FAMAD PDFE 2 Stojala L-4500 mm 2x22kW

FAMAD PDFE

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Nkedpfxew Dp Ufs Abbot Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj - dvigovalno vreteno št. 1 - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Nkedpfxemgc I No Abbot Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm Nksdjt R T Hcopfx Abbot - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: rabljeno, Planing and moulding machine Weinig Hydromat 2000 for four-sided planing and profiling of timber with groove bed, without soundproof enclosure. Number of spindles: 5 Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Njdpfsrmvhfsx Abbskt Spindle 5: Top / 15 kW Working width: 230 mm Working height: 160 mm Spindle diameter: 50 mm

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Nkedpfx Absd Rzc Rjbjt Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system Nksdpfx Aowclkyobbst - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Stravis sawmill line with Jabłoński automatic edger, fully refurbished. Condition: like new. The line includes: Nkodpfev Iyhfsx Abbet 1. Log conveyor for logs up to 5 m with cascade feeder 2. Chain-track carriage 110 + 90 kW 3. Multi-blade saw (2 x 75 kW) spindle diameter 80 mm 4. Roller conveyor, length 6 m, with mechanism for stopping and shifting the left prism 5. Crosscut saw from 0.8 m to 5 m 6. Reference conveyor 7. Roller conveyor, length 3.5 m 8. Driven roller conveyor, length 4.5 m 9. Driven roller conveyor, length 4.0 m, with board unloading system 10. Cross belt conveyor, width 3 m, length 5 m 11. Cross cleated belt conveyor, width 2 m, length 5 m 12. Longitudinal belt conveyor, width 0.4 m, length 5 m 13. Jabłoński automatic edger 14. Jabłoński 'gooseneck' 15. Cross feeder with scanner for measuring board width 16. Centering unit for edger 17 17. Slab separator 18. Crosscut saw from 0.8 m to 3.0 m 19. 'Gooseneck' 20. Jabłoński automatic stacker 21. Non-refurbished Jabłoński crosscut saw 22. Bruks chipper with control unit (requires additional belt/feeder or vibratory trough) Installation and commissioning at the customer's site available. Videos of the machine in operation prior to refurbishment can be provided. The line can be configured in loop or linear layout. Base frame construction for the line available as an option. OPPORTUNITY!

Stanje: dober (rabljeno), Sorting Trolley / Sorting Crane Baljer & Zembrod Crane ASX1 Track gauge (inner): 2.5 meters with crosscut saw (has not been used for an extended period) with log deck with rails Njdpfxsv I A Ihj Abbjkt with cable (1 year old) Available immediately Location: Austria, near Villach

Stanje: zelo dobro (rabljeno), Storti RM 500 Edger - Made in Italy - Year of manufacture: 1993 - Electrically adjustable sawblade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum width of workpiece: 600 mm Nksdpfx Absk Talpsbot - Minimum workpiece length: 800 mm - Maximum blade diameter: 600 mm - Arbor diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Roller drive motor power: 2 x 1.1 kW - Rollers with automatic pressure engagement - Seven lower toothed feed rollers - Electric adjustment of sawblades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers diameter: 100 mm - Feed roller motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3,500 kg

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED - Infeed wood length: 150 - 700 mm - Wood width: 40 - 150 mm - Wood thickness: 18 - 80 mm Nkodjwry I Eopfx Abbet - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scorer: 5.5 kW - Year: 2004 CE