3-valjni stroji za valjanje pločevine z električnim pogonom

KK-Industries CYL 110-20/3.0

Stanje: novo, - for standard-sized crates (LxWxH = 1200x1000x970) Motor power: 1.5 (2.0) kW (HP) Electrical connection: 400V 50Hz (3-phase) Electrical fuse protection: 16 A Length: 1670 mm Width: 1460 mm Height: 1280 mm Feed height: 850 mm Dwjdpjb I Sx Eefx Apwec Weight: 350 kg Material: 1.4301 / AISI 304 Lifting capacity: up to 550 kg / crate Duration per tilting operation: 15 sec. Discharge height for mash: 900 mm Discharge width for fruit: 500 mm

Stanje: potreben popravila (rabljeno), Leto izdelave: 2016, obratovalne ure: 90 h, Funkcionalnost: omejena funkcionalnost, vrsta goriva: dizel, moč: 44 kW (59,82 KM), nazivna moč: 44 kW (59,82 KM), neprekinjena moč: 44 kW (59,82 KM), neprekinjena (navidezna) moč: 55 kVA, For sale: Diesel generator ETT-55E (55 kVA) Condition: Used. The cooling pump is not working, oil is entering the engine, and the oil pump needs replacement. Otherwise, technically maintained. Can be started upon request. An additional new fuel pump is included. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and sound-insulated canopy. Suitable for backup power supply or continuous use in industrial or construction settings. Technical specifications: Model: ETT-55E Operating hours: 90 hrs Power (Standby): 55 kVA / 44 kW Power (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4-cylinder, water-cooled) Generator (alternator): WHI224D, brushless, with Automatic Voltage Regulation (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 Speed: 1500 rpm Cooling: Water-cooled Fuel consumption: ~10 L/hour (at 100% load) Fuel tank capacity: 260 L (up to 8 hours of continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Dwodpsxlngaofx Apwjc Country of origin: Turkey Control & Equipment: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator management Protection against overvoltage, overload, and low oil pressure Sound-insulated canopy – reduced noise level Manual or automatic operating mode Application: The generator is suitable for: - Industrial enterprises, warehouses, production facilities - Construction sites and mobile workplaces - Backup power supply for hotels, hospitals, office buildings, or farms A reliable solution where a stable, uninterrupted power supply is required. If you have any further questions – please feel free to contact us.

Stanje: novo, Table diameter: 490 mm Table load capacity: 300/150 kg Swivel range: 0-90° manual Table load, horizontal: 300 kg Table load, vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.1 t Space required: approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a hollow shaft in the turntable. This feature significantly expands the options for flexible positioning and circumferential welding of your component. For example, this is particularly advantageous when welding with backing gas. Utilising these tilting rotary tables can increase your production rate and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Stepless speed control Dedpfx Aogvkktepwswc - Very high stability – compact model - Through-hole in the turntable - CE marking

Stanje: novo, Fastech 3-Roller Round Bending Machine FRM 1050 x 90 Technical Specifications: Special features included in price: - Hardened rollers - Motorized rear roller adjustment - Digital display Dwjdpfxshzq Dbs Apwsc Sheet width: 1050 mm Sheet thickness: max. 3.3 mm Sheet thickness (pre-bending): 3.0 mm Roller length: 1050 mm Roller diameter: 90 mm Minimum bending diameter: 130 mm Weight: 475 kg Dimensions (L x W x H): 1750 x 800 x 1130 mm Motor: 1.1 kW Equipment: - Upper and lower rollers electrically driven - Swing-out upper roller - Device for conical bending - Asymmetric roller arrangement - Self-braking main motor - Separate control and operator panel - Safety rope Values apply for St-37 / 240 N/mm² CE marking

Stanje: dober (rabljeno), Trough Vibrator, Vibratory Finishing System, Vibratory Finishing Machine, Vibratory Trough Finisher, Trowalizing System, Continuous Vibrator, Vibratory Conveyor, Oscillating Conveyor -Manufacturer: circlon, round vibratory trowal-vibrator with soundproof hood -Total volume: 230 liters -Type: CLS-230 -Work bowl: elastically mounted -Working bowl width: 250 mm -Outlet: approx. 200 x 260 mm -Working bowl height: 510 mm -Features: manual separation flap, stepless motor speed via variator gearbox, liquid connection -Machine for: deburring, polishing, edge rounding -Transport dimensions: 1700/1600/H2240 mm -Total weight: 1150 kg Dsdpfx Apsiy Ef Aswswc

Stanje: novo, Leto izdelave: 2026, - Capacity: 2070 x 6 mm - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Hardened rolls - Cone rolling - Swing-out top roll - Centralized lubrication system - Brake motor - Emergency stop Dodpfx Apjlht N Ijwewc - Documentation - 400V

Stanje: novo, Premer mize: 550 mm Nosilnost mize: 500 kg Dwodoh D Svkopfx Apwsc Območje vrtljivosti: 135 stopinj Nastavitev nagiba: ročna/strojna, motorizirana Največje število vrtljajev: 5 vrt/min, brezstopenjsko Nosilnost mize: 250 kg, vertikalno Skupna potrebna moč: 0,8 kW Masa stroja: približno 245 kg Potreben prostor: približno 820 x 730 x 710 m Vrtljiva varilna miza z: - nožnim stikalom - možnost nagiba/vrtljivosti z roko - hitrost brezstopenjsko nastavljiva - prenos varilnega toka 250 amperov - luknja v plošči mize: 40 mm.

Stanje: novo, Table diameter: 900 mm Table load capacity: 1 t Swivel range: 0–135 degrees Eccentricity: 200 mm Table rotation speed: 0.12 – 1.2 rpm Torque: 2000 Nm Total power requirement: 0.75 kW Space requirement approx. 1.5 x 1.02 x 0.9 m The D-HB series rotary tilt tables feature a heavy-duty design for exceptional stability, making them particularly suitable for heavy and precise positioning tasks as well as rotary welding operations. Dedpfx Apogvkikowowc Features: - Easy installation - Increased productivity - Improved weld quality due to optimal positioning and speed control - Reduced crane hours and handling times while enhancing workplace safety - Self-locking gearbox prevents overrun or backlash under eccentric loads - Electronic components by Schneider, Siemens, and Delta - Infinitely variable, frequency-controlled turntable speed - High stability through robust construction - CE certification - The D-HB series includes a remote control with foot pedal for left-right / start-stop operations.

Stanje: novo, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10,600 kg Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar Dwsded Ab H Ijpfx Apwec Bending performance: 13.0 mm » with 3x top roll diameter Pre-bending: 10.0 mm » with 1.5x top roll diameter Top roll diameter: 270 mm Lower roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of the top and bottom rolls via planetary gear • Digital readout for side roll positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic lower roll adjustment via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment in accordance with CE directives See catalogue via the following link:       Important notes for conical rolling: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must exceed 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Sheet length: 2050 mm Sheet thickness: 3 mm Total power requirement: 2.2 kW Weight approx.: 1,500 kg Dimensions (LxWxH): 3,200 x 750 x 1,000 mm Technical Data Djdpfx Apod Ab H Aowjwc Roller diameter: 130 mm Equipment • 3 rollers • Asymmetric roller arrangement – with pre-bending • 2 driven rollers via brake motor • Upper roller can be swung out to the front • Forward/reverse operation • Conical rolling by tilting the rear roller • Movable control panel Operating instructions in GERMAN Catalogue available at the following link: