Ernitec Video Oddajnik nakup rabljenega (3.437)

Stanje: rabljeno, Surveillance camera, video surveillance, receiver, transmitter, video sender, signal amplifier - Manufacturer: Ernitec, transmitter type BVT-65 Ovp - Voltage: 230VAC / 50-60 Hz - Quantity: 3 transmitters available - Price: per unit - Packaging dimensions: 180/130/H60 mm - Weight: 0.5 kg/unit Nodpfx Aoitapqeh Uswg

Stanje: rabljeno,

Stanje: novo, Glazing Bead Nailer “2 P Jumbo automatic E.C.” – new – Your Benefits: - Corner joints are fully closed - No open glazing bead joints - No color mismatches when painting - Glazing bead frames easy to allocate Corner Stapling Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; Equipped with angle stop, top and front clamping device. Pressure can be adjusted separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table, Nwjdovnh T Nspfx Ah Uog Operated via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping costs ----- Images show the 2P Corner Stapling Machine with the optional mobile work table (see surcharge details below) Surcharges: ----- Mobile Work Table: Height adjustable from 700 - 1000 mm, 2 removable support rails, 1000 mm long, 2 pivoting and sliding support rails, 1000 mm, support rails covered with felt, 4 swivel castors, 2 with locking device. ----- Surcharge: 1,311.00 EUR net Staples: Packages 15 mm staples (pack of 2000): Price 22.00 EUR 12 mm staples (pack of 3000): Price 32.00 EUR 10 mm staples (pack of 3000): Price 32.00 EUR Dimensions and Weights ----- Jumbo Automatic E.C: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices are net, plus VAT. Ex-works, plus packaging and shipping. (Technical data as per manufacturer – without obligation!)

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 7.847 h, Power output: 440 kW (598 HP) Contact Emal Jaweed for further information. Crawler tractor, Challenger MT875E, year of manufacture 2016, operating hours: 7,847 h, length: 6,400 mm, width: 2,500 mm, height: 3,500 mm, weight: 23,200 kg, track width: 910 mm, engine: AGCO Power, engine output: 440 kW, enclosed cab, air conditioning, number of cylinders: 12, Air Ride seat, Trimble Precision IQ display, Trimble AG-25 antenna, AdBlue, front rim weights, side frame weights, rear remote controls, additional hydraulics, ISOBUS, compressed air braking system, front idler weights, crawler chassis, GPS control, torque: 2,840 Nm, video available, very good condition! Ready to use... Miscellaneous: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/M Airport. * Financing and leasing available. * Specialist for worldwide transport and shipping. * No liability for misprints and typographical errors. * Subject to errors and prior sale. * Trade-in possible! Nodpsy Ullhofx Ah Uowg * Only the general terms and conditions (AGB) of Jaweed GmbH apply for vehicle purchase/used machinery sale. * For more information and our terms and conditions, please visit our website. We are selling our goods with general terms and conditions (listed: ... / AGB) - .

Stanje: dober (rabljeno), Leto izdelave: 2010, Technical Data Manufacturer: Werth Messtechnik GmbH Model: Video-Check 800x400x200 3D Year of Manufacture: 2010 Measuring Range: 800x400x200 mm Control: Operator console with joystick and function buttons Voltage: 230 V AC Frequency: 50 Hz Current Consumption: max. 10 A Camera: High-resolution video technology Probes: Renishaw measuring probes Multisensor System: Combines optical and tactile measurement Construction: Solid granite base SCOPE OF SUPPLY Included (not exhaustive): - 3D measuring machine Werth Video-Check 800x400x200 - Operator console with joystick and function buttons - Probes Exact scope of delivery as per photo documentation The Werth Video-Check 800x400x200 is a high-precision 3D measuring machine designed for versatile applications in quality assurance. With its generous measuring range of 800x400x200 mm, it is suitable for small to medium-sized components. The machine is equipped with a multisensor system that allows both optical and tactile measurements, providing maximum flexibility. The robust granite construction ensures highest measurement accuracy and long-term stability. Thanks to the Renishaw probe, video camera, and user-friendly operation via the control console, complex measuring tasks can be performed efficiently and reliably. No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided. Njdpfjxfly Dox Ah Uowg

