Jmc Recycling 500 Hd nakup rabljenega (19.809)

Stanje: novo, Rexroth Indramat MHD095C-058-PG0-AN Permanent Magnet Motor SN: MHD095-00347, unused, 100% fully functional, scope of delivery as per photos. Ksdpfeldlqlsx Al Nolr

Stanje: novo, Leto izdelave: 2026, skupna masa: 4.750 kg, premer rotorja: 350 mm, število rezil: 62, skupna dolžina: 1.850 mm, skupna višina: 2.170 mm, skupna širina: 2.670 mm, dolžina rotorja: 920 mm, širina rotorja: 350 mm, moč: 50 kW (67,98 KM), trajanje garancije: 12 meseci, širina rezila: 50 mm, premer rezila: 50 mm, Serija MIZAR SSH - Enoosni drobilnik za kable, plastiko in e-odpadke Nadzorovano zmanjševanje velikosti z inteligentnim sistemom hranjenja Serija MIZAR SSH je zasnovana za učinkovito in nadzorovano drobljenje široke palete materialov, vključno s kabli, tekstilom, plastiko, pnevmatikami, elektronskim odpadom in različnimi vrstami kovin. Drobilniki SSH, zasnovani za zanesljivost, prilagodljivost in dosledno izhodno velikost, so idealni za obrate za recikliranje, ki zahtevajo enotno pripravo materiala pred granulacijo ali nadaljnjo obdelavo. PAMETNA TEHNOLOGIJA DROBLJENJA IN PREDNOSTI • Enojni rotor – največji nadzor: Po meri zasnovana rezila iz visoko legiranega jekla, odpornega proti obrabi, nameščena na robustni enojni gredi, zagotavljajo agresiven vnos in učinkovito zmanjšanje velikosti v mešanih tokovih materialov. • Programabilni hidravlični potiskalnik (Pusher): Inteligentni hidravlični sistem za dovajanje nenehno potiska material proti rotorju, s čimer optimizira prepustnost in preprečuje vrtenje v prostem teku. • Samodejni sistem proti zagozditvi: V primeru preobremenitve ali blokade rotor samodejno obrne smer. To ščiti stroj in zagotavlja nemoteno delovanje. • Izhodna velikost nadzorovana s sitom: Močno sito (screen), nameščeno pod rotorjem, določa končno velikost delcev. Material ostane v komori, dokler ne doseže zahtevanih dimenzij, kar zagotavlja homogen izhod. • Industrijske komponente: Motorji Siemens/WEG, ležaji SKF/FAG in električni sistemi Schneider ali ABB zagotavljajo vzdržljivost in dolge servisne intervale. Popolnoma CE certificirano za mednarodno skladnost. PODROČJA UPORABE • Recikliranje kablov: Bakreni in aluminijasti kabli, kabelski snopi. • Plastični materiali: HDPE, PET, folija, grude, odpadki pri brizganju. • Elektronski odpadki (OEEO): Tiskana vezja (PCB), elektronske komponente, mešani e-odpadki. • Tekstil in pnevmatike: Industrijski tekstilni odpadki, ostanki blaga, pnevmatike za osebna in lahka tovorna vozila (predhodno razrezane). • Kovine: Aluminijasti odpadki, radiatorji, frakcije lahkih kovin. RAZPON MODELOV IN TEHNIČNI POUDARKI (Prosimo, zahtevajte natančno konfiguracijo in velikost sita glede na vaš material) • SSH S1: Kompaktna rešitev za srednje velike operacije. • SSH M1: Uravnotežena zmogljivost za različne potrebe po recikliranju. • SSH L1: Industrijski model visoke zmogljivosti za neprekinjeno delovanje. • SSH XL1: Konfiguracija za težke obremenitve za najzahtevnejše zahteve glede prepustnosti. Zakaj Mizar SSH? • Natančen nadzor izhodne velikosti z zamenljivimi siti • Stabilen in inteligenten hidravlični sistem hranjenja • Zmanjšan čas izpadov s funkcijo samodejnega vzvratnega teka • Zasnova, ki zahteva malo vzdrževanja, z dostopno rotorsko komoro • Brezhibna integracija v celotne linije za recikliranje Potrebujete prilagojeno rešitev za drobljenje? Kontaktirajte nas za ponudbo po meri, tehnične risbe ali pošljite svoj material na preizkus zmogljivosti. Mizar Recycling Machinery Kodpfxog Dcq Ts Al Nslr

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.860 mm, skupna širina: 1.200 mm, skupna višina: 3.000 mm, skupna masa: 5.500 kg, trajanje garancije: 12 meseci, širina rezila: 75 mm, moč: 60 kW (81,58 KM), dolžina rotorja: 770 mm, Serija MIZAR DSH - Dvoosni drobilnik za kovine, e-odpadke in plastiko Visok navor za zahtevne industrijske aplikacije Serija MIZAR DSH, zasnovana za neprekinjeno delovanje, zagotavlja zmogljivo, nizkohitrostno drobljenje z visokim navorom za najtrše materiale. Zasnovano za zanesljivost, zgrajeno za industrijski obseg. Glavne prednosti • Pogonski sistem: Neodvisni dvojni gredi, ki jih poganjajo robustni planetarni reduktorji. Visok navor pri nizkih vrtljajih zagotavlja učinkovito zmanjšanje velikosti z minimalno obrabo. • Industrijske komponente: Motorji Siemens/WEG, ležaji SKF/FAG, električni sistemi Schneider ali ABB. Globalno zaupanja vredne blagovne znamke za dolgoročno zanesljivost. • Tehnologija rezil: Po meri zasnovana rezila iz visoko legiranega jekla, odpornega proti obrabi. Optimizirana geometrija rezanja za agresiven zajem in dosledno velikost izhoda. • Strukturna trdnost: Ojačana jeklena konstrukcija okvirja za odpornost proti vibracijam in podaljšano življenjsko dobo. Popolnoma CE certificirano za mednarodno skladnost. PODROČJA UPORABE • Kovinski odpadki: Aluminijasti profili, radiatorji, lahki odpadki, pločevina. • E-odpadki: Tiskana vezja (PCB), matične plošče, trdi diski, mešani materiali OEEO. • Recikliranje kablov: Bakreni in aluminijasti kabli, kabelski snopi. • Plastični odpadki: HDPE cevi, industrijski sodi, PET, big bag vreče. • Les in alternativna goriva: Palete, odpadki MDF, predhodno drobljenje za proizvodne linije RDF in SRF. RAZPON MODELOV IN TEHNIČNI POUDARKI (Prosimo, zahtevajte natančno konfiguracijo glede na vaš material) • DSH S1: Kompakten tloris. Idealno za operacije srednje zmogljivosti. • DSH M1: Visoko zmogljiva vsestranska rešitev za različne tokove materialov. • DSH L1: Težki industrijski stroj za velike obrate za recikliranje. Zakaj Mizar DSH? • Visok navor brez visoke porabe energije • Modularna zasnova za brezhibno integracijo v celotne linije za recikliranje • Enostaven dostop za vzdrževanje in sistem hitre menjave rezil • Zgrajeno za 24/7 industrijska okolja Potrebujete prilagojeno rešitev za drobljenje? Kontaktirajte nas za ponudbo po meri, tehnične risbe ali pošljite svoj material na preizkus zmogljivosti. Ksdpfegwhb Ijx Al Nslr Mizar Recycling Machinery

Stanje: rabljeno, prevoženi kilometri: 85.761 km, moč: 118 kW (160,44 KM), prva registracija: 04/2013, skupna masa: 10.600 kg, vrsta goriva: dizel, konfiguracija osi: 4x4, največja dovoljena obremenitev: 4.360 kg, lastna masa: 6.240 kg, medosna razdalja: 2.700 mm, zavore: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, število sedežev: 2, Oprema: ABS, dodatne luči, filter saj, hidravlika, kabina, klimatska naprava, pogon na vsa štiri kolesa, servovolan, zapora diferenciala, * German vehicle * 1st owner * Condition as per photos * Only 11,619 operating hours * Four-wheel steering * Hydrostatic drive * High-pressure cleaner with hose and lance mounted at the rear * Pump pressure max. 200 bar * Koanda suction system 800 mm * Municipal working platform * Maximum adjustable sweeping width 3,000 mm * Side brush 500 mm * 2 central brushes * Reinforced power steering * Joystick control * Air-suspended comfort seat * Rear-view camera * ABS * Radio CD * Rotating beacons * Work lights * Air conditioning * Stainless steel debris container 4 m³ * Iveco industrial engine * Water tank 810 litres * Diesel tank volume 120 litres * Gross vehicle weight 10,600 kg Ksdovhqgrepfx Al Njlr * Unladen weight 6,240 kg * Payload 4,360 kg If a new general inspection (TÜV) is required, we will be pleased to provide you with a quote from our partner workshops. Our offer generally comes WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the equipment in order to avoid any misconceptions about its condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is given without guarantee. We accept no liability for errors or incorrect details in the offer. The buyer is obliged to verify the condition and specifications of the equipment/vehicles independently. Subject to change, prior sale, and errors.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Suszarka-odśrodkowa do tworzyw sztucznych ERFOR® CR8 Urządzenie komponentowe do linii myjących do recyklingu ♻️ ♻️ ♻️ Maszyna przeznaczona jest do suszenia tworzyw sztucznych: miękkich i twardych, w tym między innymi folii takich jak: LLDPE, LDPE, HDPE, PP, PVC, PS, PA, folii poużytkowych z rolnictwa, agrowłókniny, rozdrobnionych big bagów, worków PP, sieci rybackich, opakowań torfowych i wielu innych. Kjdpfx Alouql Rto Nelr Wirówki suszące Model - CR8 55/75 Moc silnika [kW] – 55/75 kW Wydajność suszenia folii [kg/h] – 1500/2000 Wymiary (D*S*W) (mm): 1970*2800*2060 / 2100*3150*1900 Wydajność suszenia mielonek [kg/h] – 5000 W naszej ofercie znajdą Państwo również: Kompletne systemy do recyklingu tworzyw sztucznych Linie myjące DWFS® Linie granulacji i ekstruzji Więcej informacji na naszej stronie internetowej.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Ślimakowa prasa kompaktująca SR 8 firmy Koltex to zaawansowane rozwiązanie przeznaczone do suszenia płatków folii oraz przygotowania ich do procesu ekstruzji. Ta innowacyjna maszyna skutecznie obniża wilgotność materiału do około 5%, co znacząco wpływa na jakość finalnego produktu z recyklingu. Konstrukcja modułowa Urządzenie może być dostosowane do indywidualnych potrzeb i wymagań klienta, dzięki czemu optymalnie sprawdza się w szerokim zakresie zastosowań. Niezawodność Zastosowanie renomowanych elementów napędu o wysokiej sprawności zmniejsza koszty eksploatacji oraz wydłuża okresy pomiędzy przeglądami. Inteligentna obsługa maszyny Kljdpjuqwzwjfx Al Nsr Panel dotykowy z intuicyjnym interfejsem zapewnia łatwe sterowanie i monitoring procesu pracy. Oszczędność miejsca Kompaktowa budowa prasy pozwala zaoszczędzić cenną przestrzeń w miejscu pracy. Wydajność (folia LDPE): 1500 KG/H Średnica ślimaka: 500 mm Moc silnika: 45 kW Moc zgarniania: 7,5 kW Wielkość wsadu: 760x650 mm Wymiary całkowite: 6097x1833x2729 mm Masa: 6800 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 25 h, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Crusher equipment Including: Special tool, reinforced, 7/7 tool holders each with 4 tools (tools consisting of main blade, pre-crushing blade, and post-crushing blade) Shaft speed individually and steplessly adjustable, approx. 0–41 rpm Including post-crushing beam Including tilting skip Drive unit Drive power 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swing-type radiator Electrics / Controls Including IFM display Including radio remote control Klodpfx Aeu Hgllel Nor Including 4 shredding programs (wood, waste, special, and green waste) Discharge conveyor Including discharge conveyor Custom equipment Including pre-armoring of the tools Including overband magnet, hydraulically height-adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional soundproofing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Stanje: novo, Leto izdelave: 2025, skupna masa: 6.500 kg, moč: 75 kW (101,97 KM), premer gredi: 1.200 mm, trajanje garancije: 12 meseci, The ERP Series – Eco Recycling Plant is Mizar’s latest innovation in cable recycling, designed to deliver maximum performance with minimal energy consumption. This compact and powerful system is based on two main components: the FGR – Fine Granulator and the DES – Densimetric Separator. Together, they provide an advanced, environmentally friendly solution for high-purity separation of metals and plastics. Kjdpfexb A S Njx Al Njlr The ERP Series stands out for its low energy consumption, optimized material flow, and precise separation technology – all integrated in a space-saving design. Whether as a standalone solution or as part of a larger line, ERP offers efficiency without compromising on quality. Operators benefit from an intelligent, PLC-controlled touchscreen interface that enables easy operation and real-time monitoring. All components are CE-certified and manufactured from high-quality materials for long service life. The ERP Series is available in three sizes to suit different requirements: ERP S1, ERP M1, ERP L1. With the ERP Series, you achieve maximum recovery rates, highest material purity, and energy-efficient operation – all in one environmentally conscious system.

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), Faceplate 5256 Diameter: 500 mm Kljded Tyxgspfx Al Nor Height: 100 mm

Stanje: dober (rabljeno), Face plate Diameter: 500 mm Inner diameter: 105 mm Kedpjc U E Rzefx Al Nslr Height: 75 mm Cylindrical mounting: 105 mm Pitch: 5 mm 475 rpm.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 1.410 kg, vhodna frekvenca: 50 Hz, nazivna (navidezna) moč: 500 kVA, vrsta izhodnega toka: trifazni, Oprema: Na voljo je tipska ploščica, 6 months warranty Klodpownfx Usfx Al Nsr

Leto izdelave: 2024, stanje: novo, Air Separators ZIGZAG Application Description: Kjdpeua D Alofx Al Njlr The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Wirbelstromabscheider der Magnetic-Serie werden hauptsächlich in der Abfallrecyclingindustrie eingesetzt. Der Einsatz von Wirbelströmen ermöglicht die Rückgewinnung von Nichteisenmetallen (nicht magnetisch) aus losem Abfall, wie Aluminium, Kupfer, Messing usw. Die WPS-Abscheider zeichnen sich durch eine hohe Abscheidegenauigkeit aus, dank der eigenen Lösungen von ZŁOMIARZE, was eine hohe Rentabilität des Abfallrecyclings garantiert. WPS-Abscheider werden eingesetzt zur Rückgewinnung von: - Nichteisenmetallen aus dem Recycling von Elektronikschrott - Nichteisenmetallen aus dem Kfz-Recycling - Metallen aus Gießereiabfällen - Aluminium in Glasrecyclingprozessen - Nichteisenmetallen aus Stahlabfällen - Nichteisenmetallen aus Siedlungsabfällen Funktionsbeschreibung: Das vom Schwingförderer zugeführte Material gelangt auf das Förderband des Wirbelstromabscheiders. Das Förderband befördert das Material zum Hochgeschwindigkeits-Magnetrotor. Der Magnetrotor erzeugt ein hochfrequentes Magnetfeld durch ein optimiertes System alternierender Magnetfelder. Das variable Magnetfeld induziert Wirbelströme in Metallen. Diese erzeugen entgegengesetzte Magnetfelder und führen dazu, dass Buntmetalle aus dem Materialstrom herausgeschleudert werden. Ein am Ende des Abscheiders montierter Trenner sorgt für die Fraktionierung des Materials. Der zentrale Magnetrotor wurde so konstruiert, dass er auch kleinste Materialien bewältigt und ermöglicht die Rückgewinnung von Partikeln bis zu einer Größe von 1 mm. Kedpfx Aou Dg Uhjl Nolr Wir bieten auch größere Ausführungen von Wirbelstromabscheidern an – Katalog in den Dokumenten.

Stanje: novo, Leto izdelave: 2024, ZŁOMIARZE Recycling Technology MCW 52/76 Shredder The MCW series multi-shaft shredder is built on years of experience in the plastics and scrap recycling industry. MCW is a highly reliable, universal pre-shredder designed for processing various types and formats of materials, including plastics, rubber, cables, metals, electronic scrap, and production waste. Shredders are available in two sizes: MCW-52 Technical specifications: • Installed power – 22 kW • Cutting chamber – 510 x 760 mm Klodpohix Hrsfx Al Njr • Throughput – approx. 400 kg/h (depending on material) • Weight – approx. 1400 kg MCW-76 Technical specifications: • Installed power – 37 kW • Cutting chamber – 965 x 780 mm • Throughput – approx. 800 kg/h (depending on material) • Weight – approx. 2200 kg For our shredders, we offer additional equipment to facilitate the waste shredding process: • Infeed conveyor • Dedusting system • Discharge conveyor • Separators and magnetic plates Please contact us for more information.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Klodpfxevf E Ave Al Nor Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: novo, Leto izdelave: 2025, Rezalniki za reciklažo kablov iz serije Mizar Compact so zasnovani za učinkovito recikliranje kablov različnih premerov in materialov. S postopkom drobljenja kablov ločujejo kovinske in plastične komponente ter zagotavljajo največji izkoristek materiala. ✅ Učinkovita reciklaža kablov in radiatorjev – Učinkovito loči kovine in plastiko. ✅ Turbo mlin tehnologija (CMT modeli) – Omogoča višjo čistost z popolnim ločevanjem finih bakrenih žic. ✅ Kompaktna zasnova – Idealna za obrate z omejenim prostorom. ✅ Energetska učinkovitost & stroškovna ekonomičnost – Zmanjšuje obratovalne stroške. 🔸 Reciklirani materiali: ✔ Kabel ✔ Radiator 🔸 Tehnične specifikacije 🔹 CMT Moč: 20 kW Motor granulatorja: 11 kW Rezila granulatorja: 3+2 Dolžina: 1300 mm Širina: 1500 mm Kledpfx Aev Hbdrsl Nsr Višina: 2140 mm Teža: 1380 kg

Stanje: novo, Leto izdelave: 2025, skupna širina: 780 mm, skupna dolžina: 1.240 mm, skupna višina: 1.330 mm, skupna masa: 480 kg, Stroj za odstranjevanje kablov CBR A3 je posebej zasnovan za odstranjevanje zunanjega izolacijskega materiala s kablov vseh velikosti, kar olajša odstranjevanje prevodnega materiala v notranjosti. Ta serija ponuja vrhunsko zmogljivost na; kable z jeklenim oklepom (SWA), kabli z dvojno jekleno prevleko, jeklene trakove, kabli, prevlečeni s PVC, kable, prevlečene s svincem, debeli kabli, prevlečeni z gumo, kabli, prevlečeni z najlonom, nizkokakovostni kabli, TT kabli in drugi. Posebej obdelana rezila z edinstveno zasnovo omogočajo dolgotrajno rezanje in odstranjevanje kablov poljubne dolžine, ne da bi se rezila obrabila. Vse električne in elektronske komponente v seriji CBR A3 so znamke Siemens. Naši izdelki so izdelani in certificirani v skladu s standardi CE in EAC. Tehnične specifikacije Kodpoff H Imjfx Al Nolr MOČ 5,5 KW dimenzije kabla 1-120 mm Hitrost rezanja 25 m/min DOLŽINA 1240 mm ŠIRINA 780 mm Višina 1330 mm TEŽA 480 kg

Stanje: zelo dobro (rabljeno), Maximum log length: 5000 mm Maximum cutting width: 700 mm Maximum cutting height: 630 mm Klodpfxswx Tb So Al Ner Wheel diameter: 450 mm Comprehensive hydraulic equipment Main motor: 11 kW

Stanje: novo, Leto izdelave: 2025, Fully automatic liquid filling system with 4 filling heads, suitable for various filling ranges (e.g. 50ml to 500ml) – can be customised to customer requirements. Within the filling range, the filling volume can be precisely adjusted by changing the air cylinder stroke – easily managed via software, with no need for additional modules. Operating principle: Bottles are fed in via conveyor belt, automatically positioned, filling needles are inserted into the bottles, and filling takes place via filling lances. The dosing is controlled by air cylinders. The filling lances feature a special stop mechanism to prevent dripping. Key electronic components: Siemens PLC and touchscreen, Sick sensors, Panasonic frequency inverter. Pneumatic components mainly from AIRTAC. CIP self-cleaning hardware and software are included and customised to client requirements. - Specifications: Number of filling heads: 4; Maximum machine cycle rate (idle): 26 cycles/min; Accuracy depends on selected filling range and actual filling volume; Stainless steel version SS304 – all product-contact parts in SS316; Power supply: 220V / 0.5kW; Air pressure: 4-6bar, 0.4m³; Machine dimensions (LxWxH): 2500x1070x1800mm; Weight: 850kg. Optional dosing via servo motors instead of air cylinders is available at an extra charge. Servo version dimensions (LxWxH): 2500x1300x1900mm. Ksdpfxov Nk Rmo Al Njlr The machine/system is also available in additional versions for various packaging sizes and speeds. Please note that our new prices are often lower than typical used market prices. You are welcome to enquire directly and let us know your packaging requirements. Usually, we have 30–50 different new machines in stock for immediate delivery. For customised machines, we offer very short lead times starting from approximately 3 weeks. All machines are sold with full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic liquid filling system with 6 filling heads, suitable for various filling ranges—for example, from 50ml to 500ml—customizable according to customer requirements. The filling volume within the specified range can be individually adjusted by modifying the displacement of the pneumatic cylinders—easily managed via software control without the need for additional modules. Operation: Bottles are fed via a conveyor belt, then positioned. The filling needles are inserted into the bottles; filling is performed by filling lances with dosing controlled by pneumatic cylinders. The filling lances feature a special stop mechanism to prevent liquid dripping. Relevant electronic components: PLC and touchscreen from SIEMENS, detection sensors from Sick, frequency converter from Panasonic. Pneumatic components predominantly from AIRTAC. CIP self-cleaning hardware and software are included and can be customized as per requirements. - Specifications: Number of filling heads: 6; maximum machine cycle rate (idle): 35 cycles/min; accuracy: depends on selected filling range and actual filling volume; stainless steel version SS304, all product-contact parts made of SS316; power: 220V, 0.5kW; air pressure: 4-6 bar, 0.4m³; machine dimensions (LxWxH): 3500x1350x1800mm; weight: 850kg. Optional: Servo motor dosing instead of pneumatic cylinders available at extra cost. Servo version machine dimensions (LxWxH): 3500x1350x1900mm. This machine/system is also available in other versions for different packaging sizes and speeds. Kedpfov Nk Rtsx Al Nelr Please note that our new prices are often below typical used equipment prices. Feel free to contact us with your specific packaging requirements. We usually have 30-50 different new machines in stock and immediately available. For customized machines, we offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty.

Stanje: novo, TECHNICAL DATA: - Footprint: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6, raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The mezzanine floors can be extended in the standard grid as specified. Other sizes and heights are available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Tie rods - Floor covering - Fastening material PRICES: Variant I: Footprint: 30 m² | Size: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT Variant II: Footprint: 60 m² | Size: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT Variant III: Footprint: 90 m² | Size: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT Variant IV: Footprint: 120 m² | Size: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT Variant V: Footprint: 60 m² | Size: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT Variant VI: Footprint: 180 m² | Size: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT Variant VII: Footprint: 240 m² | Size: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT Further variants available Optional accessories: - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection Kljdpfx Aljxpizte Nsr YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system represents an example from our standard range. Of course, we design and manufacture your warehouse platform precisely according to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. Our planning department will prepare an individual, non-binding quotation based on your specifications. Whether new build, expansion, or modernization of existing systems – we support you with sound expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or dispatch is possible for an additional charge. The extra costs depend on the delivery location and the size of the shipment and can be inquired with us individually. TERMS OF PAYMENT Payment terms must be agreed upon in case of order. The price refers to unit price/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Stanje: dober (rabljeno), TECHNICAL DATA - Main beam: IPE 600 mm (various sizes & load capacities available) - Secondary beam: Sigma 410 mm (also available in 220 & 260 mm) - Decking: chipboard P6, double-sided coated, 38 mm - Load capacity: 500 - 1,000 kg / m² - Colour: RAL 9010 Pure White - Condition: used Large quantities available directly from our Nordhorn warehouse. The IPE 600 allows for large span widths! Delivery scope: - Columns - Main and secondary beams - Cross bracing - Floor decking PRICING: from €40.00 net per m² Prices may vary depending on the specification (load capacity and column spacing). Please contact our team. We are happy to advise you. Kledpfxogpxf Hs Al Nor Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is available for an extra charge. Additional costs depend on the delivery location and the scope of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is a unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveying technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favourable conditions. Please feel free to contact us if you have any questions. Four wins – The success components of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The VM400 HD Former is a highly efficient solution designed to automate the shaping of food products with outstanding consistency. It integrates seamlessly into high-capacity production lines, particularly within the meat, plant-based alternatives, or coated foods industries. Thanks to its advanced technology, it ensures uniform moulding even with compact or challenging textures. Its conveyor system and precision mould enable the creation of uniform portions, consistently meeting weight and shape specifications. As a result, it guarantees excellent product presentation, enhancing both batch consistency and end-customer satisfaction. Furthermore, the VM400 HD offers exceptional flexibility: it can handle various formats by simply changing the tooling. In addition, its intuitive control panel allows for rapid adjustment of throughput and pressure without downtime. The entire unit is manufactured from stainless steel, ensuring maximum durability and fast cleaning in line with the strict hygiene standards of the industry. Choosing this machine means opting for immediate productivity gains and robust production consistency, even during peak demand. Technical specifications: Klsdjwxaabspfx Al Nor Output: up to 2,000 cycles/hour depending on product Portion weight: adjustable from 30 to 250 g Dimensions: 1,300 x 850 x 1,600 mm (L x W x H) Power supply: 400 V – 50 Hz – 3 phase Materials: AISI 304 stainless steel frame with sanitary finishes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 2.125 h, Funkcionalnost: popolnoma funkcionalen, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Model: Matrix 400 Complete Cable Granulation Line Condition: Very Good – Fully Operational Availability: Immediate Technical Description: Granulation line for cables including: • Completely refurbished pre-shredder recently o All rotor bearings replaced with new o Gearbox bearings replaced with new • Conveyor with magnetic rollers for scrap metal separation • Dosing hopper • Feed conveyor • Blade mill with 3 / 4 / 5 mm calibration screens • Cyclone and zig-zag separation • Finishing turbo • Densimetric table • Dust extraction with bag filter Spare Parts Included: • Pre-shredder: 1 set of knives + counter-knives • Blade mill: 3 sets of knives and counter-knives Kledpfx Aex It N Uel Nsr Capacity: Approx. 200 kg/h of finished product Application: Processing and recycling copper cables Price: €120,000 (Complete treatment line) Additional Information: • Installation can be seen in operation • Photos and further details available upon request 📩 Contact us for more information

Stanje: rabljeno, Dieses Angebot bezieht sich auf das Life Technologies Invitrogen PowerEase 500 Elektrophorese-Netzgerät. Das Gerät befindet sich in einwandfreiem, voll funktionsfähigem Zustand und ist sofort einsatzbereit. Der Invitrogen PowerEase 500 ist ein leistungsstarkes, programmierbares Elektrophorese-Netzgerät, das speziell für den Einsatz mit Mini-Gel-Elektrophorese-Systemen konzipiert wurde. Es bietet umfangreiche Funktionen für Präzision, Komfort und Sicherheit bei Protein- und Nukleinsäure-Gel-Elektrophorese-Anwendungen. Außenmaße (B × T × H): 16,5 × 27 × 20 cm Gewicht: 2,9 kg Ausstattung & Funktionen Für Mini-Gele konzipiert: Optimiert für den Einsatz mit Mini-Gel-Elektrophorese-Systemen. LCD-Display: 240 × 128 Pixel Interface zur Anzeige von aktuellen Laufdaten. Parallelport-Anschluss: Kann an die meisten Drucker mit Parallelport zur Ausgabe detaillierter Laufprotokolle angeschlossen werden. Laufdatenprotokollierung: Zeigt während des Betriebs die Gelanzahl, Stromstärke, Spannung, Leistung und Temperatur an. Vorgegebene Modi: 8 vordefinierte Methoden speziell für Novex™-Gele 4 benutzerdefinierte Methoden Mehrfach-Gel-Unterstützung: Bis zu 10 Tris-Glycin-Gele (5 Mini-Zellen) Bis zu 2 NuPAGE™-Gele (1 Mini-Zelle) Bis zu 6 NuPAGE™ Tris-Acetat-Gele (3 Mini-Zellen) Betriebsmodi: Konstantspannung, Konstantstrom, Konstantleistung Sicherheitsfunktionen: Offen-/Kurzschluss-, Übertemperatur-, Überspannungs- und Überstromschutz Kodoxv A N Ropfx Al Nolr Programmierbarkeit: Speicherung von bis zu 16 benutzerdefinierten Programmen Lineare Spannungsrampe: Sofortige Spannungserhöhung möglich Optionale Temperatursonde: Unterstützt Temperaturabschaltung über Sonde Tipps zu Anwendung & Wartung: Kühlraumeinsatz: Das LCD kann bei niedrigen Temperaturen verblassen, zeigt jedoch wieder normal an, wenn es erwärmt wird. Regelmäßige Reinigung: Um Salzablagerungen zu vermeiden, gelegentlich reinigen. Sicherheit: Führen Sie kein An- oder Abklemmen von Leitungen durch, während die Hochspannungsanzeige aktiv ist.