Hydraulic System The machine is equipped with a powerful electric motor and a connected high-pressure hydraulic pump unit. The electric motor continuously drives the hydraulic pump, ensuring a constant supply of pressurised oil throughout the system. This oil powers the clamping cylinder, the injection rams of both injection units, as well as the ejector system. The thick red hydraulic hoses behind unit B transport this high-pressure oil flow—both units are supplied via independent hydraulic circuits, allowing injection unit A and B to operate simultaneously without interfering with each other. Operating Principle Hedpfx Aswm Iy Ejh Hofl Both independent injection units are arranged at a 90° angle to each other—in an L-shape. The mould is locked with a clamping force of 300 tons. Unit A injects the main material into the mould at 1834 bar. Immediately afterwards, unit B injects the second material or second colour into the same mould from a 90° angle at 1620 bar. Both materials bond together at a molecular level inside the mould, the cooling phase is completed, and the ejectors push out the finished 2K component. No gluing, screwing, or assembly is required—two materials are combined in a single cycle to form a single part. Applications Interior and exterior automotive trim parts, large technical plastic components, parts with a combination of hard base body and soft grip surface, large-area two-colour components.

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 4.200 h, Viličar LINDE H25D-02 duplo300 FREELIFT/SIDESHIFT, letnik 2014, 4200 ur, DIESEL Video je možno poslati preko WhatsAppa. Neprestana zaloga, glejte spletno stran. Cene so EXW Nuland. Van de Wert Trading B.V. ima spremenljivo zalogo strojev, tovornjakov, prikolic in priključkov. Vse naše dobave so po trgovinskih cenah v stanju AS-IS, brez garancije. (glejte naše splošne pogoje) Hfedpfozqu D Nex Ah Hsl Za ogled in/ali testno vožnjo se lahko dogovorite brez obveznosti. Prosimo, da pokličete vnaprej, saj nismo vedno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland