Dynma Stiskalnica Za Telo nakup rabljenega (84.220)

Stanje: rabljeno, Leto izdelave: 1992, Mere: 5700 x 1300 x 2400 mm Skladišče: Nattheim Hodpfx Ajvvkl Dsgxol

Leto izdelave: 2025, stanje: novo, New machine Hedpjw Nafkjfx Agxel Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Stanje: rabljeno, Leto izdelave: 1989, Delovne dimenzije 3000 x 1250 x 650 mm Hod cilindra 110 mm Dimenzije stroja 3240 x 2120 x 770 mm Teža cca 900 kg Hodpoxu Egvofx Agxsl

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Proizvajalec: Hess Tip: Export Velikost korpusa: maks. 2.500 x 1.500 mm Hsdpfx Ajxgvwpogxol Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, manometer in oljna megla, anodizirane merilne letve, snemljive noge Lokacija: pri stranki - takoj na voljo -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 1998. Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA). Very good condition. Available immediately. Hodpfjh Iahgjx Agxol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 2002. Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA). Hedoh Iahcspfx Agxsl Very good condition. Available immediately.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Gannomat Concept 70 Eco Carcass Press Year of manufacture: 2025 including the following options: - Rapid traverse motion speed adjustment up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force Hodpfx Agovxgrroxsl • Pressing force min. 300/500 daN (kg) on Concept Eco, Pressing force min. 600/800 daN (kg) on Concept Primus • Pressing force max. 2200 daN (kg) on Concept Eco, Pressing force max. 3500 daN (kg) on Concept Primus • Three pressing and motion speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Very simple operation using 6 separate pushbuttons for 8 movement functions • Concept Primus: Very simple operation via LCD display Universal applications: • Cabinets, e.g. for furniture and wardrobes • Mitre carcasses • Carcasses with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple carcasses / drawers Advantages: • Industry-proven tolerance compensation (GANNOMAT system) • Electromechanical carcass press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to proven, high-quality components • Solid and robust construction • Space-saving design • Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple due to user-friendly, practical control panel • Fast due to positioning speed of pressure beams up to 50 mm/sec (option) • Efficient through precise pressing of various carcass sizes • Flexible thanks to adjustable parameters like pressing force, pressing time, and motion speed • Precise due to angle-accurate pressing of furniture carcasses and drawers • Professional production of carcasses and drawers with a modern carcass press

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Gannomat Mod. 260 Case Clamp Clamping capacity: 2500 x 1250 x 650 mm Working pressure: 0–10 bar Cylinder stroke: 110 mm Space requirements: 3240 x 2120 x 770 mm Weight: 900 kg Hodpfx Aorfbnbogxsl Year of manufacture: 2010 CE compliant The machine is currently being reconditioned; additional pictures will follow shortly.

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Kratek opis: Hsdedx R Dmepfx Agxsl • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Kratek opis: Hodpfxsdx R Dtj Agxsl • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: rabljeno, Leto izdelave: 1993, rabljeno, vrhunsko stanje Proizvajalec: Hess Tip: Express Leto izdelave: 1993 Strojna št.: 100914/28 Število cilindrov na stiskalni element: 2 – hod 110 mm Število stiskalnih elementov vodoravno: 3 Število stiskalnih elementov navpično: 3 Delovna širina: 2500 mm Delovna višina: 1350 mm Globina stiskanja: 600 mm pnevmatsko Električna nastavitev višine Potrebni prostor pribl. 3600 x 800 x 2450 mm Teža pribl. 1200 kg Skladišče: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v dejanskem stanju, kot je bilo ogledano, brez garancije ali jamstva Hodpfx Agoxuv N Uexjl

Stanje: zelo dobro (rabljeno), A) Case clamp with CNC (electronic) Type MDE 110/28/08 Hsdpfx Agjlkbn Isxjl Motorized transport and assembly conveyor Feed speed: 12 - 40 m/min CNC control Power Control PC C 22 T Total power 14 kW Overall machine length 6,220 mm Processing capacity for workpieces (mobile): Length Min / Max: 250 / 2,800 mm Depth Min / Max: 120 / 800 mm Height Min / Max: 280 / 1,320 mm B) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm) C) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Hodpob Eln Dsfx Agxsl Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams Hedpfxsw Sgnko Agxol - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. Hsdpfxeiidm Nj Agxel - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: dober (rabljeno), Korpusna preša, okvirna preša Korpus maks. 3000 x 2000 mm Zaščitna ograjna postavitev Varnostna svetlobna zavesa Sick C2000 Upravljalni panel Beijer Electronics E300 Operator Interface Odvod obdelovanca preko valjčnega zobatega trakovnega transporterja Hedpfx Agjvdchgjxsl Krmilna omara Programirljivi krmilnik Mitsubishi Q2ASCPU Mitsubishi A1SX81 Zaščitni pokrov Varnostna svetlobna zavesa C2000 služi kot zaščita rok za varovanje nevarnih točk na strojih in napravah. Možno je tudi financiranje preko naše banke. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši spletni trgovini! Stroški mednarodne poštnine na zahtevo!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, številka stroja/vozila: 941, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, delovna višina: 1.350 mm, delovna dolžina: 2.500 mm, TEHNIČNE PODROBNOSTI Hjdpfxsxnyg Rj Agxjl Dolžina stiskanja: maks. 2.500 mm Višina stiskanja: maks. 1.350 mm Delovna globina: maks. 600 mm PODROBNOSTI O STROJU Električni podatki Nazivna napetost: 3/N/PE/400 V Nazivni tok: 11 A Nazivna moč: 4,7 kW Frekvenca: 50 Hz OPREMA Vertikalni in horizontalni pritiskalni nosilci z elektromehanskim pomikom Ustvarjanje pritiska prek frekvenčno vodenih zobniških motorjev Pritisk stiskanja vertikalno in horizontalno nastavljiv ločeno Čas stiskanja nastavljiv

