Coima Group Stacionarni Odsesovalni Sistem nakup rabljenega (12.065)

Stanje: novo, Leto izdelave: 2025, Laser power: 12,000 watts Working area during laser operation: 4,000 x 2,000 x 270 mm Positioning speed X/Y/Z: 200 m/min Simultaneous: 280 m/min Max. workpiece weight: 3,000 kg Max. mild steel thickness: 30 mm Max. stainless steel thickness: 30 mm Max. aluminium thickness: 25 mm Max. copper thickness: 10 mm Max. brass thickness: 20 mm Length: 12,500 mm Width: 3,650 mm Height: 2,620 mm Machine weight: 18,000 kg Standard equipment Main components 1. Fiber laser source: D-Soar (_CE&UL), Raycus 2. Cutting head: Bystronic DNE Copyright 3. Cutting software: Hypcut FSCUT 8000C Bus Control 4. Rack and pinion (X & Y axis): M3 by Herion 5. Shuttle table: Parallel shuttle table (dual layer) 6. Ball screw: TBI (Taiwan) 7. Linear guide rail: Won (South Korea) 8. Gear reducer: Neugart (Germany) 9. Servo drive and motor: Inovance or Schneider 10. Machine bed: Welded machine frame 11. PC: Intel i7 CPU, 8GB RAM, 120GB SSD, 10kW 12. Monitor: Capacitive touchscreen (21.5", XC-2209CMDR) 13. Proportional valve: Felton Low Pressure, 10kW 14. PLC hardware: Schneider 15. Solenoid valve: High pressure: CEME; Low pressure: Airtac 16. Gantry: Aerospace aluminum cutting bridge, steel die-cast 17. Chiller: S&A, custom 18. Electrical control cabinet: Independent control panel (Bystronic DNE Copyright) Electrical connection (machine incl. laser source and chiller) The supply voltage provided by the utility must meet the requirements of EN 50160 and IEC 60364-1. Stable voltage is a prerequisite for reliable performance. Power supply must remain consistent across the full network tolerance and not be subject to voltage fluctuations, such as those caused by spot welding systems. If such quality of power supply cannot be guaranteed on site, the system must be equipped with a transformer and/or a voltage stabilizer. Machine power supply, incl. laser module: Phases: 3 phases & PE Supply system: TN Cjdpfx Asv Uz Tief Dogu Main frequency: 50/60 Hz Supply voltage: 3 x 380 V Max. allowable voltage fluctuation 50 Hz: +/- 10% Max. allowable voltage fluctuation 60 Hz: +6/-13 % Main fuse: 150 AT Machine: 9 kW Hydraulic shuttle table: 15 kW Extraction: 7.5 kW Resonator: 36 kW Chiller: 15 kW Total nominal power consumption*: 80.5 kW Power factor (cos φ): 0.83 Average power demand: 30.75 kW * Values measured at full laser power and ambient temperature of 20°C. Values are based on an average material mix assumption. Compressed air (machine, laser source, chiller, extraction) Compressed air quality in accordance with ISO 8573-1:2001. To prevent contamination from the compressor, an oil-free screw compressor with downstream air treatment (dryer) is required. Min. supply pressure at supply unit: 20 bar Maximum consumption: 1.05 m³/min Max. compressed air temperature at maintenance unit inlet: 43°C

Stanje: novo, Leto izdelave: 2025, Laser power: 30,000 watts Laser working area: 28,000 x 4,000 mm Positioning accuracy X/Y/Z: 0.1 mm / 10 m Max. workpiece weight: 30,000 kg Max. mild steel thickness: 60 mm Max. stainless steel thickness: 50 mm Max. aluminium thickness: 40 mm Max. copper thickness: 20 mm Max. brass thickness: 20 mm Length: 35,500 mm Width: 11,000 mm Height: 3,000 mm Machine weight: 45,000 kg Standard equipment - Fixed machine table - Fiber source: Raycus - Cutting head: DNE by Power - Linear guides: HIWI Taiwan - M3 rack and pinion: Herion / Güdel - Planetary gearboxes: Neugart Cgsdpfxev U A Nxo Af Dju - Servo drives: Yaskawa - PLC hardware: Schneider Additional equipment Optional with bevel cutting

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 140311, največja širina rezanja: 1.150 mm, Oprema: dokumentacija / priročnik, Rezalnik papirja – DATIEN 115 ECE skupina SBL Model: CT – 115 ECE Leto izdelave: 2014 Serijska številka: 140311 Stanje: Odlično. Rezalnik je bil uporabljen zelo malo. Stroj je priključen, možnost testiranja. Cedst U D Huspfx Af Degu Rezervni rezili – 2 kosa, skupaj 3 kosi. Popolna tehnična dokumentacija. Privlačna cena za hitro prodajo.

Stanje: rabljeno, Leto izdelave: 2017, skupna masa: 512 kg, skupna širina: 1.400 mm, skupna dolžina: 1.400 mm, skupna višina: 2.660 mm, vrsta vhodnega toka: trifazni, negativen tlak: 4.600 Pa, filtrirna površina: 14 m², sesalna zmogljivost: 2.655 m³/h, Odvod prahu, odsesovalec znamke RINGLER/Karcher Group, samodejno čistilni vakuumski filter, absorber, odpraševalec za odsesavanje grafitnega, kovinskega, mineralnega prahu, trdih vlaken, gorljivih, nevarnih, toksičnih snovi in učinkovito zbiranje procesnega prahu, peskanja, soda peskanja, brušenja, poliranja in vseh vrst suhega prahu. Vakuumski ventilator je nameščen za filtrom na čisti strani, kar zmanjšuje tveganje eksplozije na minimum. Znamka: Ringler / Karcher Group Model: RE201 D5,5 IE3 Žepni filtrirni vložek - multižep Ventilator z močjo 5,5 kW Csdpfx Aoxn Rguof Djgu Pretok 2655 m3/h Vakuum 4600 Pa Filtrirna površina 14 m2 Premer vstopa: 180 mm / 125 mm Elektromotorsko čiščenje filtra Naprava v zelo dobrem stanju. skladiščna številka: 1051

Stanje: generalkompletno obnovljen (rabljeno), - CNC upravljalni stroj za rezanje kartona\n- Izdelano po naročilu skupine LCR\n- Popolnoma obnovljeno Codpfx Afoxbidlo Dsgu

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit Cgodpjwhmdfjfx Af Deu - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a production line Edge Material (roll) Thickness (min/max) mm: 0.3 / 3 Panel Thickness (min/max) mm: 10 / 60 Working Width (min/max) mm: 230 / 1600 (approx.) Control / Software: WinEdge Feed Speed (adjustable) m/min: 10 - 30 (approx.) Protective and soundproof enclosures SIZING UNIT (per side): No. 2 Hogging units (2 x 5.8 kW approx.) No. 2 Jointing units aft (2 x 4 kW approx.) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) Pressing zone (CNC-controlled) Edge magazine for rolls (slot number): 6 Pre-milling unit 08.055 (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx., 0°-30°) No. 5 Universal milling units for grooving/rabbeting and profiling (5 x 4 kW approx.) Profile scraping unit Flat scraping unit Spraying unit (for polishing liquid) Buffing unit + hot air blower – edge finisher Cedpjl Hydmefx Af Dogu

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness in rolls (min/max): 0.4 / 3 mm Panel thickness (min/max): 14 / 60 mm Working width (min/max): approx. 260 / 3200 mm Control / Software: MAESTRO PRO EDGE Feed speed (adjustable): 10–40 m/min Safety and noise protection cabin + cam spacing (mm): 400 Panel processing (for each side): - Protection cutter (pre-milling) AS (1 x 4 kW) - Chipper unit DTR (2 x 8 kW) - Spray unit (for liquid anti-adhesive) AAR EDGE BANDING SECTION (for each side): - Radiator to heat workpiece edges - Gluing station (hot melt + pre-melter) - Pressure zone (CNC controlled) - Motorised edge magazine for rolls (2 positions) - End trimming unit YU/SP-750 (30 m/min) - Pre-milling unit RSP - Multi-profile milling unit (CNC controlled) RI/S 2P - Copy shaping unit (profile tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM and Fast-Release - Profile scraping unit RAS/S - Flat scraper unit RCA/2C - Spray unit (for polishing liquid) Cedpewhi Slefx Af Degu - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max, option): mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and noise protection cabin Cam spacing (mm): 500 EDGING PROCESSING (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Rough-milling unit (2 x approx. 5.8 kW) Universal profiling spindle, 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (2-fold) + edge pressure zone End trimming unit (2 x approx. 0.35 kW) Pre-milling unit (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW) 0°-30° Multi-function unit (radius/contour milling unit) with 2 revolvers (8+8 positions) – max. 27 m/min Codpok Nk R Dofx Af Dsgu Universal grooving/rebating and profiling spindle 1 x approx. 4 kW (0° - 90°) Profile scraping unit + flat scraping unit + buffing unit

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Cgodpfxedg Itns Af Deu Dowel magazine for automatic dowel feeding: No. 2

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (with carriage gliding on them) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal adjustable metal arms with vacuum suction pads OPTIONAL: No. 2 external roller conveyors (on the floor) for stack input of panels to the loading station No. 1 external motorized roller conveyor (for receiving panels from loading station) Separate electrical control panel Electronic control system Perimeter safety fencing with safety mats Total connected load 17.7 kW Cjdpfxoflc T So Af Dogu Operating capacity (cycles/min) approx. 16-20 Panel thickness (min/max) approx. 10-50 mm Min. panel dimensions approx. 250 x 320 mm Max. panel dimensions approx. 1200 x 3000 mm

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED DESTACKING - Bridge Cjdpfsd Rg Dzsx Af Dogu Vacuum system (with pump) No. 2 vertical support columns of the upper carrying beam No. 1 horizontal upper carrying beam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with vacuum suction cups, adjustable No. 2 external roller conveyors for stack discharge No. 1 external motorized roller conveyor for stack discharge, also with belt for rotation of panels by 90°. Dimensions approx. 7168 mm Separate electrical control panel Electronic controller OMRON Perimeter safety fencing with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 - 50 mm Min. panel dimensions: approx. 250 x 320 mm Max. panel dimensions: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) Csdpfx Aod Rg Dpof Dsgu No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Cedpfx Asdz Uk Tef Dsgu Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks Cgedocggy Sepfx Af Dju - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: Cgedpfxed Nviqo Af Dou VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (First & Second in a machine line) Electronic control – Programmable With separate electrical and control panel Safe and soundproof enclosure No. 1 vertical column, for supporting work units Cedegz Alxopfx Af Dogu Min. useful working width (mm): 220 Max. useful working width (mm): 3000 Min. useful working thickness (mm): 6 Max. useful working thickness (mm): 60 Retractable positioning cams, spacing (mm): 400 Feed (min/max) steplessly adjustable (m/min): 4–24 Total power: 40 kW No. 3 working units (for each side of the machine): 1 automatic scoring unit: 2.2 kW / 3.2 kW 1 chipping unit: 5.5 kW / 7.3 kW (RPM 3000 / 6000) 1 universal milling unit (electropneumatically controlled): 4 kW / 5.8 kW (RPM 3000 / 6000)

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 Cgjdjd Nvi Depfx Af Dju WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: zelo dobro (rabljeno), RETURN SYSTEM for Edgebanding Machine (LEFT) When combined with a single-sided edgebanding machine, this system allows a single operator to continuously feed the machine (the processed workpiece is automatically returned to the operator). Roller conveyor with 180° conveyor belts: 2600 mm x 1800 mm 1st Conveyor line: 7000 mm x 900 mm 2nd Conveyor line: 2500 mm x 850 mm Cgjdogz Atbjpfx Af Dou Model: BOOMERANG BONSAI

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) Cgodjgwbbqspfx Af Dou No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (gantry loader, double station) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electrospindles ISO 30 (each 3.7 kW) with tool magazines with 3 positions each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool holder magazines (revolver) with 56 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor, with turnover unit (180°—top side down) "RBO" Mod. Ribaltatore E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: 2 electrospindles ISO 30 (each 4.5 kW) with 3 tool magazines each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool magazines (chain type) with 60 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Unloading station (gantry double station) "RBO" Mod. Advantage SC Cgjdpfx Afsgvdkgj Deu

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor Cjdpfx Ajd Tyvxsf Djgu - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Contro Open powerTouch, Software: WoodWOP (TAPIO Ready) Infeed Table (panel support) + Outfeed Table (panel support) Panel feed via 3 transport belts Min. workpiece dimensions (X-Y-Z): 250 x 100 x 12 mm Max. workpiece dimensions (X-Y-Z): 2500 x 1050 x 60 mm Special lateral guiding system for workpieces with "sensitive" edges 3 upper vertical pressure devices Powered conveyor belt for waste disposal Integrated electrical and control cabinet Total installed power: approx. 47 kW OPTIONAL: Wireless barcode scanner 2 WORKING UNITS (TOP) – (SERVO MOTOR for X-Y-Z axis): 4 V15 drilling heads (4 x 2.3 kW) each with 15 vertical spindles (total of 60 upper spindles) 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR for X-Y-Z axis): 6 V32 drilling heads (6 x 2.3 kW) each with 32 vertical spindles (total of 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 H21 drilling heads (2 x 2.3 kW) with horizontal spindles Cgodpfx Afex Aqi Es Dsu 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, PLATTENAUFTEILSÄGE WINKELANLAGE Steuerung PowerControl V2.1 - CADmatic 5 (Tapio ready) Angetriebene Rollenbahnen mm 2200 x 4500 ca. Hubtisch (mm) 4300 x 2200 1° Einschiebersäge mit Nr. 4 Spannzangen 1° Plattenaufteilsäge Max. Schnittbreite (mm) 4300 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 2° Einschiebersäge mit Nr. 8 Spannzangen 2° Plattenaufteilsäge Max. Schnittbreite (mm) 2200 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Cgodpfx Afex Aqdcj Deu Regelbarer Sägewagenvorschub (m/min) 1 - 130 Nr. 2 vordere Luftkissentische (2 x mm 800 x 2810) Gesamtanschlusswert A 102 OPTION: Nr. 1 Schrottschleifer

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Control system: Power Concept Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT With clamping grippers Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Cgodpfjimr Icox Af Dju Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)