Compactsystem Martina 30 nakup rabljenega (24.830)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² Lasdjvz Hqtopfx Al Noa - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Ljdpfxjvz Hqme Al Njaa Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Laedpfx Aovz Hq Tol Nea Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% Lodsvz Hq Hepfx Al Neaa - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 Lsdpovz Hqyjfx Al Neaa The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. Lajdpfx Aovz Hqgjl Nja A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ Lsdpjvz Hhxsfx Al Neaa - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 2005, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna višina: 1.800 mm, višina izdelka (maks.): 4 mm, skupna masa: 7.000 kg, Shearing capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorised backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Lajdotp I S Aspfx Al Noa

Stanje: zelo dobro (rabljeno), Kataloška številka 7374 TEHNIČNI PODATKI - Dimenzija zgornjega nalivnega lijaka (d/š): 840x620mm - Dimenzija spodnjega nalivnega lijaka (d/š): 300x300mm - Širina rotorja: 340mm - Motor: 22kW - Sito: 15mm - Število nožev: 6 kos - Iztok za zdrobljen les: fi 160mm Lsdpfsy At Nqex Al Nsaa - Dimenzije d/š/v: 1400x800x2000mm - Teža: 840kg PREDNOSTI – Nemška izdelava – Zelo dobro stanje – Rabljen sekalnik Neto cena: 23.900 PLN Neto cena: 5.690 EUR odvisno od tečaja 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih tečaja)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7026 TEHNIČNI PODATKI - širina vnosa: 740 mm - višina vnosa: 300 mm - širina osi: 780 mm - premer osi: 1000 mm - dolžina rezila: 780 mm - število rezil: 2 kos - dimenzije sita: 55x55 mm - spodaj: 4 zobate vlečne osi - motor spodnje osi: 5,5 kW - zgoraj: 3 zobate vlečne osi - motor zgornje osi: 5,5 kW - tračni podajalnik - dolžina podajalnega traku: 4300 mm - širina podajalnega traku: 600 mm - motor podajalnega traku: 2,2 kW - glavni motor: 90 kW - vzvratna vožnja - avto-reverz - skupne dimenzije stroja (d/š/v): 4600 x 2350 x 1700 mm - skupne dimenzije podajalnika (d/š/v): 4550 x 980 x 970 mm - skupna teža: cca 11000 kg – nemška proizvodnja, - avto-reverz (z možnostjo nastavitve) – rabljen sekalnik, zelo dobro stanje Cena brez DDV: 265900 PLN Laodpfx Aeyk Hfajl Noa Cena brez DDV: 63300 EUR Cena brez DDV izračunana po tečaju 4,2 PLN/EUR (ob večjih valutnih nihanjih se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), Kataloška številka 6726 TEHNIČNI PODATKI - Vhod lijaka za polnjenje: 280x300mm - Izhod za zdrobljen les: premer 310mm - Delovna širina rotorja: 340mm - Glavni motor: 22kW - Število nožev: 6 kosov - Dimenzije (d/š/v): 1300x1150x1680mm - Teža: 720kg PREDNOSTI – Zelo dobro stanje – Rabljen sekalnik Neto cena: 19.900 PLN Neto cena: 4.740 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih valutnih nihanjih se cena lahko spremeni) Lsdpjignt Uefx Al Njaa

Leto izdelave: 2010, stanje: dober (rabljeno), Na prodaj je naš Asys-ov blažilni sistem. Tip: FPS 30 B Leto izdelave: 2008 Stanje: dobro Takoj na voljo. Lajdpfoyylqzex Al Noa

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) Ledpfsyxccrsx Al Neaa • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: dober (rabljeno), Line for filling, capping, and labeling PET bottles, suitable for non-carbonated liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 Piston Filler - Adjustable output: up to 3,000 bottles (packages/hour) - Number of filling heads: 8 pcs - Number of capping heads: 4 pcs - Bottle capacity: 200 – 1000 ml - Package dimensions: ~ diameter: 50 – 110 mm ~ height: 150 – 330 mm ~ minimum bottle neck diameter: 18 mm - Weight: 1100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ length: 1500 mm ~ width: 1150 mm ~ height: 2300 mm Currently, the machine is set up for 1000 ml bottle format. Additional format for 500 ml bottles included. The set also contains numerous spare parts and seals. 2) Hot-melt Roll-fed Labeller for Foil Labels - Manufacturer: JAWOTECH s.r.o. - Model: Tech – Lab HM - Capacity: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ length: 2000 mm ~ width: 1200 mm ~ height: 1800 mm Automatic glue application system by renowned manufacturer NORDSON. The machine is set up for labeling 1 L bottles. Other bottle formats require adaptation of the infeed element. Lasdswyddyopfx Al Nea 3) Plate conveyors, length: 850 cm. The machines are used, in working order, and have been regularly serviced. Video of the machines in operation available before dismantling. Photos show the current condition in our warehouse.

Stanje: dober (rabljeno), Bandall BA 24/15-30 stroja za trakovanje Eden najbolj prepoznavnih strojev za trakovanje na svetu, vodilni na trgu. Lodjyurznepfx Al Noaa Proizvajalec Bandall, Nizozemska. Stroj v zelo dobrem stanju, nedavno servisiran. Leto izdelave: 2016 Stroj deluje v ročnem ali avtomatskem načinu. Proizvodna verzija, primerna za težke tovore. Stroj je nameščen na samostojnem ogrodju s kolesi za transport. Deluje na jumbo role. Po vstavljanju materiala stroj obda s trakom, stisne in zatesni, kar ustvari eleganten paket. Idealen za zavijanje vizitk, letakov in drugih materialov. Upravljanje preko LCD panela. Tehnične specifikacije: Širina traku: 30 mm Kapaciteta: 36 ciklov/min Dimenzija odprtine stroja: 320 x 160 mm Priložen je filmski rol.

Stanje: zelo dobro (rabljeno), 30 lfm Shelf Rack Schäfer Type R3000 Used equipment, as-new condition, see pictures Height: 2.5 m Depth: 80 cm Ledpod Nf Svsfx Al Neaa Load capacity per shelf: 250 kg Bay width: approx. 128 cm Asking price: €6,900 net ex-warehouse Offer includes: - 24 uprights or frames, 2.5 m, galvanized - 144 shelves (250 kg load capacity per shelf), galvanized - 9 cross braces for stabilization 6 levels per bay (additional levels available for a surcharge) Also available with a bay width of 100 cm! Other configurations possible. Heights of 2.5 m or 3.5 m available. Goods in stock. Delivery and assembly available on request. Viewing possible anytime by appointment. Further information on request. We always have more than 5,000 lfm of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our Terms & Conditions, all prices exclusive of VAT, ex-warehouse.) Purchase / Sale: We are constantly looking for and offering numerous items from a wide range of sectors - Broom-clean business clearances - Business closures - Fast, flexible, responsive! - We also clear and/or dispose for liquidators. Send us a brief message, and we will contact you promptly. To visit our page, please click on our logo!

Stanje: dober (rabljeno), Approx. 30 running meters of shelving rack Schaefer R3000 Manufacturer: Schaefer R3000 Condition: as new, see pictures. Over 300 meters available. Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load capacity per shelf, bay width approx. 100 cm Negotiable price: €2,690.00 net ex stock Scope of supply: - 31 uprights or frames, 2.5 m, galvanized - 90 shelves, 100 kg load capacity per shelf, galvanized - 10 cross braces for stabilisation - 3 levels per bay (more levels available for an additional charge) Other configurations possible. Ledpfx Aljcfhx Tj Njaa Heights of 2.3m, 2.5m, or 3m available. Goods are in stock. Constantly over 3000 linear meters of pallet racking from numerous manufacturers available from stock. Transport and assembly available on request. Further information on request. (Specifications, details, and prices subject to change and errors. Sale subject to prior sale! Please see our T&Cs; all prices exclude VAT ex stock) Purchase / Sale We are constantly searching for and offering numerous items from various sectors. To access our website, please click on our logo! - Broom-clean business clearances - Liquidations - Fast – flexible – efficient! We also clear and/or dispose for insolvency administrators. Write to us with brief details, we will respond promptly.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potreba po zraku: 200 m³/h, skupna širina: 2.400 mm, skupna višina: 2.350 mm, skupna dolžina: 3.500 mm, Patronski filtrirni sistem MBX-6000 z 8 patronami. Za filtracijo vseh vrst prahu, npr. lesa, peska itd. Učinkovit pretok zraka 6000 m³/h, električni motor 9 kW, 3x400 V, 50 Hz, filtrirna površina: 104 m² (8x13 m²), filtrski razred: M, po DIN 60335, pnevmatsko čiščenje filtra, čas izpihovanja 10 min. Posoda za prah: 4 kos, po 30 litrov. Peskalna posoda Clemco (rabljena) 100 litrov. Vijačni kompresor Renner RSK 1-30, letnik 2020, 1178 delovnih ur. Lajdpsx Ai Hpofx Al Nja

Stanje: dober (rabljeno), Com J240/30 stroj za ovijanje na podstavku Eden najbolj prepoznavnih proizvajalcev strojev za ovijanje na trgu, izdelan na Japonskem. Stroj deluje v ročnem ali avtomatskem načinu. Industrijska izvedba, primerna za težke obremenitve. Stroj je nameščen na samostojnem ogrodju s kolesi za transport. Lasdpfx Alsyrz R To Noa Deluje z jumbo rolami. Po vstavljanju materiala stroj ovije s trakom, stisne in zalepi, kar ustvarja eleganten paket. Idealno za pakiranje vizitk, letakov in drugih materialov. Tehnične specifikacije: Širina traku: 30 mm Učinkovitost: 26 ciklov/min Dimenzije ovitega izdelka: 240 x 150 mm Izdelano na Japonskem. Teža: 70 kg.

Leto izdelave: 2025, obratovalne ure: 2 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos quickly and easily, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software is capable of extracting data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD (German/English) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (one-sided or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height approx. 300mm • Electrically adjustable Z-axis • Laptop with mount and Windows OS • Frame made of aluminum profile • Air-cooled Lasdpfxeqfcvio Al Nea • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, model krmilnika: DNC 80, stopnja avtomatizacije: ročni, Jonescheit Hytap 30 avec DNC 80 – Plieuse robuste avec commande éprouvée À vendre : une Jonescheit Hytap 30 avec commande DNC 80. Il s’agit d’une plieuse robuste et éprouvée, idéale pour une utilisation en atelier ou en production. La machine convient pour des travaux de pliage précis et séduit par sa construction solide ainsi que la simplicité d’utilisation de la commande DNC 80. Elle représente une solution intéressante pour les entreprises à la recherche d’une plieuse opérationnelle et immédiatement disponible. Données techniques : Fabricant / Modèle : Jonescheit Hytap 30 Lajdeyxakyspfx Al Noa Commande : DNC 80 Année : 1995 Version : manuelle État : occasion, entièrement fonctionnelle Remarques : La machine est vendue sans outils. Une visite et un essai sur site sont possibles. État : Occasion, prête à l’emploi. Conclusion : Une plieuse solide pour les utilisateurs recherchant une machine éprouvée avec commande DNC. Idéale pour une visite et un essai de fonctionnement sur place.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, število valjev: 3, premer valja: 118 mm, skupna masa: 220 kg, moč: 0,75 kW (1,02 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Oprema: CE označba, dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, NOVO!!! LFSS PK 30 Profilni upogibalni stroj, ukrivljač cevi 30 mm /ct2275/ Proizvajalec: LFSS Tip: PK30 Letnik: 2025 Lajdpfxjxh D Nvo Al Nja Horizontalno in vertikalno delovanje 2 pogonska valja Zgornji valj ročno nastavljiv gor in dol Maks. premer osi: 30 mm Delovna hitrost: 4 m/min Zmogljivost upogibanja: - Ploščato železo: 50 x 10 mm - Kvadrat: 35 mm - Zaprt profil: 40 x 40 mm - Cev: 48 x 3 mm Priključna moč: 400 V / 0,75 kW 50 Hz Električno nožno stikalo z izklopom v sili Standardni komplet za upogibanje Teža: pribl. 200 kg CE certifikat Navodila v nemščini ali angleščini Dimenzije: Š 700 x V 1450 x G 750 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 30.000 kg, Oprema: nožno daljinsko upravljanje, 30 tons load capacity, self-centering, new 380V Hand and foot remote control Lsdpfxjwrpfgo Al Njaa Rotation speed: 100 – 1000 mm/min Diameter range: 600 – 4500 mm Drive wheel diameter: 350 mm x width 180 mm Material: heat-resistant, non-slip PU Dimensions: 2350 x 1460 x 1050 mm Dual drive, synchronized

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 30.000 kg, Container rotator with 30-ton load capacity, 400 V, 32A. Dual drive motors with synchronized control. Suitable for container diameters from 570 mm to 4,500 mm. Infinitely variable speed control via remote control, right/left rotation. Forklift pockets for easy handling. Roller diameter: 350 mm x 180 mm, polyurethane (PU) coated. Travel speed: 100 – 1,000 mm/min. Lodjwinxajpfx Al Neaa Drive motors: 2 x 1.1 kW. Dimensions approx. 2,750 mm x 500 mm. Total weight (complete): 1,200 kg. Synchronized dual drive. Brand new machine – special price! Total weight: 1.9 tons.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Prodam profesionalni lepilni agregat Robatech RoBa 30, švicarske izdelave (Robatech AG CH-5630 Muri). Naprava je popolnoma delujoča, kompletna in pripravljena za uporabo. Idealna za pakirne linije, zgibne-lepilne stroje, kartonažerje ter stroje, ki zahtevajo natančno doziranje talilnega lepila. Tehnični podatki: * Model: RoBa 30 * Leto izdelave: 1984 * Zmogljivost: 900 g/min * Maks. hidravlični tlak: 40 bar * Maks. zračni tlak: 5 bar * Maks. delovna temperatura: 200°C * Napajanje: 240 V * Poraba toka: 10 A * Prenos črpalke: 1:8 Lsdpfxoum Hufo Al Njaa * Identifikacijska ploščica je čitljiva, manometer deluje Stanje: * naprava v dobrem tehničnem stanju * kompletna, brez manjkajočih delov * švicarska kakovost – zelo trdna konstrukcija