Hidravlični kabelski vitel z el. ventil

Holzhäuer HAW4000-EV

Stanje: novo, Hydraulic Cable Winch HAW4000 without Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the hydraulic attachment winch HAW4000, you can simplify numerous tasks. Maximum cable capacity at 4,000 kg pulling force: 60 m using 10 mm wire rope. Maximum cable capacity at 3,000 kg pulling force: 90 m using 8 mm wire rope. Maximum cable capacity at 1,700 kg pulling force: 150 m using 6 mm wire rope. Maximum cable capacity at 3,500 kg pulling force: 150 m using 6 mm synthetic rope. Maximum cable capacity at 2,000 kg pulling force: 220 m using 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ For viticulture, agriculture, forestry, and horticulture ⦁ For construction, civil engineering, and road construction ⦁ For pulling out stumps and trees ⦁ As an auxiliary winch on skidding cranes and excavators Iodpfx Afsfn Tvij Teal ⦁ As a winch for tractors, agricultural machinery, and grape harvesters A robust steel construction with 3-way mounting options (left, right, rear) using M16 threaded holes, offering multiple possibilities for winch attachment. (Threads are cut and painted. For corrosion protection, they must be recut before use.) Large, greaseable cable roller for a long service life of the wire rope. ⦁ Maximum operating pressure: 210 bar peak ⦁ Oil flow up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4,000 kg ⦁ Cable speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Color: red The winch can be mounted in various positions. A hydraulic brake is available as an option. Depending on your required pulling speeds and forces, we can offer different options. Contact us – we are happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with cable inlet: 970 mm ⦁ Width front: 200 mm ⦁ Width rear: 300 mm ⦁ Bearing width: +50 mm ⦁ Motor width: +300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina vrvi: 30.000 mm, hitrost vrvi: 47.000 mm/min, številka stroja/vozila: HAW1700-EV-Funk, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard and horticultural machines, and many other applications. With the hydraulic auxiliary winch, you can make many tasks easier: - Pull and position firewood for the log splitter - Load logs onto trailers - Extract root stumps and trees Iaodedf Ufpepfx Af Tol - Serve as an auxiliary winch for forestry cranes and small excavators - Winch for compact tractors and narrow-track tractors Robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, offering flexible mounting possibilities (threads are cut and painted; for corrosion protection, they should be re-tapped before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for prolonged cable life. We supply hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pull force. Maximum working pressure: 225 bar peak Continuous pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous operating torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version is equipped with an electric hydraulic valve, radio remote control, and hoses to the motor. Article number: HAW1700-EV-RC

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 620 h, Little-used and well-maintained Komatsu PC 20 R-5 Mini Excavator Technical specifications: * Operating weight incl. equipment approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length 3,845 mm * Overall height 2,370 mm * Overall width (minimum) 1,280 mm (990 mm) * Track width 230 mm * Tail swing radius 1,120 mm * Total track length 1,570 mm * Max. digging reach 4,100 mm * Max. digging depth 2,370 mm * Minimum swing radius 1,515 mm Features included: * 2 travel speeds with auto-shift-down * Servo control * Long dipper stick * Auxiliary hydraulic circuit (2-way) to boom (switchable to breaker mode) * Protective cover on boom lift cylinder Iedperwvvyjfx Af Tsal * Work light on the boom * Dozer blade * Acoustic travel alarm * Tool kit * CE conformity * Cab with heating * 1x standard hydraulic line (with pedal) * Suspension seat with 2-point seat belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other information: * Attachments NOT included – sale on request

