Optimum F310 Hsc nakup rabljenega (611)

Leto izdelave: 2026, stanje: novo, Instantaneous water heater with tube heat exchanger directly in boiler water * Compact design and low weight * Energy savings up to 10%! Fgodpfx Abjt Eui Ioroh * Low maintenance * Easy to clean * Excellent price/performance ratio * Available with oil or gas burner Technical data: * Boiler output: 40 kW * Hourly output: up to 550 liters (10–78 °C) * Dimensions (H/W/D): approx. 140 x 100 x 115 cm * Empty weight: approx. 190 kg ##### RINK – Pasteurization systems for over 30 years Proven technology – more than 500 machines in use by customers

Leto izdelave: 2026, stanje: novo, Durchlauferhitzer with tube heat exchanger integrated directly into the boiler water * Compact design and low weight * Energy savings up to 10%! * Low maintenance * Easy to clean * Excellent price-performance ratio * Available with oil or gas burner Fodpfjt Hfx Aex Abrjgh Technical specifications: * Boiler output: 60 kW * Hourly capacity: up to 850 liters (10-78 °C) * Dimensions (H/W/D): approx. 160 x 110 x 140 cm * Empty weight: approx. 230 kg ##### RINK - Pasteurization systems for over 30 years Proven technology - more than 500 units in use by customers

Leto izdelave: 2026, stanje: novo, Instantaneous water heater with tube heat exchanger directly immersed in boiler water * Compact design and low weight * Energy savings of up to 10%! * Low maintenance * Easy to clean * Excellent price/performance ratio * Available with oil or gas burner Technical specifications: * Boiler output: 80 kW * Hourly capacity: up to 1,100 liters (10-78 °C) * Dimensions (H/W/D): approx. 160 x 110 x 160 cm Fodpfot Hfyajx Abrjgh * Empty weight: approx. 280 kg RINK – Pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 16 kg, proizvajalec krmilnikov: Kuka, model krmilnika: KRC2, trajanje garancije: 12 meseci, PRICE ON REQUEST! Price on Request: - The price for the listed products is not specified directly and must be requested individually. Condition of Products: - The products offered are used but have been fully overhauled, with all wear parts (O-rings, precision bearings, shaft seals, screws, retaining rings, Castrol oil) replaced. Measurements and Testing: - Precise measurements were carried out, particularly for axis and gearbox backlash. An 8-hour load test was also performed. (Gearbox backlash: Axis 4 - 0.01 / Axis 5 - 0.01 / Axis 6 - 0.01) Delivery and Packaging: - Products are delivered in a special box; shipping is insured. Central Hand Exchange: - There is an option to receive the central hand as an exchange unit. Alternatively, it can be purchased without an exchange upon request. Warranty: - Each central hand comes with a 12-month warranty. The warranty can be extended to 18 months for an additional charge. Stock Availability: - The supplier stocks over 100 central hands; various models are available. Express Overhaul: - Fast overhaul of KUKA central hands is offered, completed within 48–72 hours from receipt of the unit. Repair Service: - In addition to the listed products, a repair service for ABB wrist assemblies is also available. Industrial Robot Repair & Maintenance: - Does your industrial robot have issues such as oil leaks, excessive gearbox backlash, crash damage, or substantial wear? Our experienced repair and maintenance service is here to assist you! Our Key Services: Correcting Oil Leaks: - We identify and fix leaks, replace seals, and ensure reliable sealing. Reducing Gearbox Backlash: - Through precise measurement and adjustment, we minimize backlash to guarantee optimal performance. Crash Damage Repair: - After collisions, we perform comprehensive analysis, replace damaged parts, and restore full functionality. Wear Reduction: - All worn components are carefully replaced to extend the service life of your robot. Wrist Repairs for Multiple Brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and many more. Why Choose Our Services: - Experienced team of robotics experts Fgodpfxerqga Ho Abreh - Fast diagnostics and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include refurbishment of all wrist assemblies for leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and more. We generally only sell by exchange. Sales price includes statutory VAT. Collection on-site by appointment only. Contact us today for tailored advice and a quotation. We specialize in restoring your industrial robots to top condition! If you need more information or are interested in a product, please contact the supplier directly and send your inquiry to "vertrieb(at)robotic-refit.de".

