Homag 2-025-15-2020 nakup rabljenega (85.328)

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: 10857, Total pressing force: 315 t Stroke: 1100 mm Bledpfx Asvmfzbocmeh Installation height: 2200 mm Table clamping surface approx.: 2500 x 1000 mm Ram clamping surface approx.: 2500 x 1000 mm Maximum tool weight on ram: 6000 kg Rapid traverse down: 600 mm/s Working speed: 32 - 230 mm/s Rapid traverse up: 600 mm/s Power requirement: 158 kW Machine weight approx.: 44 t Height above floor level approx.: 6175 mm Automation

Stanje: dober (rabljeno), Leto izdelave: 2015, številka stroja/vozila: 0-200-24-0779, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 55 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, skupna dolžina: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left. Year of manufacture 2015. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit, - Maximum workpiece thickness 60 mm - Motorized height adjustment of upper pressure unit - Workpiece support with roller rails - Glue pot lift for feed stop - Glue roller clamping in front of trailing edge of the workpiece - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with 2x4kW (clockwise/counterclockwise), operation-controlled Horizontal positioning via NC motor (CAN bus) GLUING SECTION A20, comprising: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA glue - Suitable for both EVA and PUR adhesives - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness Bljdey A I Sgspfx Acmeh - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered, 4 non-powered pressure rollers POST-PROCESSING SECTION: - PK25 end trimming unit, horizontal, 2 motors at 0.8 kW each (front/rear edge), for chamfering/straight cuts and excess trimming - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 corner rounding unit, 2 motors (top/bottom) with motorized fine adjustment, controlled from operating panel, equipped with various interchangeable heads with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraper, top/bottom - Flat scraper, top/bottom - Buffing unit, top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.383 h, HOMAG DRILLTEQ V-200 je kompaktni in visoko učinkoviti navpični CNC obdelovalni center, zasnovan za natančne vrtalne, utorne in rezkalne operacije pri izdelavi pohištva in omar. Zaradi vertikalne obdelave zasede stroj minimalno talno površino, hkrati pa ponuja veliko prilagodljivost in produktivnost. Idealno je primeren tako za serijsko kot tudi za individualno proizvodnjo. Bjdpfx Aoym Ny Sjcmolh Stroj je v zelo dobrem tehničnem stanju in ga je mogoče preizkusiti pod napetostjo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Immediately available! Function Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaning agent (wash liquor). Contaminated items to be cleaned are placed into the rotating wash basket and the lid is closed. After setting the desired wash temperature and time, the unit is switched on and the wash liquor in the tank is heated. Inside the closed machine, the basket rotates at a constant speed on its axis. The pump units extract the wash liquor from the tank and distribute it through 6 stainless steel spray pipes equipped with overlapping flat fan nozzles. The items to be cleaned are intensively sprayed from all sides with the hot cleaning solution due to the even rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally arranged pumps - 6 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, belt drive via separate motor - Steam extraction - Stainless steel perforated plate with filter basket above the wash tank - Suction filter in front of pump chamber - Water shortage protection - Individually height-adjustable leveling feet Technical Data - Tank / Basket Capacity: 280 l - Tank / Basket Diameter: 1150 mm - Load Capacity: 350 kg / optionally 500 kg Bedpjx Izwmsfx Acmslh - Temperature Range: min. - max. 0–60 °C - Working Height: 700 mm - Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm - Weight: 250 kg - Heating Power: 10 kW - Spray Quantity: 2 x 10,800 l/h - Pump Pressure: 2.3 bar - Material: Stainless Steel - Electrical Connection: 13.5 kW / 400 V / 50 Hz / 32 A

Stanje: rabljeno, številka stroja/vozila: 007134, Vrsta pritrjenega roba: tanek rob, močan rob, masivni les Lepljenje: EVA, vroči zrak Spojno rezkanje: da Večnamenska enota: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kos Blsdpfot Hmtzjx Acmoh

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Bledpfx Acjinigmsmsh Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDER (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control / Software: PC 22 Feed speed (variable) m/min 18 - 32 Panel infeed system WZ 14/30 Joint trimming unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + pre-melter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (No. 12 positions) End trimming unit WK13 (CHAMFER / STRAIGHT Automatic adjustment) Pre-milling unit (2 x 0.55 kW) Pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copying milling unit (profile copying) FF 32 (4 x 0.4 kW) Automatic changeover device Contour milling unit (fine milling) CNC-controlled FK 31 (30 m/min), recently added after technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scrapers + smoothing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Stanje: rabljeno, številka stroja/vozila: 008495, Delovno območje os X: 3050 mm Delovno območje os Y: 1400 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 11 kW Število kontroliranih osi: 4 osi Največja višina roba: 45 mm Bljdpfjy Edqqsx Acmjh Število vrtalnih vreten: 21 Število mest za orodja: 12

Stanje: rabljeno, Leto izdelave: 2021, vhodna napetost: 400 V, vhodni tok: 17 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Ponujamo to rabljeno robno lepilko HOMAG EDGETEQ S-240, leto izdelave 2021. Priložen je dvovrečni odsesovalec ostružkov KOGI 2,2 kW / 1650 Pa. Stroj ima dodaten rezervoar za lepilo. V priloženem PDF-ju je cenitveno poročilo. Tip: EDGETEQ S-240 PROFI KDF 230 Številka stroja: 0-261-73-7111 Leto izdelave: 2021 Shema ožičenja: 0-261-73-7111 Napetost napajanja: 400Y/230 V Blodpfxjy Exwfo Acmjh Število faz: 3 Frekvenca: 50 Hz Maksimalni tok pri polni obremenitvi: 17,3 A Varnilka: 20 A Kratkostični tok: 5 kA Krmilna napetost: 24 V Zaščita ohišja: NEMA 1 Največji motor: 4,6 A Največji tok grelca: 2,3 A Za dodatna vprašanja ali informacije nas kontaktirajte po sporočilu ali telefonu.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna višina: 2.200 mm, skupna dolžina: 7.500 mm, skupna širina: 1.500 mm, skupna masa: 4.000 kg, TEHNIČNI PODATKI Skupna višina: 2.200 mm Skupna dolžina: 7.500 mm Skupna širina: 1.500 mm PODROBNOSTI STROJA Teža: 4.000 kg Leto izdelave: 2007 Napetost: 400 V Poraba toka: 46 A Varovalka: 63 A Transportne dimenzije: 7.500 mm x 1.500 mm x 2.200 mm (d x š x v) Transportna teža: 4.000 kg OPREMA Blsdpfx Acoy Akytjmoh Orodja na voljo: Da (za 1., 3., 4., 5., 7., 8. enoto) Orodja na voljo: Ne (za 6. enoto)

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Prodajam avtomatski magazin HOMAG BARGSTEDT Profi TLF210/21/10, letnik 2014. Skladiščenje: 22 pozicij za material velikosti 2,80 x 2,10 m. Skupne dimenzije: 20 x 10 m x višina 3,5 m. Sistem za zlaganje/odlaganje: 2 poziciji. Bledpfx Acjyzcc Remeh Nosilna glava z vakuumskim prisesalnim sistemom. Vakuumski sistem (s črpalko). Avtomatsko nalaganje. Popolna varnostna ograja! Na voljo takoj. Pripravljeno za uporabo, možnost preizkusa. S CE certifikatom in popolno dokumentacijo.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Homag Profi Line CHF 51/32/32 Panelna žaga - Leto izdelave: 2002 - Širina reza: 3200 x 3200 mm - 3 mize z zračnim zavesam - Izhod žage: 102 mm - Višina reza: 85 mm Bodpox Ey Nvefx Acmjlh - Glavni list: 400 mm - Glavni motor: 11,2 kW (15 KM) - Predrezilo z neodvisnim motorjem

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 40 mm, dolžina obdelovanca (maks.): 2.500 mm, največja debelina roba: 3 mm, teža obdelovanca (maks.): 50 kg, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (coil stock) - material thickness: 0.4 - 3 mm Maximum edge cross-section (plastic): 135 mm Maximum edge cross-section (veneer): 100 mm Maximum coil diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edge up to 3 mm Cross-processing speed: up to 30 m/min for panel sizing Cross-processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW Bjdpfx Aox Ezz Hocmelh EQUIPMENT Top/bottom separation agent spraying unit A3 gluing station with 2 rollers FF12 profile milling unit top/bottom, motors 12,000 rpm FA11 finishing unit top/bottom Continuously adjustable stop cams with max. cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, COMPLET FACTORY FOR MOBILE FOR SALE 1 PCS AUTOMATIC ANGULAR SIZING SAW Producer: HOLZMA – Germany Type: HCL 11/56/22 Ser. Nr.: 0-241-17-0009 Year: 2001 1 PCS AUTOMATIC SIZING, EDGEBANDING, BORING LINE INCLUDE: - BRIDGE VACUUM LOADER - SIZING EDGEBANDING MACHINE Producer: HOMAG – Germany Type: OPTIMAT KFL 525/6/A3/15 Ser. Nr.: 0-202-10-1687 Year: 2007 - ROLLER CONVEYOR 90 DEGREES Producer: HOMAG – Germany Type: PROFI TB 10/25/12 Ser. Nr.: 0-205-10-5100 Year: 2007 Bjdpfx Acjxwt Igsmjlh - SIZING EDGEBANDING MACHINE Producer: HOMAG – Germany Type: OPTIMAT KFL 526/8/A3/15 Ser. Nr.: 0-202-10-1689 Year: 2007 - ROLLER CONVEYOR Producer: HOMAG – Germany Type: OPTIMAT TDL 310/25/12 Ser. Nr.: 0-205-10-1688 Year: 2007 - BOORING MACHINE Producer: WEEKE – Germany Type: OPTIMAT BST 500 D Ser. Nr.: 0-251-04-2754 Year: 2007 - BOORING MACHINE Producer: WEEKE – Germany Type: OPTIMAT BST 500 D Ser. Nr.: 0-251-04-2755 Year: 2007 - BRIDGE VACUUM UNLOADER

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Bledpfxeytr Hbe Acmoh Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Bljdpfxoyttf Sj Acmjh Number of suction traverse beams: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW CNC controller model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Spindles Number of Spindles for Vertical Drilling: 20 Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Blsdpfjyttcwsx Acmsh Saw Unit Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Stanje: rabljeno, Leto izdelave: 2005, Enostranski robni lepilni stroj, namenjen natančnemu in stabilnemu lepljenju masivnih in ploščnih materialov (iverne plošče, MDF, laminat). Stroj je oblikovan kot kompaktna, a popolnoma opremljena rešitev za malo- in srednjeserijsko proizvodnjo s poudarkom na kakovosti obdelave robov. Masivni litoželezni okvir zagotavlja visoko togost stroja in dolgoročno geometrijsko stabilnost. Stroj je opremljen s klasičnim neprekinjenim transporterjem s pritisnim trakom in popolnim naborom obdelovalnih agregatov za končno obdelavo roba v enem prehodu. Tehnična sestava stroja: Predrezkalna enota Ogrevanje materiala Samodejni dozirnik EVA lepila Bedpfxeyfw Syj Acmslh Nanašalni valj EVA Odrezovalne žage (sprednja in zadnja) Groba rezkalna enota Zaokroževalna enota Radijska strgala Strgalo za lepilo Rezkalni agregat za utore Krtačna enota Povratni transporter

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 197 kW (267,85 KM), vrsta goriva: električni, barva: drugo, Leto izdelave: 2026, *Vsi naši izdelki so izdelani skrbno in so pokriti z enoletno garancijo! *Vgradnja in usposabljanje operaterjev BREZPLAČNO FABO MCC-200 je majhen in učinkovit model iz serije CC – mobilna zaprto-krožna naprava za drobljenje in sejanje, namenjena obdelavi trdih materialov kot so bazalt, granit, gabro, dolomit in druge vrste trdih kamnin. TEHNIČNE SPECIFIKACIJE: - Zalognik: 15 m3 - Proizvodna zmogljivost: 150–250 ton na uro - Tip drobilnika: stožčasti drobilnik - Največja vhodna velikost: 180 mm - Velikost in število etaž vibracijskega sita: 1700 × 4500 mm, 3–4 etaže - Skupna moč motorjev: 197 kW MCC-200 zajema: • Zalognik (Hopper) • Vibracijski podajalnik • Stožčasti drobilnik • Vibracijsko sito z visokim hodom • Zložljivi dovajalni, povratni, obvodni in skladiščni transportni trakovi • Hidravlične podporne noge • Mobilno podvozje z osmi in pnevmatikami • Popolnoma avtomatiziran sistem • Sistem za zatiranje prašenja Blsdoy S Akiopfx Acmeh • Pohojne platforme za enostavno vzdrževanje Dizelski agregat (opcijsko) ZA DODATNE INFORMACIJE NAS PROSIMO KONTAKTIRAJTE!!!

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0006834 - Koda proizvajalca: 4-085-08-0202 - Stanje: Rabljeno - Funkcionalnost: Ni testirano - Kompatibilni stroj: - Teža: 10 kg - Dimenzije: 70x46x34 - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. Bljdpjyrqykjfx Acmsh

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003547 - Koda proizvajalca: 3-008-23-1410 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoč - Združljiv stroj: - V primeru zanimanja ponujamo storitev pregleda, kontaktirajte nas. 4KG 46X39X27 Bodpfx Asyrn I Ejcmslh

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003546 - Koda proizvajalca: 3-812-08-5500 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Kompatibilen stroj: - Če vas zanima, nudimo storitev revizije, kontaktirajte nas. 3KG 36X26X21 Bodpfx Aeyrn Irocmelh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 0-201-22-3325, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 5.800 mm, širina obdelovanca (maks.): 1.200 mm, model krmilnika: Homatic-CNC System PC83 mit Windows NT 4.0, hitrost pomika os X: 80 m/min, največja hitrost vretena: 18.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item punctually on 20.03.2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: Saw and crosscutting unit for tool changer Drilling and milling unit (4 spindles) for tool changer Combined flush/radius milling and finishing unit for tool changer Air nozzle for workpiece edge for tool changer Attention: The scope of delivery includes only the units mentioned above. No vacuum suction cups, tools, or tool holders—possibly shown in the pictures—are included! TECHNICAL DETAILS Console clamping table "K": 12 movable consoles for holding vacuum cups with longitudinal and side stops, 4-fold occupancy Max. workpiece length with single set-up: 5,800 mm Max. workpiece length in pendulum mode: 2,200 mm Max. workpiece width: 1,200 mm Max. workpiece thickness (with standard 100mm high suction cups) with edge: 60 mm (when dust extraction hood is in position 1) Max. workpiece thickness (with standard 100mm high suction cups) without edge: 60 mm Max. workpiece thickness (with standard 100mm high suction cups) without edge: 120 mm (when dust extraction hood is in position 2) Support equipment Drilling head: 17 vertical spindles 2x main spindle 12 kW water-cooled for HSK (speed 18,000 rpm with C-axis and 12-position disk tool changer) Separate Y-axis for 2nd main spindle plus aggregate interface with integrated pneumatics and electrics Electronic supply and swivel drive C-axis: swivel range without limitation. Edge banding unit, 360°, for changeover into right main spindle Blsdpfx Ajyic Tuscmoh Max. edge height: 65 mm Pickup station right for glueing unit storage Pre-cutting station and triple roll magazine Adapter units Combined flush/radius cutting and finishing unit (profile scraper) Saw and crosscutting unit Drill-milling unit, 4-spindle (crosshead) Air nozzle for workpiece edge MACHINE DETAILS Control: HOMATIC Control PC 83 with Windows (NT 4.0) EQUIPMENT WOODWOP programming system version 5.0 Network connection Laser positioning aid Chip conveyor belt Safety: Foot mats at front, side safety guards, rear: installation against wall Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or can be used as the 1st and/or 2nd machine in a production line). Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 60 mm Working width (min/max): 240 / 2500 mm Control: PC 22 Feed speed (adjustable): 10–40 m/min Cam pitch: 500 mm EDGE PROCESSING (for each side): - Protection milling unit (pre-milling): 1 x 4.5 kW (hydro) - Chipping aggregate KD 11 (2 x 8.1 kW) hydro EDGE BANDING UNIT (for each side): - Gluing unit (hot melt + pre-melter): A3 + A34 - Edge magazine for rolls (slot no. 6) - Edge pressure zone “C” - Pre-milling unit: 2 x 0.55 kW - Milling unit MF 20 (2 x 0.55 kW) 20° - Profile scraping aggregate PN 20 - Finishing unit (flat scraper + buffing aggregate) FA 11 Free space Bedpfx Acelikydemolh

Stanje: zelo dobro (rabljeno), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Bledpfxeifnxxj Acmeh Safety and soundproof cabins PROCESSING AREA (per side): Milling unit KD 10 (2 x 6.6 kW) EDGEBANDING AREA (per side): Gluing unit (hot-melt glue + premelter) A3 + A34 (high speed package) Pressure zone Edge magazine for rolls (compartment no.) 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finish unit (scrapers + smoothing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90°

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D Blodpfx Aolikvhjcmeh X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA