Cev Za Odvajanje Varilnega Dima nakup rabljenega (83.230)

Stanje: rabljeno, Leto izdelave: 1990, Technical details: Tube diameter: 42 mm Wall thickness: 2.5 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feed length: 3000 mm Control: Software RC 7000 Machine weight approx.: 2.8 t Control cabinet dimensions: 800 x 700 x 2000 mm Machine dimensions (LxWxH) approx.: 5.1 x 0.7 x 2.0 m Application: Machining of deformable tubes, rectangular tubes, round bars, and square tubes Codpfx Aeu Ibvuof Dsgu Software designation: RC7000, programming manual Rectangular tube: 42 x 20 x 2.5 mm Bending direction: left Operation via control panel Accessories: -various bending tools for tube Ø 25 mm -12 various clamping collets -various auxiliary and clamping devices

Stanje: rabljeno, Technical Details: Sheet width: 1080 mm Sheet thickness: 1.25 mm Frame spacing: 1200 mm Dimensions (LxWxH): 1.9 x 0.6 x 0.9 m Additional features: 2x Bending rollers: -Ø 63 x 1080 mm -the top roller is swiveling -the bottom roller has an adjustment travel of 12 mm -manual drive via hand crank Cgedpfx Afsu Icdye Dou 1x Guide roller: -Ø 63 x 1080 mm -idle running -adjustment travel approx. 5 mm

Stanje: rabljeno, Leto izdelave: 1989, Tehnične podrobnosti: Širina pločevine: 1600 mm Debelina pločevine: 20 mm Najmanjša debelina pločevine: 6 mm Število ravnalnih valjev: 11 Premer ravnalnih valjev: 180 mm Ravnalna hitrost: 10 m/min Priključna moč: 76 kW Skupna poraba moči: 75 kW Teža stroja pribl.: 39,2 t Cgedsyvfy Topfx Af Deu Stroj za ravnanje hladne pločevine UBR 20x1600

Stanje: rabljeno, Technical details: Table length: 865 mm Cgjdsu Nkn Ajpfx Af Dsu Table width: 780 mm Table height: 40 mm Height above floor: approx. 815 mm Machine weight approx.: 140 kg Space requirement approx.: 0.87 x 0.8 x 0.82 m Marking-out plate – Surface plate Marking-out plate with 3 legs

Stanje: rabljeno, Leto izdelave: 1995, Technical details: Punching force: 25 t (250 kN) Passage width: 1800 mm (1660 mm usable) Clear span between uprights (max./min.): 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic trolley beam punch Hydraulic pressure: 250 bar Punch table area: 1830 x 500 mm Punch carriage/plate: 500 x 500 mm; travel speed: 800 mm/sec; punching stroke: 63 mm/s, feed/return: 125/125 mm/sec. Operation via control panel and pushbutton/control lever Cedpfx Afsu Szfuj Djgu Equipment: 2x feed rollers, Ø 120 x 1630 mm, pneumatic in/out

Stanje: rabljeno, Technical Details: Sheet width: 1000 mm Sheet thickness: 3.0 mm Minimum sheet thickness: 0.5 mm Frame opening: 920 mm Number of straightening rollers: 4 pcs. top / 4 pcs. bottom Roller diameter: approx. 75 mm Number of rollers: 2 pcs. top and 2 pcs. bottom Machine weight approx.: 6.5 t Dimensions (L x W x H): 3.8 x 2.2 x 2.1 m This is a plate straightening machine with hydraulic feed. Further features: 4 top straightening rollers Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 bottom straightening rollers Ø 75 x 830 mm, fixed, hydraulic 4 extraction rollers Ø 110 x 480 mm, 2 adjustable at the top (approx. 20 mm) and 2 at the bottom, hydraulic Roller mounts Infeed height 1400 mm Equipped with hydraulic unit External operation Recommendation: Complete as a strip processing line (decoiler + loading device + straightening machine with hydraulic feed) available for sale, optionally together with stock no. 0100572. Codpovgbgaofx Af Djgu

