3-valjni stroji za valjanje pločevine z električnim pogonom

KK-Industries CYL 130-20/4.0

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration / Trade Show / New Machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipping knives: 2 pcs Number of counterknives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Rjdpow I R Rnefx Altocd Number of infeed rollers: 3 pcs Throughput capacity: up to approx. 20 stacked cubic meters/hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Infeed roller drive power: 2 x 2.2 kW Operating/control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, and infeed method S&F chippers and drum chippers with horizontal infeed are used in many sectors of the wood processing industry (sawmills, timber plants). The “ATH” series chippers produce high-quality, homogeneous wood chips with low fines content from wood residues, e.g., as premium chips for the pulp industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible application - Custom manufacturing Do you need further information? Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Shredder

Stanje: novo, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10,600 kg Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar Bending performance: 13.0 mm » with 3x top roll diameter Pre-bending: 10.0 mm » with 1.5x top roll diameter Top roll diameter: 270 mm Lower roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of the top and bottom rolls via planetary gear • Digital readout for side roll positions • Hydraulic drop-end bearing Rcodpfxsd Ab H Ie Altsd • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic lower roll adjustment via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment in accordance with CE directives See catalogue via the following link:       Important notes for conical rolling: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must exceed 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Sheet length: 2050 mm Sheet thickness: 3 mm Total power requirement: 2.2 kW Weight approx.: 1,500 kg Dimensions (LxWxH): 3,200 x 750 x 1,000 mm Technical Data Roller diameter: 130 mm Equipment • 3 rollers • Asymmetric roller arrangement – with pre-bending • 2 driven rollers via brake motor • Upper roller can be swung out to the front Rcodpfxod Ab H Ao Alted • Forward/reverse operation • Conical rolling by tilting the rear roller • Movable control panel Operating instructions in GERMAN Catalogue available at the following link:

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. Rcsdpfxefg E Hms Altod The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cesurbend 3-Roll Plate Bending Machine MRS 1550 x 140 Technical Specifications: Special features included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 1550 mm Maximum sheet thickness: 5.0 mm Pre-bending sheet thickness: 4.0 mm Roll length: 1550 mm Roll diameter: 140 mm Rjdpfx Aehrdmmsltocd Weight: 1360 kg Dimensions (L x W x H): 2320 x 850 x 1200 mm Motor: 2.2 kW Equipment: - Electrically driven top and bottom rolls - Swing-out top roll - Conical bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating panel - Safety cable - Values apply to St-37 / 240 N/mm² - CE marking

Stanje: novo, premer spodnjega valja: 140 mm, premer zgornjega valja: 140 mm, premer stranskega valja: 140 mm, premer valja: 140 mm, dolžina valja: 2.070 mm, najv. debelina jeklene pločevine: 4 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, - Capacity 2070 x 4 - Electrically adjustable trailing roller - Electrically adjustable lower roller (material clamping) - Digital readout for rear roller movement - Digital readout for lower roller movement (material clamping) - Infinitely variable speed control - Hardened rollers Rcedpfx Ashvr Nljltjd - Conical rolling - Removable top roller - Brake motor - Emergency stop - Documentation - 400V

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 300 mm Drilling stroke: 160 mm Tapping capacity: M30 Speed range: 100 - 1600 rpm Table size: 615 x 430 mm Drill spindle Morse taper: 4, short spindle MK Column diameter: 145 mm Feed rate: 0.1-0.2-0.3-0.4 mm/rev Distance spindle / table: 147 / 688 mm Motor power: 1.8 / 2.9 kW Weight: 450 kg Machine height: 1865 mm Features: - Automatic feed with electromagnetic feed clutch - 4 feed steps (0.1-0.2-0.3-0.4 mm/rev) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Spindle guard with electrical interlock - Digital speed display - Machined base plate - Motor 1.8 / 2.9 kW – 100 – 1600 rpm Special accessories included: - LED machine light, Pos. 12 - Tapping device, Pos. 20.0 (tapping with stop) - Coolant system “A”, Pos. 24 (base plate with integrated coolant system, complete) - Digital drilling depth display, Pos. 37.1 (5-digit LED display) Rjdsxabq Iopfx Altscd

Stanje: novo, Sheet thickness: 1.8 mm Bending length: 1050 mm Top roll diameter: 70 mm Sheet length: 1050 mm Rcjdpfxsd Ab T Ss Altod Details: - Cast iron frame - Motorized bending - Conical bending device - Manual adjustment of the rear and lower roll via handwheel - Mobile control panel - Compliance with CE standards Options: - Rear roll with motor: €825 - Digital display for rear roll position: €1,010 - Frame cover: €274 - Hardened rolls: €392

Stanje: novo, Drilling capacity in steel (diameter): 60.0 mm Tapping capacity: M 42 Rodpfx Aexabgioltocd Throat: 350 mm Drilling stroke: 200 mm Spindle speed: 60 - 1530 rpm Table size: 720 x 510 mm Drill spindle Morse taper: MK 4 short spindle Column diameter: 200 mm Feed rates: 0.15-0.2-0.3-0.36 mm/rev Spindle/table distance: 159 / 884 mm Motor power: 3.6 / 4.3 kW Weight: 605 kg Machine height: 1950 mm Features: - Automatic feed with electromagnetic feed clutch - 4 feed steps: 0.15 / 0.2 / 0.3 / 0.36 mm/rev - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Spindle guard with electric safety interlock - Digital speed display - Machined base plate Special equipment included: - Coolant system mounted in base, item no. 24 - Tapping device, item no. 20.0 - LED machine lamp, item no. 12

Stanje: rabljeno, Širina utora: 3-28 mm Dolžina orodja: max. 1200 mm Delovna hitrost: 3 m/min + 6 m/min Vlečna sila: 60 kN pri 3 m/min Vlečna sila: 40 kN pri 6 m/min Hod: 1050 mm Teža stroja: ca. 600 kg Redpfx Aeyz Dgdjltocd Vključuje veliko zalogo povlečnih igel