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Horizontal injection molding machine from Krauss-Maffei with 120 tons clamping force. All-electric machine. Year of manufacture: 2008. MC5 control system. 63,000 operating hours. 40 mm screw diameter. Extras: anti-vibration plates, 8-zone flowmeter. Additional options: 1x pneumatic valve, 6 hot runner zones, Euromap 67 interface for robot connection. The machine is delivered REFURBISHED by our technical team and in optimum working condition. We can offer commissioning service at your facility. Technical Details INJECTION WEIGHT: 185 g INJECTION VOLUME: 201 ccm OPERATING HOURS: 63,000 YEAR OF MANUFACTURE: 2008 TIE BAR DISTANCE: 470x470 mm PLATEN DIMENSIONS: 780x770 mm Fjdpfx Abjttgybersgh CLAMPING FORCE: 1,200 kN INJECTION PRESSURE: 1,860 bar SCREW DIAMETER: 40 mm MINIMUM MOLD HEIGHT: 200/450 mm OPENING STROKE: 850 mm

Stanje: rabljeno, prevoženi kilometri: 98.327 km, moč: 115 kW (156,36 KM), prva registracija: 11/2019, vrsta goriva: dizel, skupna masa: 7.490 kg, barva: rdeča, vrsta prenosa: mehanski, emisijski razred: Euro 6, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.080 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Atego 816 Box Truck with Air Conditioning * Air conditioning * Cruise control * Box body * Bär Cargolift tail lift, load capacity 1000 kg * Wheelbase: 4,220 mm * Engine: 5.1 L - 115 kW Diesel (OM 934) * German truck Fjdpfx Aem Tqhwsbrjgh * 1 previous owner * Driver assistance systems: Active Brake Assist * Lane keeping assist * Stability control assist * Emission standard: Euro 6 * Cab: S ClassicSpace * AdBlue tank: 35 l * Diesel tank: 120 l * Immobilizer * Unladen weight: 5,715 kg * Tyres: 215/75 R 17.5 front 6/6 mm * Rear: 215/75 R 17.5 7/7/7/7 mm * Box body for sale * Loading space length: 6.1 m * Loading space height: 2.08 m * Loading space width: 2.5 m * TÜV inspection will be renewed at our expense before sale * All information without guarantee * Further information and criteria under additional service * Repainting and retrofitting available * Short-term and export license plates available * Transfer and shipping possible * Assistance with customs and export documents * Procurement of COC and EUR documents possible * On the market since 1991 * Leasing and financing options available. We have long-standing partnerships with several leasing companies and can therefore offer optimal financing for every customer. We can often assist customers with weaker credit ratings and establish contact with reliable leasing partners. * Own workshop * We speak Polish, English, and Russian. * Repainting in your desired color is possible in-house at a competitive price and high quality. * Are you located further away and cannot visit or inspect the truck in person? No problem. You are welcome to appoint an independent expert of your choice to inspect the truck both technically and visually. Should any defects arise contrary to expectations, we can fix them quickly and efficiently in our workshop. Furthermore, we can deliver your new used vehicle across Europe for a surcharge.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending Fgsdsndk N Aopfx Abrjh • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm Fgedpfx Aonfvy Uobrjh • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases Fsdpfsng Ax Sox Abrsgh • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases Fgodpfx Abeng A R Sorsh • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: rabljeno, Leto izdelave: 2021, Overview The bottle orienter was manufactured in 2021 by the German company ALWID. It forms part of a new filling line and is capable of filling chemical products into plastic containers. The machine features ATEX certification, allowing it to process explosive products. The machine can be purchased with a warranty. Technical Data - Capacity: 12,000 bottles/h at 50 ml HDPE, oval 43 x 23 x 95 mm - 14,000 bottles/h at 250 ml HDPE, Ø60 mm x 126 mm - Includes 2 format sets for processing the above-mentioned bottle sizes - Fully enclosed with full cabin, machine frame and wall panels in stainless steel - Base frame in mild steel, painted (approx. RAL 9006 silver-grey) - Quick access via large doors and easily removable covers - Ejection of faulty bottles Easy format change via quick-change system without tools Siemens S7 control system Fgedomk I Dwepfx Abrjh Bottle feeding system with 1000 L hopper in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimal adaptation to the downstream filler

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 12.000 W, najv. debelina jeklene pločevine: 30 mm, maks. debelina aluminijaste pločevine: 30 mm, maks. debelina medeninaste pločevine: 20 mm, najv. debelina bakrene pločevine: 15 mm, moč: 12 kW (16,32 KM), trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, DURMA Fiber Laser Cutting System HD-FN 3015: The ideal price-performance solution. The DURMA Fiber Laser Cutting System HD-FN 3015 is the best choice for companies seeking maximum performance and efficiency at an unbeatable price. This state-of-the-art machine combines innovative technology with user-friendly operation, thereby offering outstanding advantages for metal processing. Technical Data Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Mild steel: 30 mm Stainless steel: 25 mm Aluminium: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Travel axes: X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Sheet panels Maximum sheet panel size: 3048 x 1524 mm Fgedpfx Absu E Tczjrjh Maximum sheet panel weight: 240 kg/m² Speed and Precision: Maximum speed X-axis: 100 m/min Maximum speed Y-axis: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeatability: ± 0.05 mm Key Features of the System: ・Shuttle table: Longitudinally positioned for optimal accessibility of loading and unloading systems. ・Enclosed cutting area: Equipped with protective glass for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting operations. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimal material utilization. ・Positioning laser: Assists in the precise positioning of workpieces. ・Sheet check system: Automatic detection of sheet position and dimensions for improved process security. ・Automatic nozzle cleaning: Ensures continuous cutting quality. ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. ・Multi-chamber extraction system: Effective removal of smoke and particles. ・Light curtain protection: Ensures safety at the shuttle table. ・Remote maintenance access: Facilitates diagnosis and maintenance remotely.

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), številka stroja/vozila: 3284, • Protective screens around the machine. (min.) Material thickness: 0.65 mm Fgsdpfxohbu E He Abrsh (max.) Material thickness: 2 mm Technical specifications: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth negative/positive: 6/20 mm (22 mm negative upon request) Maximum top heating: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Maximum air consumption (depending on production): 1250 l/min Maximum water throughput: 1.0 m³/h COMPACT AND ROBUST – designed for high continuous output with easy operation. Ergonomic design (e.g. removal height 1300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, allowing for maximum material utilization for both rectangular and round lids (easy heater change). PRECISION – The precise forming table guidance via guide columns with ball bushings. The safe, reliable guarantee of precision. OPTIMAL CUTTING ACCURACY AT HIGH ENDURANCE LEVELS Cam-controlled functional sequence guarantees the highest repeat accuracy.

Leto izdelave: 2021, stanje: novo, Derryglan Ltd nudi širok asortiman industrijskih perača za svaku primenu: prehrambena industrija, mesna industrija, mesare, pekare, farmaceutska industrija, laboratorije, prerađivače i opštu industriju. Perači za pranje posuđa, gajbi, kontejnera, noževa i tacni. Fjdpfxsgq N Eze Abrjgh JEROS perači imaju posebno dizajniran poklopac koji se potpuno otvara, omogućavajući laku upotrebu i punjenje bez opterećenja leđa operatera. Posebne JEROS karakteristike omogućavaju jednostavnu instalaciju mašina, čak i u najmanjim proizvodnim prostorima. Dodatno, mašina može da se koristi kao sudopera kada se ne koristi kao automatski perač posuđa. Crevo za ispiranje omogućava ponovnu upotrebu vode za pranje, na primer, za čišćenje podova. Crevo za ispiranje može takođe da se montira na mešač, po potrebi. Ugrađeni mešač omogućava korišćenje perača kao sudopere sa zasebnim odvodom. Ispunjava najviše higijenske standarde – čak i najtvrdokornije nečistoće se uklanjaju! Potpuno automatski dozator deterdženta obezbeđuje optimalno doziranje sapuna. Snažne pumpe i rotirajuće prskalice za pranje obezbeđuju besprekorno pranje. Krajni pumpa za ispiranje garantuje konstantnu temperaturu ispiranja od 85°C tokom celog perioda ispiranja, čime se postiže dezinfekcija. Dodatna prednost visoke temperature ispiranja je brzo sušenje posuđa putem isparavanja, a automatski može biti dodat i sredstvo za ispiranje radi olakšanja ovog procesa. Nova generacija – Serija 9100 obuhvata ukupno pet novih modela: 9110 / 9115 sa rotacijskim sistemom za pranje i 9117 / 9120 / 9130 sa sistemom rama za pranje. Unutrašnjost mašina je temeljno redizajnirana sa fokusom na higijenu i lako čišćenje. Unutrašnje površine su zaobljene radi bržeg i automatskog vraćanja vode u filter i pumpe. Filteri, prskalice i ramovi izrađeni su u elektropoliranoj površinskoj obradi koja ostavlja nerđajuće površine potpuno glatkim, sprečavajući zadržavanje nečistoća. Ovo olakšava čišćenje i održavanje mašina. Efikasnost i optimalna higijenska sigurnost, uključujući HACCP standard, predstavljaju osnovne vrednosti JEROS-a. Ušteda energije do 25% – Svi modeli su dostupni kao standardna „i-verzija“. To podrazumeva štedljive dizne za ispiranje i izolirane rezervoare za pranje i ispiranje, kao i dvostruko izolovan poklopac. Perači zahtevaju manje pogonske snage, što rezultira uštedom energije i vode i do 25% za sve modele. Takođe, moguće je programirati „auto off“ funkciju, tako da mašina ne mora ostajati u režimu pripravnosti kada se ne koristi duže vreme. Eko program za pranje – Svi modeli standardno uključuju ekološki „ECO wash“ program za manje zaprljane predmete. Pritiskom na „ECO wash“, mašina pere na nižoj temperaturi i uz manju potrošnju deterdženta, dok je završno ispiranje na 85°C, što garantuje higijenski rezultat. Novi dupli mikro-filter – Jedinstveni sistem duple filtracije sa progresivnim mikro-filterom omogućava efikasnu filtraciju vode za pranje, što dovodi do savršenog rezultata pranja uz manju potrošnju sapuna i minimalnu potrošnju vode. Veće čestice zadržavaju se grubim filterom, dok manje čestice zadržava samostalno-čisteći mikro-filter. Tokom ciklusa pranja i ispiranja, sakupljene čestice se uklanjaju iz mikro-filtera sa donje strane, kao i sa površine vode, čime se obezbeđuje konstantno optimalan kvalitet vode za pranje.

Stanje: novo, Leto izdelave: 2023, Extraction capacity at nozzle* (filter unit): 2600 m³/h (free blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions (L/W/H in mm): L 9755 / W 508 / H 545 Fedpfx Aboh Rdxnorogh Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Field of application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC (digital filter control) optional - Electronically controlled EC fan as standard - Adjustable speed and air flow - Available as simplex (single-stage) or duplex (two-stage) - Wide range of air flow capacities available - Adaptable to pollutant load and required air flow - Extensive range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes involving pure oil and for separating oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitalised and can, for example, be controlled via laptop. The ELBARON® range comprises 18 device variants and can be perfectly tailored in size and capacity to your specific application. ELBARON® units impress with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to ensure, from an economic perspective, optimum filtration efficiencies, long service lives, and trouble-free operation.

