Kk-Industries Cy3R-Hhs 330-20/25 nakup rabljenega (62.157)

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Ibjdpfowzzzfsx Aqusc Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: novo, Pressure: 40 Cylinder: fixed (not movable) Stroke: 350 mm Clearance between uprights: 900 mm Working speed: 4 mm/s Length: 1600 mm Width: 700 mm Height: 2050 mm Approx. weight: 430 kg Ibodpfx Aqowwnhqouec Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – comfortable control via hand lever and push button Adjustable maximum pressure – can be individually set for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured in accordance with current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work The image is for illustration purposes only.

Stanje: novo, Pressure: 320 Bending length: 3020 mm Frame gap: 2555 mm Installation height: 650 mm Stroke length (max.): 400 mm Throat depth: 450 mm Dimensions (LxWxH): 3785 x 2290 x 3100 mm Weight approx.: 14,450 kg 4 axes (Y1, Y2, X, R): Yes, all axes via CNC control Delem DA 66 T (2D graphic control) CNC crowning via control: Yes, via CNC control Delem DA 66 T (2D graphic control) Motor power: 30 kW Standard equipment: KK Kletzer Europa We have assembled a high-quality model for the European market. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPA XL The robust press brake EUROPA XL is characterized by its high precision, accuracy, and versatile range of applications. EUROPA XL offers a very large installation height and, consequently, a large stroke (cylinder travel). The throat depth is also above average, ensuring maximum flexibility. We focus on quality, which is also reflected in the control system. As a standard, we use the high-quality Delem DA 66 T (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R controlled via CNC. Naturally, the machine includes the CNC crowning control DELEM DA 66 T (2D graphic control). We also make no compromises with the upper tool and die, equipping the KKI EUROPA XL press brake with high-quality tools from EUROSTAMP Italy. Of course, every machine is only as good as its service. That is why we place emphasis on highly qualified staff with years of experience in CNC sheet metal processing. CNC axes: Y1, Y2, X, and R axis Control: DELEM DA 66 T (2D graphic control) Backgauge with double linear guidance and ball screw spindle CNC-controlled motorized crowning device Ibodpfsh Rwydex Aqusc Heavy-duty design; height adjustment with handwheel on linear guides 3 pcs. backgauge fingers Installation height: 650 mm Throat depth: 450 mm Stroke: 400 mm Laser safety device on the upper beam CE safety equipment Various options available Additional controls: ESA 640 2D 15'' touchscreen control   ¤ 4,520 ESA 675 W 3D 21'' touchscreen control (Windows Base)   ¤ 6,485 DELEM 66 T 2D 17'' touchscreen control (Windows Base)   ¤ 10,165 incl. DELEM 69 T 3D 17'' touchscreen control (Windows Base)   ¤ 16,350 KK-Industries GmbH Something for everyone!

Leto izdelave: 2021, stanje: rabljeno, Linija za proizvodnjo cevi Proizvajalec: Bazhou Wanxin Industrial and Trading Linija za proizvodnjo cevi, sestavljena iz: Naprava za odvijanje z dvojnim delovnim mestom Funkcija: Pasivno odvalja kolut Izvedba: Izvedba z dvema delovnima mesti in rotacijo za 180 stopinj, ročno nastavljanje Prednosti: hitro nalaganje, enostavno in priročno upravljanje Hidravlične škarje in strojna postaja za varjenje koncev Funkcija: Reže prednji in zadnji del, centriranje cevi in ponovno varjenje Izvedba: Ročne hidravlične škarje z iztegom, prednji in zadnji pritiskalni valji, prednji in zadnji centrirni valji, varilna naprava Način rezanja: hidravlične škarje Način oblikovanja z uporabo preše: dvojna cilinderska preša Način varjenja: ročno varjenje Naprava za shranjevanje trakov Funkcija: Za zagotovitev neprekinjene proizvodnje varjene cevi je treba po škarjah in varilni postaji namestiti shranjevalno enoto, da lahko shranjevalnik neprekinjeno dovaja trakove, medtem ko se material iz jeklene pločevine pripravlja za polaganje, odvijanje, rezanje koncev in varjenje. Izvedba: tip okvirja, obstajajo premični okvirji in fiksni okvirji (vključno z napravo za dovod) Hitrost dovoda: maks. 120 m/min Ibsdpszuz H Sjfx Aquoc Hitrost skladiščenja: maks. 200 m/min Dolžina skladiščenih trakov: 200 - 400 m Motor stiskalnega valja: AC 11 kW Stroj za oblikovanje in kalibriranje Višina delovne mize: +850 mm Moč: motor AC/DC: 160 kW, 1000 - 2000 vrt/min Reduktor: utrjevanje zobnika Razporeditev: Pasivni stroj za izravnavo s petimi valji, navpični valji za dovod materiala, oblikovanje z 7 horizontalnimi valji in 8 navpičnimi valji, vodenje, stiskanje, odstranjevanje ostrih robov, hlajenje in kalibriranje z 6 horizontalnimi valji in 5 navpičnimi valji, 1 kalibracijska postaja Kalibracijska postaja: 1 komplet naprav za glajenje, dve strani z 8 valji, na vsaki strani 4 valje. 30 mm, 40Cr, kaljenje, popuščanje in utrjevanje Horizontalna valjčna gred: 60 mm, ležaj na položaju 55, iz materiala 40Cr Toplotna obdelava horizontalnega valja: površinsko utrjevanje, HRC 50-55 Ležajna vodila: kovani jekel 45# Navpična valjčna gred: 40 mm, material 40Cr, kaljena, popuščena in utrjena Navpični in horizontalni valji - konstrukcija: portalna konstrukcija, širina odprtine: 120 mm, pritrditev horizontalnega valjčnega nosilca: nastavitev s spiralnim zobnikom Material horizontalnih in navpičnih valjčnih nosilcev: varjeni (žarjenje za odstranjevanje napetosti) Prestavna enota: zobnik: spiralni stožčasti zobnik Gred stiskalnega valja: 50 mm, 2 valja za stiskanje, nastavljiva z ročno vijačno palico Vodilna gred: 40 mm Rezalnik za odstranjevanje ostrih robov: 2 kos, en za delo in drugi kot rezervni Posoda za hlajenje Krožna žaga za hladno rezanje Funkcija: Krožna žaga za hladno rezanje je eden najpomembnejših strojev na liniji za proizvodnjo ERW cevi. Med proizvodnjo z visoko hitrostjo lahko cevi odreže na vnaprej nastavljeno dolžino. Tip: KK-5-50 Premer cevi: okrogle cevi 16-63,5 mm in ustrezne kvadratne in pravokotne cevi Dolžinska obdelava: poljubna dolžina med 1 - 6 m Debelina materiala: 0,6-2,5 mm Pogonski motor: servo motor 11 kW Yaskawa Motor za dovod: servo motor 2,9 kW Yaskawa Motor žage: 11 kW, motor AC z frekvenčnim spreminjalnikom Način dovoda: servo, večstopenjski nadzor hitrosti Nastavitev hitrosti: maks. 110 m/min Napetostna sila: pnevmatska Vlečna veriga Žagin list: 400 mm Model zobniškega pogona žage: KK-80 Hod žage (dolžina orodja): 3 m Dimenzije opreme: 4500 x 1500 x 1300 mm Transportni trak, miza in st

