Stas Buildstar V7/V8 Ab 27M³-58M³ *Neufahrzeug* nakup rabljenega (18.881)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Bsdjvgrh Uspfx Agtswl Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. Bwjdjv T I Evopfx Agtsl We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2015, Wall line, izdelana za proizvodnjo sten za modularno proizvodnjo. Uporabljena pri švedskem proizvajalcu med letoma 2015 in 2021. OPOMBA: Prodaja se v obstoječem stanju. Dolžina postaje: 7000 mm Širina postaje: 2700 mm Postaja št. 1: Okvirna postaja CAD/CAM (vključuje dve pribijalni orodji) Postaja št. 2: Delovna miza Bjdpfoxv Arxox Agtjwl Postaja št. 3: Polavtomatski pribijalni most (vključuje dve pribijalni orodji) Postaja št. 4: Delovna miza - dvižna miza Postaja št. 5: Multifunkcijski portal CAD/CAM (vključuje štiri vijačna orodja in rezkalno enoto) Postaja št. 6: Delovna postaja - sprejemna miza - premakljiva bočno Postaja št. 7: Delovna postaja - prenos pod kotom Postaja št. 8: Delovna postaja - dvižna miza Postaja št. 9: Delovna postaja - prenos pod kotom Postaja št. 10: Delovna postaja - dvižna miza

Stanje: rabljeno, Leto izdelave: 2010, Die Lösung wurde für die Produktion von vorgefertigten Außenwandpaneelen für Haushersteller entwickelt. Das System besteht aus drei Hauptkomponenten: einer schienengeführten Nagelbrücke und zwei Arbeitstischen. Nagelbrücke: Die Nagelbrücke ist für das automatisierte Nageln von Paneelen mit vier Nagelpistolen konzipiert, die jeweils mit der gegenüberliegenden Seite verbunden sind. Das System umfasst vier Nagelaggregate, die das Nageln gemäß vordefinierten Nagelbildern an den jeweiligen Arbeitstischen automatisch durchführen. Das Nagelportal ist auf einem am Betonboden befestigten Schienensystem installiert, das es erlaubt, das Brückensystem bedarfsgerecht zwischen beiden Arbeitstischen zu bewegen. Das System ist mit Lichtschranken für Positionierungs- und Sicherheitskontrolle ausgestattet. Funktion: • Der schienengeführte Rahmen wird in einer neutralen Ladeposition zwischen den beiden Arbeitstischen positioniert. • Der Nagelvorgang wird von einem der beiden Arbeitstische aus gestartet. • Das gewählte Nagelbild wird automatisch ausgeführt. • Das Nagelportal wird aktiviert und führt den Nagelvorgang entsprechend dem gewählten Muster aus. Arbeitstische: Die Arbeitstische sind mit Auflagennuten zur Positionierung der Holzständer ausgeführt. Diese Nuten sind über Schiebemechanismen verstellbar und ermöglichen so die Anpassung an unterschiedliche Paneeltypen und Konfigurationen. Funktion: Bwsdpfoykqxdsx Agtel • Die Außenkanten des Tisches werden per Handsteuerung an das Paneel herangeführt. • Die ausgewählten Latten werden manuell positioniert, um die genaue Platzierung des Paneels zu unterstützen. • Der Bediener positioniert die zu montierenden Bauteile in die entsprechenden Nuten und gegen die Latten. • Das brückengeführte Nagelsystem wird aktiviert und führt das Nageln gemäß dem gewählten Muster aus.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: Bjdpofi Nmpsfx Agtjwl 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Bsdpfx Agegcw Riotewl Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: novo, največja dovoljena obremenitev: 28.840 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.660 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.350 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, STRONG & LIGHT, now also available for heavy-duty applications, from 40 m³ loading volume and 6,600 kg. High-quality aluminium chassis with high-strength steel body, ACTUAL 7,160 KG. Chassis with 3x 9t DCA axles, equipped with 430 mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting aid, aluminium drop-down landing legs (can be decoupled when loaded), foldable underrun protection, digital load gauge for axle load indication, toolbox, access ladder. Body made from HB450 steel sheets, floor 5 mm thick, side walls and rear doors made from 4 mm HB450 steel sheets. Rear doors split 1/2 - 1/2 with a grain chute on the right, rear doors can be unlocked from the rear, doors sealed with round steel bar (optionally with rubber seal – mud-tight), roll tarp with central support tube, aluminium splash guard to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long casing, loading height = 3,650 mm. (The vehicles shown are partly equipped with special options) Further equipment details and a comprehensive vehicle quotation are available upon request. Various loading volumes, vehicle lengths, and heights are possible. Painting and equipment according to customer specifications. +€500 delivery charge Bwodpfohfiqcex Agtjl Offers and images are subject to change.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.179 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.800 mm, Oprema: ABS, * Stas premična tla Bwedoxu Th Uopfx Agtel * Pokrivna ponjava * ALU platišča * SAF osi * Lastna teža: 7790 kg * Leto izdelave: Interna številka vozila: 11498-----Pridržane so napake in vmesna prodaja

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.435 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.690 mm, * JOST axles * Air suspension * Lift axle * Wabco SmartBoard * Storage box * Aluminum rims * Tarpaulin cover Bwsdpfx Agev Hlwiotjl -----Internal vehicle number: 10290----Subject to errors and prior sale.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Bwsdjvwlqqjpfx Agtsl Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: novo, največja dovoljena obremenitev: 28.240 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.820 mm, prostornina tovornega prostora: 91 m³, Oprema: ABS, Stock No. 5559 New vehicle in stock – available immediately! Purchase, rental, or rent-to-own options available by arrangement! Side tarpaulin retrofittable at extra cost! Stas 91 m² moving floor trailer / 10 mm flat floor / TÜV load certification ---- * Manufacturer: Stas * Model: BIOSTAR - Moving Floor * First registration: - (new vehicle) * Colour: Galvanized chassis, body RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50 m length x 2.475 m width x 2.64–2.82 m height) * Gross weight: 36,000 kg * Unladen weight (vehicle registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle liftable / traction aid / disc brakes * Tyres: 385/65 R22.5 new on Speedline Diamond aluminium rims * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise/lower function * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box rear left * 21 floor boards, 10 mm flat Bodpfsv Emk Ujx Agtjwl * 12 pairs of recessed lashing rings in the floor * End caps made of welded aluminium * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall * Swing doors (50/50) with pneumatic locking * 2x locking rods * Pivoting cross member for door closure * Hydraulic connections at the front with 3 m hoses and * Connection possibility below the body without hoses * Operating platform with access front left * Fifth wheel height: 1,150 mm * Single wheel arches * Full-load support legs * Rear aluminium lighting guard (single-piece, foldable) * Roll tarp (900g/m²) with tension belts * Steel roof bows, folding, and lengthwise tension belts * 1x toolbox rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tyre pressure monitoring system * Aluminium underrun protection bumper at rear * 1x pull-out ladder, rear right * 2x LED work lights in front of the axles * 2x LED reversing lights, rear * 1x LED work light front wall, inside * 2 x 3-function lights in the top door cross member New vehicle in stock – available immediately! Purchase, rental, or rent-to-own options available by arrangement! Note regarding possible errors in the listing: Despite careful preparation, errors may have occurred in the text or specifications. We assume no liability for errors, changes, or intermediate sales. Information provided without guarantee. Please contact us to verify details or for further questions.

Stanje: rabljeno, skupna masa: 39.000 kg, prva registracija: 01/2013, naslednji pregled (TÜV): 07/2025, Oprema: ABS, Volume tipper 59 cubic meters All-aluminium construction Bodpfxevwhvpe Agtewl Unladen weight: 7,570 kg SAF axles with disc brakes Tyres: 60% tread remaining Good condition Belgian registration Price: €23,900 net

Stanje: rabljeno, Ta ponudba je za kromatografski sistem ÄKTA ready™. Bsdpsyitvpjfx Agtewl Enota je popolnoma funkcionalna in pripravljena za takojšnjo dobavo. Kromatografski sistem ÄKTA ready™ je platforma za enkratno uporabo, zasnovana za tekočinsko kromatografijo pri bioprocesiranju, povečevanju proizvodnega obsega in GMP-uregulirani proizvodnji bioloških zdravil, vključno z monoklonskimi protitelesi, rekombinantnimi proteini, virusnimi vektorji, nukleinskimi kislinami ter drugimi občutljivimi terapevtskimi produkti. Ključne značilnosti: - Enkratni, za enkratno uporabo namenjeni pretočni sistemi – odpravljajo potrebo po čiščenju in validaciji čiščenja med posameznimi cikli, zmanjšujejo čas nedelovanja ter minimizirajo tveganje navzkrižne kontaminacije. - Prilagodljivo delovanje – na voljo v več izvedbah (izokratna, gradientna, z variabilnim UV, razširjena) za različne potrebe čiščenja. - Skalabilna platforma – pretočni seti za nizke in visoke pretoke omogočajo podporo za širok spekter proizvodnih volumnov; sistemi se lahko nadgradijo od manjših do velikih procesnih zahtev, še posebej v kombinaciji z večjimi modeli ÄKTA ready™ XL. - Zasnovano za GMP okolja – obsežna dokumentacija in regulativna podpora pomagata izpolniti zahteve skladnosti v regulirani biofarmacevtski proizvodnji.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, številka stroja/vozila: S 659, Funkcionalnost: popolnoma funkcionalen, popolnoma funkcionalen in v dobrem stanju Bwodpsyr E Shefx Agtol

Stanje: novo, največja dovoljena obremenitev: 29.560 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Oprema: ABS, Stock no. 5640 Purchase, rent, or rent with a purchase option by arrangement! Approx. 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS * Model: FARMSTAR – Agricultural Moving Floor Trailer * First registration: - (new vehicle) * Colour: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500 * Capacity: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle lift axle + traction aid / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25 m * Suspension: Air suspension with raise and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer’s spec): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and rear left operating console * 21-board floor system, 6 mm ribbed * Welded aluminium end caps * Rear closure plate in aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue discharge wall with brushes and stainless steel handles * Front wall made of aluminium plank profiles * Service door in front wall * Side walls with smooth finish inside and out (grain specification), fully welded * Observation window on left rear side wall * Swing doors (50/50) * 4x locking rods * Swivelling cross member at the door closure * Hydraulic connections front with 3 m hoses and * Connection possibility under body without hoses * Pressure 1" female * Return 1" female * Operator’s platform with steps front left and right * Fifth wheel height: 1,150 mm * Single wheel mudguards * Heavy-duty landing legs * Rolling tarpaulin (900g/m²) with quick-lock system * Foldable aluminium roof bows * Foldable aluminium rear light protection * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left * 1x aluminium step ladder, 2x 8-steps, mounted right * 1x extendable ladder at rear, right side * Smartboard * TPMS tyre pressure monitoring system Bsdpoxl Ntuofx Agtowl * 5-chamber LED tail lights * 2x LED work lights in front of axles * 2x LED reversing lights rear * 1x LED work light, front wall interior * 2 x 3-function lamps installed in upper door cross member Purchase, rent, or rent with a purchase option by arrangement! Notice regarding possible errors in the listing: Despite careful creation of the listing, there may occasionally be errors in the text or details provided. We accept no liability for errors, changes, or prior sale. All information is without guarantee. Please contact us to verify details or for further inquiries.

