Cronosstech C Tip 150 Ton Eksentrična Stiskalnica nakup rabljenega (75.314)

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 160 t, širina mize: 920 mm, dolžina mize: 660 mm, globina grla: 320 mm, prebijalna sila: 160 t, vrtina cilindra: 55 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) Dkodpfxsvtywde Ab Hon - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Areas of Application - Cold punching and cutting operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-point slide guiding • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain finger-hand safety system • PLC control system • Dual hand/foot pedal operation system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Complies with CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster table • Decoiler, feeder, and straightener • One set of dies per requested specifications • 8-point slide guiding ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table-ram distance: 500 mm Slide-table clearance: 540 mm Distance between side frames: 500 mm Ram adjustment: 120 mm Approx. press width: 1,600 mm Approx. press depth: 2,280 mm Approx. press height: 2,750 mm Front anchor dimension: 840 mm Side anchor dimension: 1,300 mm Table hole diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1,450 rpm Approx. weight: 7,100 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2026, moč: 18,5 kW (25,15 KM), stiskalna sila: 150 t, hod: 700 mm, širina mize: 700 mm, dolžina mize: 1.000 mm, globina grla: 350 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, 150 Ton C-Type Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly processes. The CHCP 150 C-Type Hydraulic Press, manufactured by CRONOSSTECH, has been developed for heavy-duty and continuous production applications, featuring a high tonnage capacity, reinforced frame construction, and precise operating performance. Key Advantages - High-strength, vibration-free steel construction frame - High precision (≤120 micron/metre) - PLC controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Design suitable for heavy-duty applications - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and metal spinning operations - Pressing applications with dies - Cutting and punching operations - Automotive and sub-industry Standard Features - Steel construction frame stress-relieved by vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in compliance with ISO & DIN standards (≤120 micron/metre) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 150 Pressing Force: 150 Ton Stroke: 700 mm Throat Depth: 350 mm Table – Ram Distance: 800 mm Table Dimensions: 700 x 1000 mm Press Depth: 1400 mm Press Width: 700 mm Table Height from Floor: 950 mm Total Height: 2800 mm Main Cylinder Diameter: Ø250 mm Motor Power: 18.5 kW Weight: 10500 kg General Information Dkjdsyzb D Hepfx Ab Hon Place of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 500 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial-grade presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing operations. Thanks to its 8-guide H-frame construction, the press delivers stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed for medium-capacity applications, aiming for reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial environments. The frame and load-bearing components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth load transfer and long-term stable performance. ⚙️ Standard Equipment: • Steel construction, H-type press body with 8 slide guides • Stress-relieved frame and load-bearing parts (vibration treated) • Bronze Zr14 slide bushings • WPQR & WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Machine frame designed and manufactured according to CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • Monitoring of hydraulic oil temperature and system status on screen • Cooling system • Off-line filtration • Two-hand control system • Light curtain (standard operator safety) • SIEMENS and SCHNEIDER electrical switchgear 📐 Technical Specifications – CHP 150 • Type: Steel construction, 8-guide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bushing: Bronze Zr14 • Capacity (Ram): 150 Tons • Movable Table Dimensions: 800 × 1000 mm • Fixed Table Dimensions: 800 × 1000 mm • Parallelism Tolerance: 120 micron/meter • Squareness Tolerance: 60 micron/meter • Stroke (Ram): 500 mm • Minimum Daylight: 100 mm • Maximum Daylight: 600 mm • Weld Stress Relief: Vibration treated • Welding: WPQR & WPS approved, TÜRK-AK accredited, complies with EN ISO 15614-1:2017 supervised by certified welding coordination engineers (EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 18.5 kW – IE3 • Main Pump: 32 cm³ – REXROTH or PARKER • Movable Table Fast Descent Speed: 150 mm/sec • Movable Table Pressing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø280 mm – Ck45 • Approx. Height: 3650 mm • Approx. Width: 2950 mm • Approx. Depth: 2000 mm • Lower Table Height from Floor: 1250 mm • Pre-fill Valve: NG 100 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Distance Encoder: NOVATECHNIK or TURCK • PLC: DELTA • Touch Panel: DELTA 7” • Switchgear: SIEMENS – SCHNEIDER Djdpjx N T Dzsfx Ab Hjkn • Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 80 t, širina mize: 660 mm, dolžina mize: 860 mm, prebijalna sila: 80 t, prebojna odprtina v mizi: 180 mm, nastavitev hoda: 110 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guideways • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standard compliant Dedjvtx H Rjpfx Ab Hjkn ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set manufactured to requested specifications • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Tons Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed distance: 420 mm Distance between uprights: 400 mm Ram adjustment: 85 mm Approximate width: 1400 mm Approximate depth: 1735 mm Approximate height: 2220 mm Front anchorage size: 670 mm Side anchorage size: 1040 mm Bolster hole diameter: Ø190 mm Bolster dimensions: 540×740 mm Die fixing hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Should you require changes to technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.100 mm, prebijalna sila: 200 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 60 mm, nastavitev hoda: 180 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready use with PLC control and dual hand/foot controls Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-surface slide guides • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Central, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-solenoid safety valve • Manually adjustable stroke • Light curtain hand–finger safety system Dodpfx Abevtyx Is Hjkn • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor movement • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Decoiler, feeder, and straightener • One set of tooling/custom die as requested • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Bed–ram distance: 500 mm Slide–bed distance: 600 mm Distance between uprights: 510 mm Ram adjustment (shut height): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchor distance: 920 mm Side anchor distance: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping slot diameter: Ø60 mm Ram size: 620×350 mm Floor to bed height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: If you require any changes to the technical specifications, please let us know. ✅ MANUFACTURING / SUPPLY NOTE: This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), stiskalna sila: 250 t, hod: 160 mm, širina mize: 700 mm, dolžina mize: 1.100 mm, globina grla: 350 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, The eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure make it a reliable performer suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control and dual-hand/foot operation Applications - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES - Steel construction body - Four-sided guided slide - Nodular cast iron connecting rod and gear housings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully-automatic grease lubrication - Pneumatic clutch and brake combination - Compliance with CE safety directives - Double-coil safety valve - Manually adjustable stroke - Finger-hand protection safety system with light curtain - PLC control system - Dual-hand/foot control system - Mechanical safety system - Emergency reverse motor operation - Complies with occupational health and safety regulations - Conforms to CE standards ✅ OPTIONAL FEATURES - Vibration isolation mounts - Touch LCD screen (standard for 150–300 ton models) - Hydraulic safety system (standard for 200–300 ton models) - Spare bolster plate - Coil feeder, straightener, and uncoiler - One set of dies according to requested specifications - Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (250 TON) - Capacity: 250 tons - Throat depth: 350 mm - Table–ram distance: 520 mm - Slide–table distance: 630 mm - Distance between side frames: 520 mm - Ram adjustment (regulation): 150 mm - Approx. press width: 2000 mm - Approx. press depth: 2500 mm - Approx. press height: 3100 mm - Front anchoring dimension: 930 mm - Side anchoring dimension: 1430 mm - Table hole diameter: Ø250 mm - Table size: 700×1100 mm - Die clamping slot diameter: Ø60 mm - Ram size: 670×380 mm - Table height from floor: 810 mm - Stroke adjustment: 20–160 mm - Strokes per minute: 40 spm - Motor power: 22 + 2.2 kW - Motor speed: 1450 rpm - Approximate weight: 12,000 kg Note: Please inform us if you require modifications in technical specifications. Dsdpjx N Nfbjfx Ab Hjkn ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), stiskalna sila: 300 t, hod: 200 mm, širina mize: 700 mm, dolžina mize: 1.200 mm, globina grla: 370 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Eccentric presses are mechanical press types operated by an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Ready-to-use with PLC control and dual-hand/foot pedal operation Areas of Application Dkjdpfxjx N Nfho Ab Hjn - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-way guide slide • Spheroidal cast connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Designed according to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual-hand/foot pedal operation system • Mechanical safety system • Emergency motor reverse feature • Complies with occupational safety regulations • CE compliance ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch-screen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die according to requirements • 8-way slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Bed–ram distance: 530 mm Ram–table distance: 650 mm Distance between side frames: 470 mm Ram adjustment (shut height adj.): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchor dimension: 940 mm Side anchor dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamping slot diameter: Ø60 mm Ram size: 780×400 mm Floor-to-table height: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 50 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming applications. Thanks to the 8-guided H-frame structure, maximum rigidity is maintained during pressing; parallelism and perpendicularity tolerances are consistently upheld throughout the stroke. The CHSP 150/50 model is specially engineered for precise and repeatable deep drawing operations, with a 150-ton main ram and a 50-ton cushion (die cushion) capacity. The frame construction undergoes stress-relieving via vibration, ensuring reliable and long-lasting performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) Djdpfx Aox N T U Hjb Hokn - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Capacity (Cushion): 50 Ton Movable Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: Vibration stress relieving Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017. (Welding operations are supervised by "welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Cushion Cylinder Internal Diameter: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of the Press: 3650 mm Approx. Width of the Press: 2950 mm Approx. Depth of the Press: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 11 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2026, moč: 15 kW (20,39 KM), stiskalna sila: 80 t, hod: 600 mm, širina mize: 600 mm, dolžina mize: 800 mm, globina grla: 300 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, 80 Tonne C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines delivering high force and precision in metal forming, deep-drawing, cutting, and assembly applications. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance for medium and heavy-duty applications, thanks to its robust frame, high capacity, and precise operational capabilities. Key Advantages - Rigid, vibration-free welded steel construction - High accuracy (≤120 microns per meter) - PLC-controlled user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance costs Application Areas - Metal forming - Deep-drawing and pressing operations - Cutting and punching operations - Assembly and pressing tasks - Automotive and sub-industries Standard Features - Stress-relieved welded steel construction by vibration method - PLC control with touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance according to ISO & DIN standards (≤ 120 microns/metre) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 80 - Pressing Force: 80 Tonnes - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Floor to Table Height: 900 mm - Total Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused Dodpjyzb Dtsfx Ab Hekn This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2026, moč: 15 kW (20,39 KM), stiskalna sila: 100 t, hod: 600 mm, širina mize: 650 mm, dolžina mize: 850 mm, globina grla: 300 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, 100 Ton C-Type Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 100 C-Type Hydraulic Press by CRONOSSTECH is designed for heavy-duty production applications with its high tonnage capacity, robust frame structure, and precise operating capability. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 microns/meter) - User-friendly PLC-controlled system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance costs Areas of Application - Metal forming - Deep drawing and hydraulic forming operations - Cutting and punching operations - Assembly and pressing operations Djdpoyzb Dyjfx Ab Hjkn - Automotive and auxiliary industries Standard Features - Stress-relieved steel frame via vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in line with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 100 Press Force: 100 Ton Stroke: 600 mm Throat Depth: 300 mm Table – Ram Distance: 700 mm Table Size: 650 x 850 mm Press Depth: 1300 mm Press Width: 650 mm Table Height from Floor: 900 mm Overall Height: 2700 mm Main Cylinder Diameter: Ø220 mm Motor Power: 15 kW Weight: 8,500 kg General Information Place of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2026, moč: 7,5 kW (10,20 KM), stiskalna sila: 60 t, hod: 500 mm, širina mize: 600 mm, dolžina mize: 800 mm, globina grla: 250 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, delivers reliable and stable performance in workshops and production lines thanks to its compact structure, robust frame, and precise working capability. Key Advantages - Rigid, vibration-free frame structure - High precision (≤120 microns/meter) - User-friendly PLC-controlled system - European standard hydraulic and electrical components - Long service life and low maintenance costs Areas of Application - Metal forming - Deep drawing and hydroforming - Cutting and punching operations - Assembly and pressing - Automotive and related industries Standard Features - Stress-relieved welded steel construction by vibration method - PLC control and touchscreen panel - Argon welding applications - Certified welding per EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerances meeting ISO & DIN standards (≤120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 60 - Press Force: 60 Tons - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 600 x 800 mm - Press Depth: 1150 mm - Press Width: 500 mm Dkjdpeyzb Dmofx Ab Hon - Table Height from Floor: 850 mm - Total Height: 2500 mm - Main Cylinder Diameter: Ø175 mm - Motor Power: 7.5 kW - Weight: 5500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 7 A, stiskalna sila: 150 t, hod: 300 mm, Oprema: CE označba, dokumentacija / priročnik, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH FAST APPROACH CAPACITY: 150 TON Monolithic frame, entirely laser-cut and bolted in a pack. This feature ensures that all our presses remain deformation-resistant, even at the points of greatest stress. Dksdoy E Rr Iopfx Ab Hon All components are manufactured in Italy. Hydraulic power unit with submerged ICME motor, 400 V, 50/60 Hz. Cylinders and frames manufactured in Italy. Monoblock GALTECH distributor. No. 2 unidirectional external gear pumps in aluminium by VIVOIL: one for fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel for setting required power. Maximum pressure valve with mechanical lock to prevent overpressure. High-end 2-way CETOP MP valve block. Standard pressure gauge to display delivered power. INTECH electrical panel certified according to current regulations and with independent CE marking. Maximum Capacity: 150 TON Approach Speed (fast): 1450 mm/min Working Speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shank diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1300 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, ELEKTRO-HIDRAVLIČNA STISKALNICA Z PREMIČNIM BATOM AXA. Moč: 150 ton. Avtomatska dvojna hitrost z načinom "rapid". Posebna električna nadzorna omarica s preklopnikom hitrega/počasnega načina za enoročno upravljanje. Premični valj, prečni hod 816 mm. Notranja širina med stojali: 1500 mm. Hod bata: 300 mm. Št. 01 ELEKTRO-HIDRAVLIČNA STISKALNICA AXA PM150/15 S PREMIČNIM BATOM – NOVO, "CE". - AVTOMATSKA DVOJNA HITROST Z RAPIDOM. - POPOLNA OPREMA S POSEBNO ELEKTRIČNO NADZORNO OMARICO ZA PREKLOPNIK RAPID/POČASEN ZA ENOROČNO UPRAVLJANJE. - TEHNIČNI LIST PRILOŽEN. - Izhodna moč: 150 ton - Hod valja: 300 mm - Notranja širina: 1504 mm - Hitrost približevanja (rapid): 1450 mm/min - Delovna hitrost (počasno): 105 mm/min - Hod bata valja: 300 mm - Premer bata valja: 110 mm Dkedpfjlruhdsx Ab Hen - Premer navoja priključka: M30 mm - Kapaciteta rezervoarja: 50 litrov - Največji tlak: 350 bar - Napetost: 400 V, frekvenca 50–60 Hz - Moč motorja: 3 kW - Največji tok: 7,3 A - Teža: 1500 kg Distributerji GALTECH. • Blok 2MP. • 2 enosmerni zobniški črpalki VIVOIL. Ena za hitro približevanje in vračanje (nastavljena na 20 bar) ter ena z nastavljivim tlakom preko ročnega volana za nastavitev zahtevane moči. • Varnostni ventil z mehanskim blokom proti previsokemu tlaku. • Serijski manometer za prikaz izhodne moči. • Električna nadzorna omarica INTECH, certificirana po veljavnih predpisih z lastno CE oznako.