Stanje: novo, Sheet thickness: 6 mm Bending length: 3100 mm Top roll diameter: 210 mm Ibedpsd Ab Sdefx Aqujc Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated upper cover for easy material removal - Digital display for lower and side roll positions - Hydraulic alignment - Top and bottom rolls are driven by hydraulic system and gearbox - The vertical movements of the lower roll are hydraulically driven - Mobile control panel - Compliant with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Sheet thickness: 13 mm Bending length: 4100 mm Top roll diameter: 360 mm Technical Data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions Ibedpfjd Ab Rujx Aquec - Hydraulic positioning - Top and bottom rolls driven by hydraulics and gearbox - Vertical movements of the bottom roll are hydraulically powered - Mobile control panel - In compliance with CE regulations Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Center support EURO 13,600 - Side supports EURO 12,516 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Bending length: 1600 mm Sheet length: 1600 mm Top roll diameter: 140 mm Sheet thickness: 6 mm Technical specifications: - Hardened and polished rolls - Full body construction made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulic head cover for easy material removal - Digital display for lower and side roll position - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically driven - Mobile control panel Ibedpfx Aqjd Ab Smjuoc - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 4,580 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have an extensive list of references!

Stanje: novo, Sheet thickness: 8 mm Bending length: 1600 mm Top roller diameter: 190 mm Technical specifications: - Hardened and polished rollers - Complete body made of ST-52 steel - 4 rollers arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulic system and gearbox - Vertical movements of the lower roller are hydraulically driven - Movable control panel - In compliance with CE standards Ibjdpfx Aqod Ab Skousc Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 4,580 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roller - Adjustable lower roller support system (for special customer requests) We have numerous references!

Stanje: novo, Bending length: 2,600 mm Sheet thickness: 6 mm Upper roll diameter: 190 mm Sheet length: 2,600 mm Technical data: - Rear roll motorized - Conical bending device - Hardened and polished rolls Isdod Ab Nkjpfx Aqusbc - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Upper and lower rolls driven by brake electromotors and planetary gears in the gearbox - Portable control panel - In compliance with CE standards Options: - Lower roll driven by electric motor EURO 1,925 - Digital display for rear roll position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total power requirement: 18 kW Weight approx.: 9,200 kg Isdpfx Aqofl S Efjuebc Dimensions (LxWxH): 4,000 x 1,900 x 2,350 mm Our renowned brand KK kletzer CNC GUILLOTINE SHEAR, guided ram design Model 3213, offers everything required for perfect cutting operations. KK kletzer CNC-guided guillotine shear Featuring robust, durable mechanical and hydraulic systems, a precise CNC backgauge with ball screw, and a user-friendly CNC controller, KK kletzer guillotine shears are highly efficient production machines. Our standard portfolio covers shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters. Higher sheet thicknesses and cutting lengths are available upon customer request. Their exceptionally sturdy, fully welded frame accounts for the long service life of our guillotine shears. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, ensuring maximum cutting quality. By entering the sheet thickness and material type, the CNC control automatically determines the required cutting angle and cutting gap. Our renowned brand KK kletzer CNC GUILLOTINE SHEAR, guided ram design Model 3213, offers everything required for perfect cutting operations. Technological advantages: - Fast and precise cuts - Stable, long-lasting frame structure - Automatic cutting gap and angle adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from leading manufacturers - Low unit costs Technical data: - Sheet thickness: 13 mm - Cutting length: 3,280 mm - Cutting angle: 0.3 – 2° - Backgauge: 1,000 mm via CNC - Motor power: 18 kW - Length: 4,000 mm - Width: 1,900 mm - Height: 2,350 mm - Weight: 9,200 kg Features: • Guided ram design • CNC controller ELGO P 40 T - Backgauge - Cutting angle - Cutting gap - Cutting length • Ball screw for backgauge positioning • Ball transfers in the table • Side gauge • 2 support arms • 1,000 mm flip-up finger guard We have numerous references!

Stanje: novo, Bending length: 2050 mm Sheet thickness: 3 mm Top roller diameter: 110 mm Ijdpfxsd Ab N Ae Aquebc Technical data: - Rear roller motor-driven - Cone bending device - Hardened and polished rollers - The entire frame made of St 52 steel - Main motor with braking system - Top and bottom rollers are driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron body - Rear and bottom roller movement operated manually - In compliance with CE standards Options: - Top roller driven by electric motor EUR 1,260 - Digital display for rear roller position EUR 1,010 - Hardened rollers EUR 1,136 - Special voltage EUR 480 - Sheet feeding table - Bottom roller driven by electric motor We have a large number of references!

Stanje: novo, Sheet thickness: 35 Bending length: 4100 Top roll diameter: 540 Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movements of the bottom roll are hydraulically driven - Mobile control panel - In accordance with CE standards Options: - Variable rotation speed: EUR 6,940 - Material feed table: EUR 5,100 - Oil cooler: standard - Central support: EUR 18,750 - Side supports: EUR 17,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requests) Iedpsd Ab N Ijfx Aqujbc We have numerous references!

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ekstruder model EX20-25d je zasnovan za laboratorijsko uporabo in doseže zmogljivost plastificiranja 5 kg/h. Ekstruder se lahko uporablja za razvoj materialov, majhne serije ali kot ekstruder za filament. Standardno je ta model ekstruderja opremljen z bimetalnim valjem in skozi kaljeno polžnico za visoke temperature (do 400°C). Ijdpsiv H Eksfx Aquebc Tako je mogoče obdelovati tudi abrazivne surovine, tehnične plastike, PEEK, kovinske zmesi, keramiko ali z vlakni ojačane materiale itd. Razpoložljive stroje si lahko ogledate v našem obratu v Königswinterju. Na voljo so tudi druge dimenzije strojev – kontaktirajte nas za več informacij.

Stanje: novo, Bending length: 2050 mm Sheet thickness: 1.8 mm Top roller diameter: 95 mm Sheet length: 2050 mm Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roller can be swung out to the side for easy material removal - Cone bending device - Rear and lower roller movement up and down manually by handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roller - Digital display for rear roller position - Body covering EURO 432,-- Ijdpfod Ab Tujx Aqujbc - Hardened rolls EURO 940,-- - Variable rotation speed We have numerous references!

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 930 Ah, napetost baterije: 48 V, skupna višina: 770 mm, skupna dolžina: 1.220 mm, skupna širina: 500 mm, Tested forklift battery for your truck – 48V 6PZS 930Ah – DIN C + 1 year warranty + Includes Aquamatic filling system + Includes end discharge device & REMA 320 connector (alternative connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 500 mm Height 770 mm Weight: approx. 1,350 kg Suitable for the following models and others: Linde A (1250) – 5022-00 Ibsdpfjy Rnttox Aqujc Linde A – 5224-00 Linde R 16 – 1120-00 Linde R 16 – 1120-00 – front battery change Linde R 16 HD – 1120-00 Linde R 16 HD – 1120-00 – front battery change Linde R 20 – 1120-00 Linde R 20 – 1120-00 – front battery change Linde R. 20 – 1122-00 Linde R 20 F – 8923-00 Linde R 20 F – 8923-00 – side battery change Linde R 20 G – 1120-00 Linde R 20 G – 1120-00 – front battery change Linde R 20 HD – 1120-00 Linde R 20 HD – 1120-00 – front battery change Linde R 20 W – 1120-00 Linde R 20 W – 1120-00 – front battery change Linde R 25 – 1120-00 Linde R 25 – 1120-00 – front battery change Linde R 25 F – 8922-00 Linde R 25 F – 8922-00 – side battery change Linde R 25 F – 8922-00 – vertical battery change Linde R 25 F – 8923-00 – side battery change Linde R 25 F – 8923-00 – vertical battery change Linde R 25 W – 1120-00 Linde R 25 W – 1120-00 – front battery change Still FM 20 Still FM-X 20 Still FM-X 25 Jungheinrich ETV 214 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV 460 Toyota/BT VR 1.25 Toyota/BT VRE 150 Crown ESR 4000-1.6 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5260 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UHX 200 Caterpillar NR2042H Caterpillar NR20NH Caterpillar NR25N2X Hyster R2.0H Hyster R2.0HD Hyster R200HD Mitsubishi RB14-25 Mitsubishi RB20NH Yale MR 25 Additional common battery sizes available upon request. Transport possible.

Stanje: rabljeno, Leto izdelave: 2019, Pregled Ta popolna pivovarna, vključno s fermentacijskim in ležalnim kletom ter KEG-polnilnico, je bila nameščena leta 2019 in večinoma izdelana pri kitajskem proizvajalcu Shandong Yuesheng. Paket vključuje različne naprave, potrebne za obratovanje. Pivovarna se sprosti, ker trenutni lastnik zaradi starosti zapira obrat. Pivovarna je do zadnjega delovala brezhibno. Naprava je še vedno postavljena in priključena ter si jo je možno kadarkoli osebno ogledati. Obseg dobave - 4 enote pivovarskega sistema | Shandong | 20-25 HL | 2019 - 1x drozgalni kotel - 1x filtrirni kotel - 1x vrelni/kuhalni kotel - 1x whirlpool - Ročni zaporni ventili - Hladilni sistem fermentacijskih tankov je avtomatiziran - Mlin za slad | Shandong | 2019 - Generator pare | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 - 200 kg/h - Oljno ogrevanje, lahko se uporablja tudi na plin z zamenjavo gorilnika - Hladilnik pivine, dvostopenjski | Shandong | 2019 - 2x hladilni agregat (glikol) | 2019 - 2x 28 kW - Glikolni rezervoar - Rezervoar za vročo vodo - 6x fermentacijski tank | 2760 l | 2019 - 3 bara, izolirani z plaščnim hlajenjem, CIP-pripravljeni - 12x ležalni tank | 2760 l | 2019 - 3 bara, brez lastnega hlajenja, uporabljeni v posebni hladilni komori - Reverzna osmoza - Kompresor | JAN | 585 l/min | 2020 - KEG-polnilnica - 1x pralni stroj za sode z avtomatskim dopolnjevanjem lužnine in parnim ogrevanjem - 1x polnilni stroj za KEG - Do 70 sodov/h - Fitting: tip S, košarasti spoj - Siemens S7 - Demontaža in nakladanje sta vključena v ceno Prav tako so na voljo za nakup: hladilni kontejnerji, točilne naprave, KEG-sodi itd. Ijdoyb N N Aopfx Aqusbc

Stanje: zelo dobro (rabljeno), Filling machine TM Industry Belgium M 25 for filling liquids Filling range: 0.5–30 kg Very good condition, directly from production! Iedpfx Aeiu H Uvoqujbc

Stanje: novo, Sheet thickness: 1.8 mm Bending length: 2050 mm Top roll diameter: 95 mm Technical specifications: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be swung out sideways for easy material removal - Cone bending device - Movement of the rear and lower rolls manually up and down with handwheel - Portable control panel - In compliance with CE standards Options: - Rear roll with motor: EUR 825.-- - Digital display for rear roll position: EUR 1,010.-- Ijdsd Ab Tvopfx Aqusbc - Frame cover: EUR 432.-- - Hardened rolls: EUR 940.-- We have many references!

Stanje: novo, Pressure: 320 Bending length: 3020 mm Distance between uprights: 2555 mm Installation height: 650 mm Stroke length (max.): 400 mm Throat depth: 450 mm Dimensions (LxWxH): 3785x2290x3100 mm Approx. weight: 14,450 kg 4 axes (Y1, Y2, X, R): Yes, all axes CNC-controlled via Esa S630 crowning controller (2D graphical control) Ibedpjd Ehikjfx Aquoc CNC crowning control: Yes, via CNC crowning controller Esa S630 (2D graphical control) Motor power: 30 kW Standard Equipment: KK Kletzer Europa We have assembled a high-quality model for the European market: The CNC press brake KK-Industries made in Turkey. Model: KKI EUROPA XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy, and versatile application possibilities. EUROPA XL features a very large installation height, resulting in an extended stroke (cylinder travel). The throat depth is also above average, maximizing working flexibility. We focus on quality, which is also reflected in the control system. As standard, our machines come equipped with the premium Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes, all operated via the control unit. Naturally, the CNC crowning control Esa S640 (2D graphical control) is also included as standard. For the upper tool and die, we make no compromises, equipping the KKI EUROPA XL CNC press brake with high-quality tooling from EUROSTAMP Italy. Of course, a machine is only as good as its service—hence, we place great emphasis on highly qualified staff with extensive experience in CNC sheet metal processing. - CNC axes Y1, Y2, X, and R - Esa S640 controller (2D graphical control) - Back gauge with double linear guide and ball screw spindle - Motorized crowning system with CNC control - Heavy-duty design, height adjustment via handwheel; heavy-duty linear guidance for models from 175 tons - Laser protection device on the upper beam - CE safety equipment - Various options available Additional control units: ESA 640 2D 15'' touchscreen control €4,520 ESA 675 W 3D 21'' touchscreen control (Windows base) €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows base) €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows base) €16,350 KK-Industries GmbH Something for everyone!