Stanje: dober (rabljeno), Leto izdelave: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D coordinate measuring machine Year of manufacture: 2010 Nwjdpfxexfluue Ah Usg Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision linear ball guides on all axes Illumination: Transmitted light, bright field and dark field incident light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black and white camera Electrical connection: 230 V AC, 50 Hz Power consumption: max. 10 A Power rating: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Includes (not a complete list): - 3D coordinate measuring machine Werth Video-Check-IP 400×200 3D CNC - Control panel - Probes - Fiber optics and calibration standard sets Exact scope of delivery as per photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile measurement technology. With a measuring range of 400 x 200 x 250 mm, it offers flexible application possibilities for quality assurance of various components. The combination of a high-resolution CCD monochrome camera, powerful zoom optics, and LED illumination ensures precise imaging and reliable results. Precision ball guides and servo drives guarantee high repeatability. The machine is equipped with comprehensive accessories and is ideal for precise 3D measurement tasks in industrial and manufacturing environments. No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Stanje: novo, Number of sanding units: 8 pcs Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L/W/H): 3065 x 1600 x 1900 mm Machine weight: approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, defibering, and edge rounding) or intermediate sanding of profiled window bars. Featuring Softdisc technology for visible surfaces and automatic profile and width adjustment. - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - 1 upper Softdisc unit Ø=200 mm, 0.75 kW - 1 upper lamella roller unit L=200 mm, 0.75 kW - 1 lower Softdisc unit Ø=200 mm, 0.75 kW - 1 lower lamella roller unit L=200 mm, 0.75 kW - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units on linear ball bearing sets with hardened shafts - Timed immersion of all lamella roller units directly above the incoming workpiece edges. Immersion allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable lamella roller speed via frequency inverter to adjust sanding intensity (separately for discs, surface rollers, and side rollers) Njdpjvnv Uhefx Ah Uewg - Disc units as Softdisc with hook-and-loop backing for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belt and spring-loaded pressure rollers, continuously variable speed 4-15 m/min - Parameters adjustable via touch panel: workpiece thickness, workpiece width (left lateral units individually), immersion depth of lateral units, spindle speed, feed rate - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width and profile recognition, as well as automatic positioning of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically indexed powered feed roller, automatic clamping of workpiece, feed after unit adjustment - Red/green signal lights indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with return processing) - Workpiece height: 12-160 mm - Extraction connection: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blow-off directly at the discs - Length (housing) x width x height (mm): 3065 x 1600 x 1900 - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400 V, 50 Hz, 3-phase, air supply: 6 bar - CE-compliant version ----- Price of the above-mentioned machine on request! ----- Special accessories at extra charge: Set of replacement lamella strips for Leistomat SD-200, comprising: Surface units: - 30 strips EH45 / 200 - 7 (rollers) - 30 strips EH45 / 200 - 20 (rollers) Rebate units: - 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid, with 30 slots, 50 mm long Set of replacement lamella strips for SmartFlex lamella disc, comprising: - 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc - D=200 mm, grit 220, with velour backing (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc - D=200 mm, grit 280, with velour backing (hook-and-loop), pack of 100 pcs. ----- ...

Stanje: novo, Leto izdelave: 2026, Number of motors: 2 units Working length: 3000 mm Control: yes / CNC Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm For wooden glazing bars, muntin bars, profile strips, aluminium strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (internal) to 135° (external) - Right head movable - Saw blade mount: Ø 350 mm - Including 1 pc. center support. - Pneumatic clamping of aggregates. - Position control Exenso DS3 with touch panel 15” display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swivel axes. - Manual entry of cutting data - Processing of data from a cutting list (data set as specified) - Processing of measuring tape data (wireless caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - Including control cabinet, motor, and software licenses. Item 1.2 Article number 942.5203 DS feed unit, hydropneumatic Item 1.3 Article number 723.0121 2 pcs. DS saw blade wood Bevel / bevel / flat tooth – positive Item 1.4 Article number 942.5236 2 sets of DS workpiece clamping, combined Combined workpiece clamping consisting of: Pneumatic swivel clamp for clamping the material from above. (Free access to the work table) Horizontal pneumatic clamp – anti-twist clamping cylinder with pressure pad. Clamps can be individually selected via saw’s control system. Clamping sequence can also be set through the control system. Including safety pre-clamping pressure Scope of delivery for 2 sets: - 2 pcs. (left/right) vertical swivel clamps - 2 pcs. (left/right) horizontal clamps Nedpfx Aeyy A Ikjh Uowg Item 1.5 Article number 942.5241 DS350 table support, slotted (standard slot; special slots per customer specification upon request) Item 3.1 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price for this configuration ex works – on request! ALTERNATIVE OPTIONS, prices on request! ----- For horizontal clamping of remnants when cutting square-cut glazing bars instead of 2nd set Item 1.3 943.5236 DS combined workpiece clamping! Item 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-twist clamping cylinders - 2 pcs. cylinder holders with clamping lever ----- OPTIONAL accessories, at additional cost upon request: ----- Item 4.3 Article number 942.5237 DS software “Overlength” (subsequent steps must be confirmed) Process control incl. hardware. After input of a cutting length > max. cutting length of the unit, the cutting will be cycle-controlled. (Left unit cuts, right unit moves the material and cuts to size.) Item 2.1 Article number 944.1023 GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension) incl. charger and receiver. A robust aluminium measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing bars. Functionality: For use on doors and large window sashes, the GMF caliper can be safely and quickly mechanically extended up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic...

Stanje: novo, Leto izdelave: 2026, Working width 4500 mm Working height 3000 mm Number of pressing cylinders 6 pcs. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S Frame Press Bavaria 2000 L, Year 2026 ----- AVAILABLE AT SHORT NOTICE from stock Engelfried, 73447 Oberkochen! INNOVATION for Holz-Handwerk 2026 in Nuremberg: Now also with semi-automatic positioning of the vertical pressing cylinders 1, 2 and 3 via enabling button, incl. selector switch ON/OFF for beam 2 With automatic pressing cycle + manual control for corner joints (tenon & mortise and dowel joint/mortised tenon), switchable via selector switch on the control cabinet. Comes standard ready for optional use of counter profiles if sashes are folded on the loose part. CE version Base machine in heavy-duty welded frame construction with thick-walled special hollow profiles. Guide rails for pressing beams at the press corners in wear-resistant, machined design. Fast, smooth, manual width adjustment via ball-bearing mounted carriage; fixable in 50 mm grid, optionally motorized width adjustment with hydraulic clamping (at extra charge). Height adjustment and pressing by long-stroke cylinders in one operating cycle. Right press corners with integrated horizontal cylinders, thus no vertical positioning of horizontal pressing cylinders necessary, preventing cylinder collisions. Lower abutment adjustable to optimal insertion height in several positions. 3 kW compact hydraulic unit with integrated control block, variable pressure regulation 20-120 bar, pressure gauge. Control via pushbutton with separate circuits for vertical and horizontal pressing cylinders, mounted on mobile operating desk. 2 vertical double-acting pressing cylinders, stroke adjusted to working height, piston diameter 60 mm, max. pressure per cylinder 2100 kg 2 horizontal double-acting pressing cylinders, 80 mm stroke, piston diameter 40 mm, max. pressure per cylinder 1250 kg Abutment and pressure plate depth 100 mm Control cabinet at the left foot of the machine, 400 V, 50 Hz Machine supplied with ready-to-connect 16 A plug Paintwork: RAL 7035 light grey with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm Note: actual working size 4,500 x 3,000 mm (L x H) Required space: 5,600 mm x 1,400 mm x 3,550 mm (L x W x H) Article: Medium pressure beam complete with pressing cylinder, pressure hose and shut-off valve up to 2,750 mm height Note: actual working height: 3,000 mm Article: Single-pressure regulation for medium pressure beam, adjustable up to max. 100 bar (for pressing cross-bar windows) Article: Continuously height-adjustable cross-pressure device, complete with pressing cylinder and abutment, throttle and shut-off valve Nwsdjyyqnfepfx Ah Usg Article: Single-pressure regulation for cross-pressure device, adjustable up to max. 100 bar (for pressing cross-bar windows) Article: Shut-off valve at the 3rd vertical cylinder Article: Shut-off valve at the upper horizontal cylinder Article: Shut-off valve at the lower horizontal cylinder

Stanje: novo, Leto izdelave: 2026, max. workpiece length 4400 mm milling spindle: 1 unit main motor: 19.2 kW control: Beckhoff CNC machining centre MASTERWOOD 4 WIN Nwodpeyyqm Uofx Ah Ueg ---- Specially designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimum tool configuration - Simultaneous loading with 4 workpieces - Patented clamping system for optimal workpiece machining - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for switching between exterior and interior profiling - INTEGRATED window construction software, i.e. the machine does not need to (but can, of course) be controlled externally from the office by sector-specific software - Powerful 19.2 kW main motor with HSK-63 E Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Tooling available for prompt delivery upon request! Request a quotation and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! You will also find the technical description of the machine as a PDF document attached. We would be happy to take your used machine in trade at a fair price! Matching stationary or mobile extraction units available on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (Technical specifications as per manufacturer – subject to change!)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naprodaj je digitalni video inšpekcijski sistem znamke Vision v dobrem, rabljenem stanju, kot je razvidno na slikah. Tehnični podatki: • Proizvajalec: Vision Engineering • Model: EVO Cam II • Z večosnim stebričnim stojalom in kotno optiko • S 360° kotno optiko (kot nastavek na objektivu) za krožni pregled navpičnih predmetov • Optični zoom: 30x • Digitalni zoom: 12x • Z zaslonom • Stanje: rabljeno, delujoče Stroški pošiljanja s špedicijo: približno 100 € Mednarodni kupci so dobrodošli! Prejmete račun z navedeno DDV. Pregled / prevzem je možen po dogovoru v 42855 Remscheid. Nedpfx Ahoy N Ak Dj Uowg Prodaja iz lokacije 42855 Remscheid, naloženo po dogovoru. Možne napake v tehničnih podatkih in predhodna prodaja pridržana.

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Nwsdpfx Ahsd Rzc Rj Uog Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: novo, Maks. dolžina obdelovanca 4500, 6000 mm 3 rezkalne vretena Glavni motor 24 kW Krmiljenje Siemens 840d Working Process Logos Life Evo XS 2345 ----- Nwsdpfx Ajyrtyyoh Usg Popolnoma avtomatska CNC naprava za izdelavo oken z avtomatskim nalaganjem in razlaganjem. 2 portala s 3 rezkalnimi vreteni s 4- in 5-osno tehnologijo CNC-krmiljen manipulator za postavitev obdelovanca z 16 dvojnimi kleščami 8 popolnoma neodvisnih vpenjalnih naprav za največjo prilagodljivost in produktivnost 128 mest za orodje NOVO: Working Process zdaj proizvaja tudi enovretenske naprave z uveljavljeno tehnologijo za manjša podjetja! Ob strani najdete aktualne videoposnetke te serije.

Stanje: novo, Assembly line consisting of: Pos. 1.0 / RU-CBM 4000 Work Table with a 500mm extended guide rail for the additional installation of an aluminum bracket screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table. Length 4000 mm, width 1400 mm, tilt angle of the working platform manually adjustable. Mounting bracket for fitting shears or fitting punch. 16 pivoting counter-holders for suspending sashes, fully pneumatically foldable for unrestricted movement of the sashes on the table surface. Device for detecting sash hardware length for constant and variable/central gear placement for already drilled sashes, visual size recognition of the fittings. RU-SH, special screwdriver with pneumatic depth stop mounted on carriage, safety control system, pneumatic height adjustment, screw feeder device with automatic container shut-off (manual feed for a second screw length at the special screwdriver upon request). RA-8, turret stop for 8 screwing levels mounted on the carriage. RA-4, turret stop for 4 different sash widths mounted on the pivoting table. Sash measurement detection pneumatically operated, detection range up to 2500mm with simultaneous clamping of the measuring system. PSF – Pneumatic clamping device for sashes. Working height adjustable from 900 – 1000 mm. Support table covered with felt. Guide rail extended to the left by 800 mm. Pos. 1.1 / 5035-1 Pneumatic swing mechanism for the work surface with foot valve Pos. 1.2 / 0500000 Bracket adapted for customer-provided punch/shears. For mounting a customer-supplied fitting punch or fitting shears (third-party make) on the sash assembly table. Please specify manufacturer when ordering!!! Pos. 1.3 / 5597-7 Travel device for RU-CBM on semi-circular guide rails. The running rollers are mounted left and right on the base frame of the table. Pos. 1.4 / 6354-6 3 double-meter semi-circular guide rails, 30 x 10 mm. Pos. 1.5 / 0730000 RU-SBL3000/40 hardware storage, free-standing, Length 3100 mm, depth 1250 mm, height 2200 mm, Support frame without front supports, 40 compartments, separated by dividing walls into 10 pieces per row, and one continuous shelf above, Compartment size: width 280 mm, height 150 mm. Pos. 2 RU-CSA-SMB aluminum bracket screwdriving machine with automatic screw feeding and manual feeding of the aluminum brackets from a mobile box with pneumatic positioning system, Screwdriver with depth stop with 4-position turret stop. Pneumatic adjustment in the y-direction against two 6-position turret stops. Feeder box for manual feeding of rotational or clip brackets in square form 18.5 x 18.5 mm. The bracket is manually pushed into a channel in the box and positioned in front of the screwdriver tip by a pneumatically actuated slide. Profile depth max. 150 mm, screw spacing in y-direction max. 120 mm. Pos. 3 RU-S48-A6-350 column jib crane for chain hoist, with 6 m aluminum jib arm Version with base column, low-friction jib arm Nwedpod Ih Huefx Ah Uog and manual push trolley for slewing and trolley travel by pulling and pushing on the load. Jib reach 6 m Structural height 4.461 m Lower edge of jib arm 3.722 m (upper edge of jib arm 3.9 m) Slewing range max. 270° Steelwork painted in RAL 7035 The base plate is mounted to the hall floor supplied by the customer with ...