Leto izdelave: 1994, stanje: rabljeno, Tehnične podrobnosti: Debelina pločevine: 1,0 mm Premer cevi: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm Debelina stene: 0,6 / 0,7 / 1,0 mm Dolžina vlečenja cevi: 150 - 1000 mm Krmiljenje programa: SPS Simatic S 5 Potreben zračni tlak: 5 bar Obratovalna napetost: 380 V Krmilna napetost: 24 V Skupna potrebna moč: 3,5 kW Dimenzije D x Š x V: 1,2 x 1,0 x 1,6 m Stroj za vlečenje cevi, trenutno opremljen za Ø 130 mm. Uporaba: npr. za pečarske cevi, cevi se valjajo na želene dimenzije – Vstavljanje in odstranjevanje obdelovancev je ročno – Upravljanje preko upravljalne plošče – Samodejni in nastavljivi način delovanja Dodatne značilnosti: Cjdpfju Icv Asx Af Degu Debeline pločevine: 0,6 / 0,7 / 1,0 mm Dolžina obdelovanca 150 - 1000 mm Različen pribor/orodja za Ø 120 in Ø 130 mm ter drugo, kot na fotografiji *

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control unit for program: Gelma MM-1 Tube feed length: 1800 mm Approx. machine weight: 0.232 t Cedpfxsu Ibyye Af Dsgu Machine dimensions (LxWxH): approx. 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes: manual and semi-automatic operation Application: for multiple, repeatable bending operations of tubes (e.g. hydraulic piping) The swiveling unit with pre-selection for 3 different bending angles, usable in single or automatic mode. Currently, the machine is equipped with a stop rod for a tube size of Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm

Stanje: rabljeno, Technical details: Length: 640 mm Width: 465 mm Thickness of clamping plate: 90 mm Approximate machine weight: 70 kg Codpfx Afju Nkrne Dogu Marking plate – Surface plate – Steel plate

Stanje: rabljeno, Leto izdelave: 1997, Technical Details: Tube diameter: 4.75 - 8.0 mm Wall thickness: - mm Bending radius min.: varies, various, variada mm Max. bending angle: 180° Compressed air: min. 4.5 bar Total power requirement: approx. 10 kW Machine weight approx.: 6.0 t Machine dimensions approx. LxWxH: 6.3x3.7x2.0 m Control cabinet dimensions: 1.8x0.5x2.7 m Operator panel dimensions LxWxH: 0.85x0.68x1.65 m Fully automatic, numerically controlled system For bending hydraulic lines and automotive brake lines of various lengths. - Variable number of bends possible (max. 100 bends per tube) - 2 different, independent bending modules. Each module has 2 NC axes with the following functions: "Longitudinal travel" (axis 1 + axis 3) with max. travel speed 2.0 m/sec, and "rotation of bending head" and "bending" (axis 2 + axis 4) with max. bending angle 180° Cjdpfou Ibuksx Af Djgu - Program memory for up to 250 line specifications - The loading unit consists of a manually refillable drum magazine (capacity in the drum magazine for tube Ø=4.75 mm to Ø=8.0 mm: 500/1000 pieces) - Feeding is done by a swivel-loading arm - Control panel Bundy GHF 60134 Accessories: - various single and mounted parts - incl.

Stanje: rabljeno, Technical details: Weight: Price calculated per kg Various crane runways Item 1: Columns for crane runway 6 pieces double-T beams, length: 4.66 m x width: 22 cm x height: 54.5 cm Cgjdpfou Nvkvex Af Dou 1 piece double-T beam, length: 4.71 m x width: 21.5 cm x height: 55 cm Item 2: Crane runway 4 pieces I-beams, length: 7.16 m x width: 22 cm x height: 54.5 cm 2 pieces I-beams, length: 6.25 m x width: 22 cm x height: 54.5 cm 2 pieces I-beam end sections with stopper, length: 6.93 m x width: 22 cm x height: 54.5 cm Item 3: Crane runway 4 pieces I-beams, length: 5.90 m x width: 21.5 cm x height: 55 cm 2 pieces I-beams, length: 4.10 m x width: 21.5 cm x height: 55 cm 2 pieces end sections with stopper, length: 6.05 m x width: 21.5 cm x height: 55 cm Item 5: 10 pieces support beams, length 6,400 mm, TT-profile 180 x 180 mm, weight 2,420 kg Subject to prior sale. As long as still available. Please state precisely which beams you are interested in when making your inquiry.

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Širina pločevine: 3050 mm Debelina pločevine: 16 mm Upogib: 12 Razdalja med stojali: 5200 mm Premer zgornjega valja: 330 mm Codpfx Afsyh D Nne Dogu Premer spodnjega valja: 360 mm Skupna moč: 15 kW Teža stroja pribl.: 18,0 t Mere stroja pribl. D x Š x V: 5,3 x 2,4 x 2,0 m Izdelava konusnih odsekov / konusno upogibanje 70 % možnih debelin pločevine za krožno valjanje se lahko obdela kot debelina pločevine pri valjanju konusov Pri valjanju konusov je maksimalna obdelovalna debelina pločevine cca 8 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: ročni, vrsta aktuacije: mehanski, najv. debelina pločevine: 10 mm, Oprema: naprava za krivljenje stožcev, nožno daljinsko upravljanje, Mehanska tribralna valjčna stiskalnica OMEG Uporabna dolžina krivljenja: 2050 mm. Premer spodnjih valjev: 200 mm Premer zgornjega valja: 250 mm Cgjdpfxey H Ikkj Af Dju Debelina materiala za preoblikovanje: 8-10 mm. Naprava za stožčasto krivljenje Podaljšani valji za krivljenje profilov Rabljeni stroj, popolnoma delujoč.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, SHUZ TUNG CNC38BR2 CNC Cevni Uginjalni Stroj Proizvajalec: SHUZ TUNG Machinery Industrial Co., Ltd. (Tajvan) Model: CNC38BR2 Leto izdelave: 2018 Tehnični podatki: * Največja zmogljivost cevi: 38 x 2 mm * Moč: 22 KM * Napajanje: 400 V * Teža stroja: 2.500 kg Opis: SHUZ TUNG CNC38BR2 CNC cevni uginjalni stroj v zelo dobrem tehničnem in vizualnem stanju. Stroj je opremljen s CNC krmilnim sistemom in se prodaja skupaj z obsežnim paketom orodij. Primeren za upogibanje jeklenih, inox, aluminijastih in drugih kovinskih cevi. Stroj ima popolnoma zaprto varnostno zaščito ter avtomatsko podajanje cevi. Idealen za avtomobilsko industrijo, pohištveno industrijo, izdelavo ograj, izpušnih sistemov in industrijsko proizvodnjo cevi. Priložena orodja: Cgjdpeza Sw Hjfx Af Dou * Ø8 mm – R17,5 * Ø10 mm – R15 * Ø10 mm – R28 * Ø12 mm – R26 * Ø12 mm – R50 * Ø14 mm – R30 * Ø16 mm – R25 * Ø16 mm – R38 * Ø16 mm – R50 * Ø16 mm – R60 * Ø22 mm – R32 * Ø22 mm – R50 * Ø24/25 mm – R48 * Ø25 mm – R45 * Ø25 mm – R60 * Ø28 mm – R100 * Ø30 mm – R63 * Ø35 mm – R63 * Ø35 mm – R70 Stroj je mogoče pregledati na lokaciji. Pomoč pri nakladanju zagotovljena. Lokacija: Poljska. Dodatne fotografije in videoposnetki so na voljo na zahtevo.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 1.500 obr/min, hitrost vretena (min.): 5 obr/min, dolžina podajanja os X: 1.200 mm, dolžina pomika po osi Y: 2.000 mm, dolžina podajanja os Z: 700 mm, hitrost pomika os X: 1.000 m/min, hitrost podajanja osi Y: 1.000 m/min, hitrost podajanja os Z: 1.000 m/min, skupna širina: 4.000 mm, San Rocco horizontal boring mill, fully overhauled, from a high-quality aerospace manufacturing operation. CNC control system: Siemens SINUMERIK 840D with SIMODRIVE 611 drive system. The machine is equipped with modern digital drives and is suitable for high-precision multi-axis machining in continuous operation. The machine was overhauled in 2024 and received brand new telescopic covers on all axes, as well as numerous additional minor but essential refurbishments to the hydraulics, CNC control, hoses, and all types of seals. The machine is comprehensively equipped with coolant system, etc. Travel distances: X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle data: Boring spindle diameter: 100 mm Tool holder: ISO 50 Milling spindle diameter: 185 mm Spindle axial stroke: 700 mm Feeds and rapid traverses: Automatic feed, spindle and vertical axis: 2 × 1,000 mm/min Rapid traverse, spindle and vertical axis: 5,500 mm/min Clearances: Min. spindle height above table: 0 mm Max. spindle height above table: 1,500 mm Maximal distance spindle nose to table center: 1,850 mm Spindle speeds: Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gear stages: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table data: Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Csdjx Rhlcjpfx Af Djgu Table feeds: Automatic feeds X and Y: 1,000 mm/min each Rapid traverse X and Y: 5,500 mm/min each Table rotation: Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive system: Siemens SIMODRIVE 611 E R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting & transport data: Group 1: Steel bar, diameter 70 mm, length 1,600 mm Steel bar, diameter 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel cables, diameter 22 mm Weight approx. 12,500 kg Group 2: Two steel cables, minimum diameter 18 mm Weight approx. 3,500 kg Group 3: Manual lifting Weight approx. 1,300 kg Condition: The machine is in very good technical condition and can be inspected and tested under power by appointment.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Parker 82C 061 preša za cevi za cevi od 1/4" do 1 1/4" (odvisno od čeljusti za prešanje) s 5 kompleti čeljusti za prešanje (barve glej slike). Priložen je tudi hidravlični agregat Enerpac PUJ1200E ter rezalnik cevi TONE SM 210-SL, letnik 03/2016. Miza je vključena v ponudbo. Cgedpfx Afeyy Spdj Deu Naprave so bile preverjene glede funkcionalnosti in imajo izvedene elektro preglede s strani elektro podjetja.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 600 mm, skupna širina: 400 mm, skupna višina: 690 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small parts. Thanks to its compact design, the unit is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created and marked with just a few clicks and minimal programming knowledge. The software automatically increments serial and article numbers after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. A laptop with Windows operating system and laser software is included as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Cgsdpfxjy Emthj Af Dsu - Fiber laser 20 watt (optional: 30 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-trap safety stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna dolžina: 800 mm, skupna širina: 600 mm, skupna višina: 1.660 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta laserja: vlakenski laser, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) Cjdpfxev Sybyj Af Degu • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2026, Ring bending machine model MB 50 - Complete with standard roller set - and foot pedal - Mechanical adjustment of the pressure roller Cgedpedkxlkjfx Af Dsu - Two driven rollers - Usable horizontally and vertically - Bending capacity up to 60x10 mm on edge - Round tube up to 60 x 3.6 mm - Angle iron 50x50x6 mm - Solid material 35 mm - Drive motor 1.5 kW, 400 Volt, 3-phase - Shaft rotation speed: 4.5 rpm - Shaft diameter: 50 mm - Weight: 325 kg

Stanje: novo, Leto izdelave: 2026, Brusilnik cevi AL 100 U ⦁ brusi pod vsakim želenim kotom ⦁ brusi vsak želeni premer ⦁ brusi vse običajne materiale ⦁ primeren za cevi in profile - Upravljanje z ekscentrično ročico - Brusilni trak 100 x 2000 mm Cjdpjx Irvmofx Af Dogu - Motor 3,0 kW 400 V 50 Hz - Število vrtljajev 2905 vrt./min - Hitrost traku 30 m/s - za cevi od 20 mm do 76 mm - Teža 200 kg

Stanje: rabljeno, Leto izdelave: 1982, Stolpna vrtalna stroj GSP tip 205 R Vreteno: Ø 100 mm Konus: CM4 Izstop vretena: Ø 300 mm Vrtljaji: od 12 do 1800/min Velikost mize: 800 x 400 mm Leto izdelave: 1982 Maksimalna razdalja nos vretena/miza v spodnjem položaju: 700 mm Minimalna razdalja nos vretena/miza: 250 mm Globlina vrata: 400 mm Križna miza: 1150 x 400 mm Funkcija vrtanja/vrezovanja navojev Samodejni pomik vretena Ročni spust vretena je težak (v avtomatskem pomiku deluje brezhibno) Ročno dviganje/spuščanje mize Napetost: 380 V Širina: 1300 mm Globina: 1700 mm Skupna višina: 2700 mm Codpfx Aozbhu Rjf Djgu Teža: pribl. 1,5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Pritisna sila: 20 t Za premer cevi: 3/8; 1/2; 3/4; 1; 1 1/4 in 1 1/2 in 2" Cgodpfjy Uv Dnjx Af Dju Hidravlični pogon: 380 V, 0,55 kW Dimenzije: 750 x 650 x 900 mm (višina) Teža: 170 kg

Leto izdelave: 2017, stanje: rabljeno, Serijska št. 15-6139B, CNC krmiljenje z zaslonom na dotik, taktni dovajalni transporter, robot, proizvajalec Yaskawa, tip YR-MH00012-A00, letnik 2011, robotsko krmiljenje DX200, Teach-In terminal, izhodna proga za zaboje, dolžina 7.000 mm, krmilne/komandne omare, ohišje iz pleksi stekla, periferni agregati, strojna oprema Cgedpey A In Ujfx Af Dsu Ob predhodni prodaji si pridržujemo pravico do spremembe.

Leto izdelave: 2016, stanje: rabljeno, Ser. no. 15-3599B, consisting essentially of: loading station with 2 product lanes, continuous cycle conveyor belt, 2 forming stations, turning station, micro-lubrication station, continuous washing system, make Bous, type Duwamat K1000 WSST, year 2016, ser. no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16 - 24°, fine filter, oil separator, control cabinets, system control with operator panel, make Siemens, type SIMATIC HMI touch, inspection system with 2 cameras, make KEYENCE, type Vision System, eddy current tester, make Rohmann, type Elotest IS500, laser marking system, make Videojet, type 7510, fiber laser, laser power 50 W, output station, roller conveyor system for crate discharge, 2 product lanes, satellite terminals, control cabinets, safety devices, plexiglass enclosure, peripheral equipment including extraction system, make ESTA, type Whispersog 2.2 JET, locknut feeding system with feed hopper, vibratory bowl feeder, separator, insertion station, batch of trolleys, batch of load carriers, trolleys. Cgedpfx Aoy A Ih Uef Dsu Subject to prior sale.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: MG EVO, model krmilnika: 4axis autocalc, število valjev: 4, premer spodnjega valja: 240 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 180 mm, premer valja: 300 mm, dolžina valja: 4.100 mm, delovna širina: 4.000 mm, delovna višina: 800 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, maks. debelina pločevine iz nerjavečega jekla: 4 mm, moč: 5 kW (6,80 KM), vhodna napetost: 400 V, število digitalnih zaslonov: 4, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, model kapaciteta 4000 x 6 mm CNC EVO valjarna za pločevino Hidravlični 4-valjni stroj za upogibanje pločevine rabljeno, letnik 2017 maksimalna debelina valjane pločevine 6 mm pred-ukrivljanje pločevine 4 mm minimalni premer valjanja (notranji) 300 mm maksimalna širina pločevine na valjih 4100 mm glavni valj premer 250 mm spodnji valj premer 240 mm stranski valji premer 180 mm Moč hidravlične enote 5,5 kW, napetost 400/50 – 480/60 V Vgrajena oprema kaljeni valji z visoko površinsko trdnostjo valjanje stožcev, konično upogibanje Cgsdpoy I Sp Tofx Af Deu Električna krmilna konzola CNC EVO, 4 osi avtomatski programabilni cikel z možnostjo uvoza risb iz CAD postaje kompenzacija valjanja na osnovi podatkov o dejanski trdnosti materiala pločevine Hidravlični pogon centralnih valjev Paralelno delovanje 4 valjev je zagotovljeno z dolgo življenjsko dobo s torzijsko letevjo Nastavitev pred-ukrivljanja glede na realno trdnost materiala pločevine za najboljši rezultat Odprta prednja stran s preklopnim zaključkom za izmet zaprtih plaščev Sistem za ponovno valjanje varjenih plaščev za natančno kalibracijo Vgrajeni varnostni in izredni izklop Dokumentacija: navodila za uporabo, sheme, servisna in inštrukcijska literatura