Stanje: novo, Pressure: 320 Bending length: 6050 mm Frame gap: 5100 mm Installation height: 650 mm Max. stroke length: 350 mm Throat depth: 450 mm Weight approx.: 23,100 kg 4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic control) CNC crowning via control: Yes, with Esa S630 (2D graphic control) Motor power: 30 kW Technical Specifications XL 60320 Unit Bending Length: 6050 mm Bending Force: 320 t Approach speed: 80 mm/sec Bending speed: 10 mm/sec Return speed: 80 mm/sec Stroke: 350 mm Open height (D): 650 mm Throat depth (E): 450 mm Distance between housings (B): 5100 mm Length (L): 6865 mm Width (W): 2280 mm Width without front gauge (Y): 1760 mm Maximum height: 3110 mm Main motor: 30 kW Hydraulic oil tank: 400 l Weight: 23,100 kg The robust EUROPA XL press brake stands out due to its high precision, accuracy and versatile range of applications. Europa XL offers an extremely large open height, resulting in an extended stroke (ram travel). The extra-large throat depth allows for maximum working space with minimum restrictions. We set a high value on quality, which is also reflected in the control system. Our standard solution features the high-quality Esa S640 (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X and R, all controlled via the Esa S640 system. Of course, CNC crowning control via Esa S640 (2D graphic control) is also included. When it comes to upper tools and dies, we make no compromises. The CNC press brake KKI EUROPA XL comes equipped with premium tooling from EUROSTAMP (Italy).Naturally, every machine is only as good as the service that comes with it. For this reason, we emphasize highly qualified staff with extensive experience in CNC sheet metal processing. Features: CNC axes: Y1, Y2, X, R Esa S640 (2D graphic control) Backgauge with double linear guides and ball screw Motorized CNC crowning device Heavy-duty stroke adjustment with handwheel; fully guided on linear rails from 175 t Ibodpfed Ehh Tsx Aqusc Laser safety device on upper beam CE-certified safety equipment Various options available Additional controller options: ESA 640 2D 15" touchscreen control (included) ¤ 4.520,-- ESA 675 W 3D 21" touchscreen control (Windows based) ¤ 6.485,-- DELEM 66 T 2D 17" touchscreen control (Windows based) ¤ 10.165,-- DELEM 69 T 3D 17" touchscreen control (Windows based) ¤ 16.350,-- KK-Industries GmbH There is something for everyone!

