Famad Paczków Hidravlični Stojni Vitel Dhp nakup rabljenega (4.664)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, STATIONARY HYDRAULIC LIFT DHP - 1.5t The DHP stationary hydraulic lift is designed for stepless lifting and lowering of loads at assembly, loading, and processing stations, with a table size comparable to a EUR pallet. It allows maintaining a constant working level during material loading or unloading. The lift table is raised by two hydraulic cylinders powered by a compact electro-hydraulic power unit, controlled from a pendant control station. The control unit is equipped with "lift", "lower", and "EMERGENCY STOP" buttons. Maximum capacity: 1500 kg Standard table dimensions: 900 x 2000 mm Minimum height (standard): approx. 230 mm Maximum lift height: 1100 mm Lifting time: approx. 30 s Bjdpst Ubn Nofx Aqtell Hydraulic system pressure: max. 16 MPa Noise level: approx. 72 dBA Installed power: 1.1 kW Electrical supply: 3/N/PE, 400V 50Hz Control voltage: 24 V DC Unit weight: approx. 450 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina vrvi: 30.000 mm, hitrost vrvi: 47.000 mm/min, številka stroja/vozila: HAW1700-EV-Funk, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard and horticultural machines, and many other applications. With the hydraulic auxiliary winch, you can make many tasks easier: - Pull and position firewood for the log splitter - Load logs onto trailers - Extract root stumps and trees - Serve as an auxiliary winch for forestry cranes and small excavators - Winch for compact tractors and narrow-track tractors Robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, offering flexible mounting possibilities (threads are cut and painted; for corrosion protection, they should be re-tapped before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for prolonged cable life. We supply hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pull force. Maximum working pressure: 225 bar peak Continuous pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous operating torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Blededf Ufpopfx Aqtjl Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version is equipped with an electric hydraulic valve, radio remote control, and hoses to the motor. Article number: HAW1700-EV-RC

Stanje: novo, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, agricultural tractors, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can greatly facilitate many tasks: - Pulling and positioning firewood to the log splitter - Loading logs onto trailers - Extracting root stocks and trees - As an auxiliary winch for forestry cranes and compact excavators - As a winch for small tractors and narrow-gauge tractors Featuring a robust steel construction with three-sided mounting possibilities (left, right, rear) and 12 threaded holes, offering versatile mounting options for the winch (threads are pre-cut and painted. They should be retapped prior to use for corrosion protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We fit hydraulic motors ranging from 50 to 630 cc (standard = 400 cc), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Blodjdf Ufdopfx Aqtsl Maximum pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow rate Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version comes with an electric hydraulic valve and hoses for the motor. Article number: HAW1700-EV NOTE: Images 2, 3, and 4 are mounting examples!

Stanje: novo, Hydraulic Winch for Log Splitters, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture and many other applications. This hydraulic attachment winch can make a wide range of tasks easier for you. - Pulling and positioning firewood for the log splitter - Pulling logs onto trailers - Extracting rootstocks and trees - Use as an auxiliary winch for forwarding cranes and small excavators - Winch for small tractors and narrow-track tractors Rugged steel construction with triple-sided mounting ability (left, right, rear) using 12 threaded holes, providing numerous installation options (threads are pre-cut and painted. They require re-tapping with a tap before use to remove the corrosion protection coating). Supplied with a 20 m long, 6 mm thick steel cable. Large drum for extended cable service life. We fit hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on your speed and pulling force requirements. Max. working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Max. pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pivot mount: 570 mm Width front: 120 mm Width rear: 180 mm Blodpfx Asdf Ud Sjqtjl Bearing width: +30 mm Motor width: +200 mm Height: 250 mm Winch available for bolting or welding installation. This version is equipped with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Images 2, 3 and 4 are example installation illustrations!

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 0705012, Load capacity 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Bedpeiqhi Tjfx Aqtoll Operating pressure 55 bar up to max. 80 bar Flow rate 19 liters/min up to max. 272 liters/min Hydraulic motor: Rexroth Hydraulic control block with mounting frame Documentation and inspection book available The winch was used on a test bench / test tower. Space requirements (L x W x H): 2,100 x 1,400 x 1,300 mm, complete with control block Weight approx. 1,500 kg

Stanje: novo, Hydraulic Cable Winch HAW4000 without Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the hydraulic attachment winch HAW4000, you can simplify numerous tasks. Maximum cable capacity at 4,000 kg pulling force: 60 m using 10 mm wire rope. Maximum cable capacity at 3,000 kg pulling force: 90 m using 8 mm wire rope. Maximum cable capacity at 1,700 kg pulling force: 150 m using 6 mm wire rope. Maximum cable capacity at 3,500 kg pulling force: 150 m using 6 mm synthetic rope. Maximum cable capacity at 2,000 kg pulling force: 220 m using 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ For viticulture, agriculture, forestry, and horticulture ⦁ For construction, civil engineering, and road construction ⦁ For pulling out stumps and trees ⦁ As an auxiliary winch on skidding cranes and excavators ⦁ As a winch for tractors, agricultural machinery, and grape harvesters A robust steel construction with 3-way mounting options (left, right, rear) using M16 threaded holes, offering multiple possibilities for winch attachment. (Threads are cut and painted. For corrosion protection, they must be recut before use.) Large, greaseable cable roller for a long service life of the wire rope. ⦁ Maximum operating pressure: 210 bar peak ⦁ Oil flow up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4,000 kg ⦁ Cable speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Color: red Blodpfxefn Tvij Aqtol The winch can be mounted in various positions. A hydraulic brake is available as an option. Depending on your required pulling speeds and forces, we can offer different options. Contact us – we are happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with cable inlet: 970 mm ⦁ Width front: 200 mm ⦁ Width rear: 300 mm ⦁ Bearing width: +50 mm ⦁ Motor width: +300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Window lamination glue applicator. Roller width: 250 mm. Equipped with dosing troughs. The applicator also has an adhesive tank with an overhead dispenser. The machine has been refurbished; the application rollers are new. The machine is fitted with an infeed and outfeed conveyor. Fully functional, complete, and overhauled. Blodpst N H R Eofx Aqtsl

Leto izdelave: 2024, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, gradbena višina: 1.850 mm, nosilnost: 2.000 kg, Hydraulic winch Bodpfev N Rzxsx Aqtoll Technical condition: New

Stanje: novo, Hydraulic Winch HAW3000 with Electric Valve and Radio Remote Control for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. The hydraulic attachment winch HAW3000 makes many tasks much easier. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm steel cable. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm steel cable. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Bodpefn Tu Tsfx Aqtsll Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard configuration: 30 m of 8 mm steel cable ⦁ For use in viticulture, agriculture, forestry, and landscaping ⦁ In building construction, civil engineering, and road construction ⦁ For pulling out root stumps and trees ⦁ As an attachment winch for forwarding cranes and excavators ⦁ As a winch for tractors, machinery, and grape harvesters Robust steel design with 3-way mounting options (left, right, rear) using M12 threaded holes. This offers multiple possibilities for attaching the winch. (Threads are cut and painted. For rust protection, threads must be recut before use.) Large lubricatable cable reel for long service life of the steel wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, temporarily up to 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at oil flow of 125 l/min ⦁ Weight: 95 kg ⦁ Colour: red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the required pulling speeds and forces, we can offer you different options. Contact us – we’re happy to advise you.

Stanje: novo, Hydraulic Winch HAW4000 with Electric Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the HAW4000 hydraulic attachment winch, you can significantly ease a wide variety of tasks. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard configuration includes 50 m of 10 mm wire rope. ⦁ Suitable for viticulture, agriculture, forestry, and horticulture ⦁ For building construction, civil engineering, and road construction ⦁ For pulling out rootstocks and trees ⦁ As an attachment winch for timber cranes and excavators ⦁ As a winch for tractors, work machines, and grape harvesters Blodefn Tvkopfx Aqtol Robust steel construction featuring mounting options on three sides (left, right, rear) with M16 threaded holes. This allows for a wide range of installation configurations. (Threads are machined and painted; for corrosion protection, threads must be re-cut before use.) Large, greaseable cable pulley ensures long service life for the wire rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow: up to 200 l/min, temporarily max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Colour: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on your required pulling speed and force, we can offer you different options. Please contact us for expert advice. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope guide: 970 mm ⦁ Width (front): 200 mm ⦁ Width (rear): 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, HYDRAULIC CLAMP FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements The HSKG device is used for edge gluing wooden cut elements under high pressure from hydraulic cylinders. The clamping force per cylinder ranges from 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is performed in a stack within the loading area dimensions. Stack formation is achieved by hydraulic pressing between movable vertical beams and the vertical slats of the cross cylinders. Both elements of the stack forming system are equipped with wooden or metal inserts matching the stack profile of the slats. Edge gluing wooden elements improves frame quality, reduces machining costs, and minimizes wood waste. Blsdpfx Astrl R Asqtel Technical and operational data (standard HSKG model – 6m) Number of loading bays pcs 4 Dimensions of a single loading bay - Loading height mm 1140 - Slat length in each bay mm 1530 Maximum slat width mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of cylinders per bay: - Ø 50x100 – 3 pcs. - Ø 80x100 – 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Machine weight kg 4800 On request, we also manufacture custom control configurations for the pressing cylinders according to the anticipated length of the glued elements, as well as different bay lengths and quantities per press set, and a maximum working width up to 220 mm with increased pressing force.

Stanje: rabljeno, Leto izdelave: 2016, The PDFD line consists of two main components: the DFC 60 tenoning and profiling station (where the ends of the laths are machined) and the PHSL finger-jointing press, which joins elements into laths up to 6.6 m in length, with the ability to program up to eight intermediate cross-cuts, dividing the lath into sections of operator-defined length. Between these main machines, there are transport devices that also serve as a pre-tenoning station. The presented line configuration enables an output of approx. 8,500 – 10,500 linear meters per shift. The machines have undergone a complete overhaul. One-year warranty included. The microprocessor-controlled system allows flexible adjustment of working parameters to suit user requirements. This line is capable of processing both “calzing” type elements and components for manufacturing tabletops (joined along the grain). The use of an outfeed table with automatic feed of laths onto the infeed conveyor of the PHSL press allows the line to be operated by a single worker feeding elements. The outfeed table is equipped with a buffer screen, increasing efficiency and operational smoothness. The line operates in automatic mode with manual material feeding. The line’s components can be arranged in various (customer-agreed) configurations, ensuring the machine fits the user’s available workspace. Technical Specifications: - Infeed width for tenoning machine: 650 mm - Width of glued elements: 30 – 155 mm - Length of glued elements: 170 – 900 mm - Thickness of glued elements: 20 – 70 mm - Operating air pressure: 0.6 MPa - Compressed air demand: approx. 25 m³/h Blodpfxec U Txke Aqtel - Working capacity: up to 4 cycles/min (lath 6,600 mm) - Length of laminated element: 4,500 – 6,600 mm - Operating voltage: 3/N/PE 400 V 50 Hz - Control voltage: 24 V DC - Power requirement: max 100 kW Wooden laths are placed by the operator onto the carriage of the first tenoning machine. Loading the elements initiates the milling cycle. The first machine squares the ends of the batch and profiles the tenon shape. The batch is then transferred to the table of the second tenoning machine, where the other end is machined and glue is applied. Elements from the DFC-60 D tenoner are fed via a chain conveyor to the pre-tenoning assembly, where a set of rollers and a pressure device preliminarily clamp the finger-joint edges before entering the press. Pre-machined elements are then conveyed to the press table, where, after reaching the required length, they are cut. Using a pusher bar and pressure bar, they are moved to the pressing bed area, where the pressing process takes place. The glued and pressed, finished lath is pushed onto the press outfeed table. After moving the elements to the pressing bed, the process of loading new elements onto the press table is carried out in parallel with the described steps, maintaining continuous press operation and thus increasing gluing efficiency.

