Biesse Stream A 6.0 nakup rabljenega (80.659)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Rabljeni BIESSE STREAM A 6.0 - Leto izdelave: 2018 - AirForce sistem (brez vidne fuge) Pgodpfoy S E Nnex Altep - Razpoložljivost: avgust 2026 - Smart Touch - Priključna rezkalna enota - Lepljiva enota - Obojestranska čelilna enota (2 motorja) - Poravnalna rezkalna enota - Fina rezkalna enota - Oblikovalna rezkalna enota (2 motorja) - Strgala (profilna in ravna) - Polirna enota - Ločen lepilni rezervoar - Do 25m/min - Dolžina stroja ca. 7500mm - Teža: 3800kg - Na voljo več slik in video. Povprašajte nas.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Pjdsyxndbepfx Altegp Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: rabljeno, številka stroja/vozila: 008030, Tip nameščenega roba: tanek rob, močan rob, masivni les Lepilni sistem: EVA, PUR, vroči zrak Pjdpowvq Hgsfx Altegp Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 8 kosov

Stanje: rabljeno, številka stroja/vozila: 007848, Type of applied edging: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Joint trimming: yes Multifunctional unit: yes Max. feed speed: 20 m/min Podpewkrqpsfx Altogp Maximum panel thickness: 60 mm Processing units: 8 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height electronically adjustable via CNC Motorized panel support fence, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate with 1 position Gluing unit for EVA hot-melt adhesive with glue pot Pgsdpjwlbxlsfx Altsp End trimming unit with 2 motors, featuring a dynamic extraction system that follows the blades during all movements Flush and bevel trimming unit with 2 offset motors, electronically adjustable by CNC Anti-adhesive unit Corner rounding unit, multifunction with 2 motors (bevel trimming + corner rounding) Electronic edge scraper unit, electronically adjustable by CNC Glue scraper unit "SP-501" brush unit Automatic return system for workpieces with Winner 4A bridge offload

Stanje: rabljeno, Leto izdelave: 2019, Numerical smart-touch control with Sintra HD software Panel thickness: 10 - 60 mm 22 mm solid wood PVC / ABS up to 3 mm Feed speed up to 25 meters/min Working height electronically adjustable via CNC Motorized pressure belt with increased pressure Motorized and electronically adjustable panel carrier guide via CNC Side roller conveyor with support wheels for panel support ADZ-700 anti-adhesive unit Rectifier unit with 2 electronically controllable motors via CNC FI-502 Lamps for heating the panel edge AdIRL-700 Roller holder plate in 1 position Gluing unit for EVA hot-melt adhesive with QM-705 glue pot Additional glue tank Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC Anti-adhesive unit End trimming unit with 2 motors IN-801 Offset trimming / fine finishing unit with 2 electronically adjustable motors via CNC RF400 PRO-NESTING KIT for finishing unit Anti-adhesive group Corner rounding unit with 2 multifunctional motors (relieving + rounding) AR30 NC LPT-700 anti-adhesive liquid application system Electronic edge scraper electronically adjustable via CNC RB400 PRO-NESTING KIT for edge scraper RCC-701 glue scraper unit Brush unit "SP-501" Pgjdjr Ip Sdjpfx Altjp Telephone support unit "PH-700"

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Pgjdpsu Rc Anefx Altep Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Pgjdpfxeu Rc Hyj Altsp Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: rabljeno, številka stroja/vozila: 007809, Vrsta nameščene obrobe: tanka obroba, močna obroba, masiven les Sistem lepljenja: EVA, PUR Stroj za lepljenje robov: stroj 1 Psdpfx Asyhbn Djltegp Največja širina plošče: 1200 mm Največja podajalna hitrost: 40 m/min Delovni agregati, desna stran: 8 kos Delovni agregati, leva stran: 8 kos

