Elektrohidravlična stiskalnica 150 ton
AXA PM 150/15

Leto izdelave

2026

Stanje

Novo (popolnoma funkcionalen)

Lokacija

Concordia Sagittaria Italija

Elektrohidravlična stiskalnica 150 ton AXA PM 150/15

Prikaži karto

Podatki o stroju

Oznaka stroja:: Elektrohidravlična stiskalnica 150 ton

Proizvajalec:: AXA

Model:: PM 150/15

Leto izdelave:: 2026

Stanje:: novo

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Via Levada, 72, 30023 Concordia Sagittaria VE, Italia

Pokliči

Tehnične podrobnosti

Vhodna napetost:: 400 V

Podrobnosti ponudbe

ID oglasa:: A9912515

Posodobitev:: nazadnje dne 28.04.2026

Opis

ELEKTRO-HIDRAVLIČNA STISKALNICA Z PREMIČNIM BATOM AXA.
Moč: 150 ton.
Avtomatska dvojna hitrost z načinom "rapid".
Posebna električna nadzorna omarica s preklopnikom hitrega/počasnega načina za enoročno upravljanje.
Premični valj, prečni hod 816 mm.
Notranja širina med stojali: 1500 mm.
Hod bata: 300 mm.
Št. 01 ELEKTRO-HIDRAVLIČNA STISKALNICA AXA PM150/15 S PREMIČNIM BATOM – NOVO, "CE".
- AVTOMATSKA DVOJNA HITROST Z RAPIDOM.
- POPOLNA OPREMA S POSEBNO ELEKTRIČNO NADZORNO OMARICO ZA PREKLOPNIK RAPID/POČASEN ZA ENOROČNO UPRAVLJANJE.

- TEHNIČNI LIST PRILOŽEN.

- Izhodna moč: 150 ton
- Hod valja: 300 mm
- Notranja širina: 1504 mm
- Hitrost približevanja (rapid): 1450 mm/min
- Delovna hitrost (počasno): 105 mm/min
- Hod bata valja: 300 mm
- Premer bata valja: 110 mm
- Premer navoja priključka: M30 mm
- Kapaciteta rezervoarja: 50 litrov
- Največji tlak: 350 bar
- Napetost: 400 V, frekvenca 50–60 Hz
- Moč motorja: 3 kW
- Največji tok: 7,3 A
- Teža: 1500 kg

Distributerji GALTECH.
Hsdpjlruhdefx Agxol
• Blok 2MP.
• 2 enosmerni zobniški črpalki VIVOIL. Ena za hitro približevanje in vračanje (nastavljena na 20 bar) ter ena z nastavljivim tlakom preko ročnega volana za nastavitev zahtevane moči.
• Varnostni ventil z mehanskim blokom proti previsokemu tlaku.
• Serijski manometer za prikaz izhodne moči.
• Električna nadzorna omarica INTECH, certificirana po veljavnih predpisih z lastno CE oznako.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2016

95 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+39 0421 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Batni kompresor Honda bencinski motor RENNER REKO 550/50VE

Erlangen

486 km

Batni kompresor Honda bencinski motor
RENNERREKO 550/50VE

1.600 €

Fiksna cena plus DDV

Pokliči

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine For use without a power supply (e.g. breakdown service vehicles or mobile tyre service) The compressor is used, built in 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you not only the usual advantages of RENNER systems but also, above all, flexibly available compressed air on construction sites, in service vehicles, and for many other applications "without a power socket". They guarantee a reliable compressed air supply independent of location. The small version is mobile and can be repositioned quickly thanks to the ergonomic handle, while the larger variant, with its compact design, can easily be moved with a pallet truck or forklift and loaded onto vehicles. VE = Electric Start. Please note: supplied without battery. Technical data: Intake capacity: 550 l/min Effective output: 400 l/min Petrol engine: 3.6 kW Honda unit with 4.8 HP Max. pressure: 10 bar Cylinders/stages: 2/1 Speed: 1,400 rpm Sound level: 98 dB(A) Air receiver: 50 l Dimensions (L x W x H): 810 x 460 x 830 mm Hsdped H Dr Sefx Agxel Weight: 70 kg Visit our store in Erlangen. We have a large selection of new and used compressors.

Poglej podrobnosti

Mali oglas

Odmikalo za tovor v pisarni Zambelli Zambelli Ersatzteile Office Cargo Spacer

Nauen

728 km

Odmikalo za tovor v pisarni Zambelli
Zambelli ErsatzteileOffice Cargo Spacer

Pokliči

Stanje: novo, The manufacturer Zambelli Metalltechnik GmbH & Co. KG will discontinue support for all paternoster and storage lifts as of 31 December 2023. After this date, the company will no longer provide support or spare parts. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these units. Please feel free to contact us at any time. Hsdpfjiy Dw Hjx Agxjl

Poglej podrobnosti

Mali oglas

Horizontalna tračna žaga Bernardo HBS 275 - 400 V

Mudersbach

735 km

Horizontalna tračna žaga
BernardoHBS 275 - 400 V

2.150 €

VB plus DDV

Pokliči

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder Hodpfod Du T Ijx Agxol • Motor protection switch • Automatic shut-off

Poglej podrobnosti

Mali oglas

Avtomatski stroj za žaganje traku Kasto KASTOtec A/AC/AM5

Nemčija

650 km

Avtomatski stroj za žaganje traku
KastoKASTOtec A/AC/AM5

Pokliči

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic Kasto band saw system is available. Cutting range at 90°: Round material: 530mm, Square material: 530mm x 530mm, Flat material: 530mm x 640mm. Saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions (X/Y): approx. 18,000mm x 4,000mm. Weight: approx. 6,000kg. Includes roller conveyors. Documentation is available. On-site inspection is possible. Hjdpfx Aov S E Edjgxjl

Poglej podrobnosti

Mali oglas

Sredinski stružnica in stružnica za vreteno Metallexport TUD 50-2000

Nemčija

614 km

Sredinski stružnica in stružnica za vreteno
MetallexportTUD 50-2000

Pokliči

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Hsdpfsu Ix Dcex Agxsl Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers various gears

Poglej podrobnosti

Mali oglas

Žerjav nadstrešek Žerjav Notranji žerjav Žerjavska steza Demag - Portalkran KBK 125KG Kettenzug KBK 1 KBK1 12x3,5m NL 125Kg + Zubehör

Gondelsheim

576 km

Žerjav nadstrešek Žerjav Notranji žerjav Žerjavska steza
Demag - Portalkran KBK 125KG KettenzugKBK 1 KBK1 12x3,5m NL 125Kg + Zubehör

2.150 €

VB plus DDV

Pokliči

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: Hsdpjpiarnefx Agxel KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Poglej podrobnosti

Mali oglas

Siedlce

853 km

Krožna namizna žaga
CORMAKTS250C 400V

729 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2026, Circular saw with table, right-hand table extension, and straight and angular fence. This machine incorporates many features typically found in more expensive devices of this type. An excellent price-to-performance ratio has been achieved without compromising on quality or versatility. Machine description: This innovative circular saw combines power, precision, versatility, and compact dimensions. Designed for small woodworking shops, furniture manufacturers, and craftsmen. The machine uses solutions usually reserved for higher-end models, ensuring remarkable efficiency without sacrificing quality or universality. Supplied with a 250 x 30 x 2 mm carbide-tipped saw blade. MAXIMUM BLADE/BORE DIAMETER: 254x30 mm BLADE SPEED: 4,000 rpm BLADE TILT RANGE: 90–45° MAX. CUTTING DEPTH AT 45º: 65 mm MAX. CUTTING DEPTH AT 90º: 80 mm Hsdpfx Aevxhi Eogxel CUTTING WIDTH WITH TABLE EXTENSION: 750 mm MAXIMUM CUTTING LENGTH: 1,000 mm EXTRACTION PORTS: 100/25 mm TABLE DIMENSIONS: 635 x 420 mm TABLE DIMENSIONS WITH EXTENSION: 635 x 1500 mm MOTOR POWER: 2.2 kW (S1) 400V / 3.1 kW (S6) WEIGHT: 110 kg DIMENSIONS: 1450 x 1000 x 1100 mm Manufacturer: Cormak

Poglej podrobnosti

Mali oglas

Električni transformator Entreprise Redonnaise d’Electricité N84-820

Russy-Bémont

964 km

Električni transformator
Entreprise Redonnaise d’ElectricitéN84-820

1 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Hidravlične stiskalnice PROFI PRESS 60T M/H-M/C-2 2025 PROFI PRESS 60T M/H-M/C-2

Wijchen

922 km

Hidravlične stiskalnice PROFI PRESS 60T M/H-M/C-2 2025
PROFI PRESS60T M/H-M/C-2

Pokliči

Stanje: rabljeno, Leto izdelave: 2025, skupna dolžina: 1.100 mm, skupna širina: 800 mm, skupna višina: 2.200 mm, Poids à vide : 540 kg Prix : Sur demande Cylindre de presse mobile - Année de fabrication : 2025 - Documentation disponible : Oui Hedpew N St Hjfx Agxel - Marquage CE : Oui - Certificat CE : Oui - Heures de fonctionnement : 0 - Commande : Conventionnelle - Modèle de presse : Presse à bâti en C - Force de pression [tonnes] : 60 - Course maximale [mm] : 380 - Longueur de la table [mm] : 1000 - Largeur de la table [mm] : 260 - Longueur du coulisseau [mm] : 100 - Profondeur de col de cygne [mm] : 750 - Réglage en hauteur [mm] : 750 - Puissance moteur : 2,2 kW - Dimensions de transport : 1100mm x 800mm x 2200mm (L x l x h) - Poids de transport [kg] : 540kg - Nombre de colis de transport : 1 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/Taxe sur la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout matériel industriel Lukas van Rossum

Poglej podrobnosti

Mali oglas

Dvostolpna stiskalnica - hidravlična SICMI KP 100

Schmölln

563 km

Dvostolpna stiskalnica - hidravlična
SICMIKP 100

Pokliči

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Stroke: 500 mm Table surface: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Hedpfxevprv Rs Agxsl Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Required space: approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is the Italian make SICMI, which was distributed by Knuth.

Poglej podrobnosti

Oglašujte tukaj