Stanje: novo, Extraction capacity of filter unit at nozzle*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz, 1Ph+N+PE Noise level*: 67 dB(A) Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on filter configuration Special voltages or custom colours available on request Fgodpoh Rynqsfx Abroh Application: Separation of emulsion mist, for small to medium-sized machine workspaces. Your advantages: - Compact dimensions - High-efficiency EC fan as standard - Speed and airflow adjustable (optional) - Washable pre-filter - Separation efficiency up to 99.95% using H13 HEPA filter - Wide range of installation and connection accessories - Flexible adaptation to application requirements - Optimised service life - Quality made in Germany With our TEBARON, we offer a compact air filtration unit tailored to meet the diverse demands of modern machining processes and the resulting emission profiles. The TEBARON is designed as a compact air filtration solution for the separation of emulsion mist in small to medium-sized machine workspaces. Our primary development focus was on achieving compact dimensions combined with maximum energy efficiency, cost-effective operation due to low follow-up costs, and maximum sustainability. To fulfil these objectives, the TEBARON series is equipped with high-efficiency, adjustable EC fans. The standard integrated pre-filter package consists of three fully washable stages, providing high effectiveness against liquids and medium-to-large particles to protect the main filter and maximise its service life. The main filter can be customised to the specific application. As standard, we use an H13 HEPA filter, providing a separation efficiency of 99.95% for particles as small as 0.3 μm.

Stanje: novo, Leto izdelave: 2024, moč: 0,75 kW (1,02 KM), SCHORR Electric High-Lift Pallet Truck 1200 kg Load Capacity -- Various lift height options available (2500 mm, 3600 mm) -- Fully electric & self-propelled with multiple driving modes -- Cost-effective alternative to purchasing a forklift -- Low maintenance, smooth operation, easy to use -- 24 V 80 Ah AGM batteries (maintenance-free) -- Integrated charger for convenient recharging -- High-quality CURTIS controller (waterproof) -- Secure standing thanks to electromagnetic brakes -- Sturdy chassis and robust metal cover ensure high stability -- High-performance hydraulic pump Prices depending on lift height / variant: -- 2500 mm lift height: €2,836 -- 3600 mm lift height: €3,239 The SCHORR electric high-lift pallet truck has a capacity of 1200 kg and, depending on the chosen model, achieves a lift height of up to 2500 mm or 3600 mm. Thanks to its robust construction, stable chassis, and durable metal cover, the machine offers high stability and long service life. Central controls such as battery charge indicator, emergency switch, and key are easily accessible and directly in the operator’s line of sight. With its small turning radius, the pallet truck is extremely maneuverable, allowing you to handle loads effortlessly even in confined spaces. An integrated 24 V/10 A charger lets you recharge the electric pallet truck conveniently. The pallet truck is equipped with a maintenance-free 24 V/80 Ah AGM battery, and you can easily connect the unit to a standard 230 V socket for charging. Fgjdpfxeqv D Hus Abrsh In addition to the normal travel speed of approx. 4.2 km/h, it features a “turtle” or “creep mode”. This allows you to reduce traction speed for precise maneuvers when transporting sensitive goods, for example. With its secure construction and integrated steel reach-through protection, the pallet truck provides optimal safety for you and your staff during operation. Electromagnetic brakes ensure a stable stand and maximum stability for your transport tasks. Technical Data Manufacturer (Abbreviation): SCHORR Model code: RR12HHE3 Capacity: 1.2 t Model: 250E // 360E Service weight incl. battery: 455 kg // 489 kg Drive: Electric Tyres: Polyurethane Basic Dimensions Overall length: 1,706 mm Overall width: 925 mm Length including fork back: 556 mm Lift: 2,500 mm // 3,600 mm Mast height, retracted: 1,820 mm // 2,370 mm Mast height, extended: 3,035 mm // 4,130 mm Fork dimensions (DIN ISO 2331): 60 mm x 170 mm x 1,150 mm Outside fork width: 570 mm Aisle width with 800 x 1200 mm pallet, lengthwise: 2,180 mm Turning radius: 1,415 mm Performance Travel speed with/without load: 4.0 km/h / 4.5 km/h Lifting speed with/without load: 0.10 m/s / 0.15 m/s Lowering speed with/without load: 0.12 m/s / 0.10 m/s Max. gradeability with/without load: 3% / 10% Would you prefer to finance or lease the machine instead? No problem! We also offer attractive financing and leasing options. Simply contact us for personalized advice. We look forward to your inquiry! The SCHORR team would be happy to answer any further questions you may have regarding our pallet trucks. You can reach our experienced team by phone or email. We look forward to hearing from you and supporting your purchasing decision.

