Strahlhalle, močno pogonjena naprava za peskanje

Oliver Fritz GmbH & Co. KG Strahlwagen mit Antrieb

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Hjdjhzbipepfx Aagenk Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised. Hnsdof Sqckepfx Aagsk

Stanje: novo, TECHNICAL DATA Type: gas-heated pass-through chamber furnace Hedjg Dgymepfx Aagenk Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Max. loading weight: approx. 2.5 t Control system: Siemens S7

Stanje: novo, Dimenzija (D x Š x V): 1.630 x 700 x 1.200 mm Teža ca.: 480 kg Skupna potrebna moč: 1,1 kW Upogib: 2 Debelina pločevine: 3 mm Hnedpfxjd Eqqqo Aagek Dolžina pločevine: 1.050 mm Tehnični podatki Valjčna naprava za pločevino Premer valja: 90 mm Hitrost valjanja: 6 m/min • Asimetrična razporeditev valjev • 2 valja gnana s pomočjo zavornega motorja • Nastavitev zadnjega valja z ročnim kolesom • Zgornji valj izmenljiv • Naprava za konusno valjanje • Dvojna nožna stikala za desni-levi tek • Spodnji in zadnji valj z utori za žico • Navodila za uporabo v NEMŠČINI DODATNO: kaljeni valji EURO 900,--

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Track gauge approx. 20.0 m Lifting height approx. 8.0 m Manufacturer/Overhaul: HILGERS/TEICHMANN Conversion/Overhaul: 2000/2023 Crane equipped with: Hnjdpfx Ajqfc Egeagek - Two-rail trolley with 4-corner rope lead-out - Magnetic system pre-installed - Radio remote control - Optional with magnet beam or spreader

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 804, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, najv. debelina pločevine: 16 mm, najv. debelina jeklene pločevine: 16 mm, skupna masa: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Hjdpfjvxbm Rex Aagjnk Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic adjustment of the rolls Dimensions: L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair frame around the machine can be purchased.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, doseg roke: 1.300 mm, Popoln paket za vašo avtomatizacijo varjenja z najnovejšo robotsko serijo UR10e – prosimo, ne kupujte več serije CB. Želite svojo varilnico avtomatizirati s Cobotom, da boste kos prihodnjim izzivom? Potem je rešitev OH-au2mate Cobot Welding Solutions z varilnim izvorom Lorch prava izbira za vas! Ta popolno usklajen paket združuje: - visokokakovostno robotsko tehnologijo vodilnega podjetja na trgu Universal Hsdpfx Aaet S U Auogenk - inovativno varilno tehnologijo Lorch - intuitivno programsko opremo za upravljanje Točen paket zajema: robot UR10e pripravljen za varjenje, upravljalne elemente, nosilec gorilnika, varilni izvlečni gorilnik Translas 8XR, varilni izvor Lorch S5 z 400A.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. Hsdpsd Ixadefx Aagonk The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, Leto izdelave: 2014, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 20 obr/min, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel ranges / Axis travels: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Hsdpfxsygipae Aagenk Vertical (Z): mm 1,500 Clamping table / Table area: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: Units: 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. workpiece load: kg 11,000 Paintwork: Graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: min⁻¹ 20–6,000 Max. torque: Nm 935 Spindle speed control: 3-stage (oil-cooled) With automatic changeover Feeds: X-, Y- and Z-axis mm/min 2–15,000 Max. rapid traverse speed: X-, Y- and Z-axis mm/min 25,000 Max. feed force: X-, Y- and Z-axis: N 22,000 Space requirements: Length approx. BT3200 mm 8,100 (without cross conveyor + 1,280mm) Height approx. (at Z=1,500mm) mm 3,800 Width approx. (at Y=1,200mm) mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & ICS (internal coolant supply) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any obvious faults and defects identified are professionally repaired by our skilled service team.

Stanje: dober (rabljeno), Leto izdelave: 2007, VRTALNI STROJ Delovno območje: V630/1000M Min. / maks. višina: 10 – 450 mm Min. / maks. širina: 60 – 1.050 mm Maks. teža pozicioniranja: 9.000 kg Število vrtalnih enot: 3x Avtomatski menjalec orodij: 3x (3x 5 pozicij) Merjenje višine: Vključeno Merjenje širine: Vključeno Teža stroja: 12.000 kg Merilni sistem z valji za pomik Maks. hitrost: 42 m/min Min. dovodna dolžina: 1.500 mm Vrtalna enota: VD40 Pomik in pozicioniranje: servo-motorji s servo-invertorji Obrati vretena: brezstopenjsko 100 – 2.500 min⁻¹ (servo-motorji) Mazanje: notranje z meglo zraka / olja Vpenjalni stožec: SK 40 Premer svedrov za olje-cevne svedre: 8 – 40 mm Premer svedrov za karbidne svedre: 13 – 32 mm Rezkanje navojev: M8 – M24 Možnost označevanja izvrtin: Da, na 3 straneh ŽAGA Žaga: VB1050 Kapaciteta (višina x širina) 0°: 500 x 1.130 mm Kapaciteta (višina x širina) +/- 15°: 500 x 1.060 mm Kapaciteta (višina x širina) +/- 30°: 500 x 925 mm Kapaciteta (višina x širina) +/- 45°: 500 x 725 mm Kapaciteta (višina x širina) +/- 60°: 500 x 470 mm Brezhitrostno pomikanje traku: 40 – 120 m/min Hjdpfx Asvpafyoagonk Motor žaginega pogona: 7,5 kW Dimenzije žaginega traku: 9.550 x 54 x 1,6 mm Hidravlično napenjanje traku: 48.000 N Teža stroja: +/- 8.500 kg