Leto izdelave: 2024, stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 700 kg, skupna dolžina: 1.200 mm, gradbena višina: 2.408 mm, nosilnost: 7.200 kg, gradbena širina: 1.223 mm, Hydraulic winch ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: New device Technical condition: New Description: 12-month warranty Cable length: 76,000 mm Depth: 638 mm Overall length: 1,200 mm Blodpfewmtzzox Aqtel

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 305 kg, skupna dolžina: 900 mm, gradbena višina: 1.803 mm, nosilnost: 3.000 kg, gradbena širina: 1.080 mm, Hydraulic winch Bljdpswqt Rkefx Aqtel ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: New unit Technical condition: New Description: 12-month warranty

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 420 kg, skupna dolžina: 900 mm, gradbena višina: 1.869 mm, nosilnost: 5.000 kg, gradbena širina: 1.080 mm, Hydraulic Winch ISO Class: ISO Class 4 = 5,000 - 10,000 kg Bljdpfxswqt Rds Aqtol Condition: New unit Technical Condition: New Description: 12 months manufacturer's warranty

Stanje: skoraj kot novo (rabljeno), dolžina žleba 2,7 m širina žleba 440 mm višina 1430 mm Bodpfx Aozxzmteqtjll varnostno stikalo

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: 184, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, skupna masa: 4.400 kg, Ponujamo rabljeno hidravlično stiskalnico FAMAD HSKG 6.6, letnik 2009. Tip: HSKG 6.6 Serijska številka: 184 Leto izdelave: 2009 - 4 nalagalna polja Bsdoy Th E Ujpfx Aqtjll - višina nalaganja 1140 mm - dolžina letev v enem polju 2200 mm - največja širina letev 150 mm - največja dolžina lepljenih elementov 6600 mm Stiskalnica je delujoča, pripravljena za ogled med delovanjem. Cena neto – po dogovoru. (faktura) Masa: ~4400 kg Tip toka: ~ Frekvenca: 50 Hz Obratovalna napetost: 3 x 400 V Krmilna napetost: 24 V Moč: 4,0 kW Nazivni tok: 8,9 A Za dodatna vprašanja ali več informacij nas prosimo kontaktirajte preko sporočila ali telefona.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Linija za spajanje profilov PDFD v enooperacijski različici je sestavljena iz dveh glavnih naprav: stroja za obdelavo in profiliranje DFC 60M (na katerem se obdeluje čelni del profilov) ter stiskalne naprave za spajanje profilov po dolžini PHSL, kjer se posamezni profili združijo v profil dolžine do 6,6 m. Širina vhodnega paketa stroja za obdelavo in profiliranje – 650 mm Širina lepljenih elementov – 30 ÷ 155 mm Dolžina lepljenih elementov – 170 ÷ 900 mm Debelina lepljenih elementov – 20 ÷ 70 mm Bodpfx Ajw Hrm Noqtell Potreba po stisnjenem zraku – 18 m³/h Delovna zmogljivost – ciklov/min – približno 2 (profil dolžine 6600 mm) Dolžina zlepljenega elementa – do 5500 mm Stroj je v odličnem tehničnem stanju!