Stanje: novo, Leto izdelave: 2024, moč: 1,2 kW (1,63 KM), SCHORR ELECTRIC HIGH-LIFT STACKER PRO 1500KG CAPACITY 4.5M LIFT HEIGHT RR15HH450E FREE LIFT Powerful Professional-Grade Equipment with a Lift Capacity of up to 1500 kg -- Maximum lift height of 4.5m -- Free lift: Mast extends only above the initial mast height – ideal for low ceiling heights -- Robust triplex mast & heavy-duty chassis Fsdpfsqwdlpex Abrogh -- On-board charger included -- Equipped with powerful 24V 200Ah lead-acid batteries -- Digital energy level display & hour meter -- Tight turning radius of just 1575mm – perfect for confined workspaces EQUIPMENT / FEATURES Robust and High-Quality Design Thanks to its sturdy and stable construction, the high-lift stacker provides optimum stability and durability. With a load capacity of 1500kg, this stacker is a true powerhouse, offering the strength to lift heavy loads effortlessly to 4.5m. Free Lift Function: The free-lift feature makes this stacker particularly suitable for warehouses and rooms with low ceiling and door heights. The triplex mast only extends above the initial mast height (1570mm), enabling safe and efficient operation even in tight spaces. Combined with the 4.5m lift height, it’s a true all-rounder. Integrated Charger: The built-in 24V lead-acid battery with a capacity of 200Ah ensures long runtime. To recharge the electric stacker, simply connect it to a standard 230V socket using the supplied charger. Easy Handling: The stacker is user-friendly and features high-quality, waterproof controls that allow short-term use in damp or cool environments. All control instruments—battery charge indicator, emergency stop, and key—are centrally located within the operator’s direct view. With its tight turning radius of just 1575mm, the electric stacker is particularly maneuverable and suitable for flexible use. Multiple Drive Modes: With various driving programs, the SCHORR stacker adapts perfectly to user requirements. In addition to the standard transport speed of approx. 5.8 km/h, it features a "creep mode" for slow, precise maneuvering in the narrowest aisles and racking. Technical Data Manufacturer (Short name): SCHORR Manufacturer model code: RR15HHE Free Lift Load capacity: 1.5t Model: 450E Weight incl. batteries: 1125kg Drive: Electric Tyres: Polyurethane Principal Dimensions Overall length: 1975mm Overall width: 820mm Length including fork back: 905mm Lift: 4500mm Free lift: 1570mm Lowered mast height: 2054mm Extended mast height: 5030mm Fork dimensions (DIN ISO 2331): 60mm x 170mm x 1150mm Fork outside distance: 570mm Working aisle width with pallet 800x1200 lengthwise: 2450mm Turning radius: 1575mm Speeds Travel speed with/without load: 5.8km/h / 6.0km/h Lifting speed with/without load: 0.09m/s / 0.16m/s Lowering speed with/without load: 0.15m/s / 0.16m/s Max. gradeability with/without load: 6% / 15% Would you prefer to finance or lease this machine? No problem! We offer attractive options as well. Just contact us for advice on the various possibilities. We look forward to your enquiry!

Stanje: rabljeno, Leto izdelave: 2018, Bed Type Milling Machine, used Manufacturer: Austen Model: AX 607 Year of manufacture: 2018 Control system: HH Basic 5-axis HSC bed-type milling machine for the machining of long parts, such as beams. Previously used for aluminium profiles in window construction and can also be used for light steel machining. The spindle rotates and swivels. The machine moves on linear guides and is equipped with direct HH measuring systems. Technical Specifications: Travel distances: X-axis travel: 7000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Spindle speed, stepless: 20-20,000 rpm Fodeu Rfh Topfx Abrjgh Spindle motor: 11 kW Feed rate X-axis: 0-90 m/min Feed rate Y-axis: 0-50 m/min Feed rate Z-axis: 0-40 m/min Tool changer: 15 positions Spindle interface: HSK-63 Total power requirement: 50 kVA Machine weight: 12 tons Space requirements: 9 x 2 x 2.7 m

Stanje: novo, Leto izdelave: 2026, 150 ltr. insulated tank with 13.5 kW / 400 V heater featuring automatic temperature cut-off, frame, and bag-in-box filling unit with bag holder * Simple, safe, excellent value for money * No temperature fluctuations * Exceptionally gentle heating thanks to large heating surface (0.4 m²) * With thermostat: switches off at set temperature Fodpfx Abst U H Nrjrjgh * Height-adjustable stainless steel frame – tank drains completely "Leisure time" during heat-up: approx. 40 min for 150 ltr. Hourly output approx. 150 ltr. Also available with 18 kW / 400 V heater – hourly output 180 ltr. Two-station bottle filling available No 400V connection available? Tank pasteurizer is also available with gas-fired condensing boiler. ##### RINK – pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Stanje: pripravljen za uporabo (rabljen), ID - 6SN1123-1AB00-0BA1 SN - GWE-566018901080 Weight 3 kg Height 29 cm Length 48 cm Width 5 cm The Siemens 6SN1123-1AB00-0BA1 is a high-performance module from the SIMODRIVE 611 series for servo drives. This module is designed for operation with two axes and offers a maximum current rating of 25 A. It is equipped with internal cooling to ensure optimal performance and service life. Due to its robust design, it is ideal for demanding industrial applications and enables reliable and precise control of both AC and DC motors. Fodpfxjud Impj Abrsgh Thanks to its compact construction and dimensions of 29 cm in height, 48 cm in length, and 5 cm in width, the module can be easily integrated into existing systems. You can rely on the proven quality and performance of the Siemens 6SN1123-1AB00-0BA1 module to effectively meet your automation requirements. For detailed technical information, specifications, and application notes, we recommend contacting Siemens directly or an authorized Siemens distributor. They can provide the necessary information and assist you with any questions regarding the configuration and use of this specific product. All technical data provided without guarantee.

Stanje: rabljeno, prevoženi kilometri: 169.307 km, moč: 390 kW (530,25 KM), prva registracija: 04/2021, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: zelen, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, pogon na vsa štiri kolesa, DAF CF 530 4x2 * First registration: 12.04.2021 * 169,307 km * EURO 6 * 12,905 cc * 390 kW * Automatic transmission * Tyres: - 1st axle: 385/65 R 22.5, 11mm/10mm tread - 2nd axle: 315/80 R 22.5, 14mm/14mm/14mm/14mm tread * ZF Intarder 3 * Rear air suspension * DAF PXP all-wheel drive * Alloy wheels * Auxiliary heating * Automatic climate control * 1 bed * Radio * All information given without guarantee * More info and requirements on additional service * Repainting and retrofitting possible * Short-term/Export license plates available * Transfer and shipment possible * Assistance with customs and export documentation * Procurement of COC and EUR documents Fgedpfeu Ayt Ujx Abrsh * On the market since 1991 * Leasing and financing available. We have worked with various leasing companies for many years, so we can find the optimum financing for every customer. Even customers with weak credit can often be supported and connected with good leasing partners. * Own workshop * Wir sprechen Deutsch. * We speak English. * Mówimy po polsku. * Мы говорим по-русски. * Repainting in your desired color is possible in-house at a reasonable price and in good quality. * Are you located further away and unable to visit or inspect a truck in person? No problem, you are welcome to appoint an independent expert of your choice to carry out a technical and visual inspection. Should an unexpected deficiency arise, we can rectify it quickly and efficiently in our workshop. Furthermore, for a surcharge, we can deliver your selected used vehicle Europe-wide.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, The DL 45 transfer pump is an essential solution for businesses seeking to optimize liquid transfer across various sectors such as agriculture, the food industry, or chemicals. Thanks to its robust design, it guarantees reliable and long-lasting performance, ensuring efficient transfer of liquids between different containers. Indeed, this pump is perfectly suited to the demands of industrial environments, offering versatility that makes it indispensable. Moreover, its easy integration into existing production systems helps to reduce downtime, thereby increasing overall operational efficiency. With simplified maintenance, operators save time and can focus on other critical tasks. Furthermore, the DL 45 pump is ideal for high-volume transfers or more specific operations, delivering optimal performance with every cycle. In summary, this transfer pump is the perfect tool for professionals looking to improve their production process management while ensuring a smooth, uninterrupted workflow. With its proven reliability, it is a smart choice for maximizing efficiency and productivity. Technical specifications: Fgedju H Uvxspfx Abroh Manufacturer: Massilly QHA 00022 A pre-owned transfer pump Year of manufacture: 2018

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Features and technical specifications: - Robust, space-saving 2-belt wide-belt sander for demanding calibration and fine sanding applications - Consistent working height thanks to top-section adjustment - Working width: 1350 mm - Top sanding, with two sanding units - 1st unit equipped with grooved rubber contact roller of proven hardness - Pneumatically (program-controlled) adjustable contact roller, roller height steplessly adjustable via abrasive grit scale - 2nd unit with electronically-controlled segmented sanding pad, segment width 35 mm, featuring quick-change glide strips - Parallel spring-mounted, ground steel pressure roller at infeed Fgodpfxeuhiq De Abroh - Rubber-coated pressure rollers between sanding units and at outfeed - 15 kW (20 HP) motor, 400 V/50 Hz with soft start for reduced start-up current - Motorized, finely adjustable height setting with digital display - Belt tensioning, tracking and oscillation via pneumatics, compressed air consumption approx. 4 l/min - Optimum safety via automatic instant stop with disc brake in case of belt breakage - Workpiece feed motor 0.75 kW (1.0 HP) with fabric-reinforced rubber feed belt - Complete electrical system with contactor control; automatic star-delta start for main motor, motor protection and ammeter for monitoring stock removal - Pass-through height: 200 mm - Abrasive belt size: 1350 x 2000 mm Comfort features: - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with immediate feed stop and automatic elevation of the machine top section - Infinitely adjustable stock removal - Electronic feed regulation via operator panel, continuously variable 3 – 15 m/min - PLC control/programming with color touch screen and TEACH-IN memory (recorded at the push of a button, according to sanding result; no manual input required) - Pneumatic belt tracking control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated fast setting and feed solution - eco*-energy-saving mode - Fault diagnostics - Job and operating hours counters Machine in E-Plus version (RE) Including foldable outfeed table extension 1350 mm, without infeed plate Location: Solingen Availability: short notice

Stanje: novo, Performance: 15 kW Technical Specification: Hopper opening: 600 x 800 mm Hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Fgodpfx Abevwfhcjroh Rotor speed: 90 rpm Number of knives: 14 pcs + 2 pcs Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns concave / 30 x 30 mm, clearing knives Screen perforation: 15/20 mm Painting: Frame in RAL 5010, hopper in RAL 7016 (HoKuTech standard coating) Connected load: 400 V +/- 5 % / 50 Hz Including: Control cabinet (Rittal) with 5 m cable Electrical control (Siemens PLC) Star-delta start Rubber vibration dampers E-rotor with milled knife pockets in the profile Gearbox limit switch 1st knife row Hold-down device on the slider for long and large parts Large 40 x 40 mm knives for optimal material intake Very robust gearbox Special clearing knives to prevent lateral jamming Machine number: 510-5238 Manufacturer: Weima