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, številka stroja/vozila: 221/93, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 16A Pneumatic connection 6 bar Total machine length 4300 mm Hedpfx Ajk Tzwdogxjl Total machine width 1300 mm Maximum pressing length 2650 mm Pressing width 1000 mm Pressing height 1000 mm Pressing pressure up to 150 bar Electric width adjustment with digital display Foot switch for pressing

Stanje: rabljeno, številka stroja/vozila: 008256, Največja obdelovalna širina: 800 mm Največja obdelovalna dolžina: 2500 mm Hjdox A Hfvepfx Agxsl Največja obdelovalna višina: 1340 mm Največja pomična hitrost: 40 m/min

Stanje: rabljeno, številka stroja/vozila: 008254, Maksimalna obdelovalna širina: 700 mm Hedpfx Agjx A Hfpsxel Maksimalna obdelovalna dolžina: 2600 mm Maksimalna obdelovalna višina: 1300 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 200 letvica, skupna masa: 33.000 kg, stiskalna sila: 1.000 t, hod: 650 mm, največja hitrost vožnje: 3.600 mm/min, TECHNICAL DETAILS Press force: 1,000 t Core plate clamping force: 30 t Travel speed: approx. 60 mm/s Hedpfey Hhqdex Agxjl Operating pressure: 200 bar Stroke of movable platen: 650 mm Stroke of mold carrier platen towards operator: 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on the plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump output: 9 kW Oil dynamics pump output: 11 kW Installed electrical power: 21.5 kW Hydraulic oil quantity: approx. 160 l Operating media Quantity of hydraulic fluid emulsified with water and 5% oil CIL-SOLIOIL-BK: approx. 1,300 l Nitrogen cylinders (60 l at 200 atm) for accumulator pre-charge: approx. 10 MACHINE DETAILS Weights Weight of press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total shipping weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic device for power regulation Electrovalve venting

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Medium heating plates for connection to the hot water system Central control panel with all operating elements Hodpey Egkgjfx Agxel Analog temperature display of the heating plates Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 190 mm, premer stranskega valja: 170 mm, dolžina valja: 2.600 mm, delovna širina: 2.500 mm, delovna višina: 700 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, maks. debelina pločevine iz nerjavečega jekla: 4 mm, skupna masa: 2.800 kg, skupna dolžina: 4.500 mm, skupna širina: 1.000 mm, skupna višina: 1.200 mm, moč: 4 kW (5,44 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 2, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, Kapaciteta upogibanja - Širina pločevine: 2500 mm - Debelina valjane pločevine: 6 mm - Pred-upogibna debelina: 4 mm Hedpoy H Aytofx Agxsl Dimenzije valjev: - Uporabna dolžina: 2600 mm - Zgornji valj: Ø 190 mm - Stranska valja: Ø 170 mm Konfiguracija stroja - Indukcijsko kaljeni valji s povečano površinsko trdnostjo vseh 3 valjev - Pogon vseh treh valjev, vsak z lastnim hidravličnim motorjem - Hidravlični nastavek za konusno upogibanje - Sistem za ponovno valjanje in zaokroževanje zvarjenih plaščev - Hidravlično odpiranje prednjega pokrova - Električna napetost: trifazna, 380 V/50 Hz, moč 5,5 HP - Neskončno nastavljiva hitrost od počasne do hitre, brezstopenjsko - Digitalni prikaz položaja upogibnih valjev.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Proizvodna linija za pelete na prodaj! Proizvajalec - GENERAL DIES. Zmogljivost - 2,5-3,0 t/h. Leto - 2021, s stiskalnico General Dies, ki še nikoli ni bila uporabljena (2026). Hsdpfx Aey Hfy Negxjl

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrags Ursprungsland Türkei Preis 20000 € Leasingrate 384 € Biegelänge 1270 mm Max. Biegekapazität - Baustahl 5 mm Max. Blechstärke ohne Anbiegung - Baustahl 5 mm Max. Blechstärke mit Anbiegung - Baustahl 4 mm Max. Blechstärke ohne Anbiegung bei D=5x Oberwalze 5 mm Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwal 4 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalzen 4 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalz 3 mm Oberwalzendurchmesser 130 mm Unterwalzendurchmesser 130 mm Seitenwalzendurchmesser 130 mm Hedeyb Sz Uepfx Agxjl Rollgeschwindigkeit 5 m/min Länge 3020 mm Breite 1150 mm Höhe 1110 mm Gewicht 2150 kg Motorischer Walzenantrieb Ober- und Unterwalze angetrieben Hydraulische Seitenwalzenzustellung 3 Digitalanzeigen Hydraulische Abklapplager Gehärtete Walzen Konischbiegevorrichtung Betriebsanleitung in DEUTSCH oder ENGLISCH OPTIONEN: Topsupport Seitensupport Variable Geschwindigkeit NC Steuerung