Daf Lf260 Schiebeplateau, Hubbrille Sofort Verfügbar nakup rabljenega (2.840)

Stanje: novo, prevoženi kilometri: 500 km, moč: 189 kW (256,97 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 11.990 kg, dolžina tovornega prostora: 6.400 mm, širina tovornega prostora: 2.450 mm, emisijski razred: Euro 6, barva: rumena, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, IMMEDIATELY AVAILABLE!!! - Registered in Poland for daily use due to tachograph requirements Tow Truck on DAF LF 260 * Rear axle with air suspension, operated via wired remote control * Power take-off (PTO) * Driver's cab with luxury twin passenger bench seat, velour upholstery * Radio/USB player * EU digital tachograph * Roof hatch with manual operation Recovery Body * Sliding platform controlled by wireless remote or manually adjustable control levers Lasdpogl Hhtsfx Al Iob * Complete platform operation possible via remote control * Underlift operated with manual levers * Underlift lifting capacity: 2,500 kg * Loading platform approx. 640 x 245 cm * Payload: 4,180 kg * Hydraulic winch, operable via wireless remote or manually adjustable control levers * LED rear lights * LED lighting on light-bar holder * LED light bar * Work lights * Storage boxes * Trash bin, broom, shovel, and grit/sand container * Pin coupling * Ball hitch * 2x wheel chocks * Body fully hot-dip galvanized

Stanje: novo, prevoženi kilometri: 100 km, moč: 251 kW (341,26 KM), vrsta goriva: dizel, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 7.000 mm, Leto izdelave: 2022, Oprema: ABS, filter saj, klimatska naprava, * Chassis suitable for approx. 7,000 mm body length Ljdsqqf Nhspfx Al Ioab * Wheelbase: 4,900 mm * Allison 6-speed automatic transmission * Adaptive cruise control * Lane keeping assist * Automatic climate control * Heated seats * Differential lock * Euro 6 * Spoiler * Sun visor * Short cab * Glass roof hatch * Luxury driver’s seat * Leaf/air suspension * Powertrain extended warranty: 3 years or 300,000 km * 4 identical vehicles available immediately

Stanje: novo, moč: 129 kW (175,39 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 7.200 kg, dolžina tovornega prostora: 6.700 mm, širina tovornega prostora: 2.400 mm, barva: rumena, število sedežev: 3, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, ----IMMEDIATE AVAILABILITY!!!---- IVECO DAILY 70C18H/P Payload approx. 2880 kg * German documentation * Without registration * 2 years manufacturer's warranty from Iveco * GVW 7200 kg * EURO VI E * Power take-off (PTO) possible only in combination with manual gearbox, original from Iveco! * Factory-installed air suspension on rear axle * Driver’s seat with hydraulic suspension * Central locking with remote control * Radio with Bluetooth Laedpfsuk T Exsx Al Ieb * Multifunction leather steering wheel * Electric windows * Electrically adjustable exterior mirrors Sliding platform: * ALUMINIUM FRAME * Sliding platform hydraulically driven via remote control or manually by control lever * Hydraulic winch with wireless remote control * Side underrun protection painted in vehicle colour * LED light bar * Storage boxes * Mudguards with mud flaps * Tow bar with 3300 kg towing capacity Load securing equipment also available from us: * Lashing straps and tension belts * Load bars * Safety vests * Transport boxes * Edge protectors * Airbags * Wheel chocks * etc. Financing and leasing available We manufacture bodies of all sizes and types for every chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies - Complete vehicles - Trailers - Consulting - Financing Errors and prior sale reserved, no liability for printing and input errors.