Stanje: dober (rabljeno), Leto izdelave: 2020, In this offer, you are purchasing a used collaboration board "Cisco Webex Board 85S" Scope of delivery: 1 x Cisco Webex Board 85S: - Approx. 21 boards in stock - Also available in 70" and 55" sizes - Supplied without stand/wall mount - Sample images shown The Webex® Board is an all-in-one device that provides everything you need for team collaboration in physical meeting rooms. You can present wirelessly, use whiteboards, and make video and audio calls. It connects securely to your virtual teams via the Webex service or your Webex app-enabled devices so you can access your meetings and content on the go. Nsdpfx Ahjqydw Ij Ujwg Condition: This offer is for a used device, which may show signs of use (minor scratches or discolorations). The device has been function-tested. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to shipping or collection. For further information, please feel free to contact us directly.

Stanje: novo, Maximum workpiece length: 5150 mm Milling spindle: 1 unit Main motor: 16 kW Control system: Beckhoff CNC Nsded Ih Htepfx Ah Ujwg Number of axes: 5 units CNC machining center Masterwood Project 385 WL, BRAND NEW MACHINE The all-rounder for: - Windows, curved and arched windows, and doors - Interior fittings - Curtain wall (post-and-beam) systems - 5-axis machining of all kinds Detailed description available in the attached PDF file. HIGHLIGHTS: - Working area: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 high-performance 5-axis spindle, 16 kW, double bearing support, with HSK 63 F interface - Fixed drilling head with 19 spindles: * 7 individually selectable vertical drilling spindles, X-direction * 6 individually selectable vertical drilling spindles, Y-direction * 2 double horizontal drilling spindles, X-direction * 1 double horizontal drilling spindle, Y-direction * Saw unit integrated in the drilling head - Carousel tool changer with 22 positions, 102 mm pitch - Carousel tool changer with 16 positions, 102 mm pitch - Linear 4-position tool magazine - Special clamps for straight window and door parts - Special clamps for round window and door elements - 24 vacuum clamps for interior finishing - Vacuum pump - Chip conveyor - Comprehensive construction software for interior finishing, panel processing, and window & door production: * Masterwork: 2D WOP for standard panel processing/interior finishing applications, with additional Lamello joint feature * Master 3D, Level 2: for more complex operations, optionally expandable for fully interpolating 5-axis operation * MasterWindow: Integrated window and door design software (machine can be used with or without external industry software) VIDEO demonstrates production of 4 sash components in a single setup, with complete machining including glazing bead production. Hybrid corner joint. Of course, all common corner joints can be produced on the machine. ADDITIONAL OPTIONS AVAILABLE ON REQUEST! We are also happy to offer suitable tooling for the machine. (Data according to manufacturer - subject to change and without liability!)

Stanje: novo, Staple length, mm Staple width (Rieker width), mm Impact energy, Nm Nodpfx Asxpi Efeh Uowg Painting support for simultaneous painting of sash and glazing bead frame RU-LH Painting Aid for Glazing Bead Frames For processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. One staple is placed at each of the 4 corners of the glazing bead frame. Positioning is done diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping action is created. During painting, the glazing bead frame is placed approx. 20 mm in front of the sash. After drying or before sash assembly, the glazing bead frame is pressed flush into the sash and then removed again before glazing. The staples can then be pulled out by hand. Stand frame with support table, vertical at 85°, tiltable. 2 compensation frames for different glazing bead thicknesses, operated via foot pedal. Price on request plus packaging and shipping Optional at a surcharge: Pack of staples 26 x 50 mm, 4,300 pieces each EUR 77.00 Images of the painting aid can be found at the end of the adjacent video! (Technical specifications according to manufacturer – subject to change without notice!)

