Stapler Center Fritz Gmbh Priklopnik Za Težke Obremenitve nakup rabljenega (117.492)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7024NL256160890J, največja hitrost vretena: 10.000 obr/min, pomik osi Y: 200 mm, največja hitrost vrtenja: 4.000 obr/min, Premer palice (maks.): 80 mm, razdalja med središči: 700 mm, Condition: Ball screw drives on X, Y, and Z axes new + major maintenance package carried out approx. one year ago (machine has not been in use since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar diameter: 80 mm Mount: MT5, live center Without center point Turret: 12 stations, bolt-on turret Projection length for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for center point Chip and coolant system Scraper-type chip conveyor with magnetic separation, discharge height approx. 1,000 mm Coolant system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air release system for toolholder sleeves Compressed air release system for tailstock center point Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% DC / 50% DC / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal light: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for DMG Mori Seiki gantry robot Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Lodjy A Icrepfx Al Nsaa Note: The machine is supplied without chuck, tool presetter and workholding devices.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 3.048 mm, širina obdelovanca (maks.): 1.524 mm, najv. debelina pločevine: 3 mm, obremenitev mize: 5.000 kg, The control system and software of the machine have been renewed! TECHNICAL DETAILS Sheet thickness for blanks with tensile strength 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 40 presses with max. force of 7 t & 4 presses with max. force of 26 t Lower cylinder force max.: 6 t Double punch force: 12 t (2 hydraulic punches) Input panel length min.: 370 mm Input panel length max.: 3,048 mm Input panel width min.: 300 mm Input panel width max.: 1,524 mm Input panel diagonal max.: 3,408 mm Output panel length min.: 250 mm Output panel length max.: 3,048 mm Output panel width min.: 60 mm Output panel width max.: 1,524 mm Vertical stroke lifting table: 550 mm Usable carrying capacity of lifting table: 5,000 kg Minimum dimensions of transportable sheet stack: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Powered roller conveyor PRL3814F Universal destacking device DUF15 Punch head H2 Oil-hydraulic power unit C1515 (3-part pump unit) Lower cylinder EI09 Laodpfx Alsy Emr Ds Nja Double rotary punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 MHz WINDOWS NT Documentation

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.500 mm, premer struženja: 500 mm, izvrtina vretena: 80 mm, pomik osi Y: 260 mm, • Fanuc 31i-B5 CNC control • 15" color LCD display • Y-axis travel: 260 mm (+/- 130 mm) • B-axis swivel range: 230° (+/- 115°) • Milling spindle drive power: 15/22 kW • Maximum milling spindle speed: 12,000 rpm • Main spindle drive power: 22/26 kW • Main spindle speed: 4,000 rpm • Spindle nose: A2-8 • Main spindle bar capacity: 80 mm • Counter spindle drive power: 15/22 kW • Counter spindle speed: 4,000 rpm • Spindle nose: A2-8 • Direct encoder feedback on X1, Y1, Z1-axis • 12-station turret • Milling spindle with B-axis • Y-axis • HOWA clamping cylinder and chuck (L) • HOWA clamping cylinder and chuck (R) • 2 C-axes incl. disc brake • M-function open/close chuck • Foot switch for chuck • Coolant system with 4 pumps Laedpfx Alewpkp Ij Nsa • Automatic central lubrication • Automatic machine shut-off • Right-side hinge conveyor • LED work area lighting • 1 set of machine documentation • CE specification FANUC 19" HMI Touch Panel iH Pro (instead of standard 15" touch panel) Tool holder: Capto C6 Tool positions: 80 Tool monitoring system Raku Raku 1. Tool management 2. Load monitoring 3. Compensation management 4. Operating information KITAGAWA power chuck 3-jaw BB210 • Bore: 81 mm • Jaw stroke (diameter): 8.8 mm • Base jaw serration: 1.5 mm x 60° • Max. speed: 4,500 rpm KITAGAWA power chuck main spindle Hydraulic hollow clamping cylinder SS1881K • Bore: 81 mm • Piston stroke: 25 mm • Max. speed: 4,800 rpm SMW power chuck Hydraulic solid clamping cylinder SIN-S 125 • Max. pressure: 70 bar • Pulling force at 40 bar: 41 kN • Max. speed: 6,000 rpm Bar feeder interface incl. "Optional block skip" Three-color signal lamp Manual tool setter Integrated parts unloader for counter spindle • Max. diameter: 80 mm • Max. length: 200 mm • Max. weight: 3 kg Automatic work area door Band switch for automatic work area door 120 kVA transformer TMX-4000ST Machining condition selecting function Kinematic setup procedure Kinematic adjustment FANUC via iHMI - Renishaw touch probe RMP600 - Macro software - Amplifier - C6 holder - Calibration sphere - Interface Gear skiving function 3D collision avoidance system KNOLL KF300/1800 70 bar with alpha 9-E inline cooler - Clean water tank: 1,800 l capacity - 1 x LP pump: 150 l/min / 3.1 bar - 2 x MP pumps: 40 l/min / 7 bar - 1 x HP pump: 20 l/min / 70 bar - 1 x frequency converter for HP pump - 1 x dual switching filter - 1 x alpha 9-E inline cooler - 7 pressure stages KNOLL scraper conveyor 500 K-1 Conveying height: 1,700 mm Discharge height above floor: 1,150 mm

Stanje: dober (rabljeno), Kód: 0321 Znamka: SCM Model: MULTIFLEX C - CE Standard Avtomatski delovni center za izdelavo okenskih okvirjev za čepovanje, profiliranje in konturiranje – maks. debelina obdelovanca 140 mm – CE standard Tehnični podatki Avtomatski voziček z zagozdilcem Maks. delovna dolžina: 2800 mm Min./maks. debelina obdelovanca: 30/140 mm Premer žage za odrezovanje koncev: 400 mm – motor 4 KM Lasdsytn U Iopfx Al Nja Uporabna dolžina čepilnega vretena: 320 mm – motor 10 KM Premer vretena: 50 mm Maks. premer orodja: 350 mm Profilirna vretena: 1. proticepilno profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm 2. profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm Min. in maks. premer orodij profilnih vret: 100/220 mm Premer profilnih vreten: 50 mm Orodna skupina: Zuani Spremenljiva hitrost pomika Skupina za vračanje zasteklitvenih letvic – motor 3 KM – premer odsesovalnega priključka 50 mm Skupne mere: 2400 x 3300 x 2000 mm (v x š x g) Teža: 2200 kg

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Turning diameter: 120 mm Turning length: 100 mm Control: Fanuc Main spindle 1 power: 7.5 kW Main spindle 1 speed: 4,500 rpm Main spindle 2 power: 7.5 kW Main spindle 2 speed: 4,500 rpm Distance between spindle noses: 600 mm Turret no. 1 stations / driven: 15/15 Driven tool power, turret 1: 2.7 kW Driven tool speed, turret 1: 4,000 rpm Turret no. 2 stations / driven: 15/15 Driven tool power, turret 2: 2.7 kW Driven tool speed, turret 2: 4,000 rpm Travel paths X/Z, turret 1: 250 / 300 mm Travel paths X/Z, turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm Laedpfxsy D Nxdj Al Noa Power chuck: 165 mm Spindle bore spindle 1: 62 mm Spindle bore spindle 2: 62 mm Space requirement approx.: 3700 x 2300 x 3000 mm Machine weight approx.: 5,600 kg Used CNC opposing spindle turning center with gantry loader - 165 mm chuck on both spindles - 2x 15-position turret with driven tools - Automatic workpiece loader with turning station 14-position magazine on the left Maximum part size: Ø 120 x 100 mm Double gripper capacity: 2 x 3 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, HOLZ-HER EVOLUTION 7405 4MAT – Vertical CNC Machining Center Year of manufacture: 2022 Operating hours: 4841 h Availability: October 2026 High-performance vertical CNC machining center, designed for drilling, milling, and grooving operations on wood panels and wood-based materials. Main features - Vertical machining with high-precision vacuum handling system - Rear workpiece clamping for complete perimeter processing without reclamping - Automatic CNC adjustment according to panel thickness (8 – 70 mm) - Panel measurement system via laser Technical data - Working length: 200 – 3200 mm - Working height (Y): 70 – 1200 mm - Panel thickness: 8 – 70 mm - Maximum speed: Vector: 68 m/min Axes: X 25 – Y 60 – Z 20 m/min Lajdpfxjy D Sx Hj Al Nea Work units - Electrospindle 10.3 kW (air cooled) - Tool interface HSK-F63 - 6-position tool magazine - ChipControl system for spindle protection - XL drilling group – 19 spindles 13 vertical 6 horizontal Software and controls - Complete CAMPUS V7 EVOLUTION CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control panel - USB port Equipment - ECO vacuum system (8 m³/h) - Automatic centralized lubrication - Retrofit kit included

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.085 h, premer struženja: 240 mm, moč vretenovega motorja: 11.000 W, hitrost vretena (min.): 3.200 obr/min, izvrtina vretena: 90 mm, potovalna razdalja osi X: 142 mm, pomik po osi Z: 165 mm, hitro pomikanje X-os: 24 m/min, hitri pomik na osi Z: 24 m/min, največja hitrost vrtenja: 2.500 obr/min, vrsta vhodnega toka: trifazni, skupna višina: 2.700 mm, skupna dolžina: 3.590 mm, skupna širina: 2.610 mm, skupna masa: 5.200 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Frontalni dvojvretenasti stružniški center. Z dvema vretenoma, dvema revolverskima glavama, z gnanimi orodji in C-osjo, dva linearna robota. Stroj je praktično nov, uporabljali smo ga le 2000 ur. Gre za popolno verzijo stroja, z dvema stranskima podajalnikoma. Vpenjalna puša + 3-čeljustne vpenjalne glave. Verižni transporter. FANUC 0iTD krmiljenje. Stroj je bil kot nov kupljen pri Takisawa zastopniku na Madžarskem (SZIMKER ZRT). RAKU-RAKU MONITOR. Laedpferzq N Uox Al Nsa

Stanje: novo, Leto izdelave: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic 3-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel with wall thickness up to 3 mm – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous processing. Maximum machining length: 3,000 mm Maximum clamping length for profiles: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optionally 8 kW) Tool holder: SK30 (optionally HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirement including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Enclosed tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear working area safeguarded by a safety fence with access door Laedpfjy Afxdsx Al Noa - 6 pneumatic clamp bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous processing

Stanje: novo, Leto izdelave: 2025, Ref. No.: 10465 Manufacturer: IGREK Model: FR 1000 T Year of manufacture: 2025 Control type: CNC control Control system: Siemens / Heidenhain Location: Istanbul Country of origin: Türkiye X-axis travel: 1350 mm Y-axis travel: 1500 mm Z-axis travel: 900 mm B-axis: ° C-axis: 360° Spindle taper: HSK-T100 Rotary table diameter: 1000 mm Table load capacity: 2000 kg Tool magazine: 48 pcs. Spindle speed: 15,000 rpm Rapid traverse X/Y/Z: 48 m/min Spindle motor power: 35 kW Max. spindle torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine height: 4050 mm Machine weight approx.: 40 t Additional information: IGREK FR 1000 T – Compact Precision for Demanding Applications The IGREK FR 1000 T is a CNC-controlled turning and milling center with 5-axis simultaneous machining, combining cutting-edge technology in a compact design. Manufactured in 2024, this machine is immediately available and ideally suited for the precise machining of medium-sized workpieces across various industries. Key features: Compact Power: With axis travels of 1,350 mm (X), 1,500 mm (Y), and 900 mm (Z), and a table load capacity of up to 2,000 kg, the machine offers optimal conditions for flexible applications. 5-axis Simultaneous Machining: The B-axis (° / °) and C-axis (360°) enable precise processing of even the most complex geometries. High-performance Spindle: The spindle reaches speeds of up to 15,000 rpm, maximum torque of 220 Nm, and a drive power of 35 kW – ideal for demanding milling operations. Extended Capacity: A tool magazine with 48 positions and HSK-T100 taper allow for quick changes and efficient processes. Top-tier Speed: Rapid traverse rates of 48 m/min on all axes minimize machining times. Laedjxmd S Ispfx Al Nsa Technical Data Overview: Axis Travels: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tonnes Additional Benefits: Thanks to state-of-the-art controls (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-piece and series production. The manufacturer offers international service and comprehensive warranty coverage. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for further information!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, obratovalne ure: 11.975 h, Obdelovani materiali: mehko jeklo, nerjavno jeklo, aluminijeve zlitine, baker, medenina. Lsdpfsy Ddqnsx Al Neaa Samodejna prečna menjava palet za pločevino – format pločevine 3000×1500 Dodatna oprema – Active Weld: optična naprava za iskanje zvara na ceveh okrogle, kvadratne, pravokotne ali ovalne oblike – Dodatni podajalnik za občutljive cevi – Motorizirana čelna zbiralna miza za cevi – največja dolžina 4500 mm – 2D rezalna glava z: Active Focus – samodejna nastavitev žarišča Active Beem – samodejna sprememba premera laserskega žarka – Senzorji za samodejni nadzor temperature zaščitnega stekla – Fiber Booster – Naprava za samodejno menjavo šob z 18 pozicijami – Programska oprema Fly Cut

Stanje: rabljeno, Skladišče okovja da_da Striffler miza za okensko krilo z okovjem ----- - z avtomatskim vijačnikom in dovajanjem vijakov - Regal za okovje - Preša za okovje Roto Lodpfjyn R Iyex Al Nsaa (tehnični podatki po navedbah proizvajalca, brez garancije!)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, dolžina mize: 1.700 mm, širina mize: 500 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Lsdpfxey D Tuve Al Nsaa Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! TEHNIČNE PODROBNOSTI Število delovnih miz: 4 Dimenzije odlagalne površine: 1.700 x 500 mm Dimenzije na delovno mizo: 1.500 x 730 mm PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 7.500 x 1.100 x 2.700 mm Teža: 1.500 kg OPREMA Varilna vrtljiva miza (proizvajalec: RÖHM) Balansirna tehtnica Naprava za rezanje pločevine (dolžina reza: 100 mm) Vpenjalne klešče Tiskalna stiskalnica Elektrogravirni pero Primež (širina čeljusti: 150 mm) Brusila Brusni papir Škarje za pločevino (proizvajalec: FEIN) Vijaki Svedri Črke za udarno označevanje Regal za težke obremenitve brez vsebine Zunanja referenca: 25

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Laodow A Rv Iepfx Al Nsa Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Stanje: rabljeno, Leto izdelave: 2020, max. workpiece length 3740 mm milling spindle 1 unit main motor 15 kW CNC control system Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of customer ----- - From a wood window production facility. - Machine is still connected and ready for demonstration - Without machining tools Laedpfx Aeyq Sztsl Nea Technical Description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Axis travel paths: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional locking mechanism for the C-axis - Boring head DH 18 6H1S: vertical boring unit with 12 spindles (7 spindles in X-direction, 5 spindles in Y-direction, slot saw in X-direction) Horizontal boring unit with 6 spindles, 4 in X-direction and 2 in Y-direction. 1 slot saw in X-direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right side of the machine stand max. tool diameter 240 mm max. tool height 370 mm - Tool change position for circular saw blade mounted on the gantry/tool changer, max. saw blade diameter 350 mm - Tool changer on the left in the machine stand with 10 tool positions. max. tool diameter 180 mm max. tool length 230/300 mm collet distance 110 mm - Disc tool changer with 24 tool positions mounted on the gantry, traveling in X-direction max. tool diameter 240 mm max. tool height 370 mm - Mobile pick-up station for chip deflector - 6 workpiece supports, s-motion, position-controlled - 2 machining zones for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved arch processing - Including all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - Software "WoodFlash" Lamello Clamex P Macro Notching Macro - "Greenline Package" for reduced energy consumption ----- Price for the above-mentioned machine on request! ----- Optional new Oppold tool set for H500: Windows Timber windows IV 68, 78 and 88 inward-opening, with changeable rebate on the side and top. Glazing rebate 20mm, frame and sash shoulder 20° bevel with loose and pre-milled glazing bead Old building timber windows IV 68, 78 and 88 inward-opening, without rain bar, with changeable rebate on side, top and bottom. Glazing rebate 20mm, frame and sash shoulder 15° bevel with hung weather bar Timber-aluminium windows (system provider: Gutmann Mira, slanted rebate system) HA IV 68, 78 and 88, inward-opening, 2 sash variants: square and slanted, changeable rebate bottom, side & top Entrance doors Timber HTIV 68, 78 and 88 with single rebate in the frame and double rebate in the sash, inward-opening, 1 sash variant, glazing rebate, without changeable rebate offset construction Timber-aluminium IV 68, 78 and 88 with single rebate in the frame and double rebate in the sash Lift-slide doors Timber-HS IV 68, 78 and 88, without frame production Timber-aluminium-HS IV 68, 78 and 88, without frame production Execution...

Stanje: rabljeno, največja dovoljena obremenitev: 12.440 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2018, dolžina tovornega prostora: 7.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 44 m³, Leto izdelave: 2018, Oprema: ABS, dvižna zadnja plošča, 2-axle TANDEM trailer 7.70 with BÄR 2,000 kg tail lift * Beverage box body EWERS with swivelling wall roof * 4-row rear cargo securing system LASI VDI 2700 * Vehicle number for customer inquiries: 4452 * Air suspension * Tail lift * EBS (Electronic Braking System) * Anti-lock braking system (ABS) No liability for printing or typographical errors. Sale only to business customers. Subject to prior sale and errors. Changes, interim sale, and errors expressly reserved. The description serves to identify the vehicle and does not constitute a warranty within the meaning of sales law. The decisive factor is the description according to the sales contract. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer. Guarantee insurance available on request through the insurer. Ledpfjxx D Srjx Al Neaa * TÜV / UVV LBW / tachograph test and OBU device installation can be arranged locally by our partners. * Export plates for 30 days All export documents can be provided as needed but must be requested individually. * TOLL registration for Toll-Collect can be booked in-house. * Free transfer from Stuttgart airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * over 200 vehicles in stock at all times

Leto izdelave: 2025, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 700 mm, skupna širina: 1.400 mm, skupna višina: 900 mm, Nerjavno jekleno pomivalno središče 1400 VRHUNSKA pomivalna miza z omarico spodaj 1400 x 700 x 900 mm (ŠxGxV) 1x korito desno, odcejalna površina levo s hrbtno galerijo z vrati/polico desno; levo odprto za pomivalni stroj vključno s stojnim ventilom in čepom za odtok Dimenzije: 1400 x 700 x 850/900 mm Lajdpfjy Ac Upex Al Nja Nerjavno pomivalno središče, kot novo!

Leto izdelave: 2017, stanje: rabljeno, Serijska št. 15-6139B, CNC krmiljenje z zaslonom na dotik, taktni dovajalni transporter, robot, proizvajalec Yaskawa, tip YR-MH00012-A00, letnik 2011, robotsko krmiljenje DX200, Teach-In terminal, izhodna proga za zaboje, dolžina 7.000 mm, krmilne/komandne omare, ohišje iz pleksi stekla, periferni agregati, strojna oprema Ledpfxoy A In Uo Al Njaa Ob predhodni prodaji si pridržujemo pravico do spremembe.