Leto izdelave: 2026, stanje: novo, NEW - - Ideal for removing panels from your vertical panel storage. - Suitable for in-house transport of panels to vertical or horizontal panel saws. - The continuously height-adjustable support surface can be precisely set to the height of your panel saw. - Panels weighing up to max. 250 kg can be transported or swiveled by a single operator. Lodpfed Tyaajx Al Ioab Technical data: Support height: - vertical: approx. 120 - 340 mm - horizontal: approx. 890 - 1200 mm Max. panel size: 5200 × 2100 mm Load capacity: 250 kg Location: Available ex stock 54634 Bitburg - Available immediately - Shipping within Germany: 90,- Euro net

Stanje: novo, Leto izdelave: 2025, Panhans Bandsaw Machine BSB 800 TECHNICAL DESCRIPTION Robust German engineering Machine frame in an elegant, modern, torsion-free double-chamber steel welded construction Upper and lower doors safeguarded by limit switches Upper and lower precision bandsaw blade guide APA 2, size 2 Finely planed cast iron table Tilting table plate up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tires Fence rail can be used on the left of the saw blade; fence profile reversible Blade tension indicator 1 piece saw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.301 Mechanical height adjustment of saw blade guard via handwheel with locking ratchet Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS certified Machine frame left-hand version Rotary cam switch with star-delta start and emergency stop button Wheel diameter: 800 mm Blade speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm Ljdpor Igzcefx Al Ijab Optionally, with special coating: min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Table height: 930 mm Extraction ports: 2 x Ø120 mm Motor power: 4 kW / 5.5 HP Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 525 kg Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Lsdpfx Aok H Ic Ujl Ieab Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Lasdoff Hdpepfx Al Iob Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Lajdpfxob Eln Do Al Ijb Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" Lajdpfxehqb Rco Al Iob 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Laedpfx Alegf Sw Ne Ijb Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: novo, Leto izdelave: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precision linear ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable end stops Ledpfjcnz Rvjx Al Ieab Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range, horizontal: 45°-90°-25° Mitre range, vertical: 60°-90°-30° Saw blade Ø: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: Ex stock 54634 Bitburg - Immediately available - We can also supply the saw blade on request.

Stanje: novo, Leto izdelave: 2026, CASADEI Libra 35 – Wide Belt Sander, Dual-Belt Version Immediately Available – Ex stock 54634 Bitburg Technical Data: Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Sanding belt width: 1115 mm Sanding belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table height adjustment motor: 0.25 kW Drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Illustration with optional equipment. Wide belt sander in dual-belt configuration for up to 1100 mm working width, with numerous equipment options for cost-conscious craftsmen and workshops. Robust mono-block steel machine frame, reinforced with tubular supports and high-mounted working units for maximum rigidity User-friendly operation thanks to clearly arranged control panel at the front Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air demand Automatic star-delta start for main motor Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt drive via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Ljdpfocr S Ecex Al Ieab Pneumatic belt tensioning for each unit with fine adjustment capability for the grit/belt thickness Quality – Made in Europe Version RTC: 1st unit: diagonally grooved steel roller Ø 120 mm, with fine adjustment for calibration 2nd unit: combination unit with fine adjustable working height for calibration and fine sanding; rubber-coated roller Ø 120 mm (45 Shore), and hard sanding pad with graphite plate on replaceable insert Scope of delivery: Working table height adjustment with electronic display of working height Oscillation of sanding belts via electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-backflow device (C.E.) Star-delta starting of main motors Grooved calibration steel roller Selector switch for sanding pad positioning from control panel Optional accessories: – Semi-hard flat sanding pad – Automatic belt centering system Location: Ex stock Bitburg – at a special price