Leto izdelave: 2021, obratovalne ure: 60 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X620DM-WL, We are selling a high-quality industrial videoscope. As plant engineers, we used this device to inspect weld seams inside pipelines. It delivers excellent image quality and is very easy to operate. Unfortunately, the probe length of 2 metres is no longer sufficient for our applications, so we need to sell it and purchase a model with a longer probe. The unit is only 3 years old. Original order confirmation details: Portable video endoscope, VTec X series - Forward or side view, white light - State-of-the-art CMOS camera technology - Bright, high-resolution 5.5" handset display Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Nwedpfeu Ul A Nsx Ah Ueg Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light, front LED, 3.22 lm; white light, side LED, 6.45 lm Camera resolution: Front 1280 x 960 px; Side 1280 x 960 px Monitor resolution: 1920 x 1080 px Articulation: ≤ 150° ±10 Articulation control: 4-way motorised joystick Power supply: Four 18650 Li-Ion batteries with protection circuit or mains adapter Operating conditions, protection class, weight: Hand unit: -10°C to +50°C, IP54, 1.50 kg Probe: -20°C to +70°C, IP67 Scope of delivery: - VTec X620DM-WL video endoscope - SD-USB memory card reader - HDMI cable - Mini USB data cable incl. USB power adapter - Battery charger incl. power adapter - Power adapter - Four 18650 Li-Ion batteries with protection circuit - User manual - Carrying case Rigid over-sheath with hand grip for 6 mm videoscopes Working length of sheath: 350 mm Including 1/4" tripod thread mount

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Nwjdpfxjvu Hgbs Ah Ujg Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: novo, Bore diameter variable, mm Number of horizontal boring heads: 1 pc. Number of vertical boring heads: 0 pcs. 1 Götzinger Dowel Gluing and Insertion Machine BLE The BLE is used to apply glue and insert dowels into the end faces of workpieces. Optionally, the BLE can be upgraded with a drilling unit, counter milling unit, and longitudinal stop. A 10" touch panel enables easy operation in manual or online mode. Basic Frame: compact design, covered with sheet metal Table size approx. 800 x 200 mm Pos. 1 ----- 1 Glue station Full-jet valve Precisely adjustable glue quantity Glue gun for opposing hole application Pos. 2 ----- 1 Stainless steel glue pump, high-pressure pump and glue hose Pos. 3 ----- 1 Insertion station with dowel singling device and insertion cylinder Pos. 4 ----- 1 Vibratory feeder for dowels d 8 x 50 mm with feed hose to the insertion unit Pos. 5 ----- 1 Processing unit with cross table, linear guide, and 3 NC-axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm insertion depth Pos. 6 ----- 1 Positioning control 10" color touch panel Up to 500 drilling patterns can be created and stored, which can be easily recalled as needed (1 drilling pattern can have up to 16 dowel positions) Nodpfx Asu Uu Uzsh Ujwg Software prepared for ONLINE connectivity For online control, the data must be prepared in the appropriate software format for the controller – our machine can receive and process these data. ----- Total price for version with Pos. 1 to Pos. 6: on request! Optional equipment and surcharges: ----- Pos. 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed 4,000 – 8,000 rpm, collet chuck mounting Drill feed: pneumatic Surcharge: EUR 4,305.00 Additional accessories such as larger touch screen, additional dowel station for different dowel sizes, scanner for program selection, or top rail gluing, available on request! Prices are net plus statutory VAT, excluding packaging/shipping and commissioning. (Technical data according to manufacturer – subject to change and without guarantee!)