Stanje: novo, Leto izdelave: 2023, Linija za spajanje drvenih elemenata po dužini, tip PDFE (verzija sa dve glodalice, potpuno automatska) Potpuno nova, došla direktno od proizvođača i nikada nije instalirana. - motori 2 x 22 kW - širina paketa za glodanje 650 mm - dužina elemenata za spajanje 190 – 800 mm - širina elemenata za spajanje 30 – 150 mm - debljina elemenata za spajanje 20 – 60 mm - kontaktni delovi sa lepilom izrađeni od nerđajućeg čelika - opcija za izravnavanje paketa u glodalicama (laser senzor) - pomoćni sto opremljen mehanizmom za okretanje elemenata (četka) - prihvatna ruka za spuštanje elemenata na lančani transporter, upravljana servopogonom - radna dužina prese 4500 mm - do 10 rezova po letvi u presi - lančani transporter PTŁŁ 3500 mm - spajanje na liniju (kresku) i cik-cak Bjdpfxspy Eb Ue Aqtell - centralizovano upravljanje Mitsubishi komponentama

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, skupna dolžina: 1.200 mm, skupna širina: 800 mm, skupna masa: 100 kg, Oprema: dokumentacija / priročnik, Hidravlični ročni brusilnik, hidravlična centralna enota 80 l Motor 4,0 kW, 380 V Regulacija vrtljajev prek regulatorja pretoka, delovni vrtljaji približno 2500 vrt/min. Centralno dovod vode prek gredi Navojna priključna odprtina: M 24 Blsdpfx Aozv Tagjqtol Dolžina hidravličnih cevi: 13,0 m Teža brusilnika: približno 3,8 kg

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.000 mm, gradbena višina: 1.850 mm, nosilnost: 2.000 kg, Hidravlični vitel Blodpfx Aey S Hansqtjl Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: normalno

Stanje: rabljeno, Tehnični podatki: Skupna dolžina lepljenja: 14 metrov Dva neodvisna segmenta z ločenim upravljanjem: 6m/b in 8m/b Bedpfox Id Diex Aqtell Hidravlične stiskalnice s krmiljenjem 12 navpičnih stiskalnic 28 vodoravnih/zadnjih stiskalnic Napajanje: 400 V Skupna moč motorjev: 15 kW Možnost nakupa 6- in 8-metrskega segmenta posebej. Skupne dimenzije: Dolžina: 18000 mm Širina: 1200 mm Višina: 2500 mm

Stanje: rabljeno, Hidravlični motor, prostornina 1800 cm³, Riva Calzoni MR 1800 P, rabljena naprava Proizvajalec: Riva Calzoni S.p.A. (Italija) / Rexroth Calzoni Tip: MR 1800 P Stanje: rabljena, industrijska izvedba Celotne dimenzije: 550 x 550 x 590 mm Tehnični in obratovalni parametri: Prostornina: ~1800 cm³/vrt Največji obratovalni tlak (P. max): 250 bar Največje število vrtljajev (R.P.M. max): 250 vrt/min Bjdpfx Aqszxw Sxotsll Izvedba: radialni batni, visok navor pri nizkih vrtljajih (HTLS) hidravlični motor

Stanje: rabljeno, Leto izdelave: 2002, 2002 Friulmac DUALFEED – avtomatski rezalnik in podajalnik za hidravlično obdelovalno napravo, z elektronsko nastavitvijo mer. Blsdpfx Aqjzxg Ddjtel

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 8.120 mm, skupna višina: 2.300 mm, Vertikalna hidravlična stiskalnica FAMAD HSKG 6m – Število nakladalnih polj: 3 Dimenzije posameznega nakladalnega polja: – Višina nakladanja: 1140mm – Dolžina letvic v enem polju: 1530mm – Največja širina letvic: 150mm – Največja dolžina lepljenih elementov: 3120mm – Vgrajena moč: 3kW – Število cilindrov na polje: - 3 kos 50x100mm - 3 kos 80x100mm – Zunanje dimenzije (d x š x v): 8120x1000x2300mm – Masa naprave: 4800kg Bedpfxeyuylno Aqtsll