Stanje: novo, Pressure: 220Bending length: 3020Frame gap: 2550Clear height: 600Stroke length (max.): 350Throat depth: 450Dimensions (LxWxH): 3745x2290x3055Approx. weight: 11,2504 axes (Y1, Y2, X, R): Yes, all axes controlled via Delem DA 66 (2D graphical control)CNC crowning via control: Yes, through the Delem DA 66 CNC controller (2D graphical control)Motor power: 22Technical specificationsXL 30220UnitBending length: 3020 mmBending force: 220 tLowering speed: 140 mm/sBending speed: 10 mm/sReturn speed: 130 mm/sStroke: 350 mmClear installation height / daylight (E): 600 mmThroat depth (D): 450 mmGap between frames (B): 2555 mmMachine length (L): 3745 mmMachine width (W): 2290 mmWidth without front stop (Y): 1720 mmMaximum height: 3055 mmMain motor: 22 kWOil tank capacity: 300 lMachine weight: 11,800 kg Model: KK Kletzer EUROPA XL The robust EUROPA XL press brake stands out thanks to its high precision, accuracy, and versatile application options. The EUROPA XL offers a very large clear height and, as a result, a long stroke (ram travel). The throat depth is also above average, providing maximum flexibility with minimal limitations. Ibsdjd Edhlopfx Aquoc We focus on quality, reflected in the machine’s control system. As a standard controller, we use the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes via the controller. Naturally, CNC crowning is also integrated via the Esa S640 (2D graphical control). We make no compromises on the upper tooling and die either, equipping the KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Of course, every machine is only as good as its service support. For this reason, we put a strong emphasis on highly qualified personnel with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with double linear guides and ball screw Motorized crowning system with CNC control Heavy-duty design, height adjustment via handwheel; from 175 t up, heavy version on linear guide Laser protection system on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15" touchscreen control                                                        ¤ 4,520,-- incl. ESA 675 W 3D 21" touchscreen control (Windows based)                       ¤ 6,485,-- DELEM 66 T 2D 17" touchscreen control (Windows based)                    ¤ 10,165,-- DELEM 69 T 3D 17" touchscreen control (Windows based)                    ¤ 16,350,-- KK-Industries GmbH There is something for everyone!

Stanje: rabljeno, prevoženi kilometri: 141.755 km, moč: 132 kW (179,47 KM), prva registracija: 12/2019, vrsta goriva: dizel, skupna masa: 7.200 kg, naslednji pregled (TÜV): 06/2027, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 8.880 mm, skupna širina: 2.600 mm, skupna višina: 3.430 mm, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, Hvala za vaše zanimanje za eno naših vozil. Mi, ALLROUND Autovermietung GmbH, vam ponujamo dobro vzdrževano vozilo za nakup. Ibedpfszv Az Tjx Aquoc Če ste zainteresirani za to vozilo, nas prosimo kontaktirajte po telefonu ali e-pošti, da se dogovorimo za termin ogleda. Vozila niso vedno takoj na voljo v našem dvorišču. Posebna oprema: Paket za odlaganje, predal na armaturni plošči z USB-priključkom, avdio sistem: digitalni avdio sistem (DAB) z USB in prostoročno napravo Bluetooth, dodatna polica na strehi z DIN-predalom, avtomatska klimatska naprava, volan (usnje), zadnji prečni nosilec na koncu šasije, sedeži v kabini: udoben voznikov sedež (hidravlično nastavljiv) Dodatna oprema: Vzglavnik na voznikovi strani, sistem za nadzor zdrsa pogonskih koles (ASR), izvedba: serija C, zunanja ogledala, električno nastavljiva in ogrevana, dolga zunanja ogledala, za širino vozila 2350 mm, pomočnik pri zaviranju, elektronska porazdelitev zavorne moči, digitalni tahograf, zatemnjeno vetrobransko steklo in stranska okna, generator 150 A, menjalnik – avtomatik Hi-Matic (8 stopenj), oprijemalo na A-stebričku, karoserija/nadgradnja: tovorni prostor, kombinirani instrument z zaslonom Pixel-Matrix, rezervoar za gorivo: 90 l, nastavitev dosega žarometov, motor 3,0 l - 132 kW dizel, priprava za radio z zvočniki, medosna razdalja 5100 mm, rezervno kolo s pnevmatiko, nosilec za rezervno kolo med vzdolžnimi nosilci, emisijski standard Euro 6, sedeži v kabini: dvojni sedež za sopotnika z vzglavniki, opozorilo za vzdrževanje, dovoljena skupna masa 7,2 t Vozilo je v našem zunanjem skladišču, zato nas prosimo kontaktirajte za dogovor o ogledu. Hvala! Pridržujemo si pravico do sprememb cen, tipkarskih napak in napak ter do prodaje medtem.