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: M1348, Mere: 255 širina x 170 globina x 254 višina Teža: 4100 kg Maks. pritisk: 400 kN (40 ton) Maks. dolžina upogibanja: 1600 mm Razdalja med stojali: 1600 mm Pomik X-osi: 600 mm Maks. hod: 290 mm Krmljene osi: X, Y, R Krmiljenje: Oprema: 4 prisloni Stanje: Originalni zaslon pokvarjen --> Nameščen in z napravo povezan drugi zaslon (deluje) Bombiranje: servomehansko pogonjen sistem Power Belt --> enakomerna porazdelitev sile Ledpfx Ajylhkyel Noaa Naprava je delujoča in v dobrem splošnem stanju.

Stanje: novo, Leto izdelave: 2026, max. workpiece length 4400 mm milling spindle: 1 unit main motor: 19.2 kW control: Beckhoff CNC machining centre MASTERWOOD 4 WIN Lsdpfx Aeyyqm Uol Noaa ---- Specially designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimum tool configuration - Simultaneous loading with 4 workpieces - Patented clamping system for optimal workpiece machining - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for switching between exterior and interior profiling - INTEGRATED window construction software, i.e. the machine does not need to (but can, of course) be controlled externally from the office by sector-specific software - Powerful 19.2 kW main motor with HSK-63 E Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Tooling available for prompt delivery upon request! Request a quotation and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! You will also find the technical description of the machine as a PDF document attached. We would be happy to take your used machine in trade at a fair price! Matching stationary or mobile extraction units available on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (Technical specifications as per manufacturer – subject to change!)

Stanje: rabljeno, največja dovoljena obremenitev: 4.600 kg, skupna masa: 6.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/2023, Leto izdelave: 2023, Oprema: žerjav, We are offering here an unused forestry trailer with crane, suitable for tractors from 70 HP upwards. The trailer is equipped with an overrun brake and does not require registration for speeds up to 25 km/h. Lajdjx Ia Svspfx Al Nsa

Leto izdelave: 2022, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 122000029, Ponujamo zelo dobro ohranjeno strojno obdelovalno središče za profile elumatec SBZ 122/75, letnik 2022. Lsdpfx Aleywku Ts Noaa Tip: 122/75 Serijska številka: 122000029 Letnik proizvodnje: 2022 Napetost: 400 V Frekvenca: 50/60 Hz Moč: 17,5 kW Tok: 25 A Največji motorni tok: 20 A Kratkostična trdnost (Ik/SCCR): 5 kA Tlak stisnjenega zraka: 7 bar Teža: 3800 kg Maksimalni premer palice: 180 mm Hitrost vretena: 6000 min⁻¹ Maksimalna hitrost: 20000 min⁻¹ Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AA100264-11 / AA100264-12, Línea BAZ y extrusión para la fabricación de largueros de automóviles compuesta por: *Máquinas de mecanizado: - Máquina Anger SP2-X2000 (n.º de máquina AA100264-11) - Máquina Anger SP2-X2000 (n.º de máquina AA100264-12) - 2x Unidades de tratamiento de refrigerante *Módulo de ensamblaje (celda robótica para largueros): - Robot 1 KUKA KR120 R3200 PA - Pinza para Robot 1 Lodpfx Asyzh Uljl Nsaa - Estación de marcaje - Robot 2 KUKA KR120 R3500 - Pinza para Robot 2 - Interfaz robot/centro de mecanizado - Unidad de limpieza de piezas - Máquina de montaje a doble pista - Robots 3 y 4 para manipulación - Sistema de cajones con insertos para piezas - Estación de atornillado - Estación de aplicación de adhesivo - Plataforma - Robot 5 - Pinza para Robot 5 - Espacio para palets - Envolvente de seguridad - Control e integración eléctrica Más información a petición.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, obratovalne ure: 36.452 h, Boley BDN 160 ZB including LNS Hydrobar bar feeder Lsdjwwbatjpfx Al Njaa manuals various tools

Stanje: rabljeno, Leto izdelave: 2011, Tehnične podrobnosti: Približna teža stroja: 11 t Stružnica Gildemeister MF Twin 65-II z avtomatizacijo podajanja Ta stroj je primeren kot nasprotno-vretenski stroj za 4-osno obdelavo na glavnem in nasprotnem vretenu, za popolno obdelavo (struženje, vrtanje, rezkanje, os Y, os B) palic in gredi. Ledpeyz Sdqefx Al Neaa