Stanje: rabljeno, številka stroja/vozila: 008483, Tip nameščenega roba: tanek rob, debel rob Pgedpsyxmx Rsfx Altsp Lepljenje sistem: EVA Multifunkcijska enota: da Maks. podajalna hitrost: 30 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kos

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Pgedpfx Alol Txw Hetop Gluing system: EVA Joint milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: rabljeno, številka stroja/vozila: 008247, Tip pritrjenega roba: tanek rob, debel rob Lepilni sistem: PUR Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Maks. podajalna hitrost: 25 m/min Pedpfx Aezbrn Uoltogp Maksimalna debelina plošče: 60 mm Delovni agregati: 9 kos

Stanje: rabljeno, številka stroja/vozila: 008250, Pozicija 1: Enostranski stroj za lepljenje robov BIESSE-STREAM B1 9.0 Pozicija 2: Transfer BIESSE-STREAM B1 9.0 Pgjdpfex Dipmex Altjp Pozicija 3: Enostranski stroj za lepljenje robov BIESSE-STREAM B1 9.0

Stanje: rabljeno, številka stroja/vozila: 005062, Type of applied edge: thin edge, thick edge Psdpoybawdefx Altogp Adhesive system: EVA Joint milling: yes Multifunctional unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Stanje: rabljeno, številka stroja/vozila: 008249, Tip nameščene robne obloge: tanka rob, močna rob Lepljenje: PUR Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 25 m/min Pedpfxszbrl Te Altjgp Največja debelina plošče: 60 mm Delovni agregati: 8 kos

Stanje: rabljeno, številka stroja/vozila: 007811, Položaj 1: Nakladalnik BIESSE - RBO-STREAM SB Položaj 2: Dvostranski stroj za obdelavo robov BIESSE - RBO-STREAM SB Pgjdpfxev Dyxcj Altjp Položaj 3: Stroj za obračanje plošč BIESSE - RBO-STREAM SB Položaj 4: Dvostranski stroj za obdelavo robov BIESSE - RBO-STREAM SB Položaj 7: Stroj za obračanje plošč BIESSE - RBO-STREAM SB Položaj 8: Razkladalnik BIESSE - RBO-STREAM SB

Stanje: rabljeno, številka stroja/vozila: 007641, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Edgebanding machine: Machine 1 Max. panel width: 1200 mm Pgsdpfxswuz R Hs Altop Working units, right side: 8 units Working units, left side: 9 units

Stanje: rabljeno, številka stroja/vozila: 007357, Pozicija 1: Nakladalec BIESSE - RBO-STREAM SB2 9.5 Pozicija 2: Dvostranski robni lepilni stroj BIESSE - RBO-STREAM SB2 9.5 Pgjdpfxjwuz Rts Altep Pozicija 3: Obratnik plošč BIESSE - RBO-STREAM SB2 9.5 Pozicija 4: Dvostranski robni lepilni stroj BIESSE - RBO-STREAM SB2 9.5 Pozicija 5: Obratnik plošč BIESSE - RBO-STREAM SB2 9.5 Pozicija 6: Razkladalec BIESSE - RBO-STREAM SB2 9.5

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, moč: 40 kW (54,38 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, vrsta nastavitve višine: električni, hitrost pomika os X: 30 m/min, Oprema: CE označba, dokumentacija / priročnik, Biesse STREAM B MDS 2.0/15.0 Pgjdpfx Aleyu S Iustjp

Stanje: zelo dobro (rabljeno), COMPLETE 4-SIDED EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X03001A) Loading portal (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided sizing and edge banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Workpiece turning device (90° LONGITUDINAL to TRANSVERSE) "RBO" Model GPK 1 X03001D) 2nd double-sided sizing and edge banding machine "BIESSE" Stream SB 2 - 11 X03001E) Workpiece turning device (90° TRANSVERSE to LONGITUDINAL) "RBO" Model GPK 2 X03001F) Unloading portal (with 2 unloading stations) "RBO" Model Winner S 3200 Pgodpfxsi Rbg Te Altop

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE, including for NARROW PARTS min. 65 mm, with high-speed conveying technology, No. 3 CNC-controlled through-feed drilling machines (one for lateral drilling in longitudinal direction), and No. 1 through-feed crosscut saw (splitter) Comprising the following machines: W05024A) Loading device (gantry) "RBO (BIESSE)" model Winner C W05024B) 1st Single-sided sizing and edge-banding machine (left) "BIESSE" model Stream SB1 TWIN W05024C) 2nd Single-sided sizing and edge-banding machine (right) "BIESSE" model Stream SB1 TWIN W05024D) 1st Turning device (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" model GPK-1 W05024E) Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 / 11.0 W05024F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024H) 2nd Turning device (90° TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" model GPK-2 W05024I) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (for lateral drilling in longitudinal direction) Pgodpfx Ajtr Envjltjp W05024J) Through-feed crosscut saw (splitter) "TECNOLOGICA" W05024K) Dust extraction and cleaning machine "WANDRES" W05024L) Stacking device (gantry) "RBO (BIESSE)" model Winner SC

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE (also SOFTFORMING) with through-feed drilling machines, splitter, and high-speed automatic conveyor technology. Configured as follows: A) Infeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner C (1) B) 1st Double-sided sizing and edge-banding machine "BIESSE" model Stream SB1 11.0 Softforming C) 1st Rotation station (90° LONGITUDINAL–CROSS) "RBO (BIESSE)" model GPK-1 D) 2nd Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 9.5 E) 2nd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-2 Pgsdpfxettgy Hs Altsp F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) H) 3rd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" model Split 4-84 LT L) Outfeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner SC (2)

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in line) Edging material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Cam pitch (mm): 500 FORMATTING UNIT (per side): - Pre-milling cutter (trimming) AS 10 (5.8 kW) Pgodpfx Aeu Tg Uqjltep - 2 x Hogger DT 10 (5.8 + 5.8 kW) - Spray unit (for liquid anti-adhesive) EDGE BANDING UNIT (per side): - Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edging pressure area (CNC-controlled). Edge magazine for rolls (capacity 6 rolls) - End trimming unit IT 90-S (0.3 kW x 2) 28 m/min. 0 - 25°. PNEUMATIC - Multi-profile milling unit (CNC-controlled) RF 30 (0.65 kW x 2) 0 - 25° Multi-function unit (radius milling and shaping) AR 80 (0.3 kW x 2) 25 m/min - ROTAX Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraper unit (CNC-controlled) RB 30 Flat scraper unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for panels (usable height 80 mm), as a buffer to speed up the work cycle

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: Pgsdshvah Nepfx Altsp A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Stanje: zelo dobro (rabljeno), Double-sided EDGE BANDING AND FORMATTING MACHINE (First machine in a production line) Edge material (coils) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Pgjdpst N Ix Rjfx Altep Safety and noise protection: Enclosed cabin Side adjustment of aggregate carrier: manual FORMATTING PROCESSING (for each side): 2 x Hogging unit DT 10 (Kw 5.8 x 2) Free slot for jointing milling unit FS Jointing milling unit ES30 + ER30 (Kw 5 x 2) 0° - 90° Universal milling unit softforming SF 10 (2 x Kw 2.4) 0° - 45° Spraying unit (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Pre-heating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions) mm 800 (Guillotine CI10+CS10+RL10) - Edge magazine for coils (No. 6 compartments) Milling unit RS 10 (Kw 1.3 x 2) Milling unit softforming RF 10 / SF (Kw 0.65 x 2) Multi-profile milling unit RF 30 (Kw 0.65 x 2) Universal milling unit for grooving/rebating and profiling FB 30 (Kw 4.5 x 2) 0 - 90° Multi-profile scraper blade unit RB 30 Flat scraper blade unit RC 05 / Soft Spray aggregates (for polishing fluid) + Buffing unit SZ 30 (Kw 0.37 x 2)