Stanje: novo, moč: 355 kW (482,67 KM), vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2026, Oprema: ABS, filter saj, klimatska naprava, parkirni grelec, EQUIPMENT: * Front chassis design: Aero underbody plate * Air-suspended cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windscreen with sun protection film * Exterior sun visor * Two LED headlights for cab rear panel * Reversing camera with pre-wiring for second camera * DAF Corner View * LED headlights and fog lights * Fixed cab entry * XG cab * DAF digital vision system Lodpjyq Uziefx Al Ijab * Headlights without height adjustment * LED skylights * Handle and surround: black; side wall: cab color * LED daytime running lights * Side skirts with lower extensions * Widened side fenders, one side foldable * Adjustable roof spoiler for XG cab * Lower cab step: Crystal White * Chassis color: anthracite grey * CRYSTAL WHITE * Headlamp surround color: Crystal White * Bumper color: Crystal White * Roof spoiler color: Crystal White * Side fender color: Crystal White * Side skirt color: Crystal White * DDVS housing color: Crystal White * Leather steering wheel * Electrically operated roof hatch * Integrated stationary air conditioning * Driver’s seat: Luxury Air * Pneumatic tool preparation * Xtra Comfort mattress for lower bunk * Automatic cab climate control * Curtains with partition curtain * Refrigerator and drawer * Armrests on both sides of the driver’s seat * Storage compartment with drawer in center console * Accessory power supply: Standard + 2x 40A * ECAS remote control with extended functions * Interior trim color scheme: Exclusive * Dashboard table * Passenger seat: cinema type with fabric upholstery * Driver’s seat with fixed base * Door trim: loosely woven fabric * Cab interior trim: hexagon * Passenger seat with fixed base * Luggage compartment * Safety net on both bunks * Dashboard version: Plateau * LED interior lighting * Parking heater with heat pump and timer * Digital tachograph, VDO version G2V2A * Speed limiter, set to 90 km/h * Antennas: radio, 2x mobile, GNSS extra: CB * Speakers: luxury * Adaptive cruise control with FCW and AEBS-3 * Predictive cruise control * Toll system preparation * PACCAR Connect * Basic infotainment * Driver Performance Assistant * Reversing warning system * Lane change warning system * Hill start assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness & Distraction Detection * Rear axle load capacity 13.00 t * Stabilink rear axle suspension * Front leaf suspension: standard * One ride height position, standard height * Front: 8.00 t, parabolic, 163N * Rear: air suspension SR1344 * Front axle 1: 8,000 kg, load index 156 * Rear axle 1: 12,600 kg, load index 148 * Michelin * Front axle(s): 385/55R22.5 * F1, 385/55R22.5 MI XLEF3P 160/000 K Steering ABA 3P * R1, 315/70R22.5 MI XMGD 154/150 L Traction DCB 3P * Wheel trims, silver grey * Tire pressure monitoring system * Driven rear axle(s): 315/70 R22.5 * Steel disc wheels, silver grey * ECO performance * Rear axle ratio 2.05 * Mechanical differential lock * MX-13 engine, 355 kW/483 hp, cab badge: 480 * Emissions standard: Euro 6 * Standard transport, full version * Shunting mode * Automated transmission, TraXon, 12-speed * Automated transmission with manual mode – full version * Traction control (ASR) * 12-speed TraXon gearbox 12TX2210 DD, 16.69–1.00 * ZF-Intarder * 2-cylinder compressor with clutch * Driven rear axle with S

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, nosilnost: 5.000 kg, dvižna višina: 6.300 mm, prosto dvigovanje: 2.070 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.950 mm, moč: 54 kW (73,42 KM), dolžina vilic: 1.400 mm, vrsta pogona: Diesel, Sideload forklift Load centre: 700 mm Mast type: Triplex Transmission: Hydrostatic Laodjy H Tilopfx Al Ijb Condition: New machine Technical condition: New Front tyre type: Pneumatic Rear tyre type: Pneumatic Description: NEW MACHINE!!! - immediately available!!! Fork positioner, 3rd valve, 4th valve, heater, road approval (STVZO), full cabin, full free lift, CE certificate, interior mirror, height-adjustable forks +/- 100 mm

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 3.000 h, Kramer 180 Leto izdelave: 2010 Delovne ure: cca 3.000 h Takoj pripravljen za uporabo vklj. preklopna žlica vklj. paletne vilice Ljdpfx Aeyluvpsl Ioab Servis: nov UVV: novo

Stanje: novo, Leto izdelave: 2023, New Fiber Lasers of the HLE Series – Optimized configuration focused on the essentials – Low acquisition costs despite high-quality components. Max Photonics resonator and Precitec cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs. SPECIFICATION: Cutting head: PRECITEC LIGHT CUTTER – Auto Focus Resonator 3KW (6KW/8KW/12KW optional) Automatic shuttle table incl. safety light barriers Extraction unit: DONALDSON DFOE CE certified Ljdjqgcx Uepfx Al Ijab BECKHOFF control system with touchscreen Sheet format 3,000mm x 1,500mm (4,000 x 2,000 optional) Maximum sheet thickness at 3KW: Mild steel: 15mm Stainless steel: 10mm Aluminum: 10mm Copper: 6mm Power connection max. 30kW Footprint approx. 9,000mm x 3,000mm x 2,200mm The machine comes including: - 24-month warranty - CAD CAM software Libellula [CUT], 1 license - Commissioning - Delivery within Germany and - Software / operator training offered Connect gas and power, and you are ready to operate. In our showroom, we have a range of laser machines from our manufacturers under power, as well as various materials available for testing. We are happy to invite you to visit us and cut your drawings or your material. We, H+S, have been an exclusive distributor and service provider for YAWEI machines for 15 years, selling their fiber lasers for approx. 8 years. We have already installed more than 300 YAWEI fiber lasers. Convince yourself, also at a location near you. An identical HLE1530 3kW can be tested at any time at our facility. Call us and visit us!

Stanje: novo, Leto izdelave: 2023, laserska moč: 8.000 W, Fibre laser machine HLF available from stock, ready for immediate delivery. An identical machine can be tested under power at our facility. Performance: 8kW Sheet size: 3000 x 1500mm automatic shuttle table incl. ball transfer system for scratch-free workpiece positioning Siemens touchscreen control with LAN/USB Siemens drives Precitec Auto Focus Procutter cutting head sheet metal measurement IPG resonator with 8kW / alternatively MAX Photonics small parts conveyor belt includes: Warranty CAD / CAM software Commissioning Delivery (within Germany) Donaldson extraction unit Training available Lodpfeqgcwtjx Al Ioab This machine is a stock machine and therefore available at short notice. We already have 300+ similar and identical machines operating under power in Germany and throughout Europe. Reference visits to users are possible at any time. Contact us now!

Stanje: novo, Leto izdelave: 2023, laserska moč: 6.000 W, We have been trading YAWEI fiber laser machines for over 7 years and provide comprehensive service for these systems. All you need to supply are gases and electricity—we take care of everything else. We have already installed over 300 YAWEI fiber lasers across Europe. We are currently offering a new YAWEI fiber laser stock machine, model HLF1530. Performance: 6kW Mild steel up to 25mm / Stainless steel up to 15mm / Copper up to 8mm Sheet size: 3000 x 1500mm Lsdpjqgcyrofx Al Isab Siemens DsL touchscreen control with LAN/USB Siemens drives THK linear guides Automatic shuttle table with light barriers Precitec Autofocus Procutter cutting head MAX Photonics resonator with 6kW and on-site warranty in Germany Small parts conveyor belt Ball transfer table for scratch-free, easy sheet metal handling 24-month warranty CAD/CAM software Commissioning Delivery (within Germany) Training CE certification This is a stock machine. An identical model can be demonstrated under power at our facility at any time. Call us today!

