Drugi Stroji Za Odstranjevanje Napak nakup rabljenega (108.173)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 391 h, Funkcionalnost: popolnoma funkcionalen, Stroj za odstranjevanje izolacije koaksialnih kablov Schleuniger CoaxStrip 6380, leto izdelave 2023, večstopenjski stroj za odstranjevanje izolacije koaksialnih, triaksialnih, večžilnih in enojnih kablov, premer kabla min. 0,6 mm, maks. 8 mm, dolžina odstranjevanja izolacije maks. 40 mm, z enoto za pihanje z zračnim curkom, z natisnjenim SMI. Gbedpfx Abjz Nw Iysrsu

Leto izdelave: 2017, stanje: rabljeno, Letnik izdelave: 2017 Stanje: rabljeno Gsdpfx Ajz Ic Arebrjbu Dodatna oprema, prikazana orodja in vpenjalna orodja so del ponudbe le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in informacijah, ter do prodaje medtem, ko so informacije še na voljo!

Stanje: novo, Designation of model: Chamfering system UZ12 ULTRALIGHT Gsdpfek D Nyiox Abrsbu

Stanje: novo, Model designation Gbodpek Au Dvsfx Abreu Chamfering system B22 ZERO

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 11.800 h, laserska moč: 3.200 W, najv. debelina jeklene pločevine: 8 mm, maks. debelina pločevine iz nerjavečega jekla: 8 mm, maks. debelina aluminijaste pločevine: 4 mm, Brez minimalne cene – zagotovljen nakup po najvišji ponudbi! Vključno s SheetMaster, ToolMaster, GripMaster! TEHNIČNE PODROBNOSTI Laserska moč: 3.200 W Vrsta laserja: CO₂-laser TruFlow 3200 Delovno območje, kombinirano – brizganje/laser: 3.000 × 1.500 mm Delovno območje, brizganje: 3.000 × 1.500 mm Delovno območje, laser: 3.000 × 1.500 mm Maks. debelina pločevine, konstrukcijsko jeklo: maks. 8 mm Maks. debelina pločevine, nerjavno jeklo: maks. 8 mm Maks. debelina pločevine, aluminij: maks. 4 mm Maks. sila brizganja: maks. 220 kN Maks. število udarcev brizganja pri E = 1 mm: maks. 900/min Maks. število udarcev za označevanje: maks. približno 2.800/min Maks. število večnamenskih orodij pri 3 objemkah: maks. 18 Kapaciteta orodij: 180 orodij Maks. hitrost osi X/Y simultano: maks. 108 m/min PODROBNOSTI O STROJU Gbodpfx Aez Izu Tsbreu Delovne ure: 11.800 ur Laser vklopljen: 42.100 ur OPREMA SheetMaster ToolMaster GripMaster Delovno območje brez potrebe po premikanju pri velikih formatih Linearno revija z večnamenskimi orodji SheetMaster z dvema mizi za velike formate Samodejna odstranitev ostankov pločevine na dvižni mizi

Stanje: novo, Model designation B3 deburring/beveling machine Godpfx Ask Au Drsbrsbu

Leto izdelave: 1989, stanje: zelo dobro (rabljeno), Stock number:     2939 Manufacturer:     Held Year of manufacture:     1989 Gbodpfxju Un N Ej Abrsu Machine number:     3356 Type / Model:     E90 Workpiece support surfaces:     800 x 50 mm Speed:     8,400 rpm Power connection:     1.1 kW Accessories/Equipment:      Condition:     good Weight:     approx. 0.1 t Footprint:     550 x 500 mm Dimensions:     1,000 x 500 x 1,000 mm

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A deburring machine with extraction system is available. Passage width: 1000 mm, sheet thickness: 20 mm, minimum sheet size X/Y: 150 mm/100 mm, sound power level: 82 dB(A), feed rate: 4 m/min, dimensions X/Y/Z: approx. 2200 mm/1500 mm/1500 mm, weight: approx. 1600 kg, operating hours: 7152 h. Includes P. Ries 330 D Lissmac extraction unit, year of manufacture: 2007, filter area: 10 m², air volume: 3300 m³/h, negative pressure: 33 mbar. Documentation available. Godetul N Dopfx Abrebu

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), A deburring system (deburring cell) for post-processing of metal workpieces using a fettling robot is available. Documentation is provided. On-site inspection is possible. Gbodpfxowfg Huo Abrsu

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 715 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2530-01, delovna širina: 900 mm, Zaradi posodobitve strojev prodajamo naš skoraj nerabljen stroj Timesavers za mokro odstranjevanje robov. Stroj si je možno ogledati in ga preizkusiti, saj je priključen na elektriko. Za vprašanja smo vam na voljo. Godpfxsv Tnfij Abrebu

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od oddaje naročila Država izvora: Italija Cena: 13.600 € Mesečni obrok ob finančnem lizingu: 261,12 € Delovna širina: 1300 mm Obseg debeline pločevine – jeklo: 150 mm Premer krtače: 150 mm Obseg vakuuma: 250 x 350 mm Višina mize: 945 mm Gbjdpowiryhsfx Abrsu Motor: 0,75 kW Dolžina: 1400 mm Širina: 1000 mm Višina: 1450 mm Teža: 300 kg Easy T je ročno upravljani stroj za odstranjevanje ostrih robov, ki je primeren za različne procese obdelave kovin, kot so brušenje, odstranjevanje ostrih robov, zaobljanje robov in poliranje različnih vrst materialov – nerjaveče jeklo, jeklo, baker, medenina in aluminij. Brušna glava z dvema vrtljivima orodjema (brušni disk ali krtača) je nameščena na vrtljivem ročnem nosilcu. Easy T je opremljen s prosto nastavljivo hitrostjo in vakuumskim sistemom, tako da se obdelovanci pritrdijo na mizo. To je stroškovno učinkovita in učinkovita rešitev za tradicionalno brušenje in odstranjevanje ostrih robov. Vse robove obdelovanca je mogoče obdelati iz vseh kotov in smeri. Brušna glava je vrtljiva za 180 ° in omogoča hitro zamenjavo brusnega orodja. Lastnosti: * Brušni tlak se izvaja ročno. * Enostavno upravljanje, nizki stroški. Segmentna krtača zagotavlja zaobljanje robov obdelovanca. Standardne krtače imajo premer 150 mm. Za odstranjevanje ostrih robov izdelka se uporablja podporna plošča z brušnim diskom. Odvisno od višine in trdote ostrega roba lahko brusni disk nastavite pod rahlim kotom, da izvajate večji pritisk na oster rob.

Stanje: dober (rabljeno), Leto izdelave: 2011, Edges and contours - Deburring machine ROLEI Type: 00645-KKE2, year 2011. Gjdpfx Abjwnpflorsbu

Stanje: skoraj kot novo (rabljeno), EX-DEMO MACHINE For sale is an as-new JET belt and disc sanding machine, model JSG-31A, with a disc diameter of 300 mm. This exhibition model is in its original condition and therefore comes with the full warranty. Technical specifications - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Disc table tilt range: -45° to +15° - Belt size: 150 x 1,220 mm - Belt speed: 11.5 m/s - Belt sanding table size: 190 x 330 mm - Belt sanding table tilt range: -45° to 0° - Belt arm swing range: 0° - 90° - Extraction connection: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Godpfxjycc Tde Abrsbu Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Leto izdelave: 2017, stanje: rabljeno, Delovna širina 200 mm Priključna napetost 400 V / 50 Hz Nazivni tok 25 A Priključna moč 10 kW Brušilni stroj za obdelavo površin z odsesavanjem Stanje: rabljeno Dodatna oprema, prikazana orodja in pritrdilna orodja so vključena v obseg dobave Gedez Ic Axepfx Abrjbu le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in specifikacijah ter pravico do prodaje medtem.

Leto izdelave: 2003, stanje: rabljeno, Technical details: Workpiece length: 130 - 2000 mm Minimum diameter: Ø 10 mm Maximum diameter: Ø 60 mm Control system: Fagor 10/102 S Machine dimensions approx. LxWxH: 3.8 x 3.8 x 1.9 m Control cabinet dimensions LxWxH: 1.2 x 0.6 x 2.2 m Machine weight approx.: 4,500 kg CNC milling and deburring machine for both ends of tubes or round steel. - Material feed via conveyor belt, travel length approx. 3,300 mm - Brush unit type PGAS 8/100 V-HV on both sides/opposed, speed 10,000 rpm (driven by compressed air) Gbsdsu Ngc Nepfx Abrsu - Milling cutter holders, both sides/opposed - Milling spindle and brush holder arranged in sequence - Operation via control panel on the control cabinet Supports: - 2 units: 1x movable, 1x fixed - Lateral adjustment of right support: length 1,725 mm manually - Working strokes: cross = 5-50 mm; longitudinal = 5-50 mm - Working spindle: max. speed 320 rpm.

Stanje: rabljeno, Leto izdelave: 2005, skupna dolžina: 3.940 mm, skupna širina: 1.980 mm, skupna višina: 2.010 mm, Poids à vide : 7 000 kg Largeur de travail : 950 mm Hauteur de travail : 0,5–120 mm - Année de construction : 2005 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : - Commande : CNC - Nombre de stations [pcs] : 3 - Type de station 1 : Bande abrasive - Type de station 2 : Brosse rotative - Type de station 3 : Brosse rotative - Puissance [kW] : 39 - Épaisseur min. de la tôle [mm] : 0,5 - Épaisseur max. de la tôle [mm] : 120 - Largeur de travail max. [mm] : 950 - Dimensions de transport : 3940 mm x 1980 mm x 2010 mm (L x l x H) - Poids de transport [kg] : 7 000 kg - Nombre de colis de transport : 4 Informations financières TVA : Le prix indiqué s’entend hors TVA Gedpfxsxwnbue Abrjbu TVA/Régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Lukas van Rossum

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, Gjdpfx Ajt Hw Shobrobu emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2015, Dolžina obdelovanca je poljubna, v mm Širina obdelovanca 1500 mm Višina brušenja maks. 100 mm Število vrtljajev brusilnega vretena 400–1600, brezstopenjsko Podajanje, brezstopenjsko 1–5 m/min Nazivna moč 4 x 2,2 kW Premer odtočnega priključka 200 mm Skupna potrebna moč približno 9 kW Teža stroja približno 1,8 t Potreben prostor približno 1,9 x 2,4 x 1,9 m Gjdpsz I Ucdjfx Abrebu Naprava za odrezovanje robov in zaobljanje za izsekovane in lasersko obdelane dele. Discmaster 4Td je opremljen z dvema velikima diskovoma za odrezovanje robov in dvema diskovoma za zaobljanje, ki se med obdelavo večkrat premikajo po celotnem obdelovancu. Ta edinstvena tehnologija omogoča stroškovno učinkovito zaobljanje izsekovanih in lasersko obdelanih delov ter ponuja bistvene prednosti pred tradicionalnimi stroji. Stroj: 2 brusilne enote na vhodni strani, premer 250 mm, pogon 2,2 kW, ločena nastavitev višine - 2 brusilne enote na izhodni strani, premer 250 mm, pogon 2,2 kW, ločena nastavitev višine - Transverzalna oscilacija brusilnih enot prečno na smer podajanja, motor z reduktorjem 2,2 kW - robustno linearno vodilo za oscilacijo - zaprto ohišje stroja - 4 vzmetne gume z valjčki za pritisk - podajanje transportnega traku - stalna višina mize (višina obdelave) - pnevmatsko krmiljeno centriranje transportnega traku - vodilo celotne brusilne enote v 4 močnih okroglih vodilih in trapezoidnih vretenih - krtača za čiščenje transportnega traku - vključno z brezstopenjsko regulacijo števila vrtljajev brusilnih enot - vključno s čistilnimi krtačami, rotirajoče, premer 120 mm, širina 1500 mm - zaščitni pokrov na vhodu za prevelike obdelovance - nastavitev debeline obdelovanca z motorjem za majhne dele od 20 x 20 mm do širine materiala 1500 mm

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Ponujamo strojno opremo za odstranjevanje ostrih robov – Bütfering. Največja delovna širina: 1350 mm, podajalna hitrost: 20 m/min, stopnje obdelave: 3, 1. stopnja obdelave: brusni trak, 2. stopnja obdelave: 2 vrsti krožnih čopičev, 3. stopnja obdelave: polirni trak, minimalna in maksimalna debelina obdelovanca: 0,5 mm/100 mm, maksimalna debelina materiala: 100 mm. Vključuje poškodovan transportni trak in brusne trake. Dimenzije stroja: 2000 mm/2050 mm/3400 mm, teža: približno 6000 kg. Ogled je možen po predhodnem dogovoru. Gbsdpjzl U I Dofx Abrsu

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Na voljo je robotski stroj za odstranjevanje srha Rausch. Višina vpenjanja: 1050 mm, hitrost vretena: 50000 obr/min, moč: 1 kW, max. debelina srha: 0,2 mm, max. premer obdelovanca: 500 mm, vrste zobnikov: ravni/spiralni/poševni, max. poševni kot: 40°, max. kot posnetja: 45°, max. dolžina obdelovanca nad vpenjalom: 450 mm, max. teža obdelovanca: 50 kg. Dimenzije stroja X/Y/Z: pribl. 2050 mm/1200 mm/2100 mm, teža: pribl. 1300 kg, obratovalne ure: 1271 h, uporabni čas: pribl. 8 h. Dokumentacija je na voljo. Ogled na lokaciji je možen. Gsdeyxq Uiepfx Abrebu

Stanje: novo, Leto izdelave: 2024, Delovna širina: 380 mm Delovna višina: 150 mm 1. Sklop, rotorska skupina: Skupina 5 nihajnih rotorskih ščetk, Ø 115 mm, vsaka z motorjem 3 kW 2. Sklop, ščetka: Scotch Brite Hard / premer 210 mm, variabilni pogon Gedpetnf Rrjfx Abrsbu Nastavitev višine: ročni ročaj Prikaz višine: mehanski števec Hitrost podajanja: 4 - 12 m/min Moč pogonskega motorja: 0,37 kW Vakuumska preproga: da Dolžina stroja: 1400 mm Širina stroja: 900 mm Teža: 500 kg

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Sheet thickness range – structural steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Extraction connection: Ø 120 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine made of stress-relieved steel-welded construction for a stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta starting of main motors * Analog ammeters for each group * Digital display for sheet thickness with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel frame, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed by frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers on front and rear tables. INCLUDES OPTIONAL TAMPICO BRUSH FOR CONVEYOR BELT CLEANING 1st WORKING UNIT – R Balanced contact roller, anti-oil and heat-resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinder for automatic positioning and lift-off in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic brake in emergency. Pneumatic tensioning system for sanding belt. Abrasive belt centering system with electronic photo sensor. Oscillation adjustment for width and time. Contact roller positioning accuracy mm +/- 0.02 Contact roller positioning speed m/s 10 Contact roller diameter mm 125 Rubber roller hardness Shore 55 Sanding belt speed m/s 3 - 18 Motor power kW 7.5 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Oscillating lateral movement of the entire group. Quick-change system for brushes. Brush diameter mm 115 Number of brushes pcs 8 Oscillation stroke mm 15 Rotational motor power kW 2.2 Speed rpm 1,000 Oscillation motor power kW Gjdpfowiqukex Abrjbu 0.37 Brush linear speed m/s 10.0 Optional equipment: B group – external horizontal drum brush Ø 150 mm with Scotch Brite brush €5,150.00 with 0.3 mm wire brush €6,060.00 R GROUP – ABRASIVE BELT Motor 11 kW €740.00 X GROUP – CUP BRUSHES Motor with variable speed 5.5 kW 350/1,100 included OPTIONS: Return to Sender System (machined part output to the front) €1,770.00 Conveyor belt with vacuum system – 3.0 kW €5,150.00

Stanje: dober (rabljeno), Stroj za odstranjevanje izolacije kablov, naprava za odstranjevanje izolacije kablov, stroj za luščenje kablov, naprava za luščenje kablov, sistem za recikliranje kablov -Proizvajalec: Yngves MEKANISKA AB, naprava za odstranjevanje izolacije kablov Gbedpfx Absz Dua Ijrju -Tip: K74-1 -Motor: ABB 2,2 kW -Dimenzije: 1600/1200/V1600 mm -Teža: 314 kg

Stanje: dober (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 2.309.044, Offer 23195 Precision Deburring and Chamfer Milling Machine / Edge Milling Machine Technical specifications: - Suitable for processing steel, stainless steel, aluminium, and plastics Godsnvdtcspfx Abrsbu - Deburring and chamfering process performed with milling cutter - Chamfer angle: 45° - Chamfer width: steplessly adjustable - Guide rail length: 500 mm - Working height: 750 mm - Spindle speed: 2750 rpm - Drive: 400 V / 0.7 kW - Required floor space: approx. W 500 x D 400 x H 850 mm - Weight: approx. 30 kg

Leto izdelave: 2026, stanje: novo, Working width: 950 mm Maximum workpiece thickness: 1.0 – 50 mm Abrasive belt width: 970 mm Abrasive belt length: 1900 mm Machine weight: approx. 1.8 t The SMD 123 RE is a universal entry-level machine designed for deburring, uniform all-round edge rounding, and surface grinding of sheet metal in dry processing. * Suitable for processing steel, stainless steel, and aluminum. * The non-slip conveyor belt ensures safe transport and processing of even small workpieces. * The two rotary heads provide uniform edge rounding on all sides and a non-directional surface finish. * Intuitive touch panel operation enables any operator to quickly become familiar with the machine. * SMD 1 models are quickly installed and ready for operation. Gbodovfhm Dopfx Abrju * The compact design saves valuable production space. * Low acquisition and operating costs result in short payback periods and guarantee economical processing of your workpieces. Includes: - SMD 123 RE grinding machine (kit) - SMD 123 RE conveyor belt cleaning unit - SMx xx3 – sanding belt +120 Cubitron II, width 970 mm, length 1900 mm - SMD 1x3 set of 3-piece abrasive flap roller P120 - DDE 3002 dry extraction system - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Additional detailed technical data available on request. The machine is available for immediate delivery from stock in Niederlangen.