Brizgalni stroji - večbarvni

Feromatik Milacron Ferromatik K-Tec 110-111H-111V-2F, 2011

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg Djdpsftm Hrefx Ac Noch HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 4.500 h, vpenjalna sila: 50 kN, delovna prostornina: 200 cm³, tlak vbrizgavanja: 2.587 letvica, skupna masa: 2.500 kg, premer polžastega transporterja: 18 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Dcedpfxjwi Uzho Ac Nsh Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.107 h, Funkcionalnost: popolnoma funkcionalen, Top machine from cleanroom production (pharmaceutical industry) - Equipped with 820 mm rotary table - Includes GEKU Robot SR 500 ST (X=600 mm, Y=1400 mm, Z=2500 mm) - Only 33,107 operating hours - Protective enclosure / safety cage - Horizontal conveyor belt - Hardly any paint damage / virtually as-new optical condition - Fully functional The machine can be viewed under power by arrangement. Technical Data Manufacturer: Engel Model: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions (L/W/H): see drawing Dcsdpsub Umqefx Ac Njh Weight: 10,600 kg Functionality: fully functional Condition: excellent Special Features Control: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 ccm Clamping force: 1300 kN / 130 t Tie bar distance: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor capacity: tba Heating capacity: tba Total power: tba The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Protective enclosure / safety cage CC 200 control (German/English) GEKU Robot Details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1400 mm (vertical) Z-axis: 2500 mm (horizontal) A-flip axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not available Warranty Warranty until first startup Loading/Shipping Free loading on buyer's truck or free delivery to destination against freight reimbursement from our stock in Hanover, Germany Financing – On request – Hire purchase option Price on request

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Dcedpfx Aog Ey Ufsc Nsh Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Spoštovani, ponujamo vam priložnost za nakup PLATEG plazemske (ionske) nitrirne naprave s komoro s toplo steno. Oprema je v odličnem stanju, popolnoma funkcionalna, brez napak in pripravljena za takojšnjo uporabo. Tehnične značilnosti opreme: - Dimenzije konstrukcije: 2700 mm x 1250 mm x 800 mm - Dimenzije komore: premer 1000 mm x 1200 mm - Največja velikost serije za nitriranje: premer 900 mm x 900 mm - Skupna moč opreme: 70 kVA - Moč grelcev: 30 kW - Moč plazemskega napajanja (BIAS): 30 kW - Plazemsko napajanje je enopolno, napetost 0–1000 V, tok 0–60 A, DC do 33 kHz, čas vklopa/izklopa impulzov je nastavljiv - Plazemsko napajanje (BIAS) je staro le eno leto, kupljeno v Nemčiji (El Connect) - Vakuumska črpalka: Pffeifer vacuum 65 - Vakuumski sistem je upravljan preko nove elektro omare s PLC in HMI - 4 MFC za doziranje plinov - Proces plazemskega nitriranja in post-oksidacije Dsdpovfm I Hefx Ac Nsch Podjetje Planit nudi tudi montažo opreme, navodila za vzdrževanje, uporabniški priročnik, tehnološki postopek (nitriranje in oksidacija) ter servis. Za dodatne informacije nas kontaktirajte. S prijaznimi pozdravi.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 90.627 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 180 kN, premer vijaka: 18 mm, For sale is an injection moulding machine from Arburg, model 170U 180-70. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2004 Operating hours: 90,627 h Cylinder diameter: 18 mm Clamping force: 180 kN Needle shut-off: Pneumatic Internal pressure sensor Djdpfx Aceu Hqg Te Nsch Transport and loading can be organised Europe-wide upon request and for an additional charge. Prices are subject to VAT. Inspection by appointment possible. Feel free to contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Leto izdelave: 1986, stanje: pripravljen za uporabo (rabljen), Clamping force: 2,700 kN, injection volume: 20,300 cm³, injection pressure: 1,360 bar, total power output: 418 kW. The machine was completely overhauled in 2008, with new pumps installed and all bushings and guides replaced. In 2016, the machine received a new Siemens control system. In 2021, all pumps and valves were recalibrated, and all slide rails were replaced. Dcjdpfopvkzyjx Ac Njh

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle Djdpsg Ey T Eefx Ac Noch - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, obratovalne ure: 86.200 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 11.000 kN, premer vijaka: 150 mm, premer stebra: 230 mm, delovna prostornina: 10.955 cm³, tlak vbrizgavanja: 1.330 letvica, izmetalna sila: 215 N, hod izmetalca: 300 mm, odmični hod: 1.800 mm, širina plošče: 1.400 mm, višina plošče: 1.150 mm, skupna masa: 77.000 kg, ogrevalna zmogljivost: 113 kW (153,64 KM), Oprema: dokumentacija / priročnik, This injection moulding machine, manufactured in 1999, features a robust design with a weight of 53 tonnes and a clamping force of 11,000 kN. It is equipped with a hydraulic clamp, M24 clamping threads, an ENGEL robot for automation, as well as a swivelling mechanism offering great versatility, making it ideal for efficient large-scale production. Please do not hesitate to contact us for further information regarding this ENGEL 1100 T injection moulding press. - The material feed hopper can be given free of charge with the machine. Dodewduliopfx Ac Njch - Engel linear robot + robot cell

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Engel ES 330H80V/125HL .2F Year of manufacture: 2000 Clamping force: 125 tons Dedoigrinopfx Ac Nech Multi-component injection moulding machine Control unit: CC100 Screw (horizontal): 35 mm Screw (vertical): 18 mm 1x hydraulic core pull (BAP) 1x proportional hydraulic rotary table interface (BAP) 16x hot runner zones 2x magnetic clamping plates for BAP and FAP