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Ibsdpfxswrkctj Aquoc Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: novo, Pressure: 100 Bending length: 2500 mm Frame width: 2100 mm Installation height: 365 mm Stroke length (max.): 180 mm Throat depth: 300 mm Dimensions (LxWxH): 3760 x 2150 x 2450 mm Approx. weight: 6500 kg Motor power: 5.5 kW Standard equipment: KK-Industries GmbH has participated in a production and now independently manufactures press brakes and guillotine shears according to its own specifications. We have assembled a high-quality model for the European market. The CNC press brake KK Kletzer Europa Compact, made in Bursa, Turkey Model: KK Kletzer Europa Compact The powerful entry-level press brake KK Kletzer Europa Compact is characterized by its high precision, accuracy, and versatile application possibilities. We rely on quality, which is also reflected in the control system. As standard control, we use high-quality controllers from Italy (2D 10) with extremely simple programming. Furthermore, the KK Kletzer Europa Compact press brake is equipped with Y1, Y2, X CNC axes via the controller. Iodpfod Iy Tvjx Aquobc We make no compromises when it comes to the top tool and die, equipping the KK Kletzer Europa Compact CNC press brake with quality tooling from EUROSTAMP Italy or Rolleri Italy. Of course, every machine is only as good as its service. For this reason, we focus on highly qualified employees with extensive experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X 2D 10 controller Backgauge with double linear guide and ball screw spindle Centrally adjustable crowning device 2 heavy-duty front support arms, height-adjustable on linear guides Laser safety device on the upper beam CE safety equipment Options: CNC R-axis EUR 5,231 CNC crowning EUR 4,658 Distributed by: KK-Industries GmbH Tel.: 0043 (0)664 380 7776 Something for everyone!

Stanje: novo, Pressure: 220 Bending Length: 4050 mm Frame Gap: 3550 mm Installation Height: 600 mm Stroke Length (max.): 350 mm Throat Depth: 450 mm Dimensions (LxWxH): 4740 x 2290 x 3050 mm Approx. Weight: 13,350 kg 4 Axes (Y1, Y2, X, R): Yes, all axes via Esa S630 (2D graphical control) CNC crowning via control: Yes, via Esa S630 (2D graphical control) Motor Power: 22 kW Technical Specifications Model: XL 40220 Unit Bending length: 4050 mm Bending force: 220 t Approach speed: 140 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation/Daylight Height (E): 600 mm Throat Depth (D): 450 mm Frame gap (B): 3550 mm Machine Length (L): 4740 mm Machine Width (W): 2290 mm Width without front gauge (Y): 1730 mm Max. Height: 3050 mm Main Motor: 22 kW Hydraulic Tank Volume: 300 l Machine Weight: 13,200 kg Model KKI EUROPA XL The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities. The Europa XL features a very large installation height and, as a result, a long stroke (cylinder travel). The throat depth is also exceptionally large to minimize restrictions. We focus on quality, which is also reflected in the control system. As a standard, we provide the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R via the control system. CNC crowning via Esa S640 (2D graphical control) is, of course, also included. With the top and bottom tooling, we make no compromises: the KKI EUROPA XL CNC press brake comes equipped with premium tools from EUROSTAMP Italy. Naturally, every machine is only as good as its service. For this reason, we place great importance on highly qualified personnel with many years of experience in CNC sheet metal processing. CNC Axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with twin linear guides and ball screw Powered crowning device with CNC control Heavy-duty height adjustment via handwheel; heavy-duty linear guides from 175 t onwards Laser protection system on the upper beam CE-certified safety equipment Various options available Other Control Systems Available: ESA 640 2D 15'' touchscreen control — €4,520 incl. ESA 675 W 3D 21'' touchscreen control (Windows base) — €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows base) — €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows base) — €16,350 Isded Ehicjpfx Aqusbc KK-Industries GmbH There’s something for everyone!