Skladalni sistem / Avtomatski magazin

HOMAG BARGSTEDT Profi TLF210/21/10

Leto izdelave: 1997, stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system • Cross sanding unit • Longitudinal sanding unit - shoe type • Brushing unit • Ionisation Dusdpfx Afsidi Ivo Ser

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller track (2-lane elements): 9 units Clamps: 7 units, first 3 with 2-finger design Air cushion table width: 650 mm, 4 pcs, each 2160 mm long Central blower: 1 unit with increased blower performance – 3 inclined lift clamps (2-finger): – 1 inclined lift clamp (1-finger): – 1st air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1–150 m/min Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. clamping width 0 mm, max. clamping width up to full cutting length Dsdpoymx S Djfx Af Sjur Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17” flat display Labelling with part graphics / label program / label printer PICA 104

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Dusdpfxoxranpe Af Sjr Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on pusher with double fingers 3 front aligners 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Material support surface below pusher with brush rollers, suitable for delicate surfaces Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Rabljena žaga BIESSE Selco WN2 - OSI upravljanje - tiskalnik etiket - letnik 2017 Dedpoyrr U Nofx Af Seur - na voljo aprila - višina reza 60 mm - 1–80 m/min - hitra menjava žaginega lista - 4 mize z zračnim blazino

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions. Dujdoxy Tmnjpfx Af Sor

Stanje: rabljeno, Paint finishing line consisting of: Item 1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 2 Cefla Dust Removal Machine - Manufacturer: Sorbini Dodpfxov I Akvo Af Ssur - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller conveyor - Air blast channel, top 2 pcs. - Air blast channel, bottom 1 pc. - Deburring brush - With ionizing bar from above - With ionizing bar from below - With its own drive - With its own control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction stub diameter: 180 + 120 mm - Total connected load: 7.6 kW - Voltage, Hz: 400/50 Item 3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual gun drive - Dry extraction - Extraction stub diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 4-10 m/min - Belt cleaning system - Paint recovery via V-belt system - Spray gun control: EPS-CNC CNC 7000 - Color management system for 3+1 pumps - Number of installed airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at machine outfeed - Exhaust air recirculation system - Extraction fan exhaust air control - Suitable for water-based paints - Suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: approx. 20 - 26 kW - Voltage, Hz: 400/50 - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small quantity container - Gun carrier arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Item 4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of trays: 30 pcs. - Tray length: 5,600 mm - Usable tray length: 5,300 mm - Load capacity per tray: 300 kg - Max. part height: approx. 110 mm - Clear height between trays: 120 mm - Dimension: tray center to tray center 3,658 mm - Max. part length: approx. 5,200 mm - Number of controllable temperature zones: 2 pcs. - Supply air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Heating capacity max.: 175 kW - Max. drying temperature: approx. 55 - 60°C - With heat exchanger, heating water - Without heating water control valves - Pass-through direction: U-shape - Infeed side: right - Feed speed via frequency control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: approx. 23 kW - Voltage, Hz: 400 / 50 - Voltage fluctuation max. +/- 5 % - Without control valves and water pumps Item 6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035

Stanje: rabljeno, CNC obdelovalni center BIESSE Rover C 6.50 CONF.2, letnik 2007. -Delovna površina: cca 140 × 460 cm -Dimenzije stroja: 300 × 650 cm -Masa (teža) pribl. 6100 kg -Dve delovni glavi -Magazin: 22 mest -Vertikalni svedri: 28 kosov -Bočni svedri: 12 kosov Duodpfx Afsw Rpd Se Ser Cena po dogovoru, na voljo takoj. Cena je brez DDV.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Verfahrwege Arbeitsbereich 1: X: 6450 mm, Y: 1535 mm, Z: 250 mm, Arbeitsbereich 2: X: 6200 mm, Y: 1535 mm, Z: 250 mm, Arbeitsbereich 3: X: 6200 mm, Y: 1520 mm, Z: 275 mm, Achsenverfahrwege Konfiguration 1: X: 6820,5 mm, Y: 1963 mm, Z: 350 mm, Achsenverfahrwege Konfiguration 2: X: 6820,5 mm, Y: 1963 mm, Z: 350 mm, Achsenverfahrwege Konfiguration 3: X: 6820,5 mm, Y: 1963 mm, Z: 663 mm (5-Achs-Kopf), Z: 350 mm (zusätzliche Bearbeitungseinheiten), Steuerung: Biesse XP600. Wartungen: komplette C-Achse wurde 2015 inklusive Zubehör erneuert, Vakuumpumpe wurde 2016 vollständig ausgetauscht, inklusive Balgen, Schläuchen und weiteren Elementen, 2021 wurde die Maschine mit einem neuen, leistungsfähigen Steuerungs-PC ausgestattet, auf dem ein aktuelles Windows 10 Betriebssystem läuft. Mit umfangreicher Dokumentation. Eine Besichtigung vor Ort ist möglich. Duodpfx Aeylziijf Ser

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable passage height Z = 350 mm with H50 suction cups OF0165 Axis travel speed for Accord 40 fx PRO-SPEED version OF0168 Pendulum mode OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via internet 450328 eye-M PRO operating console with integrated PC 450291 Additional fixed operating panel 870068 TECPAD - remote control for machine functions 560058 No. 10 MATIC support rails - L1825 230429 MAXI processing unit - Prisma KT 1 870046 Preparation for right-angle head "Prisma KT-KS" 470014 Air nozzle for tools 870119 Tool length measuring device 870120 Panel thickness measuring device 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 support rails 510205 Preparation for clamping jaws for worktable with 10 support rails 480178 Front stop row H110 for worktable with 10 support rails 480105 Rear stop row H110 for worktable with 10 support rails Dujdpfjyfgzdjx Af Sor 480137 First side stop row H110 for worktable with 10 support rails 480005 Suction cups H110 145x145 mm, 36 pcs 480006 Suction cups H110 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC support rail 10 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving systems 210837 TR12 – side tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-Machine Interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operation interface software Maestro cnc OF0435 Maestro cnc hardware dongle 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED: - Increased max. panel width for complete machining up to 2,120 mm; beam length remains unchanged at 1,900 mm. - 10 support suction cups for offcuts. MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE NEW 2023 EUR 399,890.--

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.670 mm, pomik po osi Z: 500 mm, število osi: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and C-axis rotation from 0–360°. The machine is equipped with a linear tool changer with 12 positions and a comprehensive drilling head with 16 spindles. In addition, it has a robust safety system with light curtain. Take advantage of this opportunity and purchase this CNC machining center Felder Format 4 Profit H 200. Contact us for further information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depending on clamping system) • Operator terminal on the left side of the machine • Handheld terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction pads • Vacuum connection for template routing (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including storage for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling depth 70 mm; shank diameter 10 mm • Grooving saws: 2 (one X, one Y); max. blade diameter 120 mm; max. thickness 5 mm; continuously adjustable speed up to 7,500 rpm Dedpfxjx D D Hme Af Sjur • Safety: Front light curtain system