Stanje: rabljeno, Leto izdelave: 1980, Na prodaj je robustna mehanska ekscentrična stiskalnica / preša za prebijanje znamke MGR. Stroj je idealen za prebijanje, oblikovanje in stiskanje kovinskih materialov, prihaja iz industrijske uporabe. Tehnični podatki Proizvajalec: MGR Tip: 45R Leto izdelave: 1980 Tlačna sila: 45.000 kg (45 t) Izvlek: 230 mm Hod bata: 80 mm Nastavljiv bat: 55 mm Nastavljiv hod: 9 – 120 mm Moč motorja: 3,5 KM Dedey Unmbepfx Ab Hskn Napetost: 380 V Št. stroja: 311860

Stanje: rabljeno, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture: approx. 1977 Rated pressing force: 63 t Pressing force: 50 tonnes (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. daylight opening: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 l Drive power: 15 kW Power connection: 380 V, 50 Hz Dkjdpfx Aodzp Trob Hjn - Hydraulic drawing cushion beneath the table with bored holes through the table plate - Two-hand operation - Electrical control cabinet damaged Space requirement (L x W x H): 2000 x 1200 x 3420 mm Weight: approx. 5 t The machine is operational, but the control cabinet is mechanically damaged. During test operation, the machine achieves a pressing force of 50 tonnes; it is presumed that a pressure relief valve is opening.

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save -24% compared to the RRP! TIGERMETAL WH150 – Hydraulic Workshop Press 150 Tons | Electric + Hand Pump The TIGERMETAL workshop press WH150 is a high-performance industrial press for heavy-duty applications in workshops, manufacturing, and maintenance. With a pressing force of 150 tons, this machine is ideal for demanding straightening, pressing, and bending tasks in professional environments. Thanks to the combination of electric drive and manual hand pump, the press allows for both rapid workflows and sensitive, precise pressure control—especially when working with delicate workpieces. 🔧 Technical Data: Model: WH150 Manufacturer: TIGERMETAL Pressing force: 150 tons Drive: Electric motor + hand pump Motor power: approx. 4 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 310 bar Stroke: approx. 400 mm Clear width: approx. 1200 mm Max. working height: approx. 1000 mm Weight: approx. 1080 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications Djdpef Sqckjfx Ab Hekn ✔ Precisely adjustable pressure for accurate work ✔ Laterally movable cylinder ✔ Height-adjustable crossbeam ✔ Robust, durable steel construction ✔ Pressure gauge for monitoring ✔ Safety valve for overload protection ✔ Optional extension with accessories The WH150 is the ideal solution for anyone seeking maximum pressing force with the highest precision, flexibility, and industrial reliability. The laterally movable cylinder and height-adjustable working table ensure maximum flexibility and optimal adaptation to various components. The robust steel frame guarantees maximum stability, safety, and a long service life—even in intensive, continuous industrial operation. Some images show a slightly different version than the one offered here. The model depicted in the photos is additionally equipped with an automatic function. Numerous other workshop presses in different versions, sizes, and with optional extra equipment available! Versions: 30t 60t 100t 150t 200t ᐳ200t: upon request Custom machines: upon request Brand new machine! We are also able to build custom presses tailored to your requirements. A demonstration machine can be tested under power on site by arrangement. ----- Simply contact us—we are happy to provide you with advice and assistance, with no obligation. ----- The stated price is net plus 19% VAT. All information subject to change! Europe-wide delivery possible! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, messaging portal), during which we will first send you a non-binding offer and also provide you with our general terms and conditions and information about the right of withdrawal and our legal notice before a purchase/contract is concluded.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.200 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety in large bolster and heavy die applications, thanks to their rigid frame designs. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is engineered for stable performance in high-volume production, with a focus on die protection and operator safety. With its monoblock frame, 8-point ram guidance system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable operation under continuous production conditions. Highlighted Advantages - Stable operation for large dies with a 2200×1200 mm bolster - Die/equipment protection with hydraulic overload safety system - Precision guidance through 8-point guided ram and balancer piston - Controlled, user-friendly operation via PLC and touchscreen - Advanced operator safety with light curtain protection system Areas of Application - Punching, cutting, and forming operations requiring large bolsters - Mass production integrated with automatic feeding lines - Heavy-duty die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-point ram guidance • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system Dkedpfxox N R Ahj Ab Hen • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse rotation motor • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety guard • Enclosed gear group in oil bath • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard for bolster front • Custom dies per requirements ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 500 H-Frame Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures balanced load distribution during pressing, providing stable and repeatable operation. The CHP 500 model is specifically designed for long-term, reliable performance in heavy-duty production processes that require high tonnage. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty service in mind. The frame and carrier components are stress-relieved by vibration. The Zr14 bronze slide bearings ensure uniform load distribution and long-term precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components via vibration - Zr14 bronze slide bearings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on display Dkodpfx Aox N T H Ajb Hen - Cooling system - Offline filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guide H-frame press type - Frame Material: St52 – ERDEMIR - Slide Bearings: Zr14 bronze - Capacity (Ram): 500 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5800 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Offline Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 150 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHSP 400/150 model, featuring a 400-ton main ram and 150-ton blank-holder (pot) capacity, is designed for deep drawing and spinning applications requiring high tonnage. The machine frame is stress-relieved using vibration methods, ensuring long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body type - Stress-relieved frame by vibration - Bronze Zr14 slide bushings - Welds certified by TÜRK-AK accredited WPQR and WPS processes (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 400 tons - Capacity (Pot): 150 tons - Moving Table Size: 1200 × 1500 mm Dsdpfx Ajx N Uhhsb Hskn - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Stroke (Pot): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures supervised by "welding coordination engineers" certified to EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Spinning Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Pot Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø450 mm – Ck45 - Pot Cylinder Bore: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5600 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 24 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 200 t, hod: 60 mm, širina mize: 400 mm, dolžina mize: 4.200 mm, nastavitev hoda: 60 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Kapı, pencere aksesuarları sektörü için ürettiğimiz çiftli ve tekli çalışma özelliğine sahip bu preslerimiz ve besleme hatları maksimum verimlilikte uzun yıllar boyunca çalışmayı garanti eder. Yüksek adetli üretimin kaçınılmaz olduğu pencere aksesuarları sektöründe preslerimiz ve bununla beraber getireceğimiz tecrübemiz ile maksimum müşteri memnuniyeti sağlanır. -400 tona kadar baskı gücü -6000 mm'ye kadar tabla boyu -2 ve 3 biyel kolu seçeneği -Otomatik sürekli geri dönüşlü ince yağlama -Prograsif yağlama bloğu kullanımı -Arka ve önden prese ulaşılabilir olması -Manyetik sensörlü kayar kapaklar -İndüksiyon ile sertleştirilmiş ve taşlanmış dişliler -Konik kilit ile yapılan dişli-göbek geçmeleri BASIN : 200 TON DEVİR : 40-70 DEV/DAK STROK : 60 MM MASİMUM KALIP YÜKSEKLİĞİ : 340MM MASA-KOÇ YÜKSEKLİĞİ : 400MM REGLAJ AYARI : 100MM ÜST TABLA ÖLÇÜSÜ : 400X3000MM ALT TABLA ÖLÇÜSÜ : 400X4200MM MOTOR : 18,5 KW Dkjdpfxsxrbmyj Ab Hon MOTOR DEVRİ : 3000 DEV/DAK

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 200 H-Frame Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium to high tonnage, offering reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth ram movement and long-term precision. Dedpfjx N T D Usx Ab Hekn ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibratory stress-relieved frame and load-bearing components - Bronze Zr14 slide bearings - WPQR & WPS certified weld applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7") - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: Vibration stress relief Weld Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 3800 mm Approximate Width: 2950 mm Approximate Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 130 t, širina mize: 750 mm, dolžina mize: 1.000 mm, prebijalna sila: 130 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 55 mm, nastavitev hoda: 140 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for series production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance due to centralized automatic lubrication • Production-ready use with PLC control + dual hand/foot control Application Areas • Cold cutting and punching operations • Cold breaking applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel frame body • Four-face guided slideways • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection safety system with light curtain • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliance with occupational safety regulations • CE standard conformity ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of dies manufactured to customer requirements • Eight-way slide guiding ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 tons Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Distance between uprights: 450 mm Ram adjustment (regulation): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring size: 790 mm Side anchoring size: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Ram size: 500×250 mm Dkedovtyvgopfx Ab Hjn Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 200 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, trajanje garancije: 24 meseci, Eccentric presses are a type of mechanical press driven by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frame construction. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is engineered with a focus on stable operation in high-volume production, die protection, and operator safety. Its monoblock frame, 8-gib guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production environments. Key Advantages - Stable performance with large dies due to a 1200×1000 mm table size - Die and tooling protection with hydraulic overload safety - Controlled and user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain protection - Low maintenance need with automatic lubrication system Applications - Punching / cutting / die forming operations - Series production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch & brake • Additional bolted T-slotted plate • 8-gib guided ram • Adjustable stroke on single connecting rod • Balancer piston in ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • LCD touchscreen • Motor reverse movement • Hydraulic overload protection • Motorized ram adjustment • Light curtain safety guard • Enclosed gear set in oil sump • Double-solenoid safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feed systems Djdpfxex N Sccs Ab Hekn • Scrap ejection systems • Sliding safety cover in front of table • Custom dies to specification ✅ TECHNICAL DATA (CEHP-TB-200) Capacity: 200 Ton Table–Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Dimension: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 800 mm, razmak između stupova: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 150/50 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 150/50 ton four-post hydraulic deep drawing press is an industrial solution designed for metal forming, deep drawing, and precision pressing applications. It features a robust four-post rigid frame structure for enhanced stability and precision. Its St52-grade steel frame undergoes stress relief via vibration technology to maintain high parallelism and perpendicularity tolerances over extended operations. Ram and cushion systems operate independently, with precise stroke and pressure adjustments managed via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motors and PLC-based control, the press provides high efficiency, reliability, and long service life. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With a 150/50 ton capacity, this model is ideal for mass production, die test runs, and medium to high tonnage deep drawing operations. Key Advantages - Rigid four-post frame structure - Independent stroke and tonnage adjustment for ram and cushion - Complete control via touchscreen interface - High accuracy and repeatability - Low maintenance costs and long operational life Applications - Metal forming operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened and chrome-plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 Ton CAPACITY (CUSHION): 50 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 600 mm CUSHION STROKE: 200 mm MIN. DIE OPENING HEIGHT: 100 mm MAX. DIE OPENING HEIGHT: 700 mm WELDING STRESS RELIEF: Vibration method WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/s MOVABLE TABLE DRAWING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s Dodpfx Asx N Ul Tob Hekn CUSHION ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 CUSHION CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. MACHINE HEIGHT: 3800 mm APPROX. MACHINE WIDTH: 1150 mm APPROX. MACHINE DEPTH: 1150 mm BED HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from the panel) RAM/CUSHION STROKE & TONNAGE SETTINGS: Adjustable via panel SYSTEM & PRESS STATUS MONITORING: Accessible via the touch panel DIE MEMORY: Adjustable via the panel LINEAR SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, moč: 7,5 kW (10,20 KM), stiskalna sila: 100 t, širina mize: 670 mm, dolžina mize: 950 mm, prebijalna sila: 100 t, prebojna odprtina v mizi: 180 mm, vrtina cilindra: 45 mm, nastavitev hoda: 120 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Presses are mechanical press machines that operate with force generated via an eccentric mechanism, designed for cold forming operations such as punching, cutting, and shaping with dies. Thanks to their high production speed and repeatability, they are efficient and reliable solutions for mass production lines. CRONOSSTECH C-Type Eccentric Press 100 Ton is designed for stable performance in cold forming applications. Featuring a rigid steel frame construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers dependable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance need with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slideway guides • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts from 4140 tempered steel • Central full automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor movement • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster • Decoiler, feeder, and straightener • One set of dies according to customer specs • 8-sided slideway guides ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Dkjdpjvtx Insfx Ab Hjn Distance between uprights: 420 mm Ram adjustment (shut height): 85 mm Approx. machine width: 1400 mm Approx. machine depth: 1900 mm Approx. machine height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Stroke per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.