Stanje: novo, lastna masa: 6.020 kg, največja dovoljena obremenitev: 27.980 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Oprema: ABS, Schwarzmüller K-serija, 3-osni jekleni segmentni keson | Prostornina: ca. 25 m³ | ABS / EBS | 9 t SAF osi z disk zavorami | Polno zračno vzmetenje | Zunanja loputa | Pnevmatike: 385/65 R 22,5 | Jekleni zaobljeni keson 7.650 mm x 1.470 mm | Dno iz 5 mm HB 450 | Stene iz 4 mm HB 450 | Spredaj podest | Lastna teža 6.020 kg | Ročna tenda | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Lajdpfxjywywks Al Ieb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, - NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch: RINSE - GLUE - GLUE/INSERT - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with viscosity from 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via electronic system time preselection - Selector switch GLUE/WATER for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and waste water collection container) - Indicator light for glue remaining quantity display in glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for rinsing/cleaning Lajdpjdwi Rksfx Al Ieb - 4 castors for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm, insertion overhang 7 - 20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, Motorized thickness table elevation with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thickness table Standard with noise and chip protection curtain at workpiece infeed and outfeed Adjustable pressure of feed rollers Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Features TERSA models with Tersa planer cutterhead Planer knife change in seconds Upon starting the machine, the planer knives are automatically tensioned by centrifugal force—self-locking The knife projection is automatically set without using setting gauges Working Table The working table is mounted on four large trapezoidal-thread spindles, guaranteeing maximum stability under all operating conditions Standard with electric table adjustment Thanks to the special lifting mechanism, the table position remains perfectly maintained even without locking Helical-toothed steel infeed rollers for constant and uniform wood feed Second, rubberized feed roller at the outfeed Massive anti-kickback devices prevent workpieces from being thrown back A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter (thicknesser): 150 mm Drive Power Main motor: 9 kW Installation Information Space requirement – Length: 1305 mm Space requirement – Width/Depth: 1080 mm Space requirement – Height: 1197 mm Space requirement explanation: Dimensions account for maximum travel paths or usable lengths. Machine body – Length: 1305 mm Machine body – Width/Depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add stated dimensions to space requirement to determine the recommended free installation area for the machine. Thicknessing Thicknessing table – Length: 630 mm Thicknessing table – Width: 1000 mm Working height min.: 3.5 mm Working height max.: 300 mm Working length min.: 210 mm Max. chip removal: 8 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Network frequency: 50 Hz Planer Cutterhead Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 4500 rpm Max. planing width: 630 mm Feed Ledjy Eg Apepfx Al Ioab Feed speeds: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, prevoženi kilometri: 6 km, moč: 120 kW (163,15 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, število sedežev: 3, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Nemško novo vozilo, z enodnevno registracijo, ABS, ESP * Centralno zaklepanje z daljinskim upravljalnikom * Široka ogledala * Radio z Bluetooth * Voznikov vzmeteni sedež * Nosilnost pribl. 1.400 kg. Nakladalna ploščad: Nadgradnja 4200 x 2100 x 400 mm * Aluminijasto ogrodje iz C-profila * Nakladalna površina iz 15 mm večplastne plošče Oprema za pritrjevanje tovora je na voljo pri nas: * Napenjalni in pritrdilni trakovi * Prečne letve * Opozorilni jopiči * Transportni zaboji * Zaščita robov * Vreče za zavarovanje tovora Laedpsw Scllsfx Al Isb * Blokade koles * itd. Možnost financiranja in leasinga Izdelujemo nadgradnje vseh velikosti na vsa šasija. Ponjava, GFK sendvič, aluminij. Obiščite nas na: Nadgradnje - Celotna vozila - Priklopniki - Svetovanje - Financiranje Pridržujemo si pravico do sprememb, vmesne prodaje in napake pri tiskanju ali vnosu.

Stanje: novo, največja dovoljena obremenitev: 28.950 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.450 mm, prostornina tovornega prostora: 70 m³, skupna širina: 2.550 mm, skupna višina: 3.800 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Knapen Walking Floor K 200 A6070 with 70.5 m³ capacity * BPW axles * First axle as lift axle, operated by switch in cab (the equipment for the kingpin locking system is not included in this offer) * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * Tires: 385/65 R22.5 * Landing gears with sliding adjustment * Plastic tool box * 6 mm floor with 21 planks * Undercarriage with full complement of slide bearings * Stainless steel wear plate beneath the floor * Rear doors with double locking bars * One grain chute per door leaf * Radio remote control for the walking floor, lift axle, and auxiliary spotlights * Manual sliding tarpaulin with side straps * Tarpaulin supports with 3 positions * Multi-chamber LED lights Lsdoy H Tltopfx Al Ijab * 1 pair of red LED lights on the rear hoop * Side marker lights with indicator function * Reversing alarm * Air connection at the left rear * 6 additional reverse lights: at the landing gears, in front of the last axle, and in the lighting bracket * Bodywork painted in RAL 7004 SIGNAL GREY * Chassis anodized * Photos show optional equipment not included in the offer price. * !!! THE TRAILER IS PAINTED IN RAL 7004 SIGNAL GREY !!!

