Čistilec Delov Z Vročo Vodo nakup rabljenega (48.779)

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type L102 Fully automatic hot water washing machine for parts, featuring basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Complete system insulation included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 250 kg Bjdpfx Ajdz Dy Hjcmsdc - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature – 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Washing time timer freely adjustable (minutes and hours) Entire cleaning machine (inner workings and exterior cladding) manufactured from stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking mechanism Bath cover with fine filter (2,000 micron) 2 suction filters for pump protection Operating hours counter Steam extraction including condensate recirculation Parts washing machine is as new (pilot plant/technical center machine) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!! This offer is subject to change and non-binding. Modifications, errors, and prior sale expressly reserved.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Parts Cleaning Machine / Spray Cleaning System Type L102 Fully automatic hot water parts washer with basket drive via gear motor, 2 stainless steel washing pumps (Make: Lowara), and 2 three-sided circulating spray systems. Complete system insulation included. - Basket diameter: 910 mm - Usable height: 520 mm - Maximum loading weight: 250 kg - Spray pressure: 2x 3 bar - Tank capacity: 175 liters - Heating: electrically adjustable (room temperature to 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Bdsdpfx Acehl H Uusmoc Empty weight: approx. 300 kg Wash time can be freely set (minutes and hours) Entire cleaning machine (internal components and outer housing) made of stainless steel 1.4301 Water circulation system and loading basket made of stainless steel 1.4301 Complete system insulation (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking mechanism Bath cover with fine filter (2,000 micron) 2 suction filters for pump protection Operating hours counter Steam vapor extraction including condensate return Parts washer is in near-new condition (test/demo unit) This offer is non-binding and subject to prior sale. Changes, errors, and intermediate sale expressly reserved.

Stanje: dober (rabljeno), Top-maintained Falch Trail Jet 15 Bdsdpouvd N Sefx Acmec 500 bar 1,790 hours Year of manufacture: 2019 Purchased from Falch Hot water unit Regularly serviced by Falch Various accessories available optionally

Stanje: skoraj kot novo (rabljeno), Falch Trail Jet 15, 06/2024, kot nov z garancijo, 232 delovnih ur Bdedpfxowz Scaj Acmsc

Stanje: skoraj kot novo (rabljeno),

Stanje: dober (rabljeno), Leto proizvodnje 2008, 3160 delovnih ur, servis opravljen na novo, zelo dobro vzdrževan, NOVA HD črpalka pri FALCH-u. Bdodpfx Acjwy Ellemjc

Leto izdelave: 2014, stanje: dober (rabljeno), Cryovac STE96-600 tunel za krčenje s toplo vodo Serijska številka: SN00422 Bdsdpemx Sknofx Acmec Leto: 2014, tunel iz nerjavečega jekla za krčenje s toplo vodo in paro, dimenzije transportnega traku 1300 mm x 600 mm, največja višina izdelka 220 mm, upravljanje preko HMI zaslona na dotik, 3-fazni priklop.

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Bodpfefh Tmmox Acmsdc Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: rabljeno, Leto izdelave: 1999, Clamping force: 3150 kN Mounting platen: 900x900 mm Tie-bar distance: 550x550 mm Machine weight: approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Ejector stroke: 120 mm Mold height: 300–700 mm Tie-bar diameter: 110 mm Bdsdsvfhrtspfx Acmec Injection force: 158 kN Injection stroke: 250 mm Injection plunger diameter: 70, 80, 90, 100 mm Casting volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Eject stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system, suitable for magnesium alloy processing. Available from used machinery stock. The machine is equipped with a Rauch electric furnace, type MMO 315E. Spray device not included. Manufacturer’s recommendation: repair or overhaul at the refurbishment facility. Scope of work can be agreed upon as required.

Stanje: novo, Leto izdelave: 2024, Clamping force: 2,200 kN Clamping plate: 755 x 755 mm Tie bar spacing: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mold height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific casting pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1,078 cm² Return stroke: 230 mm Machine equipment: 1.1.1 Motorized safety door on casting side right 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector assistance packages 2.1.2 Core pull device M2 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting assistance packages Bdsdpfx Asvvx Hcscmjc 3.0.1.2 Casting assistance package Technology 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified plunger removal 3.5.2 Electric nozzle and casting container heating 3.5.3 Pluggable connections for electric nozzle and casting container heating 4.3.1 Additional heat exchanger 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.4 Integrated water circuit control 2+8 circuits 5.1.1 Machine control DATADIALOG – Shot Stop 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for part removal 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum device 6.1.7 Frech interface for doorman function 6.5.2 RSD equipment package with switch 7.2.3.3 Spraymotion 811 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent tank TD 20 7.4.0.6 Spray bar CR 458

Stanje: rabljeno, Technical details: Bsdpeu N Afyofx Acmjdc Voltage: 360–730 V / 50 Hz Approximate machine weight: 0.150 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 1 rabljeni kotel za vročo vodo ----- - nameščen na okvirju – Tip: UT-L 14 Proizvajalec: LOOS Moč: 1.500 kW Dovoljeni obratovalni tlak: 6,0 bar Bsdpfx Asyrnhljcmjdc Preskusni tlak: 9,6 bar Dovoljena izhodna temperatura: 110° C Prostornina vode cca: 1.700 l Letnik izdelave: 2005 CE-oznaka: 0085 Opremljen s kombiniranim gorilnikom Weishaupt, tip GL8 / 1-D, moč na olje 65-191 kg/h, moč na plin 400 – 2275 kW ter s krmilno omaro. Dimenzije (približno): Premer z izolacijo: 1.500 mm Višina: 2.000 mm Dolžina: 3.400 mm Dolžina z gorilnikom: 4.600 mm Transportna teža: 3,5 t

Leto izdelave: 2023, stanje: novo, INTERSONIK ROBOWASH zagotavlja učinkovite rešitve za pranje v serijski proizvodnji kovinske industrije! Popolni sistemi za pranje delov za razmaščevanje in natančno čiščenje. S samodejnimi kartezijanskimi transportnimi sistemi je v industrijskem pranju zagotovljena popolna avtomatizacija, sam postopek pa poteka izjemno hitro in brez potrebe po operaterju. Področja uporabe: ► Čiščenje površin pred postopki lakiranja in barvanja ► V avtomobilski industriji za občutljivo čiščenje batov, ventilov, bloka motorja, blažilnikov in vseh drugih rezervnih delov ► Čiščenje obdelovancev, armatur, instalacijskih delov ► Čiščenje vilic, žlic, nožev, kljuk, podstavkov in vseh kovinskih izdelkov ter dodatkov ► Čiščenje rezervnih delov za hladilnike, pomivalne stroje, pečice ipd. ► Čiščenje medicinskih in kirurških instrumentov ► Čiščenje v elektronski industriji in čiščenje tiskanih vezij (PCB) Prednosti: ► Natančno odstranjevanje olja, ostružkov, polirnih ostankov in industrijskih nečistoč ► Površina je po pranju čista in odporna proti koroziji ► Zelo hitro in varno delovanje, brez potrebe po operaterju Postopki delovanja: ► Predpranje ► Ultrazvočno pranje ► Izpiranje Bdsdpfod I A A Sex Acmsc ► Pasivacija ► Sušenje Idealno za avtomobilsko in kovinsko predelovalno industrijo ultrazvočna čistilna linija, robotski prenosni ultrazvočni pralnik, lakirna linija, robotsko ultrazvočno pranje, pranje delov Za dodatne informacije in referenčni seznam nas prosimo kontaktirajte.

Leto izdelave: 2023, stanje: novo, Ultrazvočni čistilec s PLC krmiljenjem, posebej zasnovan za medicinske potrebe. Kapaciteta: 50 litrov Samodejno polnjenje: Da Samodejno doziranje: Da Bdsdpfjfg Eqwsx Acmoc Pokrov: Pnevmatski bat Programabilen: Da, s pomočjo PLC Kontrola nivoja tekočine: Da ultrazvočni čistilec, ultrazvočni razmaščevalnik, ultrazvočna pralna naprava, manjši ultrazvočni pralni stroj, medicinski ultrazvočni čistilec, avtomobilska industrija

Stanje: rabljeno, Leto izdelave: 2000, Clamping force 900 kN Clamping plate 540x540 mm Distance between tie bars 350x350 mm Machine weight approx. 5.5 t Clamping stroke 280 mm Ejector force 60 kN Ejector stroke 70 mm Mould height 160-400 mm Tie bar diameter 65 mm Bdedpjyzt D Esfx Acmoc Injection force 75 kN Injection stroke 130 mm Injection plunger diameter 50, 55, 60 mm Injection volume (DIN 24480) 119, 163, 214 cm³ Specific injection pressure 380, 315, 265 kp/cm² Corresponding parting face 236, 285, 340 cm² Withdraw stroke 150 mm Fully overhauled DAW 80 GO die casting machine with DataLogic control for use with zinc alloys. Excerpt from the general overhaul: - Machine upgrade with new control cabinet and new operator panel, including replacement of all electrical wiring - Renewal of hydraulics (blocks and valves) - Clamping unit overhaul Detailed information upon request The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Chute cover at machine base (straight) - Standing operator panel - 1.0.2 Chute cover at machine base - 3.2.4 Multi-chamber holding and melting furnace with TOC pump - 3.2.1 Furnace control cabinet for furnace type Z - 4.0.1 Use of water-glycol - 4.2. (side) GO - 6.1.3.1 Wired signal interface for part removal (DISPO10) - 6.5.2 Equipment package RSD with switch - 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit - 7.3.1 Release agent tank TD 20 - 7.4.0.3 Spray bar CR 275 Further options can be offered as agreed.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Dynajet 500th Visokotlačni čistilec Leto izdelave: 2018 Bdsdpfoyigr Uox Acmjc Maksimalno temperaturno območje: 95°C Znamka: Dynajet Mobilen: da Serijska številka: 62005720 Tip: 500th Maksimalni delovni tlak: 500 bar Z daljinskim upravljanjem; vodni rezervoar 1000 l; lastna teža 1420 kg; pribl. 30 m visokotlačne cevi; pribl. 25 m polnilne cevi; 597 obratovalnih ur; testiran in delujoč

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Cooling capacity at water supply/return temperature of 15/10°C: 2.3/2.1 kW Flow rate: 0.5 m³/h Electrical connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Bodpfx Asr Ezdrecmedc Weight: 160 kg Water connections reduced to 1/2".

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 20618, Hot Foil Stamping Machine American Supply HFS, Year 2006 - Serial No. 20618 Hot stamping area max. 80 x 150 mm Bdjdpfxjup Eime Acmsc Maximum pressure 600 kg Online video inspection via Skype video We would be delighted to welcome your visit – more machines available from stock Available immediately – machine can be inspected Located in Emskirchen / Nuremberg – test run possible

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal Bdedpfx Acjiu Smbjmjc 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: novo, Leto izdelave: 2025, Clamping force: 240 kN Bdjdpfxjx Hp E As Acmec Clamping plate: 380x380 mm Distance between columns: 250x250 mm Machine weight: approx. 3.0 t Clamping stroke: 180 mm Ejector force: 28 kN Ejector stroke: 50 mm Mould height: 120–300 mm Column diameter: 45 mm Casting force: 43 kN Casting stroke: 85 mm Casting piston diameter: 36, 40, 45 mm Casting volume (DIN 24480): 47, 63, 87 cm³ Specific injection pressure: 420, 340, 270 daN/cm² Corresponding parting plane: 56, 70, 88 cm² Eject stroke: 150 mm Machine Equipment 1.0.2 Clamping unit cover on the base frame for scale/chute 1.0.3 Small parts cover in the base frame 1.1.0 Motorised safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Internal machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment for clamping unit 3.0.1.2 Casting assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified casting piston removal 3.4.6 Casting piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 3.5.3 Plug-in connectors for electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance benefits package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction unit DISPO10 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum equipment 6.3.1.1 Control unit with visualisation on support arm 6.5.2 RSD equipment package with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.1 Spray bar CR 155

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Bodpfx Asvxlufecmsdc Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Ejector stroke (decompression): 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.

Stanje: rabljeno, Leto izdelave: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Tie bar distance: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mold height: 120-350 mm Tie bar diameter: 56 mm Die casting force: 55 kN Die casting stroke: 130 mm Plunger diameter: 45, 50, 55 mm Bodpfx Acotuxmyemodc Casting volume (DIN 24480): 76, 121, 165 cm² Specific casting pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Recoil stroke: 150 mm Used machine DAW 50 as the basis for a general overhaul, excluding control cabinet, melting furnace and furnace cabinet. A full overhaul can be optionally performed at the manufacturer’s refurbishment facility. The scope of this overhaul can be defined upon request.

Stanje: novo, Leto izdelave: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mold height: 160–400 mm Tie bar diameter: 65 mm Injection force: 78 kN Injection stroke: 130 mm Injection piston diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 bar Corresponding parting plane: 226, 274, 326 cm² Ejection stroke: 220 mm Machine Features: 1.0.2 Clamping unit cover on base frame for scale / chute 1.1.0 Motorized safety door on injection side (left) 1.4.0 Machine mounts 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector advantage package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit Bjdpjr Hwf Aefx Acmsdc 3.0.1 Injection assistance advantage package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill injection system 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop in return stroke 3.5.2 Electric nozzle and shot chamber heating 3.5.3 Plug-in connectors for electric nozzle and shot chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 DATADIALOG–RC machine control 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualization on swing arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.3 Spray rail CR 275

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, A water-sprayed wet scrubber system by Rippert in stainless steel design is available for painting applications. Working width: 5000 mm, exhaust air capacity: 18,000 m³/h, water volume: 700 l. Includes stainless steel chimney. On-site inspection possible. Bdsdpfx Aewydgzscmoc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Cooling capacity: 420 kW, connected load: 7.1 kVA, weight: 4.9 t, equipped with Baltimore Aircoil International TXV 237R cooling tower and Chemie + Wasser Lohbeck DS6 blowdown control system, with documentation. On-site inspection possible. Bdodpeu Rn Agjfx Acmsc