Stanje: dober (rabljeno), Well-maintained horizontal frame saw. Passage width: 1000 mm. Stroke: 800 mm. Feed rate electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamps. Iaodpfx Aeunhl Usf Tsl Can still be inspected in operation.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.240 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 135 l, barva: bela, Izhodni tok: 130 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 34 kW (46,23 KM), neprekinjena moč: 30 kW (40,79 KM), skupna dolžina: 2.200 mm, skupna širina: 950 mm, skupna višina: 1.230 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Deutz, Cummins, Ricardo, vrsta hlajenja: voda, vrsta vhodnega toka: trifazni, Three-phase stationary generator set Proton ZPP 30R (30kW - 34kW) in a compact, weather-resistant, and additionally soundproofed enclosure. The generator is equipped with an external Automatic Transfer Switch (ATS / Autostart) system and many other features listed later in the description. • Model – Proton ZPP 30R ATS • Maximum power – 34,000 Watt (34kW / 40 kVA) • Rated power – 30,000 Watt (30kW / 36 kVA) • Ready to operate – Yes • Type – Industrial generator set • Generator condition – Brand new • Manufacturer – Proton • Generator type – Three-phase • VAT invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo MN4100ZDS Fuel type – Diesel Fuel consumption: - 6.5 liters per hour (at 75% maximum load) - 5.0 liters per hour (at 50% maximum load) Engine configuration – Inline (R4) Displacement – 4100 cc Direct injection Lubrication system – Forced, engine with oil pump ⊳ ALTERNATOR: 100% copper winding AVR voltage stabilizer – Yes Alternator model – Proton 184H Rated output 400V – 30,000 Watt (30kW / 36 kVA) Maximum output 400V (up to 15 minutes) – 34,000 Watt (34kW / 40 kVA) Rated current (400V) – 140.0 A Current protection – C16, C32, main – 100A Frequency – 50 Hz Alternator construction – Synchronous ⊳ ENCLOSURE: Soundproofed housing Weather-resistant housing Three-phase and single-phase sockets Fuel tank capacity – 135 liters Average runtime on full tank – 20 hours Transport set – Forklift slots and HDS transport hooks Dimensions: 220 x 95 x 123 cm Gross weight – 1240 kg ⊳ FEATURES: AVR voltage stabilizer – Stamford SX460 (2%) - electronic voltage stabilization under variable load - electronic frequency stabilization Automatic generator set operation (ATS – Automatic Transfer Switch) Overload and thermal protection Oil pressure sensor, oil level sensor, coolant level sensor Glow plugs Oil pan heater Iasdpstpvdtsfx Af Tsl Coolant heater Battery – 2 x 40Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Engine hour meter Ammeter Voltmeter Built-in PLC logic and editor Overload protection CAN module extensions Integration with SCADA systems Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and GPRS monitoring – Optional Modbus, Ethernet communication – Optional Why us? We are a company specializing exclusively in generator sets, with over 17 years of experience in the industry, constantly striving to ensure our products represent the highest quality and reliability. Throughout this time, we have delivered solutions to over 10,000 customers across Poland, including its most remote regions. We meticulously select the suppliers of our generator components, making sure they are leaders in their respective fields. We offer a wide range of generators from 6 to 300kW with various engines, including English Ricardo, American Cummins, and German Deutz, as well as custom configurations tailored to individual customer requirements.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Na voljo je mesoreznica K+G Wetter WW-130, letnik 1999. Mesni polž na novo ležajen, 2-stopenjski. Motorna moč 14 x 18,5 kW, 380V. Lijak ca. 280L. Glej slike. 5-delni rezalni sistem, nove plošče. Z integriranim podajalnikom za 200L standardne vozičke. Dodatne informacije na zahtevo. Plačilo z gotovino ali predplačilo. Iedpfx Aoxfvr Ref Tsal Prodaja samo pravnim osebam, brez garancije in jamstva.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Iajdpfx Aeifnzdsf Tjl Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, največja širina rezanja: 1.225 mm, Oprema: kabina, STATIONARY SAW WITH CABIN (optional enclosure) Technical Specifications: - Main motor: 55 kW with frequency inverter - Maximum cutting width: 600 mm - Maximum workpiece height: 1000 mm - Main wheel diameter: 1200 mm (model WRAVOR WRC 1225 AC) - Main wheels: cast, 125 mm width - 11 kW electric motor for saw blade up/down movement - Floor-mounted main columns – structure enabling the saw head to move vertically via special sliding plastic Iaodevr Tdhepfx Af Tjl - 1 hydraulic unit, 16 L, with 4 kW pump - Automatic hydraulic blade tensioning - Hiwin linear movable blade guide (right) and fixed blade guide (left) - Additional valve for roller - Blade guide pressure system - 2 magnetic sensors for blade deviation alert - 1 piece PV 40 saw blade – 8685 mm x 1.2 mm x 150 mm - Sawdust outlet opening diameter – outlet port / 200 mm - Electrical cabinet on the machine for connecting all electric cables to the saw - Mini control panel for basic saw functions - Centralized electric spindle/worm lubrication - Centralized oil lubrication system - x Cameras - SCHNEIDER control system & WRAVOR software: PLC with 1 joystick

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Iedpfx Ajidqphjf Toal Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: rabljeno, prevoženi kilometri: 143.755 km, moč: 105 kW (142,76 KM), prva registracija: 10/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: siv, emisijski razred: Euro 6, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 1.900 mm, Oprema: ABS, filter saj, klimatska naprava, Used vehicle Ijdpfsw E Uy Nex Af Tjal Euro 6 green emissions sticker, Sprinter 314 CDI new model, medium wheelbase panel van with high roof, automatic climate control, 6-speed gearbox, reversing camera, rear parking sensors, cruise control, multifunction steering wheel, 2 seats, cargo area lining (floor and walls), 270° rear doors, electric windows, electric mirrors, central locking, airbag, ABS, ASR, German vehicle, 2nd owner, original mileage, !!! optional with shelf system in the cargo area at extra cost !!! - Subject to prior sale and errors - Sale only to tradespeople or for export - Vehicle No.: 70