Kk-Industries Cyl 130-20/4.0 nakup rabljenega (56.567)

Stanje: novo, Bending length: 2050 mm Sheet thickness: 4 mm Top roll diameter: 130 mm Technical data: - Rear roll driven by motor - Conical bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and transmission system - Portable control panel Nsdpfx Aksd Ab Nwehjdc - Cast iron body - Manual adjustment of rear and lower rolls - In accordance with CE standards Options: - Top roll driven by electric motor – EURO 1,260 - Digital display for rear roll position – EURO 1,010 - Hardened rolls – EURO 1,352 - Special voltage – EURO 480 - Material infeed table - Bottom roll driven by electric motor We have a large number of references!

Stanje: novo, Dolžina upogibanja: 3100, Debelina pločevine: 4, Premer zgornjega valja: 170 Standardne lastnosti: Nsdpfxsd Ab Nmj Akhsdc Zadnji valj z motorjem Naprava za stožčasto upogibanje Kaljeni in polirani valji Ohišje iz jekla ST 52 Zgornji valj se po upogibanju bočno odpira za lažje odstranjevanje materiala Asimetrična zasnova za popolno upogibanje Za popoln rezultat sta zgornji in spodnji valj gnana z elektromotorjem z zavoro in planetnim zobniškim pogonom Ustreza CE-standardom Prenosna upravljalna konzola za upravljanje stroja z različnih mest OPTIONALNO EnotaKos Neto cena (€) Spodnji valji z motorjem1 1.205 € Digitalni prikazovalnik za zadnji valj1 815 € Podaljšani valji1 788 €

Stanje: novo, Bending length: 2100 mm Sheet thickness: 6 mm Upper roll diameter: 170 mm Technical data: - Rear roll motorized drive - Cone bending device Ndedped Ab Npjfx Akhjc - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electromotors and planetary gears in the gearbox - Portable control console - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 1,650 - Digital display for rear roll position EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 2050 mm Sheet thickness: 3 mm Top roller diameter: 110 mm Technical data: - Rear roller motor-driven - Cone bending device - Hardened and polished rollers - The entire frame made of St 52 steel - Main motor with braking system - Top and bottom rollers are driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron body - Rear and bottom roller movement operated manually - In compliance with CE standards Options: - Top roller driven by electric motor EUR 1,260 - Digital display for rear roller position EUR 1,010 - Hardened rollers EUR 1,136 - Special voltage EUR 480 Ndsdsd Ab N Aspfx Akhoc - Sheet feeding table - Bottom roller driven by electric motor We have a large number of references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - The entire frame is made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gears in the gearbox - Mobile control panel - In compliance with CE standards Ndjdpod Ab Nhsfx Akhsc Options: - Bottom roll driven by electric motor EUR 2,200 - Digital display for rear roll position indication EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: novo, Sheet length: 2100 mm Top roller diameter: 140 mm Sheet thickness: 4 mm Lower roller diameter: 140 mm Length: 4000 mm Ndsdpfjwhtdfox Akhoc Height: 1040 mm Width: 1140 mm Approx. weight: 2240 kg Technical specifications: - Hardened and polished rollers - Full body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movements of the bottom roller are hydraulically powered - Movable control panel - In compliance with CE standards Options: Central support – €6,479 Side supports – €4,055 CNC – €8,670 Material infeed table – €3,258 Speed control (variable) – €4,109 Automatic material discharge PLC control CNC control Automatic material feed system Interchangeable top roller Adjustable lower roller support system (customisable to customer requirements) We have many references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 4.5 mm Top roll diameter: 130 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Movement of rear and bottom rolls manually operated - In compliance with CE standards Options: - Top roll driven by electric motor, EUR 1,166 - Digital display for rear roll position, EUR 1,010 Njdpfx Asd Ab Nxjkhsdc - Hardened rolls, EUR 1,117 - Special voltage, EUR 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 1250 mm Sheet thickness: 4 mm Top roll diameter: 110 mm Ndodpfed Ab N Eox Akhsc Technical Data: - Rear roll motorized drive - Conical bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and lower rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor EURO 1,166 - Digital display for rear roll position EURO 1,010 - Hardened rolls EURO 827 - Special voltage EURO 480 - Material feed table - Lower roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 7 mm Top roller diameter: 190 mm Technical specifications: - Rear roller driven by motor - Cone bending device - Hardened and polished rollers - The entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gears in the gearbox - Portable control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor EURO 1,925 - Digital display for rear roller position EURO 1,010 - Extended rollers EURO 966 - Profile rollers EURO 1,190 We have numerous references! Ndodpjd Ab Nlofx Akhoc

Stanje: novo, Bending length: 2600 mm Sheet thickness: 4 mm Top roller diameter: 140 mm Sheet length: 2,600 mm Technical Data: - Rear roller driven by motor - Cone bending device - Hardened and polished rolls Ndsdpfx Aed Ab Nrokhjc - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearbox - Portable control panel - Complies with CE standards Options: - Bottom roll driven by electric motor EURO 1,513 - Digital display for rear roller position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 2050 Sheet thickness: 4.5 Top roller diameter: 140 Technical data: - Rear roller motor-driven - Conical bending device - Hardened and polished rollers - Entire frame constructed from St 52 steel - Main motor with brake system - Top and bottom rollers powered by electric motor, gearbox and gear system - Portable control panel - Cast iron frame - Manual adjustment of rear and bottom rollers - Compliant with CE standards Ndedpfx Aed Ab Nuskhoc Options: - Top roller powered by electric motor EURO 1,260 - Digital display for rear roller position EURO 1,010 - Hardened rollers EURO 1,489 - Special voltage EURO 480 - Material feed table - Bottom roller powered by electric motor We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5.5 mm Top roll diameter: 130 mm Technical specifications: - Back roll driven by electric motor - Cone bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system Nsdpfx Akod Ab Nyshjdc - Movable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor EURO 1,166 - Digital display for back roll position EURO 1,010 - Hardened rolls EURO 799 - Special voltage EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Leto izdelave: 2016, stanje: rabljeno, KK PULLTESTER KKP03A / Series 6 Year of manufacture: 2016 The KK Pulltester is a testing device for quality assurance in the graphic arts industry. It precisely measures the adhesive bond strength of individual pages in catalogues, paperbacks, magazines, brochures, and books. The number of pages to be tested, page number, job number, and book block length are programmed before the measurements. Technical specifications: Ndedpfowcd Iqox Akhec Language: German Book block width: approx. 5 - 35 cm Book block length: approx. 7 - 40 cm Book block thickness: approx. 7 cm

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Technical data: Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 3,800 mm Width: 1,750 mm Height: 1,700 mm Weight: 6,250 kg Equipment: Swing beam design NC preselect controller ELGO P 40 T with backgauge and blade gap adjustment directly from the control panel motorized backgauge up to 1,000 mm clearly arranged control panel mounted on a swivel arm hydraulic hold-downs positioned close to the cutting edge foot switch blade gap adjustment cutting line illumination wide support table with ball transfers foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot easily replaceable and re-grindable blades adjustable cutting length for economical operation bottom blade with 4 cutting edges upper blade with 2 cutting edges qualified after-sales service Ndodpevap Tuofx Akhsc operating manual in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 10 mm Cutting width: 3,200 mm Total power requirement: 15 kW Weight approx.: 7,700 kg Dimensions (LxWxH): 3,800 x 1,820 x 1,920 mm Technical specifications: - Sheet thickness: 10 mm - Cutting length: 3,200 mm - Cutting angle: 1.30° - Backgauge: motorized, 1,000 mm - Motor power: 15 kW - Length: 3,800 mm - Width: 1,820 mm - Height: 1,920 mm - Weight: 7,700 kg Features: - Swing beam shear design - NC pre-selection control ELGO P 40 T - With backgauge and cutting gap adjustment from the front via control panel - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on pivoting arm - Hydraulic hold-downs positioned close to the cutting edge - Foot switch - Cutting gap adjustment - Cutting line illumination - Wide support table with ball transfers - 1,000 mm foldable finger guard - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy blade replacement and regrinding - Adjustable cutting length for economical processing - Bottom blade with 4 cutting edges - Top blade with 2 cutting edges - Qualified after-sales service - Operating manual in ENGLISH Ndedpfx Aksvap Thjhec - Machine and equipment compliant with CE regulations

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Working table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Nsdpod Aca Aofx Akhsdc Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 16 mm Cutting width: 3,200 mm Total power requirement: 22 kW Weight approx.: 10,600 kg Dimensions (LxWxH): 3,800 x 1,950 x 2,080 mm Technical specifications: - Sheet thickness: 10 mm - Cutting length: 3,200 mm - Cutting angle: 1.30° - Backgauge: motorized, 1,000 mm Ndsdevap Tnjpfx Akhjc - Motor power: 22 kW - Length: 3,800 mm - Width: 1,950 mm - Height: 2,080 mm - Weight: 10,600 kg Equipment: - Swing beam shear design - NC pre-selection control ELGO P 40 T - With backgauge and cutting gap adjustment from the front via the control panel - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on swiveling arm - Hydraulic hold-downs positioned close to the cutting edge - Foot switch - Cutting gap adjustment - Cutting line illumination - Wide support table with ball transfers - Foldable finger guard, 1,000 mm - 1 T-slot side gauge - 2 sheet support arms with T-slot - Easy blade change and regrinding - Adjustable cutting length for economic processing - Lower blade reversible on 4 sides - Upper blade reversible on 2 sides - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total installed power: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Technical data: - Sheet thickness: 13 mm - Cutting length: 3,200 mm - Cutting angle: 2.0° - Backgauge: motorized, 1,000 mm - Motor power: 18.5 kW - Length: 4,200 mm - Width: 2,050 mm - Height: 2,100 mm - Weight: 11,700 kg Features: - Swing cut design - NC preselection control ELGO P 40 T Touch - With backgauge and adjustable blade gap from the front using the EURO P 40 Touch control - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting line - Foot switch - Blade gap adjustment - Cutting line illumination - Wide support table with ball transfers - Folding finger guard, 1,000 mm - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy replacement and regrinding of the blades - Adjustable cutting length for efficient processing Ndedpfx Aod Ab Hmekhoc - Lower blade can be turned 4 times - Upper blade can be turned 2 times - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 2060 mm Sheet thickness: 4 mm Njdpfegickrsx Akhsdc Dimensions (LxWxH): 2700 x 2250 x 1400 mm Motor: 7.5 kW Weight approx.: 3000 kg Standard accessories: - NC control - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front adjustment of blade gap - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on rear safety guards

Stanje: novo, Blechlänge: 2060 Ndodpfxegick Ss Akhjc Blechstärke: 3 Standardzubehör NC-Steuerung Programmierbarer, motorisierter Rückanschlag mit 750 mm Hub Schattenlinienbeleuchtung 1 Stück Anschlagschiene mit Skala 2 Stück Materialstützarme 1 Stück Materialstützarm (bei den Modellen 1103, 1303, 1503) Fingerschutz Schneidlinienbeleuchtung Kugelgewindetrieb Schnittzähler Tragbares Fußpedal mit Not-Aus-Schalter Lichtschranke an den hinteren Schutzvorrichtungen Optionen 0–180° verstellbarer Winkelanschlag: 910 EURO Pneumatisches Blechstützsystem (hinten): 3.200 EURO Lichtschranke hinten (Sicherheit): 1.620 EURO Elgo P40T Touchscreen-Steuerung: 1.960 EURO Klinge für Edelstahl (statt Standard): 1.000 EURO Ersatzklingen (Ober- und Untermesser, 1 Satz): 2.350 EURO

Stanje: novo, Bending length: 1250 mm Sheet thickness: 4.5 mm Top roll diameter: 120 mm Technical data: - Rear roll driven by motor Ndsdpfx Akod Ab Nzehoc - Conical bending device - Hardened and polished rolls - Entire frame constructed from St 52 steel - Main motor with brake system - Top and bottom rolls are driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron frame - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor: EUR 1,166 -- - Digital display for rear roll position: EUR 1,010 -- - Hardened rolls: EUR 823 -- - Special voltage: EUR 480 -- - Sheet feeder table - Bottom roll driven by electric motor We have many references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 6 mm Top roll diameter: 200 mm Ndsdpfx Asd Ab Nfjkhoc Technical specifications: - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Complete frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel - Compliant with CE standards Options: - Bottom roll driven by electric motor: EUR 2,200 - Digital display for rear roll position: EUR 1,010 - Extended rolls: EUR 966 - Profile rolls: EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 7 mm Top roller diameter: 200 mm Technical data: - Back roller motorized - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel Njdpfx Akod Ab Ngehjdc - Asymmetrical design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes within the transmission - Portable control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor: EURO 2,200 - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!

Stanje: novo, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Data: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Backgauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via control panel Motorized backgauge up to 1,000 mm User-friendly control panel mounted on a swing arm Hydraulic hold-downs positioned close to the cutting line Ndsdpfxsxxd D Ue Akhoc Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Upward-folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Simple blade replacement and regrinding Adjustable cutting length for economical processing Lower blade, reversible 4 times Upper blade, reversible 2 times Qualified after-sales service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 16.0 mm Frame gap: 3,100 mm Total power requirement: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,200 x 2,050 x 2,100 mm Technical Data: Sheet thickness: 16 mm Cutting length: 3,200 mm Cutting angle: 2° Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,200 mm Width: 2,150 mm Height: 2,200 mm Weight: 12,900 kg Equipment: Swing beam shear design NC preselection control ELGO P40 Touch with backgauge and blade gap adjustment via controller (front access) Motorized backgauge up to 1,000 mm Clear control panel mounted on swing arm Hydraulic hold-downs mounted close to the cutting edge Foot switch Blade gap adjustment Cutting line illumination Wide support table with ball inserts Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade changing and regrinding Adjustable cutting length for economical processing Lower blade, 4-fold usable Upper blade, 2-fold usable Ndjdpfxsd Ab Hlo Akhsc Qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations