Amtec Bld 9 nakup rabljenega (19.593)

Stanje: novo, Leto izdelave: 2025, Fully automatic case erector for an efficient and economical packaging process. Cartons are automatically picked from the magazine, erected, and sealed from the bottom (single direction). The erected boxes are then conveyed onto a transport belt and collected for filling. Specifications: SIEMENS PLC, SIEMENS touchscreen; Carton size in mm: L(350-650)xW(150-500)xH(100-500); max. machine cycle rate (idle): 9 cycles/minute; Power supply: 110/220V, 0.3kW; Air supply: 5-6 bar, 0.4m³/min; Tape width in mm: 48/60/75; Machine dimensions: L2200xW1900xH1450mm; Weight: 530kg. Iodsv Nkviepfx Aquobc Please note that our prices for new machines are often below average used equipment prices. Feel free to contact us with your packaging requirements. - Usually, 30-50 different new machines are available for immediate delivery from stock. For custom-built equipment, we offer very short lead times from approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Packaging system for dosing and filling granulates into pre-made bags, followed by vacuum sealing of the bag. Working steps: Bag removal, dosing of granulate via scale, shaping the bag into a brick form prior to filling, vacuuming and sealing, and discharging the bag. Suitable for granular materials such as coffee beans, grains, rice, animal feed, seeds, beans, peanuts, salt, chemical fertilizers, etc. PLC controlled, operation via touchscreen. Suitable for poly bags. — Specifications: Filling range: 500–5000g; Accuracy: ±5g; Maximum machine cycle rate (idle): 9 cycles/minute; Power: 380V, total 5kW; Compressed air: 0.85m³/min, 6–8 bar; Machine dimensions: L2260×W2925×H2500mm. Isdpfx Ajv Nm Afjquebc Please note that our new prices are often below typical used prices. Feel free to inquire and tell us about your packaging requirements. — We usually have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. — All machines are supplied with full warranty.

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), Stroj za obdelavo plastike, leto izdelave 2020. Ta model AMTEC Speed Shrink 40 PRO ima termični tunel z dimenzijami 600 x 400 mm in hitrost transporta 0–20 m/min. Deluje pri maksimalni temperaturi do 250 °C in se napaja s trifaznim izmeničnim tokom 380 V. Če iščete visokokakovostne rešitve za pakiranje s termično skrčljivo folijo, razmislite o stroju AMTEC Speed Shrink 40 PRO, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. Ibsdpfez R A H Djx Aquec

Stanje: novo, Leto izdelave: 2025, VFFS machine with integrated free-fall metal detector for inspecting vertically falling products, equipped with a 14-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photosensor (print mark detection) for seal/cut position; servo-driven sealing unit for end seals; servo motor for film draw-off; ribbon printer for batch number, date, and best before date (BBD). - Multihead weigher specifications: Number of weighing heads: 14; Weighing range (single discharge): 1~60g; Volume per head: 0.3L; Weighing accuracy: X(0.5); Discharge flap: single flap; Surface finish: smooth (optionally dimpled); Product contact parts: AISI 304 (optional upgrade to AISI 316 at extra cost). - Free-fall metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; pipe diameter: according to forming collar. Isdpfxjv Nnbcs Aqujbc - VFFS machine specifications: max. machine cycle rate (idle): 90 cycles/minute; bag size: L(40-250)xW(50-170)mm (double film draw-off possible for longer bags); suitable film width: 120-360mm; product contact parts: AISI 304 (optional AISI 316 at extra cost); power supply: 220V, 50/60Hz; required compressed air: 0.4-0.8MPa. Please note that our new prices are often below the usual prices for used machines. Feel free to contact us and let us know your packaging requirements. - Typically, 30-50 different new machines are always available from stock for immediate delivery. For custom-manufactured machines, we offer short lead times of approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for producing pillow bags with back seam and gusset stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for seal/cut positioning; servo-driven sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. machine cycle rate (no load): 90 cycles/minute; bag size: L(40-310)xW(70-200)mm (double film feed L = 450mm), gusset stand-up pouch: L(40-310)xW(60-150)xD(30-80)mm (double film feed L = 450mm); suitable film width: 160-420mm; product-contacting parts made of: AISI 304 (optional AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 4.4kW; required compressed air: 0.7MPa; compressed air consumption: 0.20-0.35m³/min; weight: 450kg. Ibodov Nncmopfx Aqusc Please note that our new prices are often below the usual prices for used equipment. Simply send us your enquiry and specify your packaging requirements. - Typically, 30-50 different new machines are immediately available from stock. For machines manufactured to customer specifications we offer very short lead times, starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset former required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven end sealing unit; servo motor for film draw-off; ribbon coder for batch number, date, and expiry date (best before date). - VFFS machine specifications: max. machine cycle rate (idle): 90 cycles/minute; bag size: L(40-200)xW(30-150)mm; suitable film width: 80-320mm; product-contact parts made of AISI 304 (optionally, AISI 316 at additional cost); power supply: 220V, 50/60Hz; power consumption: 4kW; required compressed air: 0.7MPa; compressed air consumption: 0.1-0.3m³/min; weight: 320kg. Please note that our new prices are often below typical used equipment prices. Feel free to send us an enquiry and tell us about your packaging requirement. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with full warranty. Ibsdpfev Nncasx Aqujc

