Colchester Master 3250 nakup rabljenega (66)

Stanje: zelo dobro (rabljeno), Swing over bed 360 mm Distance between centers 650 mm Lajdjrx Rwnjpfx Ah Aek Spindle speeds 20-3250 rpm Various accessories included MARCELS MASCHINEN CH

Stanje: novo, Leto izdelave: 2025, Swing diameter over bed: 350 mm Swing diameter over support: 196 mm Turning length: 650 mm Centre height: 170 mm Spindle bore: 42 mm Drive power: 7.5 kW - New machine - with 3-axis digital readout ACU-RITE including Lsdoxxb Azspfx Ah Asak constant cutting speed, traversable over the entire bed length, MULTIFIX quick-change tool post size MB * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Stanje: dober (rabljeno), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Centre distance: 650 mm Spindle bore: 42 mm Infinitely variable speed: 15–3250 rpm 1 x SCHUNK wedge bar power chuck Ø160mm 1 x MULTIFIX toolholder size B with 4 inserts Machine lamp, chuck guard with electrical interlock Machine mounting feet 1 x live centre 1 x live centre with pressure gauge 1 x drill chuck with morse taper Lajdpfx Ahjuqkf No Ajk The machine is located with us in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine can be arranged by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, - Digital display. - Accessories included. Centers Center height 170 mm Center distance 650 mm Swing over bed 350 mm Swing over cross slide 196 mm Swing in gap 535 mm Width in front of faceplate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Taper in bush No. 3 MT Spindle speeds 3 speed ranges 0 – 3250 rpm Main drive motor 7.5 kW (10 HP) Bed Carriage guideway width 318 mm Guideway type V-guide and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-change toolpost Dickson No. 2 Tailstock Quill diameter (nominal) 63 mm Quill travel 145 mm Morse taper No. 4 MT Offset ±12 mm Laodpjtr Ud Sofx Ah Aok Leadscrew Diameter 32 mm Pitch 6 mm or 4 TPI Threads Metric pitch 0.2 – 14 mm (51 pitches) Inch thread TPI 2-56 (56 pitches) Module thread pitches 0.2 – 3.5 (20 pitches) Diametral pitch (DP) 8 – 56 (20 pitches) Feeds Metric (R10 series) 0.018 – 1.2 mm/rev Inch (R10 series) 0.0007 – 0.048 in/rev Facing feed = approx. half of longitudinal values Machine height Floor to spindle center 1070 mm Overall length 1250 mm machine 2500 mm Overall width 1100 mm Overall height 1300 mm Coolant pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between centers approx. 1450 kg

Stanje: novo, Leto izdelave: 2024, Swing diameter over bed: 350 mm Swing diameter over support: 196 mm Turning length: 650 mm Lajdpfx Ajwp Tpkjh Aok Centre height: 170 mm Spindle bore: 42 mm Drive power: 7.5 kW - New machine - with 3-axis digital readout ACU-RITE including constant cutting speed, traversable over the entire bed length, MULTIFIX quick-change tool post size MB * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Stanje: pripravljen za uporabo (rabljen),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 38.880 h, Funkcionalnost: popolnoma funkcionalen, Lep stružnica Colchester Master 2500. Vse v odličnem delujočem stanju, uporabljena le občasno v času našega lastništva. Priložena so 3- in 4-čeljustna vpenjala, čelna plošča ter cel nabor nosilcev in drugih orodij. Prosimo, sporočite, če potrebujete dodatne fotografije stružnice ali njenih delov. Lodpfx Aex Akdioh Asak

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, višina središča: 165 mm, širina na sredini: 635 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 30 obr/min, skupna masa: 900 kg, Dear Sir or Madam, For sale is a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully functional and can be inspected and tested on site. Availability: immediately Centre distance: 635 mm Centre height over bed: 165 mm Centre height over cross slide: 105 mm Laodpfxju St S Aj Ah Ask Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Required floor space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Stanje: rabljeno, Leto izdelave: 1986, Swing over bed: 335 mm Swing over cross slide: 165 mm Turning length: 635 mm Total power requirement: 2.2 kW Digital readout: 3-axis digital display Bar capacity: Ø 40 mm Spindle speed range: 30 - 2500 rpm Ljdpfsufud Rjx Ah Asak Spindle nose: D1-4 Camlock Four-jaw chuck diameter: 200 mm Three-jaw chuck diameter: 200 mm Tailstock: MT 3 Machine weight approx.: 860 kg Space requirement approx.: 1700x1000x1700 mm Digital readout: Heidenhain Various accessories such as a tailstock drill chuck, tool holder, etc. Machine is in good condition.

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: 1527, rabljeni vodilno-vlečni stružnica COLCHESTER Triumph VS 2500 Višina konic: 195 mm Lodsx Hrumopfx Ah Aeak Medosna razdalja: 650 mm Vretenska odprtina: 54 mm Neomejeno nastavljiva hitrost od 14 do 2500 obr/min Pinola konjička MK5, hladilna naprava, hitra naprava za rezanje navojev Digitalni prikaz FAGOR NUP 300 TS-RS. 1 x RÖHM trije-čeljustni vpenjalnik, 5-pozicijski bobenski omejevalnik, vzdolžni omejevalnik vretena, Strojna luč, 1 x PARAT 4-pozicijska revolverska glava, 4 x PARAT izmenjljivih nosilcev, soječ konjiček in hitro-vpenjalna vrtalna glava. Stroj je pri nas v 71334 Waiblingen-Beinstein in je takoj na voljo. Ogled stroja je mogoč po dogovoru.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 54 mm, premer struženja nad ležiščem sani: 390 mm, 3-čeljustna vpenjalna glava Digitalni prikazovalnik Multifix držalo za nože Konjiček Zadnji konjiček Lsdpfx Ahjx Evzbs Ajak Tehnični podatki: Razdalja med konicama: 765 mm Premer vrtenja nad posteljo: 390 mm Premer vrtenja nad sani: 240 mm Premer vrtenja v izrezu: 580 mm Premer vretena: 54 mm Obseg hitrosti vretena, 16 stopenj: 25-2000 min⁻¹ Pogonska moč: 5,5 kW Teža stroja pribl.: 1300 kg Tehnični podatki, dodatki in opis stroja niso zavezujoči.

Stanje: pripravljen za uporabo (rabljen), Colchester Triumph 2500 Lathe Turning Machine Swing over bed: 400 mm Swing over cross slide: 246 mm Distance between centers: 1270 mm Center height: 195 mm Max. workpiece diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2500 rpm Infinitely variable spindle speed ranges: Low: 14–300 rpm Medium: 36–830 rpm High: 109–2500 rpm Laedpoxfrgdjfx Ah Ask Overall dimensions: 2600 mm x 1300 mm x 1800 mm (L x W x H) Accessories: - 5 Multifix tool holders - Steady rest - Live and dead centers - Drill chuck - Jaws - Cabinet - Coolant pump You are welcome to arrange an on-site inspection. We can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. This requires a valid VAT identification number. Subject to prior sale. Visit our shop and also check out our other offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the product description may occur and are subject to change.

Leto izdelave: 2015, obratovalne ure: 5.000 h, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 1800 kg Glavni pogon Območje hitrosti vretena: 2500 Ta stroj Colchester Triumph VS 2500 je bil izdelan leta 2015. Opremljen je s klasično prečno in vzdolžno vijačno podajo, brezstopenjsko nastavitvijo hitrosti in digitalnim prikazovalnikom. Ključne specifikacije vključujejo premer struženja 400 mm, višino osi 195 mm in širino postelje 1270 mm. Opremljen je tudi z MultiFix hitromenjalnim nosilcem orodja, maksimalno hitrostjo vretena 2500 obr/min ter močjo motorja 7,5 kW. Teža: 1800 kg. Za več informacij o stroju nas kontaktirajte. Lajdpfx Ahsx D Nwdj Ajk Področja uporabe Struženje

Stanje: rabljeno, Swing diameter over bed: 540 mm Maximum swing diameter over cross slide: 370 mm Distance between centers: 3000 mm Center height: 270 mm Turning diameter in gap: 815 mm Bed width: 344 mm Spindle bore: 88 mm Spindle diameter in front bearing: 133 mm Spindle mount: 11" D1 Camlock Speed range: 18–1400 rpm Number of spindle speeds: 16 3-jaw chuck Röhm Ø 315 mm Longitudinal feeds: 0.06–1.0 mm Lajdpfx Ahsxnqzxs Aek Cross feeds: 0.03–0.5 mm Metric threads: 0.4–14 mm Imperial threads: 2–72 TPI Thread module: 0.3–3.5 mm Thread DP: 8–60 pitch Tailstock quill diameter: 75 mm Quill stroke: 230 mm Quill taper: MK 5 Cross slide travel: 280 mm Top slide travel: 150 mm Machine dimensions approx. 4700 x 1100 x 1400 mm Weight approx. 3200 kg Drive power: 9.4 kW Accessories: - Fagor 3-axis digital readout - Röhm wedge-bar chuck Ø 315 mm incl. hard base jaws and hard top jaws - Multifix tool post size C, incl. 6 tool holders - Revolving centre - Electrically interlocked chuck guard - 2 steadies - Chip guard (rear cover) - Coolant system - Work light Guideways in good condition The machine is in overall good condition, commensurate with its age and showing normal signs of use. Including operating manual

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 390 mm, izvrtina vretena: 116 mm, premer struženja: 635 mm, premer struženja nad ležiščem sani: 390 mm, stružna dolžina: 2.000 mm, Rabljeni stružnica v zelo dobrem stanju, vključuje 400 mm trivrato vpenjalno glavo, majhen lunetni nosilec in Multifix nosilec orodja. Tehnične specifikacije: Dolžina struženja: 2.000 mm Lajdpfox Eln Rex Ah Aok Premer struženja nad ležiščem: 630 mm Premer struženja nad suportom: 390 mm Premer struženja v mostiču: 900 mm Premer vretena: 116 mm Skupna teža: 4.230 kg Vpenjalo: D1 11 in. Camlock Morse konus 6

Stanje: dober (rabljeno), Leto izdelave: 2007, premer struženja nad prečnim suportom: 370 mm, izvrtina vretena: 104 mm, stružna dolžina: 2.000 mm, premer struženja: 554 mm, širina na sredini: 2.000 mm, premer struženja nad ležiščem sani: 554 mm, premer nihanja nad prečnim premičnikom: 370 mm, premer struženja nad zgornjim sanežem: 554 mm, največja hitrost vretena: 2.000 obr/min, skupna dolžina: 4.100 mm, skupna širina: 2.000 mm, skupna višina: 1.750 mm, skupna masa: 3.600 kg, največja hitrost vrtenja: 2.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Obdelovalna dolžina: 2.000 mm Obdelovalni premer: 554 mm nad posteljo / 370 mm nad prečnim sani Premer vretena: Ø 104 mm Hitrosti vretena: 2.000 min⁻¹ 3-čeljustna vpenjalna glava: Schunk Ø 350 mm Camlock Krmiljenje: GE Fanuc Opremljen z: - 1x Fiksna luneta Ø 245 mm (brez fiksirne plošče) - 1x Fiksna luneta Ø 390 mm (brez fiksirne plošče) - 18 držal Parat za orodja - Različne čeljusti za vpenjalno glavo - Središčne konice Lsdpfx Ahox Id Dcs Aeak - Hladilni sistem - Navodila za uporabo Država porekla: VB Moč motorja: 7,5 kW Dimenzije stroja (D x Š x V): 410 x 200 x 175 cm Teža stroja: 3.600 kg

Stanje: dober (rabljeno), premer struženja nad prečnim suportom: 267 mm, premer struženja: 432 mm, širina na sredini: 1.500 mm, 3-jaw chuck diameter 250 mm Steel tool post Steady rest Tailstock Coolant system Technical data: Center distance: 1500 mm Turning diameter over bed: 432 mm Turning diameter over cross slide: 267 mm Laedpfx Ahstq Exrj Aek Turning diameter in the gap: 710 mm Spindle bore: 76 mm Spindle speed range: 20–1600 rpm Drive power: 9.3 kW Machine weight approx.: 2310 kg Technical data, accessories, and description of the machine are non-binding.

Stanje: dober (rabljeno), Prodajam stružnico Colchester Triumph 2500, ki je popolnoma delujoča in pripravljena za uporabo. Stružnica je opremljena z digitalnim prikazovalnikom Fagor ter ima črpalko za hladilno-mazalno sredstvo, nameščeno pod koritom za ostružke. Tehnični podatki: Višina konic: 167 mm, Razdalja med konicama: 635 mm, Premer struženja nad posteljo: 330 mm, Premer struženja nad prečnim suportom: 210 mm, Vrtina vretena: 40 mm, Pogonska moč: 2,2 kW. Vključeni so 15 držal orodij, valjčna konica in noge stroja. Nakladanje predstavlja težavo. Ledpfx Asxw N I Neh Ajak

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C535, premer struženja nad prečnim suportom: 370 mm, stružna dolžina: 2.000 mm, največja hitrost vretena: 1.800 obr/min, skupna dolžina: 6.000 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, skupna masa: 4.250 kg, razdalja med središči: 2.032 mm, COLCHESTER COMBI K4 R/600 CNC Cycle Lathe TECHNICAL DATA & FEATURES: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1,800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle center height from floor: 1,238 mm Nominal distance between centers: 2,032 mm Max. working length between centers: 2,152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle sleeve: No. 5 MT Spindle bearing diameter: 145 mm Spindle bore (bar capacity): 102 mm Spindle speed range: Low: 4.5–450 rpm High: 18–1,800 rpm Cross slide (X-axis): Travel (programmable limit): 290 mm Saddle (Z-axis): Travel (programmable limit): 2,032 mm Tailstock: Quill diameter x stroke: 95 x 145 mm Lajdpfx Ahsxd D Rfo Ask Morse taper in quill: No. 6 MT For further technical details, refer to the photographed spec sheet. Supplied with technical documentation as shown in the photos. Supplied with accessories as shown in the photos, incl. tool holder. The machine will be loaded onto truck with overhead crane assistance. Please provide an appropriate vehicle. DIMENSIONS & WEIGHT: 6,000 x 1,800 x 1,800 mm 4,300 kg NOTES ON COLLECTION: This item will be available from October 2025. A specific date for collection must be arranged starting from 01.10.2025. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Stanje: dober (rabljeno), Leto izdelave: 2000, Oprema: dokumentacija / priročnik, TORNADO COLCHESTER 200 LATHE FANUC GE Series CNC control SELF-CENTERING CHUCK DIAMETER: 250 mm Ledpfstuut Uox Ah Ajak TRAVELS: X: 215 mm Z: 400 mm TOOL MAGAZINE: 12 POSITIONS INCLUDES VARIOUS TOOL HOLDERS AND MISCELLANEOUS TOOLS BAR CAPACITY: 65 mm PROGRAMMABLE TAILSTOCK CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION

Stanje: novo, Leto izdelave: 1970, Premer struženja nad posteljo: 540 mm Premer struženja nad suportom: 365 mm Dolžina struženja: 2000 mm Premer struženja v izrezu: 800 mm Hitrost vrtenja: 18 - 1400 obr/min Višina konic: 270 mm Premer vretenaste luknje: 90 mm Skupna potrebna moč: 11,0 kW Teža stroja pribl.: 2,6 t Potrebni prostor pribl.: 3,7 x 1,4 x 1,8 m - Hitromenjalni revolver Multifix velikost B - 3-čeljustna glava 315 mm - Zaščita za vpenjalno glavo - Naprava za izklop v sili - Nožni pedal Lsdpfx Asxpiz Toh Ajak - Posoda za ostružke - Centrirna konica

Stanje: rabljeno, Leto izdelave: 1999, Tehnične podrobnosti: Premer struženja nad ležiščem: 554 mm Premer struženja nad sani: 370 mm Dolžina struženja: 1000 mm Razdalja med konicama: 1100 mm Krmiljenje: Fanuc 210i Premik v vzdolžni smeri (Z-os): 1000 mm Prečni hod (X-os): 290 mm Število obratov: 16 - 1800 min⁻¹ Hod vretena: 178 mm Lajdpjv Azdwefx Ah Ajk Pomik: 10 m/min Premer vretenine: 104 mm Vretenasta prirobnica: D1 - 11 Konus konjiča ISO: 6 MT Vretenov motor: 11/7,5 kW Priključna napetost: 380 V Električna izvedba - napetost/frekvenca: 3 faze / 400 V / 50 Hz Skupna priključna moč: 11 kW Teža stroja pribl.: 4,0 t Mere stroja pribl. D x Š x V: 3,3 x 1,8 x 1,7 m

Stanje: dober (rabljeno), Colchester / Harrison / 600 Lathes TORNADO 300 CNC Lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle mount: A2-8 Spindle bore: 90.5 mm Chuck sizes (Type A): 265 mm Draw tube diameter: 82 mm Front bearing (Inner diameter): 130 mm Max. spindle speed: 4000 rpm X-axis travel: 240 mm Travel above turning center: 213 mm Below center: 27 mm Z-axis stroke: 500 mm Feed Rates: Rapid traverse X-axis: 10 m/min Ledpfxernkhyo Ah Asak Rapid traverse Z-axis: 20 m/min Min. feed increment: 0.001 mm Tool Turret: Turret, number of tools: 12 Tool holder interface: VDI 3425 / 40 Turning tool shank size: 25 x 25 mm Max. boring bar diameter: 40 mm Tailstock quill diameter: 95 mm Quill taper: No. 5 MT Quill stroke: 125 mm Tailstock travel: 485 mm Max. tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. machining diameter: 300 mm Max. turning length: 500 mm Centre height over floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Saddle inclination: 600 mm Footprint: 3.26 m2 Weight: 3300 kg We do not guarantee the correctness, completeness or currentness of the information provided.

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, premer struženja nad prečnim suportom: 178 mm, izvrtina vretena: 35 mm, premer struženja: 280 mm, višina središča: 145 mm, stružna dolžina: 750 mm, skupna dolžina: 1.700 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 3.500 obr/min, hitrost vretena (min.): 70 obr/min, skupna masa: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 11 A - Spindle nose: D 1-3 - Morse taper in quill: 3 Lajdpfev Iqr Ujx Ah Ask - Leadscrew diameter: 25 mm - Thread pitch: 6 mm

Stanje: dober (rabljeno), Leto izdelave: 2008, Colchester Harrison Alpha 1400U CNC Lathe Footprint: 1.7 x 3.1 m Height: approx. 1,500 mm Weight: 3,200 kg Equipment: Electrically interlocked chuck guard, full enclosure, 100-litre coolant tank and pump, fully extendable chip tray, machine lighting Turning length: 1,250 mm Lajdpfx Ahsrnkdye Aok Swing diameter: 400 mm Centre distance: 1,250 mm Spindle bore: 54 mm Turret, number of tool positions: 8 Tool size: Standard: 20 x 20 mm Boring bar: 32 mm No guarantee is given for the correctness, completeness, or currentness of the information.