Stanje: novo, največja dovoljena obremenitev: 29.300 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.450 mm, prostornina tovornega prostora: 60 m³, skupna širina: 2.550 mm, skupna višina: 3.800 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Knapen Moving Floor Trailer K 200 A6070 60 m³ * BPW axles * Front axle with lift function, controllable via switch in the driver's cab (equipment for the fifth wheel coupling is not included in the offer) * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * Tyres 385/65 R22.5 * Landing gear with load equalizer * Plastic toolbox * 6 mm floor, 21 boards * Subframe equipped with a full set of slide bearings * Stainless steel wear plate under the floor * Rear doors with double locking bars * Each door wing with a separate grain hatch Lajdoy H Tlmspfx Al Ijb * Wireless remote control for the floor, lift axle, and auxiliary headlights * Manual sliding roof with side straps * Tarpaulin supports with 3-position adjustment * Multi-chamber LED lights * 1 pair of red LED lights on the rear hoop * Side marker lights with indicator function * Reversing alarm * Air connection at the rear left * 6 additional reversing lights: at the landing legs, in front of the last axle, and in the light bracket * Body painted in RAL 7004 SIGNAL GREY * Chassis anodized * Photos show optional equipment not included in the offer price * !!! THE TRAILER IS PAINTED IN RAL 7004 SIGNAL GREY !!!

Stanje: novo, prevoženi kilometri: 21 km, moč: 110 kW (149,56 KM), vrsta goriva: dizel, lastna masa: 2.895 kg, največja dovoljena obremenitev: 605 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: drugo, število sedežev: 3, dolžina tovornega prostora: 2.720 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, centralno zaklepanje, filter saj, klimatska naprava, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, spojka prikolice, zapora diferenciala, žerjav, FUSO Canter 3S15 aluminum flatbed with loading crane—available immediately. The vehicle is for rent with a purchase option. Chassis: Fuso 3S15 Canter - Gross vehicle weight: 3,500 kg; payload (complete vehicle with crane and flatbed): approx. 600 kg - Manual transmission - Limited-slip differential - 2 x 100 Ah batteries - Trailer coupling (ball head) 3,500 kg with factory-installed electrical kit - Heated exterior mirrors - Automatic climate control - Radio pre-wiring - Reversing warning system - PTO with increased RPM - Battery and AdBlue tank covers - Pre-wiring for battery isolation relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Inner dimensions: 2,720 mm x 1,820 mm x 400 mm - 18 mm floor plate - Floor frame with airline rails around the perimeter - Airline rail also in front wall Lajdpfsywzygjx Al Ijb - Sidewalls: anodized aluminum with folding step, easily removable - Tool/storage box - Work lights - Other flatbed dimensions available upon request Loading crane: with 3x hydraulic extensions (Country of manufacture: Italy) - Max. lifting capacity according to manufacturer: 995 kg; 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - CE-compliant version (EN 12999) - Slewing range: 370° (slewing range limitation: 190°) - All hydraulic cylinders double-acting - Hard chrome-plated piston rods - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted at crane base - Outriggers extendable on both sides, special outriggers, support width 3.10 m - Hydraulic support rotatable 30° and 180°, CE, incl. M.O.L. - Load hook and mounting brackets - 12V onboard power supply - Electronic modules for Danfoss S800 control block, 4 functions - Danfoss S800 control block, 5 functions incl. high-pressure filter - Special outriggers, support width 3.10 m (1 pc) - Extra charge for shortened support legs (by 80 mm) - Mechanical jib extension “N” – 1.3 m stroke (7.0 kg) - Stainless steel bolts and hose clamps - Dinitrol cavity protection - Zinc primer - Switch for work lights mounted at control block from factory - LED work light at articulated arm, factory-mounted - LED for 2 support legs - Options: reversing camera with CarPlay, spade holder, 90° cable, ladder rack/transport frame for front or rear wall, additional tool box available Errors and prior sale excepted. ... Air conditioning, climatronic, VAT deductible, ASR, ABS, onboard computer, electric windows (front), electronic immobiliser, central locking with remote, trailer coupling, power steering, limited slip differential, spare wheel, twin tires, driver's cab: short distance, electric windows, work lights, crane, new vehicle, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/city/highway), particulate filter, available for rental, fine dust sticker: 4 (green), reversing camera.