Leto izdelave: 2025, stanje: novo, Industrial mixer for dry, moist or pasty products, specifically designed for products with a high specific weight. The single-shaft spiral mixer ensures homogeneous mixing of products within just a few minutes. - Specifications: - Agitator type: Single-shaft spiral agitator - Capacity: max. 9,000 litres - Maximum idle speed: 20 rpm - Power: 90 kW - Machine dimensions: L6500 x W2100 x H2800 mm - Weight: 9,800 kg The machine/plant is also available in multiple configurations for various packaging sizes and speeds. Ibodpfov Nly Aex Aquoc Please note that our new machine prices are often below common used equipment prices. Feel free to contact us with your packaging requirements. Typically, 30–50 different new machines are immediately available from stock. For custom-built machines, we offer very short lead times from approx. 3 weeks. All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Intermittent flow wrapping machine for wide and tall products. Film feeding from below. Servo motor-driven infeed, longitudinal and end sealing, PLC-controlled, operation via touchscreen. “No product – no bag” function. – Specifications: max. machine cycle rate in idle mode: 20 cycles/min; bag dimensions (not product dimensions): L(80-unlimited)xW(max.390)xH(10-200)mm, with W+H max. 390mm; suitable film width max.: 800mm; suitable film thickness: 30-75µm; number of knives: 1 piece; end seal: intermittent (up and down motion); number of servo motors: 3 (infeed, longitudinal and end sealing); machine frame (standard version): stainless steel 304; product-contacting parts: stainless steel 304, food-grade conveyor belt; power supply: 220V, single-phase, 50Hz; rated power: 5.2kW; machine dimensions (LxWxH): 4200x1400x1450mm; weight: 1200kg. Please note that our new machine prices are often lower than the typical prices for used machines. Feel free to contact us and let us know your packaging requirement. – We always have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from about 3 weeks. – All machines are supplied with a full warranty. Iedpfx Aev Nlg Njqusbc

Leto izdelave: 2025, stanje: novo, Packaging machine for tissues, controlled via touchscreen and PLC. Includes infeed conveyor belt and adjustable speed control, extremely stable operation. Tear-open features available in various shapes. Equipped with MITSUBISHI PLC, WEINVIEW touchscreen control monitor, pneumatic components from AIRTAC, and electrical components from FUJI. – Specifications: Bag sizes: L(70-110)xW(50-55)xH(16-23)mm; max. idle machine cycle rate: 90 cycles/minute; power supply: 380V, 7.0 kW; machine dimensions: L2940xW2650xH1720mm; weight: 1500kg. Ijdpfxov Nmbuj Aqusbc Please note that our new equipment prices are often below the typical prices for used machines. Feel free to inquire and tell us about your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting at approx. 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic case erector for an efficient and cost-effective packaging process. Cartons are automatically taken from the magazine, erected, and sealed from the bottom (one direction). The erected boxes are then conveyed out onto a transport belt and collected for filling. Specifications: SIEMENS PLC, SIEMENS touchscreen; Carton size in mm: L(250-450)xW(150-400)xH(100-400); Max. machine cycle rate (idle): 12 cycles/minute; Power supply: 110/220V, 0.3kW; Compressed air: 5-6 bar, 0.4 m³/min; Tape width in mm: 48/60/75; Machine dimensions: L2300xW1900xH1700mm; Weight: 650kg. Iodpfx Asv Nkvpoquebc Please note that our new equipment prices are often lower than typical used machinery prices. Feel free to contact us and let us know your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic high-speed case erector for an efficient, fast, and thus economical packaging process. The cartons are automatically taken from the magazine, erected, and sealed from the bottom (in one direction). The side-positioned cartons are then discharged for collection. - Specifications: PLC controlled, operation via touch monitor; Carton size in mm: L(130-280)xW(80-200)xH(80-200); maximum machine cycle rate (idle): 20 cycles/minute; magazine capacity: H = 600mm; Power supply: 110/220V, 1kW; compressed air: 5-8 bar, 0.3m³/min; tape width in mm: 36/48; machine dimensions: L1680xW1210xH1260mm; weight: 700kg. Ibodpfxov Nkvvj Aqujc Please note that our new machine prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we can offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty.

Leto izdelave: 2025, stanje: novo, Automatic powder filler and lid sealer for small containers such as coffee capsules. - Suitable for filling powdered products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into various capsule-shaped container sizes/forms (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with/without filter, etc.) with subsequent sealing. Automated filling and dosing via auger doser. UV sterilization system, ionizer, and dust extraction system for cavity formats included. Automatic film feed and double heat sealing of the lid. Ibjdpfov Nkz Eox Aqujc - Specifications: • Maximum idle speed: 90 cups/minute • Filling range: 0-20g • Filling accuracy: +/- 0.15g • Hopper capacity: 10L (approx. 6kg powder) • Power supply and consumption: 3-phase, 220V, 7.5kW • Required compressed air and flow rate: 6-8 bar, approx. 300L/min • Protective gas flow rate: approx. 200L/min • Machine dimensions: L3420xW2200xH2688mm • Weight: 900kg The specifications refer to Nespresso capsules; deviations may occur with capsules from other brands. Please note that our new prices are often lower than typical used equipment prices. Feel free to inquire and share your packaging requirements with us. – We generally have 30–50 different new machines immediately available from stock. For machines requiring customer-specific manufacturing, we offer very short delivery times starting from around 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2026, Packaging line for the production and packaging of wet wipes such as hygienic wipes, cleaning wipes, care wipes, and disinfectant wipes. The manufacturing process includes unwinding the nonwoven material from the parent roll, longitudinal slitting for 2-lane operation (through to packaging), liquid impregnation, longitudinal folding into Z- or W-shape, cross-cutting (wipe length), one cross-fold, stacking, and transfer to the packaging unit. The packaging unit manages film feed and wrapping of the wet wipes, die-cutting (for wipe removal), and placement of the resealable label, as well as pouch cutting and heat sealing. Integrated splicing units increase efficiency during material, film, and label roll changes. - Specifications: - Suitable for dry nonwovens (spunlace nonwovens) - Fold type: Z- or W-fold (change of folding tool required) - Fold size on each side adjustable - Size of folded wipe: L(70-100)xW(40-100) mm - Size of unfolded wipe: L(140-200)xW(140-200) mm - Number of wipes per pack (min. to max.): 5-30 wipes - Wet wipe basis weight: 35-80g/m² - Machine cycle rate, no load: max. 900 wipes/min or max. 90 packs/min - Pouch size: depends on fold size and number of wipes per pack - Film reel dimensions: max. width 280 mm, max. diameter 400 mm - Suitable films: OPP film (transparent, printed, or laminated) - Parent roll nonwoven dimensions: width 280-400 mm, max. diameter 1200 mm - Label roll dimensions: max. width 60 mm, max. diameter 300 mm - Power: 25 kW, 380 V, 3-phase - Machine dimensions: L8500xW1520xH2350 mm - Weight: 5000 kg Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us with your packaging requirements. Typically, 30-50 different new machines are immediately available from stock. For customer-specific builds, we offer very short delivery times, starting from approx. 3 weeks. All machines are available with full warranty. Ibedpfxov Nma Rs Aquoc

Leto izdelave: 2025, stanje: novo, The RS-9 has been specifically developed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine with which it will be used. The shredder enables fast and safe shredding of paper, which can be taken directly from the die-cutting machine, allowing for easy transport to the baler via a conveyor system. The RS-9 shredder is designed to reduce waste from a die-cutting machine for straightforward transport via a belt system. Ijdpoiklxbjfx Aquebc Our shredder is simple to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 also features retractable shafts, ensuring worker safety and extending the service life of the device. The machine is fitted with a frequency inverter that allows for soft starting and precise motor control. Feel free to contact us.

Stanje: novo, Leto izdelave: 2025, LABELshrink tunnel. Basic version with conveyor for flawlessly shrunk shrink labels on bottles/cans/jars without any wrinkling. Air blowers in each section can be individually controlled. - Specifications: Max. product size: Ø 100 x H 280 mm; Tunnel size: L 1500 x W 120 x H 300 mm; Machine dimensions: L 1800 x W 600 x H 1550 mm; Max. output: 200 containers/minute; Power supply: 380V, 9kW. Ibjdpfx Aqjv Nlw Ueujc Please note that our new prices are often lower than the typical used equipment prices. Feel free to contact us and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock at all times. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, LABELshrink tunnel. Basic version with conveyor for precisely shrunk shrink labels applied solely to lids. Suitable for bottles/cans/jars without any surface rippling. Equipped with two blowers for adjustable airflow, with both slow and turbo modes. Specifications: Max. product size: Ø 120 x H400 mm; Tunnel dimensions: L1000 x W150 x H400 mm; Machine dimensions: L1530 x W400 x H1300 mm; Max. output: 200 containers/minute; Power: 380V, 9.0kW. Ibsdpjv Nlw Ijfx Aquec Please note that our new machines are often priced below typical used equipment prices. Simply contact us and let us know your packaging requirements. As a rule, 30–50 different new machines are always immediately available from stock. For custom-built equipment, we also offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Flow wrapper for high-speed packaging of smaller products in pillow bags with longitudinal seams. The flowpack packaging machine is suitable for packaging single or multiple, dry, uniform or non-uniform products. A special product infeed system is installed upstream of the flow wrapper. Sorting and feeding the products in line to the carriers (infeed table of the flow wrapper) is handled by six side belts driven by servomotors. This means the products do not need to be placed individually by hand, which provides a significant production advantage and substantially improves the flow wrapper’s cost-effectiveness. AMTEC’s flowpack packaging machine is perfectly matched to the bag length with regard to the rotating knives and their diameter, resulting in optimized speed performance. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; Bag dimensions: L (55-85) x W (15-60) x H (5-30) mm; Number of rotary knives: 4 pieces; Max. machine cycle rate in idle mode: 800 cycles/minute; Film type: BOPP/OPP (clear, printed, or laminated); Power: 380V, 9.5 kW; Machine dimensions: L 9734 x W 1110 x H 1924 mm; Weight: 3,500 kg. Please note that our new prices are often below typical used prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with a full warranty. Ijdpfxsv Nlkne Aqujbc

Stanje: novo, Leto izdelave: 2025, Flow Wrapper for high-speed packaging of smaller products in pillow bags with longitudinal seams. The flow pack packaging machine is suitable for packaging individual or multiple dry, uniform, or irregularly shaped products. A special feeding system is positioned ahead of the flow wrapper. Sorting and conveying the products in sequence to the flight bars (infeed conveyor for flow wrapper) is carried out by six side-running belts powered by servo motors. This eliminates the need for manual single-piece placement, resulting in significant production advantages and greatly contributing to the flow wrapper's efficiency. AMTEC’s flow pack machine is precisely matched to the bag length with regard to the rotating knives and their diameter, ensuring optimized speed as a result. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15–60) x H (5–30) mm; Bag dimensions: L (60–100) x W (15–60) x H (5–30) mm; Number of rotating knives: 4 units; max. machine cycle rate (no load): 800 cycles/min; Suitable film types: BOPP/OPP (transparent, printed or laminated); Power supply: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924 mm; Weight: 3500kg. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - Generally, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at around 3 weeks. - All machines are available with a full warranty. Ibedpfx Aqjv Nlkueusc

Stanje: novo, Leto izdelave: 2025, Flow wrapper for high-speed packaging of small products in fin-seal (flow pack) bags with longitudinal seals. The flow pack packaging machine is suitable for packing individual or multiple, dry, uniform or irregularly shaped products. A dedicated feeding system is positioned upstream of the flow wrapper. Sorting and in-line feeding of products to the infeed conveyors (flow wrapper infeed table) is handled by six servo-driven side belts. This eliminates the need for manual placement of individual products, providing a significant production advantage and greatly improving the flow wrapper’s cost-effectiveness. AMTEC’s flow pack packaging machine features rotating knives, with diameters perfectly matched to the bag length, resulting in optimised speed and performance. Ibodpfxsv Nlkzj Aqujc - Specifications: - Suitable product dimensions: L (depending on bag length) x W (15–60) x H (5–30) mm - Bag dimensions: L (48–60) x W (15–60) x H (5–30) mm - Number of rotary knives: 5 units - Max. idle machine cycles: 1,000 cycles/minute - Film material: BOPP/OPP (transparent, printed, or laminated) - Power: 380V, 9.5kW - Machine dimensions: L 9,734 x W 1,110 x H 1,924 mm - Weight: 3,500 kg Please note: our new machine prices are often lower than typical used machine prices. Simply send us your packaging requirements for a quotation. We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times, starting from around 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Angle welding machine for shrink film packaging of extremely large products, semi-automatic (manual product feed, automatic discharge) with a manually operated sealing mechanism for the angle welding machine (no compressed air required). Suitable in combination with the AMTEC SHRINKtunnel POF-XXTRA (for very large/wide products). – Specifications: 380V, 5.0kW; max. machine cycle rate (idle): 15 cycles/minute; max. product dimensions (mm): L1750 x W960 x H280; sealing bar length: L1850 x W1050mm; max. product weight: depends on the dimensions of the product and how the weight is distributed on the infeed table; machine dimensions: L3640 x W1715 x H1510mm; weight (net/gross) 450/550kg. For heavy products, we are happy to produce sample packaging to confirm whether the machine can process your products or, if necessary, to offer you alternative systems for your packaging tasks. With semi-automatic machines, the cycle rate should also be considered an operator-dependent experience value. Iodpfx Aev Nl Adequobc Please note that our new prices are often lower than typical used prices. Feel free to contact us and let us know about your packaging requirements. – We usually have 30–50 different new machines immediately available from stock. For machines built to customer specifications, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, XL version of the vertically operating L-bar shrink sealer for shrink packaging. Ideal for use in combination with the AMTEC SHRINKtunnel POF-XL (High-Speed). – Specifications: max. machine cycle rate in idle mode: 35 cycles/minute. The sealing unit operates in an extremely stable vertical position thanks to its 4-column design, applying very even pressure to the shrink film. Excellent sealing results with minimal creasing. Sealing frame height and pressure are adjustable. Easily adjustable perforation module. Optional accessories available: feeding systems for CD, DVD, etc. – Specifications: packaging size: (L + H) max. 800 mm where H < 180 mm and (W + H) max. 650 mm where H < 180 mm; sealing blade lengths: longitudinal = 903 mm, cross = 750 mm; power supply: 220V/3.5kW; machine dimensions and weight: L2430 x W1550 x H1300 mm, 930 kg. Please note that our new prices are often lower than typical used equipment prices. Please do not hesitate to contact us and let us know about your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines are supplied with a full warranty. Ibjdpfx Aqsv Nl A Deuoc

Stanje: novo, Leto izdelave: 2025, PRO version of the vertically operating L-sealer for shrink packaging. Ideal in combination with the AMTEC SHRINKtunnel POF-XL (High-Speed) PRO version. The machine operates in an extremely stable vertical position, thanks to its 4-column design, and applies very even pressure to the shrink film. Delivers excellent sealing results with minimal wrinkling. The height and pressure of the sealing frame are adjustable. Easily adjustable perforation module. Optional feed systems available for CD, DVD, etc. – Specifications: Max. machine cycle rate (idle): 40 cycles/minute; Packaging dimensions: L(200-830) x W(200-630) x H(10-180), W+H Ibodpfx Aqsv Nl D Ieuoc

Stanje: novo, Leto izdelave: 2025, PRO version of the vertically-operating L-sealer for shrink packaging. Ideally used in combination with the AMTEC SHRINKtunnel POF-XXL (High-Speed) PRO version. Thanks to its 4-column design, the machine works in an extremely stable vertical position and applies uniform pressure on the shrink film. This ensures excellent sealing results with minimal wrinkling. Both the height and pressure of the sealing frame are adjustable. Easily adjustable perforation module. Optional feed systems for CD, DVD, etc. are available. – Specifications: maximum idle machine cycle rate: 40 cycles/minute; packaging dimensions: L(200-830)xW(200-630)xH(10-300), W+H Ibodpfx Ajv Nl D Ujquoc

Stanje: novo, Leto izdelave: 2025, Fully automatic continuous side sealer for fast and reliable product flow via a synchronized sealing unit. PRO version includes external feeding conveyor and lateral guide rails for multi-pack format products. Various guide rail systems are available depending on product height and shape. Touchscreen control panel for easy operation. No-product automatic stop system. Quick and easy format changeover. Cost reduction through lower film consumption. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO version. Can also be combined with the POF-PE shrink tunnel. - Specifications: maximum machine cycle rate (idle): 70 cycles/minute; max. packaging size: L(80-700)xW(80-230)xH(10-180)mm; sealing blade length: 380mm; 220V, 5 kW; 6 bar, 0.6m³; machine dimensions: L2295xW1160xH1370mm. Please note that our new machine prices are often lower than typical used machine prices. Feel free to inquire and tell us about your packaging requirements. - We usually have 30-50 different new machines available for immediate delivery from stock. For custom-manufactured machines we offer very short delivery times from approx. 3 weeks. - All machines come with full warranty. Ibodsv Nl E Sepfx Aquoc

Stanje: novo, Leto izdelave: 2025, Flow wrapper for high-speed packaging of smaller products in longitudinal seam pillow bags. The flow pack packaging machine is suitable for packing single or multiple, dry, uniform or non-uniform products. A specialized infeed system is installed upstream of the flow wrapper. Sorting and aligning the products in a row with the pusher chains (flow wrapper infeed table) is handled by six side conveyors driven by servo motors. This eliminates the need for manual placement of individual products, delivering a significant production advantage and contributing notably to the cost-effectiveness of the flow wrapper. AMTEC’s flow pack packaging machine features rotary knives and diameters that are perfectly matched to the bag length, optimizing the resulting packaging speed. Ibsdpov Nli Refx Aqusc – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; bag dimensions: L (90-220) x W (15-60) x H (5-30) mm; number of rotary knives: 2 pcs.; maximum machine cycle rate (no load): 400 cycles/minute; film types: BOPP/OPP (transparent, printed or laminated); power supply: 380V, 9.5kW; machine dimensions: L9734 x W1110 x H1924 mm; weight: 3500 kg. Please note that our new prices often undercut typical used machine prices. Don't hesitate to inquire and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty.