3-valjni stroji za valjanje pločevine z električnim pogonom

KK-Industries CY 95-20/1.5 with motor

Stanje: novo, Table length: 1200 mm Table width: 1200 mm Table height: 900 mm Table load capacity: 3000 kg Machine weight approx. 0.32 t Ndodjd Iinfopfx Acvjd Dimensions (L x W x H): 1.2 x 1.2 x 0.9 m Welding Table / Perforated Table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Plasma nitriding provides a hard surface layer. Height adjustable from approx. 880 – 980 mm Reinforced and ribbed underside for stability. Including floor mounting/base bearing Accessories optional!!!

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. Nodpefg E Hpjfx Acvedd - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Leto izdelave: 2025, Delovno območje: 6100 mm × 1524 mm / 4000 mm × 1524 mm / 3048 mm × 1524 mm Izhodna moč laserja: 3000 W / 2000 W / 1500 W / 1000 W Natančnost pozicioniranja: ±0,05 mm Ponovna natančnost pozicioniranja: ±0,03 mm Maksimalna usklajena hitrost: 91 m/min Maksimalno pospeševanje: 1G 1. Raztegnjen aluminijast nosilec Letalsko-kakovosten material z izboljšano togostjo bistveno zmanjšuje deformacije nosilca pri visokih hitrostih ter povečuje občutljivost in učinkovitost obdelave pri visokih hitrostih. 2. Posteljna konstrukcija z ugreznjenimi spojkami (Tenon-and-mortise) Uporablja tradicionalno kitajsko spojno tehniko "tenon and mortise" za večjo nosilnost. Priključne točke za varjenje in nosilna konstrukcija zagotavljajo dolgoletno stabilnost delovanja. Varjena konstrukcija prispeva k boljši absorpciji vibracij, zmanjša odklone ob tresljajih ter omogoča natančnejše rezanje. 3. Dvojni avtomatski centrirni električni vpenjalniki Dvojna električna vpenjalnika z avtomatsko centrirno funkcijo sta enostavna za uporabo in zahtevata minimalno vzdrževanje. Nov motor omogoča natančen nadzor. Modularne komponente vpenjalnika so samostojno razvite ter jih je mogoče hitro zamenjati. Ndsdpfx Aceg Eglpjved 4. Avtomatska funkcija ostrenja laserske glave Z nastavitvijo perforacijske in rezalne žariščne razdalje posebej je rezanje natančnejše. Primerna za različne žariščne razdalje – položaj žarišča se samodejno prilagodi glede na debelino posameznih pločevin. 5. Funkcija alarma pri nizkem tlaku plina Sproten nadzor tlaka plina in javljanje nepravilnosti zagotavljata kakovost in natančnost reza ter pravočasno opozorita upravljavca na potrebo po zamenjavi plina.

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. Nedpjfh R N Dsfx Acvsdd The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: novo, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Approx. Weight: 480 kg Total Power Requirement: 1.1 kW Bending Radius: 2 mm Nsdpfod Eqqqox Acvodd Sheet Thickness: 3 mm Sheet Length: 1,050 mm Technical Data Sheet Rolling Machine Roller Diameter: 90 mm Rolling Speed: 6 m/min • Asymmetric roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment via handwheel • Swiveling top roller • Conical rolling device • Double foot switch for forward/reverse operation • Lower and rear rollers with wire grooves • Operating manual in GERMAN EXTRA: hardened rollers EUR 900,-- See the catalogue at the following link:

Leto izdelave: 2022, Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Ndjdpog Tzbhefx Acvsd Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: novo, Leto izdelave: 2025, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table size: 560 mm - Left door: 170 mm - Electrically tiltable Njdpfx Acogg Rb Tevjdd - Foot pedal - Documentation - 230V

Stanje: novo, Capacity: 300 kg Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg per piece Rotational speed: 22 rpm Filling level: 40–50% Color: Blue RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Ndjdpfsu Uu T Rex Acvod Dimensions (L x W x H): 1 x 1.7 x 1.29 m New deburring or scouring drum (deburring machine) designed for safe and efficient deburring of workpieces. 6-sided drum lined with 36 mm wear-resistant, vulcanized rubber. Roll-up cover for protection against the rotating drum, robust construction, easy operation. Control panel with timer, hour counter, main and emergency stop switches, and signal light. The maximum fill level is 40% of the drum volume, corresponding to 300 kg (200 kg workpieces + 100 kg deburring media such as manganese steel balls or cast iron pentagons). These are available from Sideros: manganese steel balls €400 per 100 kg & cast iron pentagons €950 per 100 kg. Dust extraction unit Sideros ECO A (see photo 8) optionally available for €1,900 + VAT. The manufacturer recommends sending 100 kg of sample material for test deburring to the Italian plant before ordering. Otherwise, the manufacturer accepts no responsibility for the deburring results. Warranty: 12 months for single-shift operation. When replacement parts are supplied, defective parts must be returned. Downtime of the machine is not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: dober (rabljeno), Leto izdelave: 1986, številka stroja/vozila: 8618030, Offer 25182 Technical Specifications: - Max. working width: 2,040 mm - Max. material thickness: 4 mm - Roller diameter (each): 140 mm - Stroke: 70 mm - Rear and lower rollers adjustable for conical bending - Upper and lower rollers driven by motor - Working speed, forwards and backwards: 6 m/min - Drive: 380 V / 6.2 kW - Space requirement (approx.): W 3,560 x H 1,100 x D 870 mm - Weight (approx.): 1,700 kg - Includes: - Asymmetric roller arrangement - Crowned, through-hardened rollers - Manual rear roller adjustment - Pre-bending Ndedpjwq It Tsfx Acved - Swiveling upper roller - Electric foot switch for forward and reverse operation

Leto izdelave: 2023, Stanje: novo, IMMEDIATE AVAILABILITY! Njdpfx Acen Smclevodd Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface treatment of metallic and non-metallic workpieces. These machines feature a large screening area and allow for easy separation of workpieces from the media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Stand for control panel - Rinsing pipe (various types) Images are for reference only. Optional accessories are available at an extra charge.