Compactsystem Martina 55 nakup rabljenega (6.495)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. Iodpfx Ahevz Hq Hs Ustn A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. Iodpfx Ajvz Hqmoh Uetn These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. Iodpfx Ajvz Hqtjh Uetn The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm Ijdpfx Ahjvz Hq To Uetn - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h Itjdpfevz Hhxjx Ah Uon - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. Iodjvz Hqyopfx Ah Ustn All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Iedovz Hqgopfx Ah Uotn Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: rabljeno, Leto izdelave: 2020, Nazivna moč: 29,8 kW Pretok zraka: 2400 m³/h Globina kurišča: 580 mm Dimenzije vrat za vstavljanje goriva: 330 mm x 330 mm Prostor za ogrevanje: pribl. 600 m³ Površina za ogrevanje: pribl. 120 m² Potrebna površina: pribl. 600 mm x 800 mm x 1900 mm Teža: 230 kg Ijdpfjz A Eapex Ah Ustn Premer dimnika: 160 mm Izstop za toplo zračno cev: 2 x 200 mm Načini delovanja: avtomatski in ročni Premer dimnika (orientacijska vrednost): 200 mm

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodni tok: 11 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 55 t, Kombinirana strojna oprema Durma IW 55 (stroj za prebijanje in striženje) Prodaja se kombinirana strojna oprema Durma IW 55 (stroj za prebijanje + strižni stroj tipa "ironworker"), zmogljivosti 55 ton. Dobro vzdrževana, v celoti operativna, na voljo za pregled v naših prostorih v Zaragozi, Španija. Proizvajalec: Durmazlar (Turčija) Tip: IW 55/110 Motor: 5,5 kW, trifazni, 50 Hz Delovna napetost: 400 V – Nadzorna napetost: 24 V Intenzivnost: 11,5 A – Varovalka: 16 A Zmogljivosti rezanja: L-profil pri 90° 120x120x10 mm, L-profil pri 45° 70x70x7 mm, plošča 300x15 mm, okrogli profil Ø40 mm, kvadratni profil 40 mm, prebijanje Ø40x10 mm Zmogljivost materiala: do 45 kg/mm² (65.000 psi) Ijdjz Hla Djpfx Ah Uotn Vključuje orodje za prebijanje in matriko Za tehnična vprašanja ali dogovor o obisku nas kontaktirajte po e-pošti. Cena: 6.500 € (možnost dogovora), DDV ni vključen. Če imate kakršna koli vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2018, skupna širina: 1.899 mm, skupna višina: 2.264 mm, skupna dolžina: 2.580 mm, delovna širina: 1.350 mm, širina brušenja: 1.370 mm, skupna masa: 1.890 kg, višina mize: 900 mm, Širokopasovna brusilna naprava Proizvajalec: SCM GROUP spa Znamka: Casadei Tip: Libra 55 RTC 135 Letnik proizvodnje: 2018 Teža: 1.890 kg Tehnični podatki: Maksimalna širina obdelave: 1.350 mm Višina obdelave (gibljiva miza): 4 do 170 mm Višina obdelave (opcijsko fiksna miza): 4 do 200 mm Širina brusilnega traku: 1.370 mm Dolžina brusilnega traku: 2.620 mm Ijdpfx Ahez Ippxj Ustn Hitrost podajanja: 3 stopnje: 4,5 in 9 m/min Moč podajnega motorja: 0,45 / 0,8 kW Moč glavnega motorja: 11 kW (15 KM) Cena: 30.000 € neto, zraven se obračuna zakonito veljaven DDV. Davek na dodano vrednost je na našem računu naveden ločeno. Opomba: Opis opreme ali seznam opreme je prevzet iz prvotnega nakupnega računa in ni bil preverjen glede pravilnosti ali popolnosti. Možne so odstopanja! Možnost financiranja Po želji lahko preko našega podjetja poskrbimo za ustrezno financiranje. Prosimo, kontaktirajte nas. Pridržujemo si pravico do sprememb, napak in prodaje predhodno.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 380 V, Rabljen stroj za obdelavo testenin Dominioni Punto & Pasta P 55, izdelan leta 2002. Proizvajalec: DOMINIONI PUNTO & PASTA SAS Itjdpfx Ahozzmg Re Ujn Model: P 55 Serijska številka: 662 Letnik izdelave: 2002 Napetost: 380 V Moč: 3 kW Stanje: Rabljeno Stroj je v dobrem delovnem stanju in je primeren za profesionalno proizvodnjo testenin. Za dodatne informacije, slike ali videoposnetke nas prosimo kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: AII 477031, skupna masa: 1.500 kg, skupna dolžina: 2.000 mm, skupna širina: 980 mm, skupna višina: 2.000 mm, volumenski pretok: 522 m³/h, tlak (maks.): 10 letvica, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Naprava je bila odstranjena iz obstoječe instalacije. Ni mogoče jo preizkusiti; pripravljena je za prevzem. Kompresor je deloval do trenutka odstranitve, vendar bodo verjetno potrebna popravila, da bi ga spet spravili v delovno stanje in povrnili njegovo polno funkcionalnost. Itodpfx Ahe Aayw Rj Usn

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, ERSA VERSAFLOW 4/55 2Modul S021B-23A0548D rabljeno 2023 cena: 190.000 € (transportni trak ni vključen) Itjdpfex Tgvlsx Ah Uon Specifikacije na zahtevo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Smec, rotacijski razpršilec, nerabljen, model BMT 55. Ijdpfx Ahszw Uz Is Ustn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.605 mm, skupna širina: 3.135 mm, skupna dolžina: 3.055 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, skupna masa: 1.050 kg, obremenitev mize: 200 kg, okoljska temperatura (maks.): 22 °C, temperatura okolja (min.): 18 °C, največja dovoljena obremenitev: 200 kg, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Ta koordinatni merilni stroj WENZEL SF 55 je sodobna in izjemno natančna rešitev za dimenzijsko kontrolo mehanskih komponent. Izdelan je bil leta 2021 in je opremljen z merilno glavo Renishaw PH20 s 5 osmi, programsko opremo WM Quartis in sistemom za kompenzacijo temperature, kar zagotavlja visoko zmogljivost pri testiranju in kontroli kakovosti. Glavne značilnosti: * Leto izdelave: 2021 Iedpfxozrtm Ss Ah Ujtn * Obseg merjenja: 500 × 500 × 500 mm * Merilna negotovost MPEE: 1,8 + L/350 µm * Merilna glava Renishaw PH20 s 5 osmi in tehnologijo Head Touch * Programska oprema za merjenje WM Quartis * Sistem za kompenzacijo temperature * Nadzorna enota WPC 2040 * Popolna podpora za monitor, tipkovnico in miško * Referenčna krogla, vključena Oprema: - Popoln in takoj uporaben merilni sistem - Nadzorna plošča HT400 (RC) - Enota za vzdrževanje stisnjenega zraka - Navodila za uporabo, vzdrževanje in delovanje - CE izjava o skladnosti Otto Machine Že več kot 30 let podjetje Otto Machine izbira in trži rabljene stroje in merilne sisteme v Italiji in v tujini. Stroje si lahko ogledate v našem razstavnem salonu ali pa prek videokonference. Stopite v stik z nami, da prejmete celoten tehnični list, fotografije, videoposnetke in vse informacije o stroju. Možno je organizirati obisk v našem razstavnem salonu ali videokonferenco za ogled stroja na daljavo.

Leto izdelave: 2019, obratovalne ure: 5.000 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F55 SV 078M, Peč - Proizvajalec: Themor Flux - Model: F 55 - Peč za ogrevanje na les s toplotnim zrakom - Leto izdelave/nakupa: 2019 - malo rabljena - dobro vzdrževana Iedpezxw Dbefx Ah Uotn - idealna za ogrevanje večjih prostorov, delavnic, hal ali podobnih stavb Dimnik iz nerjavečega jekla Döring - Proizvajalec: Döring - dvostenski sistem iz nerjavečega jekla - Premer: približno 160 mm - Skupna vgrajena višina do sedaj: približno 10,60 m - Na voljo več podaljškov cevi po 1 m - Vključno z elementi za pregled/čiščenje - Vključno z priključnim/T-kosom - Številne ustrezne stenske nosilce in spojne sponke - Dodatni vgradni material je na voljo - Dimnik je bil nameščen na stavbi in ga je mogoče ponovno uporabiti

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 210610, POWERvac je industrijski sesalnik, ki je primeren za sesanje vseh vrst prahu, lesnih strugnin, olja in vode. Ta različica razreda H je zasnovana za sesanje nevarnih finih prahov, ne glede na vrednost MAK, vključno s kancerogenimi in patogenimi prahi, pri čemer se očiščen zrak vrne v delovno okolje. Sesanje poteka v treh fazah: ciklonsko ločevanje tekočin, grobega prahu in strugnin; ločevanje finih prahov s pomočjo glavnega/žepnega filtra, prevlečenega s PTFE; in zadnja faza varnostnega filtra za preostale fine prahe. Glavni filter uporablja pnevmatsko čiščenje s pritiskom zraka med delovanjem (ni potreben dodaten stisnjen zrak), mehanski centrifugalni separator pa ne potrebuje vzdrževanja. Itjdpfjzy H R Tsx Ah Uon - Moč motorja: 5,5 kW - Pretok zraka: 520 m³/h - Površina glavnega filtra: 22.600 cm² - Skupna največja površina filtra (z varnostnim filtrom): do 47.600 cm² - Prostornina zbiralnika: 100 litrov - Primerno za neprekinjeno delovanje

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 50 h, skupna masa: 640 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer obdelovanca (maks.): 400 mm, stroj je v popolnem stanju. Za več informacij nas kontaktirajte. Itodezugnhjpfx Ah Ujn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: WEILEDER Model: WTK -40/55 PT Kategorija: Pakirni stroj Leto izdelave: 2018 Lokacija: iz obratovalnega mesta Razpoložljivost: kratkoročno Stanje obratovanja: razstavljen/ skladiščen Tehnični podatki Širina prehoda: 400 mm Višina prehoda: 200 mm Maksimalna dolžina obdelovanca: 550 mm Maksimalna širina folije: 600 mm Število spodnjih valjev: 1 Skupno število agregatov: 1 Vzdolžni agregat: 1 Itedpfx Aeyatgcsh Usn Število magazinov: 1 Pakirne postaje: 1 Tehnika prehoda: brezstopenjsko podajanje Skrčljiva folija: vzdolžna folijska postaja Samodejni izvoz: izvedba Mobilna naprava: zapiranje Varilni agregati Oznaka skladnosti: CE-oznaka Skupna priključna moč: 9 kW Potreben prostor dolžina: 2,57 m Potreben prostor širina: 0,87 m Potreben prostor višina: 1,6 m

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: nepreverjeno, Prodam: visokotlačna črpalka Flow 9XVD-55 Ponujamo visokotlačno črpalko Flow 9XVD-55 za uporabo pri rezanju z vodnim curkom. Itjdpfx Ajzrznwoh Uen Stanje: Stroj je izklopljen in pripravljen za prevzem. Prodaja se v trenutnem stanju. Primerna za ponovno uvedbo v obrat, obnovo ali za uporabo kot rezervni deli. Tehnične specifikacije: Proizvajalec: Flow Model: 9XVD-55 Tip: Visokotlačna črpalka za sisteme za rezanje z vodnim curkom Na voljo je veliko rezervnih delov, kot je prikazano na fotografiji. Priloženi so tudi vsi priročniki. Ogled je možen po predhodnem dogovoru.

Stanje: rabljeno, prva registracija: 09/2019, STAS 3 – Prikolica za prevoz žita z dvižno platformo in vibratorjem VIBRATOR / STREPALO!!! • ABS • EBS • WABCO SmartBoard • Platišča ALCOA • 3 x zračno vzmetene osi s kapaciteto 9 ton, proizvajalca JOST / SAF • Sistem za dvigovanje in spuščanje • Dvigni os (1. os) Ijdpfx Ahez Ezu Io Ujtn • Skupna masa: 39.000 kg • Lastna masa: 5.710 kg • Nosilnost: 33.290 kg • Pnevmatike: 385 / 65 R 22.5 • Globina profila pnevmatik: 80–90 %! • Platforma • Pokrovna ponjava • Delovne luči • Pnevmatsko odklepanje zadnjih vrat • Samodejno / pnevmatsko odzračevanje med postopkom naklona • Skupna dolžina prikolice: 10.227 mm • Prostornina: 55 kubičnih metrov - Prvi lastnik - Nemška prikolica - Tehnični pregled (HU / TÜV): veljaven! Napake in vmesna prodaja pridržane! = Dodatne informacije = Letnik izdelave: 2019 Lastna masa: 5.710 kg

Stanje: rabljeno, Leto izdelave: 2013, Leto proizvodnje: 2013 Itsdpfx Ajzrglzeh Usn 240 V, zaščitni razred IP 65 Delovni tlak: 6–8 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), volumenski pretok: 9,7 m³/h, obratovalni tlak: 8 letvica, tlak (min.): 4,5 letvica, tlak (maks.): 8,5 letvica, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, V odličnem stanju, popolnoma delujoč kompresor z vijaki Atlas Copco, model GA 55. Isdpfezzq Ewjx Ah Ustn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, PROIZVAJALEC: ALUP MODEL: ALLEGRO 55 SERIJSKA ŠTEVILKA: API172927 LETNIK: 2015 MOČ (kW): 55 PRETOČNOST (m3/min): 10,1 PRITLAK (bar): 10 DELOVNI ČAS (URE/SKUPNO): 72964 FREKVENČNI PRETVORNIK: da Itjdpoz A Tqvjfx Ah Usn VGRAJEN SUŠILEC: ne IZMENJEVALNIK TOPLOTE: ne HLAJENJE (ZRAK/VODA): zrak NA REZERVOARJU: ne DOKUMENTACIJA: ne PRIDALKOV: 1 NOVO/UPORABLJENO: UPORABLJENO

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, Širina materiala za dovod materiala: 500 mm METRO 55 HACKER – profesionalni stroj za drobljenje lesnih odpadkov. Močan drobilnik za žage, zasnovan za drobljenje lesnih odpadkov, vej, desk in proizvodnih ostankov v žagah in podjetjih za obdelavo lesa. Njegova robustna konstrukcija in zmogljiv sistem za rezanje zagotavljajo zanesljivo in učinkovito delovanje tudi pri visoki obremenitvi. Stroj je idealen za proizvodnjo goriva iz lesnih sekancev, biomase in materiala za nadaljnjo obdelavo. Širina materiala za dovod materiala: 500 mm Število nožev: 2/3/4 Glavna moč stroja: 55 kW Moč motorja za dovod: 2x3 kW Hitrost podajanja: 25 m/1 min Samodejna regulacija obremenitve motorja. Lastnosti izdelka: - visoka delovna učinkovitost, - robustna jeklena konstrukcija, - varno sistema za dovod materiala, Isdsz H Tvaspfx Ah Ustn - možnost neprekinjenega delovanja, - enostavno upravljanje in vzdrževanje, - uporaba v žagah in industrijskih obratih. Uporaba: Drobljenje lesa in lesnih odpadkov iz žag, Proizvodnja lesnih sekancev, Priprava biomase, Recikliranje lesnih odpadkov.