Stanje: rabljeno, prevoženi kilometri: 106.865 km, moč: 175 kW (237,93 KM), konfiguracija osi: 4x2, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, vzmetenje: zrak, Leto izdelave: 2022, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (via tel.). Mercedes-Benz Atego 1324 L 4x2 Glass Rack Flatbed with Rear Crane Lajdpfxeyfr S Is Al Nja A1K Front axle, 5.3 t, A2P Rear axle, crown wheel 390, hypoid, 9.2 t, A2Y Rear axle, narrow version, A2Z Differential lock on rear axle, A6B Axle ratio i = 4.778, B1B Electronic braking system with ABS and ASR, B1D Electronic air supply unit, medium, B1F Heater, electronic air supply unit, B2C Disc brake on front axle, drum brake on rear axle, B4A Condensate monitoring for compressed air system, B5B Trailer brake, 2-line, C3D Wheelbase 5,360 mm, C5I Mounting parts for flatbed, C6B ZF 8095 steering, C6Y Anti-roll bar, underframe, rear axle, C7H Lateral protection, C8J Splash guards integrated in mudguard, C9P Extended rear frame overhang, 600 mm, D1C Driver comfort suspension seat, D1M Co-driver’s fixed seat, standard, D2V Armrests, both sides, driver seat, D3Q Seat cover, velour, D4B Classic cockpit, D4W Electric windows, both sides, D4Y Side sunblind, driver’s side, D5Y Rubber mats, driver and co-driver side, D6F Air conditioning, D6Y Pollen filter, D7L Overhead storage compartment, 1 compartment, D7Q Raised storage compartment on engine tunnel, D7W Storage compartment behind basic box, D8A Roof hatch/ventilation flap, E0Y Battery cover, E2J Circuit breakers, E3W PSM 2nd generation, E4C Additional functions for body builder, E5A Switch No. 1 for external body electrics, E6A 24 V trailer socket, 15-pin, E6Y Reversing warning system combined with hazard warning, E7F Remote control cable for air suspension, F1P S-cab, F1X S-cab ClassicSpace, 2.30 m, tunnel, F2U ClassicSpace, F4I Cab rear wall with window, F6C Tinted windscreen, F6I Heated front mirror, F6J Main mirror, electrically adjustable, driver’s side, F7V Cab entry, two-step, F8E Central locking system, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0K Drive program economy/power, G1D Transmission G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I1C Tubeless tires 10 R 22.5 front axle, I4A Wheel configuration 4x2, I5X 13.5-tonner, I6A Flatbed chassis, I6X Air suspension, rear axle, J1A Instrument cluster, 10.4 cm, J1O Digital tachograph, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2K Speaker, 2-way system, J3N Fleetboard Eco Support, J3V Truck Data Center 7, J5S Radio with USB port and Bluetooth, J8Y Pre-installation for Truck Data Center 7, J9D Pre-installation for toll recording, J9K Universal pre-installation for multimedia use, JKUR AdBlue tank relocated to right, JKVJ Main fuel tank relocated from left to right, K0G 180 l plastic tank, left, K3S 35 l AdBlue tank, K5M Lockable tanks, K5Q Strainer for tank filler neck, K5S Protective cap for AdBlue dosing system, K7L Exhaust system, tailpipe towards vehicle center, L0A Lighting regulation according to UN-R 48.06, L0Y Extended tail light wiring harness, L1C LED daytime running lights, L1H Halogen fog lights, L1Y LED light package, front, with white indicator lenses, L1Z White indicator lenses, L2H Flashing side marker lights, L2P LED clearance lamp, L3E 1 work lamp, rear panel upper, M0Q Noise regulation according to UN-R 51.03 stage 2, M2A Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm, M4X Engine version Euro VI, E, M5V High Performance Engine Brake, N0S NA MB 60-2c, MPA deep, N-speed, N6K Transmission lock for PTO, O1X CLCS TL function integration in ASAM, O2L GU vehicle with...