Stanje: novo, Leto izdelave: 2027, ZEROLABOR ROBOTIC SYSTEM for Timber Frame Construction The Randek ZEROLABOR robotic system is a production cell in which various work processes are performed fully automatically by robots. The system is flexible and can be configured to customer specifications. The robotic cell can be integrated into existing production lines or operate as a standalone unit. The system enables the nearly fully automated production of walls, floors, and roofs in timber frame construction. Automated Processes: - Panel handling: Panels are removed from different stacks using vacuum lifters and placed onto the timber frame construction according to the CAD file. The system is flexible and can handle various panel sizes. Bedpfx Ajduub Uogtowl - Fastening of panels using screws, staples, and/or nails. - Creation of recesses for electrical installations, windows, etc. - The system can process 1, 2, or 3 panel types. - Component marking with inkjet. - Gluing. - Waste handling: plasterboard waste and OSB waste are, for example, placed at defined locations or, if necessary, directly into the waste container. - Effective dust extraction. - Alignment of the component with the worktable. - Positioning of studs prior to nailing; precise placement of nails/staples into the studs.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Randek JS400C end-trimming saw is designed to create cut-outs at the ends of timber pieces, for example, to accommodate a tie beam in vertically oriented studs. The machine pneumatically clamps the timber and performs two cuts with its two 400 mm diameter saw blades. The maximum cutting length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. Operation is quick and easy via foot pedal. Function description The timber section to be notched, e.g. a stud, is pushed into the covered saw slot up to the set stop. Any protruding end is supported on a roller stand (not included). Pneumatic clamping and the sawing cycle are activated via foot pedal. Technical description • Notch depth: 30–115 mm • Notch length: 10–380 mm • Timber thickness: 30–70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5–0.8 MPa (5–8 bar) • Saw blades: Carbide-tipped, 400/30-3.5/2.5/40 Safety The saw is well guarded by a cover plate to prevent accidental contact. When the cover is opened, power is automatically cut off, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting • Flexible and easy to set up Bwedped Arwhofx Agtsl • Simple to operate • Adjustable working height and foot pedal operation ensure ergonomic working conditions for the operator

Stanje: novo, Leto izdelave: 2026, Tilting Table Combination for Timber Frame Construction – BS20 The Randek Tilting Table Combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable structures with timber or metal frames. The tables can be operated as standalone units or integrated into production lines. Perfectly square building components of high quality are ensured by the clamping function. The lifting and tilting of the components are performed through a controlled, manually operated process. This tilting table combination is designed specifically for the manufacture of prefabricated houses, enabling high productivity. The adjustable assembly height for building elements ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination was developed to efficiently perform the following processes: frame assembly, insertion of insulation material, stapling of plastic or paper films, and application and nailing of wall cladding. • Production of square building components. The pneumatic clamping mechanism along the long side of the master table presses the frame assembly into a square, high-quality, precise building component • Automatic tilting of the building component, manually controlled • Automatic raising of the building component Technical Description: • Lengths available: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Adjustable width between 2250 – 3100 mm; width is set manually and easily • The master table can be hydraulically raised up to 92°, the slave table up to 86° • Pneumatically activated pressing function on the long side of the master table • Stops 160 mm high • Both tables are, as far as technically feasible, covered with plywood. The plywood sheathing allows sub-components and beams to be placed directly on the table • Tabletops supported by a robust steel frame • Optimal working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly. Installation is straightforward Safety: Bjdpfx Ags Nn Hyetewl • Emergency stop switch on control panel • CE conformity Advantages: • Perfectly square building elements through the pressing function • Controlled automatic raising and tilting of the components • Ideal working height • Flexible width adjustment

Stanje: novo, Randek SPL728 Cut-Off Saw Computer-controlled, rotating, with LAN (Ethernet) connection for downloading or storing saw jobs (text file in ASCII format). The number of programs that can be stored is limited only by the size of the hard drive. Thanks to the graphical touchscreen (HMI), the operator can monitor all details directly on the screen or enter saw jobs manually. This minimizes disruptions in production flow. Saw blade: - Carbide-tipped, low-noise - 700 mm diameter / 116 teeth - 360° horizontal swivel - 90° to 28° tilting - 250 mm plunge depth Motor power: 7.5 kW. Automatically closing and locking safety guard made of plastic. Infeed table, available in lengths of 4.0 / 5.8 / 8.2 / 10.6 m Powered infeed roller, type IRO4-120. Transport rollers: 76 mm diameter, 400 mm roller length, 500 mm center-to-center spacing. Rear fence: 120 mm. 2 pneumatic hold-down devices. Feed direction: optional from left or right. Outfeed table, available in lengths of 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m Computer-controlled roller conveyor type LX. Guide roller for outfeed: rollers 76 mm diameter, 400 mm long. Rear stop 120 mm. 2 computer-controlled longitudinal stops, belt-driven. Stop 1 - designed for cut lengths down to 50 mm. Bedefg Tatepfx Agtjwl Stop 2 - traverses the full length of the outfeed table. Positioning of longitudinal stops and adjustment of cutting angles are computer-controlled independently. Maximum travel speed of longitudinal stops: 1 m/s. Wood infeed: 1 unit Return devices: 2 units Feed direction: configurable from left or right.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Delovna miza s stiskalno napravo in napravo za postavljanje Bwsdpfx Agjx Tdtnetjl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rundholz-Scanner mit zugehöriger elektrisch betriebener Ausrüstung und Bedienerstuhl *Leistungsstarker Hochleistungsscanner. Das System arbeitet mit sehr hohen Liniengeschwindigkeiten und ist somit die perfekte Wahl für moderne Sägewerke. • Liefert ein präzises Abbild von Ovalität, Konizität und Krümmung des Stammes. Beschädigungen und Äste werden exakt erfasst und berücksichtigt. • Einsetzbar an allen Rundholz-Messpositionen: Rundholzsortierung, Rundholzoptimierung und Holz-Dreheinrichtung in der Sägeanlage. • Misst die Rindenstärke. Das RS-Bark-Zusatzmodul erlaubt die Berechnung der tatsächlichen Stammgeometrie unter der Rinde. Diese Funktion kann gemeinsam mit der Rundholzsortierung nach Muster in der Sortieranlage verwendet werden, um die Notwendigkeit von durchmessergestützten Sortierklassen zu reduzieren. • Minimaler Kalibrier- und Wartungsaufwand. Einfache Kalibrierung, kein Bedarf an Expertenunterstützung des Herstellers im Austauschfall. Bwedpfxot Irffj Agtel

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 6 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17284006, skupna širina: 1.000 mm, skupna dolžina: 2.800 mm, skupna višina: 1.580 mm, skupna masa: 125 kg, vhodna napetost: 230 V, potreba po zraku: 12 m³/h, zračni tlak: 7 letvica, moč: 0,5 kW (0,68 KM), vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, Polavtomatski stroj za polnjenje tub MF10A, proizveden pri Medipac AB. Kapaciteta polnjenja je približno 24 tub/minuto. Ko je zalogovnik za napolnjene tube poln (pribl. 10 tub), stroj preide v stanje pripravljenosti (Stand by). Ko se napolnjene tube odstranijo iz zalogovnika, se stroj ponovno samodejno zažene, kar omogoča enostavno upravljanje z enim operaterjem. Stroj je opremljen za format Ø25mm tablete in tube z zunanjo premerom Ø29mm. Drugi formati na zahtevo. Dokumentacija (v angleščini) na voljo. Bwodpfx Asxqf Rmsgtel

Stanje: pripravljen za uporabo (rabljen),

Stanje: rabljeno, Tračna žaga Proizvajalec: Waco Jonsered AB Model: Bandresaw BK60 Leto proizvodnje: 2015 Teža: 8.000 kg Bodpfewv S Acex Agtswl Hitrost podajanja: 10–60 m/min Maks. višina reza: 300 mm Maks. razdalja med tračnim listom in vodilom: 235 mm Maks. širina podajalne enote: 400 mm Min. razdalja med tračnimi listi: 10 mm Podajalni valji, premer: 165 mm Podajalni valji, višina: 300 mm Pogon koles tračne žage, premer: 1.080 mm Pogon koles tračne žage, širina: 100 mm Hitrost reza žaginega lista: 42 m/s Motorji žage: 22 kW Podajalna enota (frekvenčni pretvornik): 5,5 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 310712, skupna masa: 9.000 kg, nosilnost: 8.000 kg, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, trajanje garancije: 3 meseci, Oprema: dokumentacija / priročnik, peč, Großer Glühofen mit Rollwagen zu verkaufen. Hergestellt von Electro Heat Sweden AB. Bwedpfx Aoulu Nujgtol