Stanje: novo, Bore diameter variable mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Dimensions (L/W/H): 6100 x 1500 x 2300 mm Weight: 950 kg 1 NEW Drilling and Milling Center Götzinger Power Drill 300 With the Götzinger PowerDrill, depending on the requirements and configuration, you can: - Drill on end faces and longitudinal sides - Dowel door leaves, muntins, transoms - Drilling patterns are freely programmable - You can drill for handle olives and corner bearings using quick-change multi-spindle drilling heads - You can mill and drill for lock cases, lever handle sets, PZ cylinders, and 3D hinges - The machine is equipped with both horizontal and vertical milling units - Simple control allows you to create, save, and recall drilling and milling programs as needed Sturdy base frame with sheet metal cladding Table support: 1800 x 200 mm Processing units: X-axis – 500 mm effective travel Y-axis – 0–120 mm Z-axis – 0–105 mm (above the table) Horizontal units: 1 horizontal drilling unit (left dowel drilling unit) ----- Drill motor 220 V, 1.1 kW Collet chuck ER 25 4,000 – 11,000 rpm, adjustable 1 horizontal milling unit for lock cases ----- Milling motor 2.2 kW Speed adjustable, 3,000 – 16,000 rpm Collet chuck ER 25 1 horizontal drilling unit (right dowel drilling unit) ----- Drill motor 1,100 W, infinitely variable 4,000 – 11,000 rpm with ER 25 collet chuck Vertical units: 1 vertical drilling unit ----- Drill motor 1,100 W, infinitely variable 4,000 – 11,000 rpm with ER 25 collet chuck 1 vertical drilling unit – with quick-change drill head system ----- Drill motor 1.1 kW, 3,000 rpm Nodpfxoif Az Ue Ah Uewg Included: 1 Drill Head BKF 2/3, for corner bearing insertion, quick-changeable ----- For loose single parts, drill arrangement according to customer's hardware 1 Drill Head BKF 3, for handle olive including drill bits, quick-changeable ----- For loose single parts, drill bits: 1 Kubo d = 25, 2 x Dübo d = 10 1 vertical milling unit for lock case ----- Milling motor 2.2 kW Speed adjustable, 3,000 – 16,000 rpm Collet chuck ER 25 1 length stop left and right, useful length 2.7 m, NC controlled Control: electro-pneumatic with three axes NC position controller and integrated machine functions Input via TFT display, 10" color Machine complete, CE compliant, with 1 set of drilling tools: DÜBO each 1 x d = 6, 8, 10, 12 + 2 roughing end mills d = 16, ready to connect Shipping dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price for the above configuration, ex works: on request Plus freight and installation/commissioning (Technical data as provided by manufacturer – no guarantee!)

Stanje: novo, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW Speed: 2,800 rpm Compressed air connection: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10,645 x 1,000 x 1,300 mm SALVAMAC COMBO 500 – the semi-automatic crosscut saw with SALVASTOP 100 - electronic length stop/pusher ----- Item 1: Legend 500 Under-table Crosscut Saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, h max. 100 mm. The structure is built entirely from thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for mounting holes. Two-hand safety control for cutting, ergonomically positioned. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum balance and durability system. Shock-absorbing system. Independent pneumatic adjustment options to suit different types of processing. Durable and easy-to-replace saw blade positioning bar. Nsdpfevu Hd Tsx Ah Uewg HM carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electropneumatic control. Clamping movement system using innovative double dust-protected ball bearings and automatic lubrication system. CE-compliant electrical system. CE versions must be standard equipped with infeed and outfeed support tables at least 1 meter long. Technical data: ----- Max. saw cross-section mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade speed: 2,800 rpm Air consumption per cycle: 7 Nl Extraction connection: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Table height: 900 mm ± 20 mm Color: RAL 7035 - RAL 1007 Item 2: Salvastop 100 electronic length stop ----- - Working modes: 2 modes 1 x Stop (length stop moves to set length) 1 x Pusher (sequential processing of multiple lengths at the press of a button) - With servo drive - Pusher speed: up to 60 m/min - Pusher length: 600 mm - With 7'' touch display - Maximum workpiece weight for pushing: up to 100 kg - USB port COMBO_500 - 6400/7000 - Roller conveyor with guide, right side of the saw. Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, roller spacing 250 mm, width 320 mm, 3 m long. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demo machine additionally equipped with: UP & DOWN FRONT GUARD Movable, not fixed, front guard. The guard lifts during cutting to ensure safe working conditions. Loading and unloading wood is simplified by the lowered guard. The system features a specially secured pneumatic linear guide system using top-quality cutting-edge technology. SOFTWARE INTEGRATION FILES Preparation f...

Stanje: novo, max. workpiece length 4400 mm milling spindle 1 unit main motor 19.2 kW CNC machining center MASTERWOOD 4 WIN with automatic loading and unloading ----- Specially designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimal tooling setup - Simultaneous loading of up to 6 workpieces Nwedpfx Asd Nv Dcoh Usg - Patented clamping system for optimal workpiece machining - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for switching between external and internal profiling - INTEGRATED window manufacturing software; the machine does not have to (but can optionally) be operated via external industry-specific software from the office - Powerful 19.2 kW HSK-63 E motor - Loading and unloading conveyor - Additional table for arched window and door leaf processing Request a quote and see for yourself this unbeatable value for money! VIDEO of the machine attached! The technical description of the machine can be found in the PDF document on the right. We would also be pleased to take your used machine in part exchange at a fair price! (Technical data according to manufacturer – subject to change!)

Stanje: novo, Bore diameter variable mm Number of horizontal drilling heads: 3 pcs. Number of vertical drilling heads: 4 pcs. Weight: 1,500 kg Dimensions (L x W x H): 4,800 x 1,600 x 2,400 mm Width with table extension: 2,300 mm Nsdpfx Ajd Ih Hqeh Uowg Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill, depending on the setup and configuration, you can: - Drill for handle olives in the loose frame part or for finished sashes, with multi-spindle drilling head, quick-changeable, also for routing of lock case recesses for RC 2/security transmission - Drill for corner bearings in the loose frame part, with multi-spindle drilling head, quick-changeable, orientation by stop or measuring (tilt windows) - Vertical drilling from above for hardware, pre-drilling for clip in the loose frame part - Milling vertically from above for handles, profile cylinders, 3D hinge hardware - Horizontal drilling with 2 drilling units, different drill diameters, dowel drilling for end grain and longitudinal sides, setting blocks / transoms, mullions, corner joints, front doors etc. - Horizontal milling for lock case / hardware etc. Machine Description - Base frame in robust welded construction, linear guide for X-axis - Table support 3,000 x 200 mm - 6 pneumatic clamping cylinders with automatic retraction - 2 side stops for end grain machining, manually retractable - 2 longitudinal stops manually extendable/retractable Travel Ranges: - X-axis – 3,000 mm effective length - Y-axis – 180 mm - Z-axis – 105 mm Units: - 1 vertical drilling unit (Unit 1) from above, 1.1 kW drilling motor, speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25 - 1 vertical drilling unit (Unit 2) from above, 1.1 kW drilling motor, speed 3,000 rpm, with quick-change drilling head system - 1 drilling head BKF 3, for olives, quick-changeable - 1 drilling head BKF 3/2 for corner bearings, quick-changeable - 1 vertical milling unit (Unit 3) from above, 2.0 kW milling motor, 1,500 - 16,000 rpm, collet chuck ER 25 - 2 horizontal drilling units (Units 4 and 5) 1.0 kW, 1,500 – 12,000 rpm, collet chuck ER 20 - 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 – 16,000 rpm, collet chuck ER 20 Control: electro-pneumatic with 3-axis control X, Y, Z NC Position Controller by B + R, input via 10" TFT display Machine complete with 1 set of drill tools Ø 6, 8, 10, and 12 mm; 2 rough/finish cutters HM Ø 16 mm, CE compliant, ready to connect Extraction connection: 1 x Ø 120, 1 x Ø 80 mm Power supply: 1 x 400 V, 16 Amps Air supply: 1 x Ø 9 mm OPTION: Longitudinal stops right/left with NC axis high/low, programmable, dimension input by rebate or light measurement possible Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – machine weight 1,500 kg ----- Total price in the above configuration, ex-works: upon request Plus delivery and installation/training (Technical information according to manufacturer – without guarantee!)

Stanje: novo, Radijsko upravljanje / oddajnik s joystickom / oddajnik / sprejemnik: 1. Radijsko upravljanje / oddajnik s joystickom / oddajnik Tip: DRC - JD2 s 4 baterijami (novo). Nwodpfx Ahjyuy S Ue Uog 2. Oddajnik tip: DRC - 10 2ST D3 - 2 kosa (nova). 3. Sprejemnik tip: DRC - MP D3 (nov). 4. Elektronska plošča tip: DRC - DR D3 (nova). 5. Električna omarica s sprejemnikom tip: HBC FSE516 6. Sprejemnik tip: RC - E10 7. Radijsko upravljanje / oddajnik s joystickom / oddajnik - 2 kosa: Tip: FSS760 - 40 Tip: 716 - K 12973 8. Radijsko upravljanje / oddajnik s joystickom / oddajnik - 2 kosa: Tip: F24 - 60 TK 9. Radijsko upravljanje / oddajnik s joystickom / oddajnik - 2 kosa: Tip: F25 - 6D